Place the Spark Plug into the Electric Soldering Iron and Admire the Results
Вставка
- Опубліковано 3 жов 2023
- Hello everyone! You are watching video "Place the Spark Plug into the Electric Soldering Iron and Admire the Results"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup - Навчання та стиль
Well that’s 6 minutes of my life I won’t get back!
Me too, Sparkman
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
Wow! He turned a soldering iron into…… well, a soldering iron!
If you didn’t grasp the concept of what he did then please do everyone a favour and stay far far away from tools before you hurt someone
Soldering iron companies are discouraging electronics in USA.I learned professional soldering on gov projects using alloy tips and good solder no pitting on tips and little crud copper tips disinaagrate, and look at the suppliers they're making money with junk!!!Names like Unger were good and antex
@@samspade4050 What he did is stupid. He should learn how to solder properly instead of showing such ridiculous nonsense.
@@GettingNervous To look at this in a slightly different light, he has 387k views in 6 months. That' will bring in some of that sweet youtube money!
@@clarencegreen3071 And 3,120 likes prove that there are at least 3,120 stupid people.
Turn the iron on and tighten the tip.
Smooth ceramic will not sharpen anything.
589K subs....much better than 2...
Thank you for watching
No, but rough ceramic sure will.
I guess I don't see the point of spending that much effort to remove the center electrode to hack a soldering tip when you can make one with something like copper wires.
I used this part of spark plug because it has high thermal conductivity.
スパークフラグと半田ごてを合体させるなんて普通の人には考え付かないと思いますよ
あなたは素敵なクレージーです
Treba Pachistan ha, ha, ha
Hello my teacher... I am from Iran. I am proud of you.. I really enjoy it. good luck❤❤❤❤
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
سلام پویا جان . هموطن گلم صادقانه دوستون دارم
Good Idea. I love to see how you do
From New Hampshire USA
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Con el tercer episodio has puesto en peligro tus dedos
Gracias
Te veo desde Zaragoza - España
Hello! thanks for your comment. Wish you all the best!
Gracias por las ideas creativas y solucionador as de problemas de trabajos te felicito.de Venezuela
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
This explains the term "full circle". From a perfectly able soldering iron to waddaya know a working soldering iron, by simply changing the tip.
Thank you! Cheers!
Hello from Greece 😎😎😎😎😎😎
Boas ideias
Obrigado por compartilhar.
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
افكار مفيده) احتاج الى عمل محول كهرباء صقير لتحويل لمبه منزلية إلى ١٢ فولت ليعمل مع بطارية السيارة ) أعجبتني أفكارك
Welcome to Creation Holic channel! Thank you so much for your support
❤Thanks for such ideas. Good it improves me.Fr Malaysia ❤❤❤❤
You're welcome 😊
I would have just buy a new tip or clean the old one 😂😂
Hello! thanks for your comment. Wish you all the best!
Güzel iş güzel emek teşekkürler,🇹🇷
Thank you! Cheers!
Buy a TS101 Soldering Pen with adjustable soldering temp. Heats to useful temp in about 10 seconds.
do u think this is a video for someone that can buy anything....it's like saying be smart to a dumb person....
Thank you for all these great tips. Keep these ideas coming. Great video.
Brasil
Achei muito bacana!!!!!!!!!!!!!!!!!!!
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Wonderful. Im from Italy
Welcome to Creation Holic channel! Hope you have a good time while watching the video
ALWAYS KEEP YOUR HANDS BEHIND THE BLADE !
Hello! thanks for your comment. Wish you all the best!
That's a good idea Jaya. I am from Sri Lanka. Like to make use of a lot of things that are thrown away.Thanks🙏❤️🤝
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
Bonne idée! Merci.
Welcome to Creation Holic channel! Hope you have a good time while watching the video
For the soldering iron, I recommend to you, to use flux, there should be no problem of cold soldering with it.
Hello! thanks for your comment. Wish you all the best!
I've been fluxed up since junior high.... if you remember the 70's you weren't there 😂
الله ينور عليك يا هندسه ربنا يكرمك ويوفقك ويرزقك ويسعدك يارب العالمين
Thank you! Cheers!
شكرا على المجهود.. من الجزائر
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Si se necesita mas temperatura hay 2 caminos:
1: introducir a tope la punta original/o normal.
2: utilizar un soldador mas potente.
La seguridad y confiabilidad ante todo(durabilidad de herramientas y materiales)😉
hello! how are you?
Welcome to Creation Holic channel! Hope you have a good time while watching the video
thanks a lot for your tips, from Mexico
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
جيد...تحياتي من تونس......جربت الفكرة ممتازة
Thank you! Cheers!
Bravo très astucieux 👍👍👍👍de FRANCE
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Servirá también para afinar tijeras ✂️ de barbería.?
Estupenda idea, tengo problemas con mí soldador, lo pondré en práctica.
