I’ve been lucky enough to work with Larry a few times. The man’s a genius and just all Round positive problem solver. Some person on set will say something like, “that would have been cool if we could’ve done this totally impossible thing.” Larry would over hear the comment and be all, “I could make that happen. I just need a few minutes to build a (something only Larry knows).” And he on the fly will just design and fabricate some feat of engineering out of random stuff on set. He does it so humbly everyone wonders if he has any idea how genius he is at all. Making like it’s no big deal. Meanwhile everyone on set has their jaws on the floor at the physics and engineering he drops in real time on the fly. There’s only one Larry.
These are so damn cool! Your dad is brilliant. One thing I notice... the fence board at the lip is only 50% or less supported. Probly gonna split on you soooner or later. Easy enough to replace, but some more framing underneath would prevent this. (A couple chunks of fencing underneath, run perpendicular, screwed and glued would make it stout) Or extend the existing 'joists' for full support. Add construction adhesive between and it could go for years. Cheers, great work!!
Actually the 2x4 supports under the top plank should be reversed. this will support the plank right to the front. My instructions to Ryan were not a clear as he made them on his video.
Awesome! To be honest, I liked more your father's project... lol But thanks to share yours. I just made a ramp for my kids, with a few twists, just adapting to our trails reality. But the idea was the same ! Regards from Brazil !!!
Would be great to see a run down on the kids bikes and skills oriented for small riders. My ten year old is mountain biking obsessed and due to move onto a dual suspension bike but there really isn’t much on UA-cam that is quality like yours for the little up and coming shredders!
Haha. Love it. I built a big bejesus basic pkywood and two by wood frame jump last week. 18 inches at top. No curve. Not adjustable. It is good practice and gets me comfortable with air.
I wonder about creating a version of this with a bigger 4-5 foot jump with more adjustments along the lip... We have a 4.5' jump with an 8.5' radius. It's pretty steep and many people who come over to ride it have a hard time at first. Could be cool to adjust the slope/radius to be more mellow for others testing it out.
How long before Casey sends farther than you? That is a really impressive jump design, especially since there was so little waste and it fit easily in your car. Like they say, the family that sends it together....
Sweet for real! Just one (odd) question. You like photography and cinematic scenes, how come we've never got to see the marvelous view of those awesome looking triple peaks @ 5.22 before??
@@TheLoamRanger Just did a little espionage on Google maps and WOW have you done some mtb cherry picking choosing that spot to settle down on 👌 Looking forward to upcoming content, you guys always produce great content and that with an awesome quality!
I'm having a bit of issue with the measurement for the Lift Support. Can someone tell me what the height is supposed to at its highest (from the point which is 7" away from the edge, where both slanted cuts meet)? I tried to do a mockup of this using cardboard just to make sure and ended up with a Lift Support that was of the wrong proportion. Thanks!
I also wondered this, but knowing the height doesn't really matter if you use the offcut from making the frame rail. I've made a step by step guide which covers that. Hope it helps you! ua-cam.com/video/HdnQqOTBgTs/v-deo.html
Is there assembly instructions by pic or video? The description probably makes sense for the person who wrote it out but "until the wood is 1.5" thick" doesnt make sense as I cant change the thickness of a 2x4 or 2x6
Looks great! Have you run into any issues needing more support for that top plank? Wondering if it would help to have more resistance to the top board twisting. Thinking to have a try at building it.
C D, Actually the 2x4 supports under the top plank should be reversed. this will support the plank right to the front. My instructions to Ryan were not a clear as he made them on his video.
Not being a pain but i believe the lift support is missing a couple dimensions and the lip support is missing dimmensions for holes please correct me if im wrong about either
My daughter and I are looking forward to building this design, thanks! What glasses are you wearing, they look awesome and mine just broke. Do you have a link to them?
It went together easily in less than an hour. ua-cam.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
Yeah man last page I think you may need to recheck dimensions, believe its a 2x4, not a 2x6. And I also made this plan in Illustrator to scale if your interested in posting it
Or are you using the really tiny 2x6 scrap for that dimension? I managed to do it with a 2x4 and altered the holes. But yeah I can see it working a bit with scraps... 😅😅🤷♂️🤷♂️🤷♂️🤷♂️
@@TheLoamRanger Sorry bud I started building this a couple days after the video came out. I stalled out when it came time to cut out the lift support - it's missing a measurement for the height. I saw a couple comments asking the same thing, I was just waiting to see if any else figured it out.
