How to install the AMD Sapphire Radeon Nitro+ RX 590 8GB OC Special Edition
Вставка
- Опубліковано 6 січ 2019
- We go over How to install the AMD Sapphire Radeon Nitro+ RX 590 8GB OC Special Edition to either upgrade your computer or building a newer one. Link for everything below.
Have the Sapphire 5700? I show you how to install it here: • Installing the AMD Sap...
Check out this video on Adjusting LED lighting on the 590: • Adjusting LED lighting...
Check it out on my Amazon Affiliate link: geni.us/CWSOO8N
Fractal Design DEFINE R6 Blackout TG Case: geni.us/a0dMjB
EVGA Z370 FTW Motherboard: geni.us/X9eVgAq
sapphire rx 580 nitro+ 8gb: geni.us/X9eVgAq
ARCTIC Freezer 33 eSports Heatsink: geni.us/ciPnLI
Intel Core i7 8700K Processor: geni.us/jD0s8D
Patriot Viper 32Gig 2800MHz DDR4 PVE432G280C6KGY: geni.us/wPWP1EO
EVGA GeForce RTX 2080 XC ULTRA: geni.us/SwBEU6
Sapphire Radeon Nitro+ RX 590: geni.us/CWSOO8N
Thermal Grizzly Kryonaut Thermal Paste: geni.us/xBKj
Kingston A1000 PCIe NVMe M.2 SSD : geni.us/BhJAQM
Samsung 850 Evo 500GB: geni.us/QTA2
Patriot Ignite 480GB SSD: geni.us/CdEvu
WD Blue 500GB SSD: geni.us/VdqB7
Kingston 240GB SSDNOW UV500: geni.us/mvwOPN
Cooler Master Silent Pro Gold 1200W PSU: geni.us/7hdBk
Please note, I had the EVGA Geforce RTX 2080 XC Ultra in the video previously, not to show an upgrade or a downgrade, just on how to change out the card (any card) to install a new card.
If you would like to purchase something through ThisBytesForYou's Affiliated Amazon Store, use the link below. Using this link will help the channel grow to bring you more.
Here is Global Amazon Affiliate link: geni.us/APnY buy from our link and help our channel.
In this video, we go over How to install the Sapphire Radeon Nitro+ RX 590 8GB OC Backplate Special Edition 11289-01-20G, How to install Sapphire Radeon Nitro+ RX 590 8GB OC Special Edition, kinda like how to install rx 590 fatboy and an rx 580 installation or a sapphire rx 580 nitro+ 8gb.
#ThisBytesForYou
#AMD
#HowTo
@SapphireTechnology
@AMD
As an Amazon Associate, I earn from qualifying purchases.
~-~~-~~~-~~-~
Please watch: "Your Gaming Chair and Floors NEED These!"
• Change your wheels quick!
~-~~-~~~-~~-~
#Sponsored - Розваги
In this video, we go over how to install the Sapphire Radeon Nitro+ RX 590 8GB OC Backplate Special Edition 11289-01-20G to either upgrade your computer or when building a newer one.
Check it out on Amazon: geni.us/CWSOO8N
.
Quick question.... Do I need to use two sperate PCIe cables from my power supply unit to connect this? Or if I have one PCIe cable that has two 6+2 connectors can I just use the one cable & the two different connectors on it for the card?
@@gkennedy0969 it's best to use 2 if you can, 2 cables and 1 connection per cable.
@@ThisBytesForYou
Thanks.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.@@gkennedy0969
Thanks for this vid, I was able to make it run properly. When I installed i forgot to conect the 8 pin power supply and cannot start my rig. Saw this and now it works like a charm.
thanks.
you are so very welcome my friend, I am so very happy I could help you. Please let me know if you have any further question on this or anything else. I have almost 300 videos on here, all aimed at helping. Thank you so much for stopping by and checking out my video, and even more for commenting, it means the world to me.
A complete step by step. Exactly what I needed. Massive thanks.
Thank you so much my friend, for stopping by and checking out the video and commenting, your kind words mean the world to me. I have tons more of these kind of how this, even on how to build an entire computer. Please check them out and let me know what you think. Also, if you have something you would like made that you are not sure of, let me know and I will see what I can do. Thank you
Cheers do you have a guide on fitting RGB fans? Just got these and no idea what I'm doing 😂
@@matthewwatts87 well, I need to get a motherboard with those headers. Make sure your board has those headers but to soon have a board with headers but I will surely call you out on that video for the idea. Thank you so much.
Thank you my man, although the video is almost a year ago uploaded, it's been really helpful today!
So very happy I could help you my friends comments like this make I do so worth it. Thank you so much for checking out my video and even more for commenting, it means the world to me.
Thanks for this video! Planning on ordering one soon to pair with my Ryzen 5 3600 I ordered today. Thanks for being so detailed especially when it comes to the drivers!
You are so very welcome my friend, very happy you liked it and so very happy to hear it helped you. If you could, please do use the global Amazon affiliated link in the pinned comment or description, it helps me out tons. I have a ton more videos here that can help you out on many other things and if you don't see it here, let me know I may be able to record something.
Same as ricky, I just installed my Ryzen 3600 last night and waiting for my Sapphire Radeon Nitro+ RX 590 to arrive, thanks for the video!
@@peteyquickk same! I got my 3600 and am gonna replace my grandpa 660ti with my new 590 nitro plus anniversary edition one, I still think it will serve us very well for 2-3 years to come
you are very welcome my friend, very happy you liked the video.
ahhh that will be a nice build, good stuff my friend.
Very helpful video mate, I just got the Shappire Radeon Nitro+ RX 590 (not the special edition though) and this tutorial is really good :D
Thank you so much for letting me know I have helped you and for stopping by and watching the video. I am so very happy I could help you. I have tons of these types of videos and getting ready to record another potentially next weekend.