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Ideas inteligentes, Buen trabajo bro gracias por compartirlo
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
สุดเจ๋งจริงๆครับ 👍
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Just when I thought Id seen it all...
Garanhuns Pernambuco
Good job my best friend . U r amazing coach . But plz be careful dont hurt urself . I love you ❤
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
Estoy enamorado de este canal 😍
Welcome to Creation Holic channel! Thank you so much for your support
I always used an old ceramic saucer for sharpening scissors, your idea looks more efficient, thank you. Never cut toward yourself when using a knife, it could lead to some serious lacerations, an easier method of cutting notches would be to use a bench grinder, an angle grinder, or even a file. Instead of trying to tie a knot into your cotton, simply wind it stiffly around the wood and then apply some super glue whilst still holding the end of the cotton in your free hand, once the glue has been set, cut the loose strand off.
Hello! thanks for your comment. Wish you all the best!
for the scisors,cut a piece of sandpaper instead,lol
Sayın Arkadaşım.İyi niyetli,güzel çalışmalarınız ilgiyle izleniyor muhakkak.Ben sadece bu paylaşımda buji ile cam kesme doğru bir uygulama değil.İster çok yeni,isterse çok kullanılmış elmas olsun cam yüzeyinde tek çizgide görev yapmalıdır.Cam üzerinde git gel olmaz diye düşüncemi paylaşıyorum.
Hello! thanks for your comment. Wish you all the best!
I am from Brasil sp state
Welcome to Creation Holic channel! Hope you have a good time while watching the video
I was waiting for him to use the shards of ceramic insulator in DIY dentistry ...
Thank you for watching
Bugi rất tuyệt vời nếu biết cách tái sửa dụng
exactly
the heating element will not last ,not anof surface for the eat to transfer to the tip,,,,
very good , thank u much.
So nice of you
Awesomeness
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Wow--maybe that Platinum Nickel and Indium SPARK PLUG --tip will help improve this really lousy soldering iron tip I have that refuses to tin & solder properly --a real nuisance--I need to solder without any drama ---thankyou for the idea --I will definitely try it !
Thank you! Cheers!
Nice idea.
Thank you! Cheers!
What type of steel /metal-- has he extracted from that spark plug ?---is it copper or high carbon steel --he is using as a replacement soldering tip on the iron ?
Platinum, Nickel and Iridium alloys.
Basim Alharbi from Baghdad
teşekkürler
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Eu sou do Brasil
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Wait till someone tries that with tempered glass.
Thank you for watching
سلام بسیار عالی 🎉
Thank you! Cheers!
I’ve learned that you can’t cut spark plugs with scissors, you need an angle grinder.
Thank you! Cheers!
Brought to you by the Clicky Baity Channel 😂
آفرین . ممنون . من مدتهاست با لحیم کاری مشکل دارم . امیدوارم که جواب بده . اون وقت بار ها و بارها دالتون میکنم . علی از ایران اصفهان 🙏🙏❤
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
No entiendo para que malgastar el disco? Solo con romper la losa salía el electrodo?!!?😮😮
Hello! thanks for your comment. Wish you all the best!
soy de mauritania
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
4:02 lol , why not cut down the pop rivet as it was and use that rather than wasting all that time with the spark plug 🤦🏻♀️ that’s what I have been doing for years , and it so just fine . If you want too be really fussy - you could use stainless steel poprivits 🤷 .
I used this part of spark plug because it has high thermal conductivity.
@@creationholic101 I understand that is true - however I believe the overall result was more likely a coincidence , considering how thin the spark plug tip was , by the time you had Finished the modification - I think a side bye side test would show - That the same result would have come from using the cut dawn poprivit . 🤔
ممنون ازت ،خیلی طولانی میکنی ویدئو رو
Thank you! Cheers!
ปลายหัวไนท์เขาก็มีขายอันละ 17 บาทเองนะครับ
Thanks so much for watching our video. Wish you all the best
Thanks so much for watching our video. Wish you all the best
Wow amazing
Thank you! Cheers!
ojo el cautil esta con la punta mal ajustada
Hello! thanks for your comment. Wish you all the best!
A word to the wise: never smash spark plug porcelain near a vehicle. Porcelain and safety glass do not mix!
Hello! thanks for your comment. Wish you all the best!
This is a joke, right? Well, there goes six minutes of my life I won't get back.
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
I expected how to renew old spark plug...
Thank you for your feedback. I will think about a solution to this problem
take a piece of that ceramic ,throw it at a door car window,,watch what will hapene,,n,b,better do this on a scrap one,🤣
lo de la soldadura es tonteria lo que a hecho que se suelde es porque puso estaño en la punta en hacer contacto con el otro estaño que no se ablandaba antes. Hace que se ablanda igualmente en hacer contacto con el estaño fundido y no la punta del soldador
just use a soldering tip, they are cheap. and put solder on it next time. what a stupid waste of time.
