How to Change a water pump on a Toyota pickup
Вставка
- Опубліковано 7 вер 2012
- In this video I'll show u how to change a water pump and or just replace the gasket.
Almost all my videos are made using my iphone4 that includes pictures videos credits adding music voice over's and editing. Thank you for watching.
Check these links
It's good to be the king :
www.itsgood2betheking.com/
My wife's channel :
/ earthscrapersgirl
Lawrence's Facebook : / earthscraper69
Lawrence UA-cam channel : / earthscraper69 - Авто та транспорт
Just pick up one of these today and I had 1991 4 runner with the 3.0 and man this truck is so easy to work
Torque spec on water pump bolts for all Toyota 20R and 22R engines is 9 foot pounds. They should be tightened in 2 steps. Tighten until you get a little resistance, in a cross pattern. Start at one "corner" then go across the pump to the other corner for the next bolt, and so on. Second step is using the torque wrench set to 9 foot pounds, again using the cross pattern. I've done several this way and never had any leaks or problems.
gotta say this is probably one of the best how to Toyota repair videos I've ever seen good quality, short and sweet and to the point
+T Rave thank you very much for the compliment.
Just wrapped up doing the water pump on my '93 22RE Hilux.
Thanks to you and yours for taking the time and putting in the effort ("...I'm *tirred* of this...") to make this video. It helped a bunch -- largely by making me see it as doable by myself.
Cheers!
Your very welcome glad I could help.
Thanks for the vid brother! I'm getting ready to go on a 3,300 mile trip across the US in my 92 4x4 and wanted to see a water pump replacement in case it goes out on the road.
Thank you for the video. I just sat behind my husband as he changed out the radiator in his Toyota pickup. After he finished we realized that the truck is now leaking from the water pump. I hope that it is just the paper thing. Anyway thank you for making the next project look doable.
Thanks for the vid! Love the little Toyota pickup, especially with the steelies!
great job...you're a natural teacher, thanks for your info.
The water pump nuts and bolts are not called out with a direct torque specification, therefore it defers to the standard bolt specifications in the introduction section of the FSM (IN-18-19). The markings on the bolt and the use of a washer classify them as 6T hexagon flange bolt. With this information the toque table indicates the 6mm bolts (and nuts) should be torqued to 78in-lb (6.5ft-lb) and the one 8mm bolt should be torqued to 180in-lb (15ft-lb). Note that the long 8mm bolt engages steel not aluminum.
If you are replacing the thermostat, the torque called out on page EG-234 is 14ft-lb; however the same bolts are covered on page EG-236 with a torque callout of 9ft-lb.
Lol Lawrence I was driving back from norman this weekend and was snapping you about my buddies new Nissan 720. and on the way home my water pump went out :/ so I search a how to video....and you pop up hahahah should have guessed! thanks man!
That's to awesome your very welcome
Stellar video. Thanks for dumbing-it-down so that it makes sense to a non mechanic. I had no plans on making a gasket but after your tutorial, i think i'll start making my own. Great video and i'm actually looking forward to doing my water pump. BTW, bless you and you're beautiful family :)
+Larry Seelig thank you very much and your welcome in glad I can help other to save some money.
Realy good video.Helped me changed my H20mpump...Could have spend a lot for a mechanic.....You saved the day Lawrence!! Thanx a million...
+Bogart S your very welcome glad I could help
Thank you for your thorough explanation sir, couldn't get the fan off my water pump until I saw this! 🙏
+gogeta1001000 glad this could help thanks for watching
wow we are in need of knowing how to swap out our 95 pickup, this was very very helpful, thank you for putting this up, now we can do it ourselves.
Your very welcome glad I could help.
Thanks! I'm not sure what's dripping yet, but now I know what I'm up against. It's not as hard as I thought.
Hey, used your help to replace the water pump on my '98 Tacoma 2.7 I4. The results seem good, just wanted to say thanks!
Awesome glad it worked out and your welcome.
@CoolasIce2 And I did end up replacing it with a new one but this video gives people the option to do either. And thank you for the compliment.
thanks so much for your wonderful hearts and god bless your family always!!
Thanks. You made my day !
Thanks man have learned a lot from your vids. Keep it up.
@sideshow45 Oh that's neat that something I didn't know and now I do. Thank you and thank you for watching.
Thanks a million bud! I thought it'd be harder than this.
You the man! Thanks for the awesome video, brother!
Nice job Lawerence....you're a Natural !
Happy looking family too !
Good stuff !
Thank you very much
thanks heaps for posting this mate. you just made my life easier and saved me 450$ that i don't have. from across the world.
yet again another great video
Thanks bro great video it really helped
I think i may be swapping out my water pump here shortly, thanks for the instructional.
+Harley Fee your welcome
very helpful bro.god bless you and your family. happy long weekend..