Knowing the height doesn't really matter if you use the offcut from making the frame rail. I've made a step by step guide which covers that. Hope it helps you! ua-cam.com/video/HdnQqOTBgTs/v-deo.html
IMPORTANT: the link to the plans no longer works. It says that it's been blocked because it is "potentially harmful". Super disappointing, I wanted to build these ramps but I might not be able to.
I’ve been lucky enough to work with Larry a few times. The man’s a genius and just all Round positive problem solver. Some person on set will say something like, “that would have been cool if we could’ve done this totally impossible thing.” Larry would over hear the comment and be all, “I could make that happen. I just need a few minutes to build a (something only Larry knows).” And he on the fly will just design and fabricate some feat of engineering out of random stuff on set. He does it so humbly everyone wonders if he has any idea how genius he is at all. Making like it’s no big deal. Meanwhile everyone on set has their jaws on the floor at the physics and engineering he drops in real time on the fly. There’s only one Larry.
I think I am going to give it a try. I have really been missing having a jump at home and that one looks fancy. It looks like it can hold up forever.
those mountains near 3:15 look unreal. great video!
Jobe Copeland the mountains around Canmore are beautiful! Cheers Jobe 🍻
So I built this today. I goofed on a few of the steps but I’m still happy with how it turned out!
Thanks so much for this!
I’ve been talking to my little guys about jumps and can’t wait to build this for them to grow on... and use myself too! 😉🤘🏼
Chad Kehoe awesome! It’s a fun one for everybody.
Love the build😁 Family that stays together shreds together🤟
AJ SONIC heck yes!
Your dad is brilliant!
Thanks for the great plan! I know what I am building this weekend!
These are so damn cool! Your dad is brilliant. One thing I notice... the fence board at the lip is only 50% or less supported. Probly gonna split on you soooner or later. Easy enough to replace, but some more framing underneath would prevent this. (A couple chunks of fencing underneath, run perpendicular, screwed and glued would make it stout) Or extend the existing 'joists' for full support. Add construction adhesive between and it could go for years. Cheers, great work!!
Actually the 2x4 supports under the top plank should be reversed. this will support the plank right to the front. My instructions to Ryan were not a clear as he made them on his video.
You sir, are a genius, exactly what I am looking for. Much appreciated!
Awesome!!! I'll be building these this week for our sidewalk skills park.
thanks larry. these look awesome.
That is one sweet ramp build thx
Your dad is a freaking genius! I love it!
Lunch Ride very true! Glad you like it.
Awesome! To be honest, I liked more your father's project... lol But thanks to share yours. I just made a ramp for my kids, with a few twists, just adapting to our trails reality. But the idea was the same ! Regards from Brazil !!!
Would be great to see a run down on the kids bikes and skills oriented for small riders. My ten year old is mountain biking obsessed and due to move onto a dual suspension bike but there really isn’t much on UA-cam that is quality like yours for the little up and coming shredders!
Haha. Love it. I built a big bejesus basic pkywood and two by wood frame jump last week. 18 inches at top. No curve. Not adjustable. It is good practice and gets me comfortable with air.
Awesome design!! Just came across your video recently and ended up building my own. Thanks so much for the making the plans available!
So awesome, thanks Ryan and family.. will be building tomorow, will go good along side the manual machine/bike stand!
I wonder about creating a version of this with a bigger 4-5 foot jump with more adjustments along the lip... We have a 4.5' jump with an 8.5' radius. It's pretty steep and many people who come over to ride it have a hard time at first. Could be cool to adjust the slope/radius to be more mellow for others testing it out.
This is awesome! Thanks so much for sharing the plans.
Under the jump cam was awesome!
That worked really well. I might just make one for my backyard trail system I am building.