Hello! thanks for your comment. Wish you all the best!
السلام عليكم انا منالعراق
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Have l missed something here ?
Your soldering trick didn't work because of the changes you made to the iron but rather because you acctually tried to solder it correctly after the changes.
Hello! thanks for your comment. Wish you all the best!
Pourquoi ne pas réduire l’épaisseur du bec du fer à souder avec une meule. Au lieu de casser un bougie et retirer la barrette
The spark plug tip conducts heat quite well
1:14 unless I see the scissors in the same frame = with out the unnecessary offscreen Segway to the plastic bag . I’m calling bullshit on this one The ceramic of the spark plug is not only rounded But also has a tuff glazed surface that is unlikely to be capable of sharpening anything as is . I am going to try this tomorrow . If I’m wrong I’ll be back to apologise . If I’m Wright ….I will be back tomorrow too confirm my suspicions. Crazy Ozzie OUT 👣. I WAS / AM WRONG IT WORKED 🤦🏻♀️ my apologies for my negative comment .🙏
I had done it and it has real sharpening effect. I would love to hear your feedback after you try it out.
@@creationholic101 will do 👍
It works 🎉
Why is the grinder spinning so slowly?
due to the recording speed of the camera
@@creationholic101 oh of course!
🇩🇿
❤❤❤❤❤❤
Welcome to Creation Holic channel! Thank you so much for your support
good
Thanks
one item with three extraordinary functions 6:11
Welcome to Creation Holic channel! Hope you have a good time while watching the video
O UA-cam deveria proibir certos videos
Please tell me this is serious and not intended to be humor!
Yes, this is serious
Jakol time 👍💯
Thanks you for watching my video. Wish you all the best
Türkiye van
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Go to hil😅
Thank you for watching
Dullest cutoff wheel I have ever seen.
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
Flippin heck....just go and buy a better soldering iron tip.....pennies !!!!!
Thank you! Cheers!
لا شيئ مفيذ.
Thank you for watching
Es una total tontera e ignorancia
Al colocar una punta mas corta se concentra la temperatura al mismo tiempo que se va quemando la resistencia por exceso de temperatura interna sin disipar ya que la punta normal hace de disipador termico
Hello! thanks for your comment. Wish you all the best!
Corect si cu logica
Poor soldering technique. People who don't know how to solder bring the solder to iron, let it melt and then bring it to the point where the soldering needs to happen. That burns the flux away. Solder without flux will not give a good permanent soldering connection. Just saying.
Naaa fake
The original problem of the soldering iron was the screw was loose to begin with.
Hahaha you realise you wrote that and everyone can see just how daft of a person you are no offence intended to you but you did write it.
Then he nearly burnt the other wire in half next to it.
Actually the problem was the iron was cold. Also didn't tin the iron with solder like he did with the new "Tip".
Problem is people removing your comments because they can’t take getting told they’re a bit dull!!! I wonder how long this one will stay up for before it gets removed 5 or 10 minutes.
The screw does absolutely nothing apart from stop the soldering tip from falling out and has absolutely nothing to do with heat transferring from the iron to the tip! What are we actually going to do if we have a global disaster with the sort of people and knowledge that they have got in their heads!! Humanity as a species is doomed with geniuses like the original poster of this reply left to replenish our species
👉🏼🤤💨🧠
it's really effective you can try it
Rarely have I seen such incredible nonsense.
It's very good, try it and feel it
نخست بدان وآگاه باش که =》خودت هستی《 پدرصلواتی هرکس فکرمیکنه همه مثل خودش یاکمی بهتر یابدتر ازخودش هستند&درقسمت۲سرشمع رو تبدیل به وسیله لحیم کاری مثلا داشتی خلاقیت بکارمی بردی وسیله لحیم کاری اول با وسیله لحیم دوم بسیارفرق داشت اولی "کهنه"و سری سیاه رنگ ؛؛اما دومی "نوع وجدید"بود وتازه از قوطی بیرون امده بود وبراز اولطن بار بودکه داشتی لحیم کاری میکردی . حتی برای یک بارم سرش به روغن لحیم هم نخوردبو .چون خودت فکرکردز چیزی نیست وکسی هم نمی فهمدمثل خودت ❤پس همه رامثل خودت حساب کردی اما گفتم همان اول که 》>》خودت هستی《
Thank you for sharing your feedback
KGB its better
Thank you! Cheers!
On the 2nd one it would have been easier and quicker to just TIGHTEN the screw holding the tip in instead of making a makeshift tip from the spark-plug. YES Everyone that watched saw the soldering tip was LOOSE so it wouldn't work.
Hello! thanks for your comment. Wish you all the best!
Useless hacks👎🏻
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
What a waste of time . Bullshit Click Bait
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention