Cheapest YouTube !!! $1 DIY 1000°C Soldering Iron By Spark Plug
Вставка
- Опубліковано 26 сер 2024
- Hi guys ! Today I'm going to make a $1 soldering iron out of a Pen Case and truck's spark plugs!
I hope you enjoy the video and get great value from my ideas!
#diy
#solderingiron
#homemade
#howto
#magichand
#hot
Thank you for not putting the crap music with this. Glow Plug.
Glow Plug!?👍👍👍
Thanks for sharing, great idea
That is not a spark plug it is a glow plug but then you would not get any comments LOL - Also use - - 24 Volt.- Glow plugs are around 150 Watt. So 150 / 12 = 12.5 Amp - Most trucks are 24 Volt So 150 / 24 = 6.25 Amps.
Seems risky to the battery... They're not meant to continuously discharge amperage like that over long period of time... Plus it can create toxic fumes..
I was hoping someone would say that that IS A GLOW PLUG!!!
Yes he would ruin the battery in no time with constant super discharges~!! @@aninnymoose720
You shouldn't use a 12v glow plug to a 24v batteries, it will be destroyed by over voltage. I am an automotive technician, I have been using this for almost 5 years.
So much beautiful and like 🙏🙏🙏🙏👍👍👍👍
cool idea... it's called a glow plug
Thanks man 😍😍😍
Your presentation is impressive and I salute you, you already have 705k viewers and already had revenues from Y.T. I believed you already have funds to buy new pairs of side cutter or wire nipper and later for other things needed to your projects. God Bless
Thanks you ❤️
Good one~!!
it is glow plug (heating.plug ) of diesel engin for heating ďiesel in engin head when engin cool and use only for few seconds
Maybe I’m just too busy but this seems like an awful lot of work for something I can get for under $20
... лучше бы конечно написал на русском языке, а то непонятно ничего!!!
Have you ever bought a solder iron for $20? They're shit. Even the $50 ones don't last. At least the weller ones I've had certainly are meh.
While i agree mostly with what you said, if someone saw this and decided to perfect this technique.... So it looked a bit cleaner, maybe using a Dr. grip pen or something with a sightly better look than paint marker, then maybe that's a recipe for something cool.
not all of us are lucky like you we don't have such tools here 🙂
@@aninnymoose720 ….I totally disagree with you sir. I’ve got two soldering irons I’ve used for 12 years or more, they still work great.
Prietene in anii 80 - 85 erau aproape inexistente in intreaga lume nu numai in SUA Doar citva entuziasti si in general radiamatori s-au dedicat acestui subiect si cind a inceput sa i-si dovedeasca cu adevarat eficienta firmele producatoare (hotii de creere) au invadat piata asa cum spui la 20 de dolari Noi care am facut primele dispozitive in acest sens era ceva cu adevarat nou si era o mindrie ptru cel care reusea sa faca ceva aproape profesional cu mijloace putine si mult efort prin urmare nu meritam sa fim astazi descalificati considerind ca este o banalitate de mai putin de 20 de dolari Aceasta banalitate a inclus multa munca, efort si pricepere astfel nu trebuie desconsiderata munca celor multi la realizarea unui produs functional si necesar Ce vedem astazi sint rezultatul a sute de ore de gindire cautari si scotociri nu e chiar lesne de conceput o astfel de BANALITATE cum ii spui tu Nu valoarea conteaza ci puterea de a concepe si crea ceva util Chiar daca existau pe cale industriala destule si diverse erau mari si nu se adaptau ptru lucrari in electonica de inalta finete
I love it white is always right
By the way i subbwd cus if that and the content
*Excellent uploading with important information practically ❤️*
😻😻😻
@@MagicHandVN 1el mejor cauten.
@@donatolaime3548 😍😍😍
That’s a glow plug for diesel not a spark plug
I arrived at that conclusion also . I wasn't aware a glowplug would tolerate AC but I'm not a big time yt. Expert
@@Jim-ic2of that's DC from the battery! And they're built to work on DC in automotive🥂
@@A1948C Rodger . So are we on the expressway to the promised land? Ha.
,ac dc doesnt matter.. only use the rated voltage.
@@hmjeon8609 corect In realitate este o rezistenta si nu conteaza cu ce curent o alimentam este necesar sa se repecte doar U si A ptru care a fost construita Eu am asa ceva construit prin anii 85 si alimentat printrun Trf cu esire in trepte 8,10, 12 V la un curent 5 A in pauzele de lucru este mentinut la 5V ptru a se pastra cald si imediat ce este ridicat de pe dispozitiv ajunge la tensiunea setata si incalzirea de lucru Din 85 si pina astazi am schimbat cred 5 bujii incandescente si am lucrat puternic cu el nu a fost necesar sa depasesc U de 10 V nici odata
Did I miss the part where it shows this is a 12 v solder iron?
Gut !
Thank you!
SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER
Considering the heating element draws a lot of amps, section cable will not hold it for long...so this device is supposed to be use for short periods.
for same reasons, soldering all connections would be recommended, But idea is interesting
This device is supposed to be used for short periods????
Its a glow plug from a diesel engine
Which when running can be on for hours at high temperature
The battery will run out before any damage is done to the element
it is not a spark plug it is a heater plug/glow plug
for diesel engines
Thanks.
He's not telling you how fast that plastic marker tube will melt away! 😂 btw, 4.5 volt is enough for glowplug soldering. 😎
I still using every week
He's jealous and blind. Good job with the solder iron. You need Dremel rotary tool to help make cleaner cuts. Or a reamer to smooth that inner part. Definitely way cooler than i thought it'd be
@@aninnymoose720 Jealous and blind ? Are you feeling alright? 🤣
Colocando um controlador de voltagem fica perfeito e o usa em uma fonte.
❤️
No music 👍👍👍👍👍👍👍👍👍👍👍👍
Thank you sir
st tutorial i have ever seen GOOD JOB BRO
Thank you sir
Full support New friend is watching 🙏
Where do you get a glow plug for $1?
Vietnam
Scrapyard
Yes I want to purchase 12 for that price~!!
nice ❤
Thank you sir 💪
I wonder how the plastic parts of the marker pen did not melt? Oh! Forgot it! It suppose to be Magic!
It still hot 😅
Feery good
Thanks you sir
It verry hot
I still use it after 1 year
Is that a spark plug or a truck' s glow plug? The two are not the same !!!
Super!
thnx you are a legend brothers
😍😍😍
Thanks sir
use pùsh swich fo on off in this device because it will become damaged in few minutes
I think its Not an spark plug, Its heater of Diesel Engine.
Yes sir
@@MagicHandVN llllllllll Lo
It is diesel fuel heater not spark plug, and cost 20 usd
So we will need a solder iron to make this solder iron, doesn't sound right to me. And that is a glow plug, not a spark plug fyi.
Right bro that glow plug.. i'm confused spark plug😂
Super Fake 😂😂😂😂😂 but is Very Funny
remind me of the difference between a spark plug and a glow plug....
Don't believe but it really worked
It really work
I still work
A lot of work for a 5 dollar soldering iron from Harbor Freight~!!!
Great!
Thank you so much 🥰🥰🥰
Glow plugs for diesel engine
Not recommended for pcb wiring 1000degres c will surely destroys the printed board etching.
That's not spark plug but glow or heater plug used in diesel engine.
une bougie de préchauffage est conçue pour chauffer un petit moment et s'arrêter aprèsle démarrage, elle sera grillée si elle reste sous alimentation trop longtemps
ce n'est pas faisable
Good project, sir Congrats
Can u please inform what is the current consumption for 12V?
Thank You For Compliance
I Use 12v-10amp Honey Sources
I Don't Know How Much Wat Was It Consumption
But In 30s It Is Hot
I would love like step by step instructions. What you have done is really cool but for us that know nothing it would be great if you could give a lot more information. Thanks and very cool…..
@@lesacuculich8811 thank you man i will do this in next videos.
Thanks for your recommend
Have a good day sir
@@MagicHandVN 12VDC x 10 Amps = 120 watts
0:00 no sirve para plaqueta yo tengo uno que lo uso con estaño de 30 y 50 en la punta le puse un caño de cobre de la medida de la bujia lo arme con una planchuela y de mango con caño negro pvc de agua con cable de 4mm le doy corriente con un mini cargador de bateria es una bujia de motores diesel saludos.
its not spark plug .its glow plug
if I'm not mistaken, I think that's a glow plug, not a spark plug...
Yes sỉr
Heaterflag madaling mapundi yan
1000°c ?! I think that temperature is about 200 °c 😂
Over 450ºC you'll destroy a tip in minutes. All unregulated irons can go right to the landfill. And irons are far too cheap for this nonsense.
Its a "glow plug". ( Not a spark plug )
bonne continuation
Thank you so much 😍😍😍
Merci
😁😁😁
Does the spark plug short circuit?
glow plug not spark plug big difference
Hello Dear Sir, I am looking to boil 3 liters of water with a 12v warming plug connected to the mains current (alternating current) by means of a small transformer which receives 220v and gives 12v 1A output to the warming plug.Comment achieve it?
Thank you for answering me.
It work
You can find some other video about it on UA-cam
12V at 1A = 12W. You will be drawing your old age pension before the water boils!
Rebet amat bang, waktu buat bikinnya di buat kerja bisa buat beli solder baru canggih 4 biji,🤭
What is the specification of the wire used?
Not bad, duz the job.
التسخين هيكون كويس لكن فاشله الطريقه لان القصدير والبلاستك هيسيح خالص مع الوقت فى التشغيل
Using a soldering gun to to make a crap soldering iron. Lol
Good One~!!
ممكن توضح لي اخي ماهي هذه القطعه وفي اي محرك ديزل اجدها
Engine. Sir
that is heater plug
The guy doesn't know the difference between spark plugs and glow plug.
Can damage a battery
That is is not a spark plug! It is a heater plug!
Yes sir
Glow plug
Is it sparkplug? Or glow plug ?
That's a GLOW PLUG ! Not spark plug
Hey..You waana some best Shock treatments..just try this.🤪🤪😨
😅😅😅 that a nice compliment
ចូលប្រាប់បញ្ចូលចិត្ត
It's a glow plug, not a spark plug.
به نظر ادم فنی کاری میای ولی با کاتر اینجوری روکش سیم برداشتن یعنی قطع کردن انگشت
حلو استمر
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Nice info, thanks :)
Thank sir
By the way, that is a glow plug and Not a sparkplug.....huge difference. If you going to make a video get your facts right !
My friend that is a glow plug
Yes sir 😄
Nice 👍🏻👍🏻 🇮🇳 Kuki 16|07|2022
Thank you sir 😻😻😻
Pass!
I think the music stooped playing at 0:00 :(
Asrm sir 😅
I'm sorry to ruin your day but that is not a spark plug
This will destroy your Battery 💯 percent ..this is cheap but the Battery is expensive.. Better to watch other projects with circuits in other UA-cam channels.
и сколько минут такой паяльник проработает?5?
Why make a soldering iron when you clearly already have one
I borrow
Maybe because some solder irons break to fast. Now they have a spare. Plus, this is way cooler.
How did you come to the conclusion its 1000°C? 300..500°C should be enough.
...а пайка не растает от такой температуры?
استاداگه به برق ACوصل بشه مشکل پیش میاد؟ مثلا باادابتور به برق خانگی وصل بشه
آن فلزیه چیه
این قطعه چیه
هیتر دیزله
آداپتور دوازده ولت پنچ آمپر میخواد نمیصرفه
Save a life, don’t do this. Spend the $30 and enjoy life.
I meant no ill will towards the author/builder here. They may have the marbles sufficient to make and use things like this which is fine for them.
However the number of half-wits out there among us is staggering. These are folks that can rip their finger off with a roll of toilet paper. 👍
1000°C??? 🤔🤭🤣
😘
😘😘😘
👏👏👏👏👏🇹🇷
😻😻😻
SGT BER BAHAYA
MEMOTONG KABEL DGN CARA BGTU..
DPT MMOTONG TAPAK TANGAN.
KSH CONTOH YG BAIK
WILL YOU
TQ😊
Misslead information.
Itu apa ga meleleh
يتعذر التعليق لا أعلم .
Great now my pen don't work
Haha try not to luck
Bollocks not a spark plug it's a pre-heater from a diesel engine' diesel engines dont have spark plugs' get it right or dont bother putting crap up like this ..............
❤👍
ITS A GLOWPLUG NOT A SPARKPLUG
😄😄😄
that is not a spark plug
That is not spark plug
UA-cam at its best again.......NOT
Yet another wank idea
ha ha ha
I BET THIS CONTENT CREATOR WILL BE COLD AF IF HE PRODUCE A HORROR FILM...
😂😂😂😂😂😂😂
👃👃👃👍👍👍👍👍👍👍