Thank you! I’ve come into the possession of a bunch of scrap wood, and have been trying to come up with ideas for it
My boys loved your ramp! What bikes do your kids ride? Cheers
You should make a teeter totter that can lock into place for a jump
This rocks man. Thanks for sharing the plans
Nice job!
thats awesome man thanks a ton. good luck and stay safe!!
How long before Casey sends farther than you? That is a really impressive jump design, especially since there was so little waste and it fit easily in your car. Like they say, the family that sends it together....
Shut Up and Ride MTB oh man he’s already more natural on jumps, that’s for sure.
Sweet for real! Just one (odd) question. You like photography and cinematic scenes, how come we've never got to see the marvelous view of those awesome looking triple peaks @ 5.22 before??
Simon Reuter you’ll be seeing more in the future :D We just moved to town late last year, so it’s our first spring/summer in Canmore.
@@TheLoamRanger Just did a little espionage on Google maps and WOW have you done some mtb cherry picking choosing that spot to settle down on 👌 Looking forward to upcoming content, you guys always produce great content and that with an awesome quality!
Perfect timing, just yesterday I was re-watching the backyard video trying to see how the version one ramp was built. Thanks.
Colin Forsyth nice! Good luck with the build 👌🏼
Nice, and I love the music!
Looks awesome! cant wait to make one (or two) of these. :D
Liked before I even saw the video. 🙂
Sick!!! Thank you buddy
done and it works!
that is just brilliant! 🤟
I will try to build it this weekend after cenverting it to cm.
A Quick question, what bikes are the kids riding? My son is asking.
Timothy Eichmann sweet! Casey is on a Rocky Mountain Reaper 24 and Tom is on a Norco Fluid 24.
@@TheLoamRanger Thanks, I will look into them. My youngest one is 11y and wants an upgrade.
Should add some backpack straps for those long hauls hey maybe you could pack it on your bike😁
Family fun Jump line
I went ahead and got the MTB Hopper Coach. LOL Then, I will likely get another or a landing one. :)
I'm having a bit of issue with the measurement for the Lift Support. Can someone tell me what the height is supposed to at its highest (from the point which is 7" away from the edge, where both slanted cuts meet)? I tried to do a mockup of this using cardboard just to make sure and ended up with a Lift Support that was of the wrong proportion. Thanks!
Me too bro, anyone know that measurement?
I also wondered this, but knowing the height doesn't really matter if you use the offcut from making the frame rail. I've made a step by step guide which covers that. Hope it helps you! ua-cam.com/video/HdnQqOTBgTs/v-deo.html
Awesome 👍
That’s so cool
...why dont you show a step by step build guide video?
Hi, I've made a step by step guide. Hope it helps you! ua-cam.com/video/HdnQqOTBgTs/v-deo.html
Cool design and great quality. Nice work looked like it worked awesome. Thanks for sharing thumbs up from me.. :P
Black 'n' yellow bike looks awesome! 🤙
Is there assembly instructions by pic or video? The description probably makes sense for the person who wrote it out but "until the wood is 1.5" thick" doesnt make sense as I cant change the thickness of a 2x4 or 2x6
A 2x4 is in reality a 1 1/2" by 3 1/2".
I want to start a MTB UA-cam channel and just recently got a GoPro any suggestions?
The link for the plans looks like it’s being blocked for some reason.
Just updated it! Sorry about that!
what pencil is that? lol I want one!
Maybe I missed it in the plans and video but you have 2 sets of ramp supports that aren’t shown how they connect
Looks great! Have you run into any issues needing more support for that top plank? Wondering if it would help to have more resistance to the top board twisting. Thinking to have a try at building it.
C D, Actually the 2x4 supports under the top plank should be reversed. this will support the plank right to the front. My instructions to Ryan were not a clear as he made them on his video.
Can you do a video on a how to build this? I bought the parts and it would help a lot if you could
Hi, I've made a step by step guide. Hope it helps you! ua-cam.com/video/HdnQqOTBgTs/v-deo.html
Hey I’m trying to put this thing together. Does anyone have an tips or better pictures how to assemble it?
I've made a step by step guide. Hope it helps you! ua-cam.com/video/HdnQqOTBgTs/v-deo.html
do you als have a plan in metric?
Use Google to convert the measurements.