+Alicat Alicatzu thank you and glad that I can help
@justasimpleman1 I would deff ask your local parts store to look that up or getting a book for proper specs. If I were to answer it would only be a guess. I do research before starting any project. Sorry I could not be more help. Thank you for the compliment and for watching.
Thanks for the video!! I have a question for you, I have a Toyota 4runner, two years older than your truck and it all seems to be in the same place as yours, would I need to drain the fluids out of the truck prior to removing the water pump?
Thanks so much for this vid, I'm dealing with this issue in my 89 Toyota Pickup
Your welcome
thanks dude. awesome video!!!
Mine self destructed too, out taking it off the truck today and FED EX showed with my new water pump. So, do I use a gasket sealant or not??
nice video! its really gonna help. im installing one soon. thank u!
nice video, very helpful thank you!
Thanks! I'm doing my 92 now.
Torque specs for bolts? I have a 85. I read it's 6.5ftlbs for most 6 mm nuts and 9 ftlbs for the 8mm long bolt
@eric andrade thank you i agree.
Gj bro.. may I know what are these torque for the bolts
How did you get 12MM bolt out of pump cover? Does it go through timing chain cover & thread into block?
Is there threads through the Timing chain cover itself? my bolt broke.
Did you have same problem? it looks like the hole in pump (where 12mm bolt was removed (largest bolt in Water Pump) is drilled?
Hello there great video but u forgot to teach us how to adjust the v belt tensioner thanks
Water pumps for these trucks are like $20 and include a new gasket. If your time has any value at all, just replace the pump if the gasket is bad.
+Wayne Manion
20$ my ass.
+contactmeghan $19.99 Reman shop.advanceautoparts.com/p/driveworks-remanufactured-water-pump-57-1219/20420603-P?searchTerm=water+pump
$21.75 BRAND NEW Shipped Amazon Prime www.amazon.com/Gates-42339-Water-Pump/dp/B000C2W9M8
I stand corrected.
Paid 50 bucks for a new one at autozone yesterday, life time warranty, came with a gasket
+Reos awesome some people don't have 50 bucks thanks for watching
hello there i your awsome with the video and channel , total of topic , information on timming chain on nissan 87 how much lag does it suppost to have ??? mine is making noise again even though i replaced the timming guides ??? please help the noise is really annoying thank you gaing for you videos keep up the great work
Awesome hope you had a great trip and your welcome.
Do you still have your Tacoma, and what is the mileage? I had a 2000 Tacoma but sold it back to Toyota because of frame rust. I have a 2013 Tacoma 4x4 now and love it! They are great trucks.
@Peter Puglisi omg wow im sorry thats a crazy price and for a new water pump is closer to 65$ its amazing to me.
Nicely Done!
Thank you
I heard you need put it in timin I got a Toyota 93 pickup 4wd V6 3.L
Nice family thanks for the info ...
Your welcome
Yes that would be best to save your fluid If your going to reuse it. Also wait for the truck to cooldown before attempting anything.
my teacher of my class, JUST went over this how the water pumps will not blow out while driving they will release all the water and coolant as soon as the car isnt running. Super ironic that this just happend to a subscribed user lol
You had to take it out all the antifreeze before ?
Special note kids, the mating surfaces of the water to the engine block must be dull and not polished surface. The concept is that the surface must be "a bit rough" to allow the gasket to have something to grab onto for a better seal
I didn't have any issues with the bolts they all came right out.
Nice video dude. Just a quick question. Is your Toyota a 2WD or 4WD? I have to change my dad's water pump and didn't know if there was any difference in 2WD or 4WD. Thanks.
thanks dude!
IT was a good video i like the baby and what sold me was the wife with the two thumbs up good job
Hmmm. My 1994 Toyota Pickup engine looks nothing like yours. I had to take off the timing belt cover and the water pump is turned by the timing belt itself. Maybe the 3 liter is significantly different?
Hi there it's a very interesting video.i have a 1989 toyota pickup which the engine is very ticking and knocking can you please tell me what it is? Thanks
Maybe rather than asking the person who made this what the issue is with your engine, using the most VAGUE description ever, you should consider taking your truck to a mechanic. Don't be a lazy cheapskate
Perfect video
Thank you
Bravo, sir.
Thank you
im swapping my motor but i have to get the pulleys off the old one, and i did the same as you removed the 4 nuts holding the fan clutch to the pulley but unlike yours which falls off like nothing mine is stuck really bad, i already removed the water pump since i had more access cause my motor is outside but i cant get the pulley off the water pump pulley even though the 4 nuts are off...any ideas anyone?
Soak it in Penetrating Oil
mines a 2 wheel drive and I dont believe theres any difference. you will be able to see once you gwt in there under the hood. thanks for watching.