I wish. Haha
What is the best editing software for GoPro?
Not being a pain but i believe the lift support is missing a couple dimensions and the lip support is missing dimmensions for holes please correct me if im wrong about either
I've made a step by step guide which covers how to size up the lift support. Hope it helps you! ua-cam.com/video/HdnQqOTBgTs/v-deo.html
Hey!
could you reupload the link. When i try to open it. it says it has been blocked.
My daughter and I are looking forward to building this design, thanks!
What glasses are you wearing, they look awesome and mine just broke. Do you have a link to them?
Believe he's sponsored by Smith Optics
Smith wildcats
Ha ha! “No worries.” Is that a reference to Kai, the camera guy?
Will Evans I’d like to say yes, but ... no. 😂
what bike rack is that?
It went together easily in less than an hour. ua-cam.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
The link has been blocked by bitly. Super bummed, was going to build this next weekend for some at home training
Updated the link sorry about the delay!
the link does not work anymore :( any way you can re upload?
Done :)
What glasses are you wearing? Great Vid. Revy looks awesome
scott dickson he is wearing a pair of Smith wildcat
Wildcats! And that’s actually Canmore 😀
The Loam Ranger my mistake. Should have recognized Three sisters
Pair these jumps with the. adjustable drop @theshredist built
Dylan Bikes & Things perfect combo 👌🏼
is this link still good? it says it was block by bilty as potentially harmful. I don't know.
Updated!
Here’s the downloadable plan:
*UPDATED *
www.dropbox.com/s/t5k29j7aom8csxt/Bike Ramp Build Procedure.pdf?dl=0
🤘🏼🤘🏼🤘🏼
thanks!
On the last page of the plans it does not have the overall height of the piece
@@travisferguson5030 id assume its not a 2x6 and that its a 2x4 because the 48in 2x6 pieces make up 8 feet total of the single 2x4x8
Yeah man last page I think you may need to recheck dimensions, believe its a 2x4, not a 2x6. And I also made this plan in Illustrator to scale if your interested in posting it
Or are you using the really tiny 2x6 scrap for that dimension? I managed to do it with a 2x4 and altered the holes. But yeah I can see it working a bit with scraps... 😅😅🤷♂️🤷♂️🤷♂️🤷♂️
🤙
It looks like the couple comments about the missing height measurement for the lift support have been deleted. Did anyone figure this out?
Hmm that’s odd. We haven’t deleted anything! I’ll see about getting that measurement.
@@TheLoamRanger Sorry bud I started building this a couple days after the video came out. I stalled out when it came time to cut out the lift support - it's missing a measurement for the height. I saw a couple comments asking the same thing, I was just waiting to see if any else figured it out.
Hi mate, thanks for the plans.....did you get that measurement?
Knowing the height doesn't really matter if you use the offcut from making the frame rail. I've made a step by step guide which covers that. Hope it helps you! ua-cam.com/video/HdnQqOTBgTs/v-deo.html
can you pin a link to the plans at the top of the comments? the links in the vid don't seem to work for me.
where are the blueprints?
Keren
Did you give yourself more slow mo than your kids?
Plans are no longer online
Reiupload link pls
Done!
Link dead :(
Updated the link!
I made this
"Just down the road from our house"... thats why you drove there by car...
Sorry could not resist :P Good Video otherwise ;)
IMPORTANT: the link to the plans no longer works. It says that it's been blocked because it is "potentially harmful". Super disappointing, I wanted to build these ramps but I might not be able to.
updated! Sorry about the delay.
Could it be that you simplified the design because you don't have Larry's awesome building skill set?
Just joking. Thanks for sharing.
Pas mal la rampe👌par contre ton vélo il est très moche 🤣
What bikes are your kids riding pls do a bike check
Warning: This URL has been blocked by Bitly's systems as potentially harmful.
This is what I see
Updated the link!
@@TheLoamRanger thank you!
First!!
401 viewer
BOrrrrrrrrriingnggngngngng
First
Bla bla bla bla blaaa
Here's the direct link to the plans since the bitly link is broken.
www.dropbox.com/s/t5k29j7aom8csxt/Bike%20Ramp%20Build%20Procedure.pdf