I want too know where did u get aftermarket air intake
+Jose Angel eBay
awesome
Would this be the same as a 1995 toyota tacoma 4 cylinder?
I'm not sure I've never owned one sorry
Lawrence Duarte did mine...is pretty much the same but my gasket looked like a weiner and balls. Also fan bolts were a pain and rented a special tool from OReillys to break them loose. Clutch fan tool
Like a boss...
@Randallpresley93 good info thank you.
nice
great fxxking video big homie!
+Vic Morales Thank you
thanks!!!!
Thank you.
You're welcome
thanks very much
Your welcome
I just tightened up the water pump bolts to stop the leak.
Nice
Good job, but as long as you had the OLD pump out, it might have been a good idea to replace it anyway.
But my it’s a 94 V6 .. it’s different right
I would imagine yes its different
Good
Thanks
Lots of dinking around for a new gasket!🤣
Helps it all fit better lol
i wish my fan and pulley came off that easy cause they really wont budge..
How did u know ur wp was still good? How do u check it? A non mechanic here 🙋🏽♂️
I think I figured out that it was bad in the end so I still had to change it if it ain't leaking then it's probably still good. But if leaking out the front change it.
@@earthscraper69 gotcha. Thank you so much for replying. 🙏🏽🙏🏽
how many hours involved?
+david davies about 1 to 2 hours depends on your skill level
@matnew1984420 Thank you.
So much rooooom to work on
How long dose it take
Should only take a couple hours.
You make replacing a water pump look not so complicated. You seem to have done this in minimum time. Why is my mechanic suggesting that changing the pump and gasket will cost me 1600.00? Does that sound correct?
I have a 93 Camry.
That does seem expensive and I wish I had an answer for you. But without ever replacing one I don't know what's involved.
i have 91 hilux and did the water pump a few years back, water pump was something well under $200 can't remember exactly but $120 comes to mind and I can see them for that price on ebay, thermostat $25 or so, coolant $40? a friend and i took out old one and flushed radiator and put all back together in 2 or 3 hours (at leisurely pace). So mechanic could may be be expected to charge less than $500 for aftermarket replacement parts and labour to fit. If it's genuine parts I don't know. I'm talking Aussie dollars btw. I'm assuming you are NOT talking rupee or yen or something. good luck.
Cheers mate! Could of got the missus holding the camera though
dude why would you do all that all you needed were new rims
NICE EASY JOB BODY
Good video but. Why. Dont just. Put a brand new pump
In the end I believe I did.
Looks like a peen lol
Hope no one confuses your 4 cylinder engine water pump replacement instructions with the 6 cylinder water pump / timing belt replacement. instructions that , of course, are a completely different animal. My 02.
How do you tell your old water pump was bad or good.
My old one turns fine......
I bought a new one, anyway, 1977 toyota truck pick up, 20R.
But long time ago watched your video bought gasket was not BRAVE to attempt putting new gasket on old leaky water pump gasket.
Eventually leak got BAD......O'Reilly's said buy new pump.
I went to put new pump in then saw it had an extra bolt hole, where my old pump did not.
FREAKED out, got my gasket I bought rubbed sealant B4 replacing bolts old pump cleaned up like new.
Next morning started up but engine got HOT fast. New coolant all that good to go......I thought.
O'Reilly's said get new thermostat fail safe. Mine was only 2 years old, bought new fail safe. Old one spring easy to move think it was good.
👌 got new pump but it had extra bolt hole but figured it would not matter because old pump had solid metal there just put sealant all over again.
New pump leaked out as soon as I put NEW COOLANT in. My old one did not with new gasket. But engine heated up.
Switched a couple bolts around got better......still leaks here and there top & bottom.
I think I need to put sealant thicker cuz I did that putting old pump in, NO LEAKS.
But I do not understand how to KNOW water pump is BAD.
My problem was like yours old gasket disintegrated for sure thought it would not over heat so fast. Old cleaned up like new, turned inside fan and pully fan connection together synchronized.
But I did not then replace the thermostat.
Now nobody can get gasket....so I will have to make one........
Would you use the old cleaned up water pump or new one with extra hole.
The extra hole is to the right of the bigger center screw near the pully fan connection, like yours.
Hope to read your reply.
💋😘
Those are four nuts. Not bolts, bro.
lol, pay freaking 3 bucks for a gasket
But what if I don't ? .....
refers to NUTS as BOLTS
this guy needs to lose weight. his neck fat is compressing his wind pipe and pie hole. good video though.
+Chad Cooper I'm that guy and I'm going to have to completely agree with you you're absolutely right thank you for watching the video thank you for the compliment otherwise
Lawrence Duarte thats ok. i lost 30 pounds and it was REALLY tough but worth. Do your best man and hope I did not offend you. peace.
False economy🤣 Just buy a new gasket.