Thanks man, that was a really good vid on the explanation of how to set up the nitro. 👍
Awesome my friend, so very happy you enjoyed it. Thank you so much for stopping by and checking it out, liking and subbing as well as commenting, it means the world to me.
Big thanks! I ordered this card today :)
Ahhh very cool, please come back later and let me know how it worked for you. I am sure you will love it
Thanks! Your video helped a lot, just installed the RX590 Nitro SE into a sonnet eGPU!
That's so awesome, I love hearing I helped someone, I love helping. So how much are you loving that shiny new beast. What kind of card did you come from.... Wait.. egpu... Are you powering a laptop with that beast?
@@ThisBytesForYou Thanks for writing, I have the egpu paired with a core i7 nuc. I love it, a big improvement over Iris 650 graphics!
@@arnoldbliss6238 ahhhh nice, I will be reaching out to them to see if they will allow me to review it, this might be cool and if I do get it, I will make sure to mention you in the videos ;) Thank you my friend, this might be cool but I am so happy I could help you, who knows, aside from your support here, you may have helped land a great review ;)
Im waiting on my new pc parts to arrive and this is the graphics card i chose. I'll make sure to rewatch the video if i have any problems installing drivers etc. Very helpful video for us newbies out there, keep up the good work :D!
you are so very welcome my friend, and I am so very happy you like the video and I do hope it helps. You are the very reason I make these, I want to help people just starting out because when I started, I wanted/needed help and no one would help me, so it took a long time, internet had just started, man I sound old hahaha. But anyway, I was a newbie at some point, everyone was a newbie at some point and you have made the exciting step forward and I am so VERY happy I could help you on that. Please remember, if you need any help, just ask and/or search my site, chances are I have already done it, if not, you could give me a great idea for a new video ad I will definitely mention you for the idea during the video.
Thanks again for your kind words and I hope nothing but the best for you.
Life saver! Thank you for the perfect instructions and valuable information!
You are so very welcome my friend, so very happy I could help you
i really appreciate u posting this video, it really helped
you are so very welcome my friend, so very happy I could help you.
I’m about to install following your guide thanks!
You are so very welcome my friend, I. So happy I could help you. Thank you for letting me know, it means a ton to me. Please let me know how it goes for you.
so how'd it go my friend?
Thanks for this post. Super helpful, just switched from Nvidia to AMD (that G-Sync tax, no thanks). Cheers
Anytime my friend, but there is no gsync tax anymore since freesync works with gsync now. Thank you much for stopping by and checking out the video, and even more for commenting, it means the world to me
As a mechanic with 5 years experience i was like: oh my god how over detailed is he demonstrating the install to the mainboard.. But as he came to the part of installing the software i really had to concentrate to understand what he is doing but i think that dudes with windows experience feel vice versa to how i felt haha 😂 To be honest i didn't even know that you had to do that.
I ordered a pc 4 days ago wich is kinda good but has a poor gpu and it didn't even arive yet so i already ordered the amd rx590 nitro+ so i can get started right away.
Good video
so, I get kinda mixed feelings on this, I think you liked it haha but I am not sure. Yes, I like to go into a lot of detail as to make sure not to miss anything, I know some people don't have experience while others have tons, so I try to help all and I try to take it to basics, so I am happy I could help you installing the drivers. You mentioned you had to concentrate on a portion, was something I was going over too complicated, I will be doing another video like this very soon (this weekend, and I want to make sure I cover it all.).
Thank you so much for your compliment on the video, I really do try hard and I want to make sure I get it perfect, so any input you could provide would be great. Thank you my friend.
@@ThisBytesForYou oh no need for mixed feelings the video was great, i just have no idea yet how to deal with this stuff in general but you explained it very well.
And yes for me it is to detailed but as you said, that way everyone gets it :)
@@jdmweeb1203 that's awesome, thank you so much my friend, for your kind words, it means a ton to me and I am so happy I could help.
@@ThisBytesForYou ur welcome
I still love the way this one looks.
thanks my friend, so very happy you enjoyed it, it is a nice card
Really thanks, This is what I'm looking for
you are so very welcome my friend, thank you so much for checking out my video and commenting, it means a ton to me. I really hope this helped you and if you have any other questions, please feel free to ask.
Thank you! Exactly what I needed for installing my Sapphire Radeon Nitro+ RX 590! I haven't built a computer in 15-20 years and things have changed a lot!
Now, I'm looking up some of your other videos on hooking fans up and cabling in general.
I love your step-by-step approach and that you show exactly what to look for and what it looks like.
Thanks buddy, so very happy I could help you my friend. I have close to 400 videos, so I am sure I have more that can help.
Just wanted to look how it looks like in a pc. I'm gonna buy it now, thank you!
very cool, so very happy I could help. If you could, please use my amazon affiliated link, it would help tons: geni.us/CWSOO8N
I legit thought there were water drops at first on the fan blades of that 2080 when you turned it over. That's a funky fan design.
nice, I didn't think they were water drops, I thought they were rips of 2 plastic pieces being assembled together then pulled apart, but when I looked closer it was part of their design, very cool of you to notice it too. Thank you so much for stopping by, checking out the video and even more for commenting, it means a ton to me. Thanks again my friend.
@@ThisBytesForYou Absolutely. Though I don't necessarily need help installing a card (I'm a computer forensic examiner), I did just buy an RX580 Nitro in blue (personal use, I have a quad 1080Ti setup at work to assist in password breaking operations) and wanted to comment on the fan blades. Maybe it's for aesthetic reasons only, but maybe it helps the overall CFM of the fan. Regardless, interesting video. Well done.
@@Pavewy I would think it would overall create more noise (dba), breaking apart the air which still may not be a bad thing, I am sure they researched it tons. Very nice rig at work CUDA is working out for you nicely. I built 2 VERY high end workstations for the CDC in 2012, each had 8 Tesla 2080's in (maybe they were 2050's) and I got to run one of their simulations for testing, CUDA destroyed that applications (I can't speak of what the test was) it ran VERY smooth. If your application for password breaking is written for CUDA, it is tearing apart those passwords in very little time, very cool. So very happy you liked my video my friend, thank you.
@@ThisBytesForYou The application I use is a very high end (and thus expensive) suite specifically written to utilize all CUDA cores on the operation. You are correct.
Have a good one my friend.
@@Pavewy ahhh very cool, CUDA is awesome, glad you are taking advantage of it. i hope you have a good one too my friend ;)
Thank you for this detail video, it was helpful
You are so very welcome my friend, very happy I could help you. Thank you so much for stopping by, checking out the video, it means a ton to me.
@@ThisBytesForYou Cheers!
@@max03tube cheers my friend ;)
I just built my first PC using this GPU. Can you explain more about the bios switch. thanks
The BIOS switch allows you to switch between Boost and Silent operation modes. Boost allows it to run as fast as possible and Silent, powers it down a bit, making it quieter but slightly slower.
@@ThisBytesForYou thanks!
@@mamba82481 You are so very welcome my friend, very happy I could help.
thank you i needed to watch this. I'm ordering a pc and a GPU so i needed this. plus i have never had a pc before and don't know how to do this stuff so this video helped.
awesome my friend, so very happy I could help you. I have nearly 400 videos, most of them are how to PC guides like this, I hope you subscribe and check out what more we have to offer you. We come out with new videos every Monday, I am sure we have more for you and if we are missing something, let me know, I might make a video on it.
@@ThisBytesForYou I'll make sure to check them out!
@@fault569 thanks bud, and let me know if you run into any issues
Great video! Straight to the point. Thank you
you are so very welcome my friend, very happy I could help you. Thank you so much for stopping by and checking out my video, and even more for commenting, it means the world to me.
You'd recommend me this card for a few years like 2019-2021 in fhd maybe 2k ? Thank you
2019, (which is when this was filmed and tested) at 1920 x 1080 yes, all day long, anyone that recommends any card passed 2019 is lying to you, no one knows what tomorrow brings, what game tomorrow will be released with AMAZING graphical accomplishments. What game are you looking to play and at what resolution?
@@ThisBytesForYou i'm very interested in play Cyberpunk77 but right now i have a Lot of games that i can't play because my graphic card is too old, it's the 660ti so i don't know either buy this one the 590 or wait until the 2020 umm 🤔😣 i'd like in fullhd
@@jeisongarzon6066 so the 590 is a great card, but the highest it will do playable is 1920x1080 with just about everything on. If you want to play at 2K and above, you will need a better card. For Cyberpunk, it should work, here are the system specifications
Minimum Requirements, Predicted
OS: Win 7 64
Processor: Intel Core i5-2500K 3.3GHz / AMD FX-8320
Graphics: AMD Radeon R9 380 or NVIDIA GeForce GTX 960 2GB
VRAM: 2GB
System Memory: 8 GB RAM
Storage: 70 GB Hard drive space
DirectX 11 Compatible Graphics Card
Recommended Requirements, Predicted
OS: Win 10 64
Processor: Intel Core i5-4670K 3.4GHz / AMD Ryzen R5 1600
Graphics: AMD Radeon RX Vega 64 Nano 8GB or NVIDIA GeForce GTX 1070
VRAM: 6GB
System Memory: 16 GB RAM
Storage: 70 GB Hard drive space
I would recommend 1080ti and above, sadly the Vega 64 is currently the highest and it performs on par with a 1070 at times with a standard 1080 (non TI). If you like I can recommend a 20xx series card if you are looking to buy now.
@@jeisongarzon6066 Wait for the RX5500XT
You can only wait for so long, this was 3 months ago my friend
men i also do need to uninstall drivers if i had the igpu from intel?
those will not interfere as much as AMD vs NVIDIA/NVIDIA vs AMD but I still do them myself as well, so I would recommend it. thank you so much for checking out my video and thank you even more for commenting. I hope I have helped you and please let me know if you need anymore help.
really helps me. thanks man!
You are so very welcome my friend, I am so very happy I could help. Please let me know if there is anything else I could help you with.
What a beautiful and legendary custom
thanks my friend, though this is already a 3 year old video.
Im doing crossfire for my first build that I’m doing in a couple months; I decided to go with 2 - xfx Radeon rx 570s 4gb. Together would these be enough power to run pretty much any game I want ? It’s going in with my ryzen 5 2600x
well yes and no and I will explain. Sadly, with Crossfire, it's not as supported as it use to be, there is little performance gain, very little, if at all possible. Although, the card is affordable right now. What resolution are you gaming in?
ThisBytesForYou 1920x1080 sorry for a late reply
@@themilkman9360 no worries my friend, I am here no matter what haha. So at 1920x1080, I think you should be good, will you have at least 16Gigs of RAM? Also, I would say you would be playing your games at medium quality settings
ThisBytesForYou I’ll send my pc part picker for a general idea - pcpartpicker.com/list/hMFgJb
ThisBytesForYou my brother has a friend who’s a computer science major, he builds stuff like this for fun so he’ll over clock for me but he’s been to busy to tell me bench mark capabilities, it will be water cooled however
i have purple screen after upgrade from gtx950 to rx 570 installing new driver , is something wrong ? but afrer restart all back to normal
wait. so is all working now?
@@ThisBytesForYou yes but i dont know on future is this safe ? this really happend u can see here community.amd.com/thread/240032
@@kikirizky1647 I understand what you mean, but after a reboot you are fine, I think you are perfectly fine.
SUPER helpful video. Thanks a lot man. i appreciate it a lot
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
You helped me thank you mate 🙏
you are so very welcome my fried, so very happy I could help. thank you so much for checking out my video and for commenting, it means the world to me.
ThisBytesForYou no worries mate , keep up the good work
@@user-bz7ek3he2y thank you so much my friend, I truly appreciate your kind words. Honestly, comments like your is what keeps me going, sadly I get so many negative comments that I want to stop, but every so often someone like you comes around that just makes me feel good again, thank you.
I have a gtx 1060 3gb card and I’ve decided to upgrade to this card. My 1060 3gb has lower performance than id like and had stuttering at high settings. I also love to take care of my components so i never put the settings too high due to its low VRAM. The 8gb would help a lot and the smart fans on this system would help my cards fans last longer. Do you know if this card is powerful enough to do little streaming? I stream with 720p 30-60fps and a few small icons. I havent set up my stream yet but i dream is to one day become a “influencer” Its a dumb name for a internet streamer/ overall content creater.
Also when i change cards will i have to delete my Nvidia drivers, updates, and apps like my g-force experience app?
Oh, and I subscribed.
Edit::::Oh, i got this card and hated the experience. Im getting a 1660 instead now.
Another edit:::: things haven’t gone as planned sadly, i think the original card i got was defective. I’m still using the 1060 but hope to upgrade eventually.
Hello my friend, thank you so much for stopping by, checking out the video, commenting and subbing, it means the world to me.
Upgrading to this card will provide you with more performance, but it would be a miniscule performance increase, to see a better improvement, maybe you might want to think about a 1660ti the cost will only be slightly more. You can find one here on Amazon: geni.us/ayWQB
If you have purchased it already, no problem the increase in VRAM will help, but again you will see a better improvement with the 1660TI.
Both cards will allow you to stream at 720 or higher, I would try to get to 60fps, at 30fps you vidoes and viewers will experiences chuggy videos.
Please let me know when/if you do upgrade to any of the card, i will definitely sub to you and I congratulate you and wish you the very best in becoming an influencer, its a rough road and takes a lot of commitment but if you set your mind to it, you can do anything.
As for drivers, yes, you will need to remove everything , use DDU like I showed you here and it will take care of it all, of course you will ned to changed it form AMD to NVIDIA. DDU is amazing.
Thanks again my friend and I wish you nothing but the best.
yeah the 1060 is a good card but 4 gb is necessary
@@JHorse508 JHorse508 yeah it is, but he already has a 1060, so I recommended instead of him wasting his money (waste in my opinion) getting the same card only slightly increasing the RAM, to get a 1660 instead, then he will see tons more performance and double his RAM. So it would be the regular cost he was going to spend on the 590, but get more performance and only pay about $30 more.
Vega 56
@@Sirtoastsalot what about it?
You started out wrong. First things you do are to turn the PC off and then, unplug it from the wall. I'm not trying to be a smarta$$ or confrontational. I only mention it because your vid seems to be meant for those who have little or no experience with any kind of PC assembly. I actually wanted to see how the card looked in the case I'm buying with it as part of a new build. Nice rig btw.
yeah I guess you are right, I do make my videos for those who do not have experience and maybe to help some that do have experience but might be confused about something, so I will mention that on my next one. Thank you so much for checking out the video and for commenting, it means the world to me.
@@ThisBytesForYou Thank you for understanding that I wanted to be helpful, not critical. I saw the way you corrected yourself in the vid concerning locking down the vid card with the screws before inserting the 8 and 6 pin connectors. That and the camera shots of how the retainer tab reacts to the video card insertion told me that you wanted to be as detailed as possible. Forgetting to power off and disconnect is sooo common, but can be so important. I work on factory equipment and LOTO (Lock Out, Tag Out) is a way of life. It says good things about you as a person that you care enough to be so detailed in your examples and explanations. Wish there were more like you frankly.
@@cy2087 thank you so much my friend for being so well thought out on your reply and for helping, I take everything as helpful unless there is not possible way for the message to be construed as helpful, haha. Yeah one of the main reasons I started doing videos is out of frustration and out of life lessons. I used to train people how to build PC's and use them so that got me interested and when I watched a video to do something, they would skip so much, because they knew how to do it, and didn't think about the reason they made the video, to show others, so I try to be as detailed as possible and show angles if possible but being that I don't go off of scripts or anything like that, it's easy to forget things. I will try my hardest to do this for the next video because you are right, it is 100% necessary to power down when doing this.
Actually last night, I was replacing an M.2 PCIE SSD doing some testing, and while the system was completely shut down, but not disconnected, as I was swapping the card, my system decided to turn out, I freaked and quickly flipped the switch off, but that was scary. So yeah, next one ;) I will make sure to mentioned you... if I can remember haha. Thanks again my friend.
@@ThisBytesForYou Lol, thanks for the compliment. Given that you used to train others and I haven't done my first build yet, (trying to get the cash) I'll be watching for your 'training vids'. Glad that mishap last night didn't lead to an injury or equipment loss. I've also heard that you should alwys wear an anti-static bracelet or touch the case frequently to discharge and make sure you don't short out components while working on your system. Anyway, glad to hear back and hope to see more vids in the future.
well thats great to hear my friend, thank you. Since you are starting off, you may want to look into 2 series' I have recorded, one of which (The Darkest Light build) I am still working on. These play lists provide unboxings of each product in the build as well as how to install each piece from the ground up, it might help you.
Boss Build
ua-cam.com/play/PLuWlEgp_PqJPLw_BLmXUmDMeHmBM-B7EQ.html
Darkest Light Build (Still adding more)
ua-cam.com/play/PLuWlEgp_PqJMgH49zr8e76TZ5EeEOW985.html
As for the anti static wrist straps (I may have mentioned it) I don't ever use them, the are uncomfortable, I do always ground myself by touching the case, I mention it in most of these types of videos,... though I may not on all.
Thanks again my friend, I so appreciate you stopping by and the conversation is great ;)
thanks man great work
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou done my freind have good day
Thank you so much for your kind words and support my friend, it means the world to me and I am so very happy I could help you, I hope you have a great day as well.
Thx bro helpful 👍👍👍👍
Always a pleasure my friend, so very happy I could help you.
if i only could afford a pc lol
slowly but surely my friend, it all start with 1 dollar, even one penny, save today to get started tomorrow. Save 1 dollar a day, you have 365 dollars at the end of the year, save more and earn more. Saving 5 dollars a week, you saved 260 dollars. When i was a kid, when I got home from school, I would drop all my change in a bucket, at the end of the year I would roll it all up and take it to the bank, I made 220 in one year,... I was a kid but I would sometimes not eat my lunch to save lunch money, you can start any time. How much loose change do you have laying around your house/apartment/room right now, throw it all in a jar/bucket/bottle and save.
Damn, not even God himself can afford a pc these days
@@jeisonstban yeah they can be pretty expensive, which is why I made a budget build, latest video out right now.
God get a job*☺️
even with a job sometimes its hard to save up, bills suck
Let's super downgrade our PC's
So, as I state in the video, I do this to show people how to remove their older cards, it in no way means I say the 590 is better than the a 2080, obviously it is not. It could have been a 2080 TI, a 5060, a 1080, 680, etc, it was just an example.
It's not that big of a downgrade, the card is still powerful
Great video, do you know if this can be SLI bridged ?
no my friend, that is for NVIDIA cards but you can Crossfire them for sure, check them on out my Amazon affiliate link: geni.us/CWSOO8N. Now, while this is a great card, have you see then RX 5700, I think that might be better for you, check out my review here: ua-cam.com/video/JNxiv21qcLs/v-deo.html, much better performance than a 590, for only a little more, and you don't need to crossfire them.
NICE VIDEO AND HELP FULL.. THANKS
Awesome, so very happy I could help you my friend, the pleasure is all mine.
@@ThisBytesForYou (^^)
Thank you so much. My cooling fan not working I though it has a problem, then heard once the temperature reaches to 60 degrees then colling will start.
You are so very welcome my friend, I am so happy I cold help you.
Hi mate, thinking about buying ryzen 5 2600 to enjoy this video card well, any advice if im doing wrong? Please.
nope, I think you will perfect with that but stay tuned, more coming you way ;)
Tq,god bless you❤
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. God bless you as well my friend, Thank you.
Thanks helps a lot
you are so very welcome my friend, so very happy I could help you. thank you so much for stopping by, checking out my videos and commenting, it means a ton to me. I noticed you have MewTwo as your thumbnail, I also have a few Pokemon and Pokemon Go videos here as well, please feel free to look around, you are welcomed to check it all out. Thanks again.
Hi, could you give me the link of where did you buy the pins for the video card? Thanks
IT came with the power supply, in this case: Cooler Master Silent Pro Gold 1200W PSU: geni.us/7hdBk but now I am using this one: ua-cam.com/video/Dv1qK2phCFM/v-deo.html
Hey, would I able to run a Powercolor RX Vega 56 with an Asus 320m-k and a 650 Watt power supply and what cpu would you recommend I'm looking at an Ryzen 5 2600 but I'm not sure. Thanks again sorry with the questions but I'm not the best with Pc's haha. keep up the great work :)
yes, for the standard VEGA 56 from Powercolor they recommend a 650, so you are good. The R5 2600 is a decent processor, fortunately/unfortunately for reviewing I need to buy the highest end although I am trying to put together a mid range and a low range system so that I can do better testing, it is rough being a small guy I have to pay for most of it, but I am still pushing to be able to bring everything to you. Thank you so much for stopping by and commenting, it means the world to me.
@@ThisBytesForYou Thank you for the reply, and yes it's very kind that you do I hope one day you get the recognition you deserve I will still be here for when that happens, have a good day :)
@@xOxyzz01 you are so very welcome my friend, I try my hardest to reply to everyone here as soon as possible, I hate to keep people waiting and I hate when I comment on someone else's channel and they either don't reply or it takes months for them to reply. I am nothing without you guys, so I always want to make sure I can support and just chat with you guys. Thank you as well for that compliment, I do appreciate it and I push hard every day to get bigger and bigger (not in fat, but that seems to happen to for some reason haha) reaching out to vendors all the time but its my fans that make it happen. The more fans I have, the more communication, and the more help I can provide, these vendors see it and they reach out, it's all a circle. thanks again my friend.
It's fans like you that make what I do worth it. The haters make it rough, really rough but when I see people like you come around and comment kind words, it makes it all better. Even if you had harsh words, I try to never reply with harshness, always with kindness and that many times comes back and earns subs and fans, it really is a great thing.
Thank you! By the way, I am having trouble with audio after installing the graphic card. Do you know by any chance what's causing the issue? Or does the gpu doesn't support audio? I don't know what's going on.
You are very welcome my friend, very happy I could help. Yes, the audio does work with the gpu, but you have to select it. So in windows 10, if single left click on the right hand side of the task bar, where the time is, on the speaker, click on the up arrow that will open un a list of sound devices, find your gpu there and click on it, see if the sound comes out of there.
@@ThisBytesForYou I tried almost every way of changing default audio but no good at all. All the audio jacks are working when I plug a speaker device... my monitor has built-in audio speakers and these are the ones not working with the gpu, in other words it's not detected.
@@davidjohnjosol2711 maybe you are having issues with your video drivers, I recommend checking out this video, and following the instructions (where it says NVIDIA, use AMD instead) and then downloading the latest AMD Video drivers from here maybe and let me know how it goes: www.amd.com/en/support/graphics/radeon-500-series/radeon-rx-500-series/radeon-rx-590. Your monitor has build in speakers but are you using DVI or HDMI/DP what version cable are you using and what monitor do you have?
@@ThisBytesForYou I appreciate your help! Very kind of you. Well I have the ASUS VC239(H) Monitor with HDMI. Will definitely check out the links sir thanks a lot!
Update: still no good, I've done this process again again after I plugged in the graphics card. Everything is fine except the audio via HDMI
@@davidjohnjosol2711 OK, going through the manual, I find this, let me know if this helps:
.• Make sure the audio cable is properly connected to the monitor
.• Adjust the volume settings of both your monitor and computer (So there is volume control on both the monitor and in Windows)
.• Make sure the computer sound card driver is properly installed and activated
.• Make sure the audio source is correct on the OSD. (The Audio source, it does not really go into detail what they mean here, but it is another thing to look out for)
dlcdnets.asus.com/pub/ASUS/LCD%20Monitors/VC239/ASUS_VC239_English.pdf
Also, on page 1 of this document, look at Diagram 2, B and C: dlcdnets.asus.com/pub/ASUS/LCD%20Monitors/VC239/F41G78S168011B_VC239_VC239H-W_QSG_EN_150514.pdf
And you are very welcome my friend, I love helping. Please let me know how it goes for you.
Hi! Should I delete the drivers of the built in GPU (AMD Ryzen 5 3400G w/ Radeon RX Vega 11 Graphics) or the newly installed graphics card (ASRock Phantom Gaming Radeon RX580 8GB OC) will simply override the built in GPU, and I should only install RX 580 drivers without wiping off Vega 11 drivers? Thanks for your help!
Maybe this will help ua-cam.com/users/shortsqbKrePI6rvM?feature=share
I conmected the 8pin(6+2) but i did not the 6 pin but its working fine. Should I connect 6 oin aswell or it can work without that aswel
Yes, connect the additional 6Pin, because it will help and it will not hurt you in anyway.
Wich is the minimum power supply I'll need? I'm looking forward to upgrade to the RX 590 Oh and at 12:34 I got a little confused for example now I have a GTX 1050 ti so instead of AMD I should select Nvidia right? And will I get the 2 free games promotion for buying a RX 580 or + right? Nice vid mate!!!
hello my friend, sorry it took me so long to reply, I usually reply within minutes but it looks like I missed this one. The suggested power supply is 500Watts, and you need to make sure you have both PCI-e connections to plug into the card, the 6 pin and the 8pin. As for your card, if the card you have in the machine now, that you are removing to install this card, you have to select NVIDIA to remove the older NVIDIA drivers you had installed. I don't see that they are giving away the games anymore though sadly. Thank you so much for the compliment, I do appreciate it, I hope I helped you in this reply.
@@ThisBytesForYou Of course you did thanks bud!
@@yuquezada9969 thank you my friend and you are very welcome ;)
Hi, i have two questions.
1) Is it still good for 2020 ?
2) Do you need to have both 6&8 pin connected for it to work or you can connect one and it will work slower but work ?
Hello my friend, yes it still is a good card and the instructions are good, but there are much better cards obviously, this would be good for 1080P gaming.
As for the cables, yes, you always need to connect all the PCIE connections they hard PCIE connections for. It may work without it, but there will be a point that you have issues, a game may crash, your system might reboot while gaming when the card requires more power than you have given it. Not that it will work slower without it, just that you will have issues.
@@ThisBytesForYou Alright thank you :D
Anytime my friend
I just finished my PC build and while everything works great I’m curious, should I run two individual cables for the 6 & 8 pin connectors or using a single cable with two connectors 6+2 & 8 work fine? I have a EVGa 750w G3.
if the power supply provides a single cable that splits into 2, it can handle it, so you should be good. I am running the 1000W G3, and I love it. Let me know how everything turns out when you are done, very curious and of course, if you are running into any issues, let me know I will try my hardest to help.
Awesome Thank you!!! Everything works great no issues thankfully. I just noticed in some videos multiple cables vs one.
you are very welcome my friend, happy I could help.
Hello man! So the cables you connecting are from PSU? Right? mine has only 4 Pin can i use 4 to 6 pin for Rx 580?
no no no, the 4Pin is for CPU, you could end up blowing your card if you force that cable in, it shouldn't fit but I have seen people push it in, don't.' What is the manufacturer and model number of your power supply?
@@ThisBytesForYou I already have connectec motherboard 4 pin but there sre horizontal 4 pin with connectors i it i already used one on my secont hdd as sata connector
Ok, but we are talking on a video about the graphics card, not anything else, 4pin cables don't connect to the graphics card.
Thanks.
you are so very welcome my friend, happy I could help. Now that you've got the card installed, how is she running for you?
Owesome job right there
thank you so much my friend, I do greatly appreciate your kind words. Do you already have this card?
I've been looking for ths card, but it still so hard to find
I also learned how to replace an old graphics card and this video is the answer
Thank you so much
@@akmalahmad1349 ahhh that is great news to hear my friend, I am so very happy I could help. Have you considered then potentially going with a 1070, 1080 or a 2060, 2070, might those be easier to find, those will perform just about this card? Not trying to push you away from AMD/Sapphire at all, but these might be better solutions for you and maybe cheaper too
I've been think about those cards but my pc theme were blue
So the shappie is totally the only options left
@@akmalahmad1349 haha, well thankfully since most of those card are RGB, you can light them blue another option I see many do is spray paint, but I am personally not a fan of it
For the Sapphire nitro rx 580, do you need to have AMD because I have an Intel processor. Also, is the drive installation process the same
No not at all, it will work fine of you have an Intel or an amd processor and yes, the driver install process would be the same.
Спасибо!)
Think you!)
You are so very welcome my friend, very happy I could help you. пожалуйста, мой друг, я очень рад, что смог помочь тебе.
Hello there, I just bought a rx580 and I was about to install it today but I noticed my PSU has only one 8(6+2) connector. It's 500w and on the box of the rx580 it says it's enough so is it ok to just attach a Y splitter 8pin to two 8(6+2) pin?
yes, 500 watts is the recommendation for the card, but rather than split the 8Pin, which may consume too much power, why don't you get something like this, so you can use your molex connections: geni.us/sVDjbp. I would recommend you plug one of the 2 molex connections (one adapter brings 2 molex adapters) into one strand of molex cables on your power supply and the other molex connection on another strand, to make sure the power is distributed evenly, then plug that into the video card.
Hello i just have a question i just build my pc and run same card as you but my fans are not spinning then i mean the fans on the card are thoose only supposted to spin when need.?
Yes, they spin up when they are needed, to keep them quiet.
Hello, I know this is an older video but I purchased an RX580 used recently, to my surprise after plugging everything in and turning on it immediately started to work and i downloaded the newest AMD driver for it and installed on my system. I was gaming for a couple days on it going easy with graphic settings playing APEX. Everything seemed fine until I adjusted the graphics in-game up just a bit to see how it handled and mid game the entire PC went black dead no lights from tower except ONE flicker of led when I completely purge power and attempt to turn on. I thought it may have been power issue since temps were not at a crazy high level (around 71 C) so I replaced with new EVGA 650 BQ psu. Hit the button and got nothing still. so I Removed rx580 and put back my nividia and it powered up, but no video from GPU PCI slots in BIOS all say empty. I removed the NIVIDIA and reinstalled the RX580 and this time it the system did power up, but bios still doesn't detect any GPU. After watching your video to try to figure this out i realize I only plugged in the 8 pin PCIe power cable and not the both the 6 pin and 8 pin but it was working for days. My question is could this have damaged the RX580 GPU altogether or my PCI port since the NIVIDIA isn't detected either the computer still works perfectly using the internal Intel VGA port. This is long i know but I just dont know which step to trouble shoot now. thanks for your time.
No, I doubt it would have damaged anything doing this, it just would not have provided enough power and not work correctly. I would think maybe it got zapped by esd if maybe you were on a carpet moving around a lot or maybe the card was already dying. Another thing is maybe you did not push it in enough into the pcie slot? And no worries my friend, so very happy I could help.
@@ThisBytesForYou Happy New Year! So I'm guessing since bios say nothing is in the PCIe slots with the rx580 or the gtx 1050 that the damage has happened to my MOBO PCIe slot? My gtx 1050 was perfectly fine before I made the swap.
@@jmmaverick3355 man that is horrible, it does sound that way though. How are you seeing it in the bios that it is not there, are you using onboard video?
@@jmmaverick3355 and a very happy new year to you as well
@@jmmaverick3355 the only thing I am thinking (and I commented this to someone else thinking I commented it to you last night) was maybe in moving things maybe walking across the carpet or something was you could have caused ESD, electro static discharge that could have zapped your motherboard. Without know exactly what you did, it is hard to say, can you verify all the power cables are securly plugged into the board, cpu power, 24Pin power, power to the CPU, so strange, wish you lived near by
Hi , sir . So i have an rx 580 8g sapphire edition , and im wondering if im supposed to place both 8 and 6 pins, or 8 pins alone ?? because i only used the 8 pins , but i faced a problem which is the pc reboots whenever i start a game . Do u think that this is the problem and i have to use both 8 and 6 pins together to fix my it??
If you see 2 or 3 or 4 on a card, they always need to be connected. As for the crashing, that could be it, not receiving enough power, make sure to get the VERY latest driver, it fixes a bunch of issues.
You can use the power cord from the old card as long as it’s 8 pin and 6pin?
Yup
@@ThisBytesForYou thank you!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Hi man! help me out.
I have this nitro+ rx 580 8gb with 8-pin + 6-pin and one cable with two heads (6+2pin // 6+2pin) "leaving" de PSU, could i use that one? or need to be another cable from PSU ?
yes you can, as long as your power supply has them, you can use them. Personally, I like to do 2 separate strands though.
@@ThisBytesForYou That helps me a lot man...thx!!!
@@urokai you are very welcome my friend, very happy I could help.
Would you recommend this card for the the coming years to play at maybe 1080p high and also I wanna play games like cyberpunk2077 call of duty Black ops 4 and rage 2
yes, it is a great card and it should be able to play Cyberpunk 2077 at 1080p, but you can find the requirements here, Black Ops 4 and Rage 2 you should also be great with the Sapphire nitro+ RX 590, you can check it out on Amazon: geni.us/CWSOO8N. As for tomorrow, I cannot say, as games require more, they are forced to make better video cards and vice versa, there is no such thing as future proof I am sorry to say. You can check out the system requirements for Cyberpunk here: www.game-debate.com/games/index.php?g_id=4614&game=Cyberpunk%202077. Let me know what you decide to do.
I think I might still get the Rx 590 I'm fine with turning some graphics settings to medium
@@MaybelineMomma OK great, and actually even with the highest end care, many times there is no need to go to the highest settings, Medium or High is great as it is, I like the way you think and I agree with you. Let me know if you end up getting the card, and if you use that link, it would help me tons as well. Thank you so much for stopping by and checking out this video and even more for commenting, it means the world to me.
Hi. i have radeon rx 580 8gb.. i haven't installed it yet.. i was wondering, should i plug 6pin and 8pin like what you did or just the 6pin \ 8pin? im really confuse which pins should i plug.
yes, always plug in all the connections provided on the card.
hey do i really need to plug in both the 6 pin and the 8 pin connector? my psu which is a coolermaster 600w has only one 6 pin and i have an adaptor to 8 pin so will i have a problem if i only plug the 8 pin?
yes, you will need to plug it in. it may work without it, but once the power thershold is met where it requires the 2nd connection, it will bluescreen or worse. what is your power supply manufacturer and model number?
ty bro i figured it out i just borrowed a molex-to-6 pin connector and its all fine now! nice video btw and i wish best of luck
@@soukos39 awesome, thank you so much for letting me know you got it working. Thank you so much for your kind words, I truly appreciate it and I also wish the best for you and yours.
Why did u choose AMD gpu on ddu to clean the drivers? I'm upgrading from 1050 ti to AMD and this is confusing me so when I come to this point I should choose Nvidia drivers to be cleaned right?
I might have chosen it in correct, but if you had an AMD before, and you are installing NVIDIA now, you want to uninstall AMD Drivers, you want to uninstall the previous drivers but it would not hurt if you did all 3, Intel, AMD and NVIDIA. So in your case, since you had a 1050TI, you would uninstall NVIDIA, but again, all 3 would be good too. So what card did you end up getting?
@@ThisBytesForYou I ordered RX 580 8GB+ the black nitro :D for 186 USD, and with my I5 8400 I should have no bottleneck
@@baileyldn8174 that's a great price, I hope you are loving it. Looks like you might be having a great time with that build.
Im using the rx580 oc gpu and I only had 1 6+2pin it works fine but i feel like it has more to give. Should i get another 6 pin to connect to the card aswell? And will this increase performance?
very odd that it worked with only one connector, usually it will not requiring both, but being the OC card it may work with one, but the additional one is required for the OC part. I don't know if you would experience a performance increase, but I would definitely do it, already plug in all connectors available, never think of them as optional, they are required.
What about Vega 8? do i have to do what you did or do i just uninstall drivers and add a new one? u said to restart and download ddu if i have a previous graphics card but i don't have that just the integrated graphics that comes with ryzen 3200g
Yes
@@ThisBytesForYou do what you did or uninstall drivers and add a new one?
It sounds like you have older hardware, normally I would always recommend to DDU the system, but with the current issues with the AMD drivers and windows, I would say go ahead and update from within the software.
Gracias 😁👌
de nada mi amigo, estoy muy feliz que te haya gustado el video
Tank U!
you are so very welcome my friend, I am very happy I could help. Thank you so much for stopping by and commenting, it means the world to me.
hey man, i have a really stupid question, the hdmi cable from the monitor need to be connected to the hdmi port of the graphics card and not the motherboard right?
Not a stupid question at all. You would not believe how many people do this and get upset because it doesn't work and don't ask about it. So it may work if you plan on using both onboard graphics and another gpu together but if you want to use the power of the add-on card you will want to plug the monitor into the graphics card, not the motherboard. Thank you so much for stopping by and checking out my video and even more for commenting, it means the world to me.
@@ThisBytesForYou ok thanks, the rx 590 has two hdmi ports right? which one should I use?
@@ProgTheater it does not really matter you could use which ever
I have a Ryzen 2400G, "APU", Can I uninstall the vega drivers, and have my apu run like a normal cpu with no problems at all? Or should I leave bother GPU drivers installed? Much appreciated your help, After using IGPU im looking to buy this dedicated one. ( Once having this card I wont be using the motherboard video ports. )
I recommend using DDU to remove the AMD drivers, downloading the latest chipset drivers for your board and the latest AMD gpu drivers, then installing the Chipset drivers first, rebooting and installing the latest video card drivers. Make sure you also disable the onboard video as well in the BIOS. If you do end up getting this card, please use this link, it would help me out tons, its on Amazon: geni.us/CWSOO8N. Thank you my friend, and I hope you liked this video, please let me know if I can help you out anymore with any other questions.
@@ThisBytesForYou wow, thank you!
@@andresrojano9590 anytime my friend. I hope I have helped you and if you need anything else, please do let me know.
Could you please make avideo how to eat properly with knife and fork? It would be so interesting....
no I couldn't, I usually just swallow my food, I don't chew.
i have Trendy SRM PSU 650watts and has only 1 - 6+2 PCIE Connectors. what should i do?
you might want to look a little closer, I am seeing that power supply has 2 x 6+2 connections. If anything maybe this would work for you: geni.us/oTB2G2
hello I hope you can help me, install the video card, but sometimes the audio is heard with interference. as if it were an old television, help.
Try using DDU to uninstall your older drivers, if you had NVIDIA in iyour machine previously, use the same method to remove the nvidia drivers as well, you can follow my guide in the link below. Then, download and update to the latest drivers and let me know if that helps.
ua-cam.com/video/clLYbBywhAg/v-deo.html
Hi, so I have a corsair tx550m psu, and I currently don't have the extra cables it comes with cause I previously had a nvidia quadro fx 570 gpu which didnt need power connectors and now I have a rx 590 fatboy core edition (quite the upgrade I know) and need power connectors any idea where I could get them or should I get a new psu? Any help would be extremely appreciated.
Nice, that is a great upgrade, a Quadro card is nice, but its made for workstation tasks, while a Geforce or Radeon are made for gaming, its majorly a driver thing (any driver can be made to work on different hardware) but its a nice difference in generations. A 550Watt, is kind of low and many video cards are now requiring 600 or 650Watts, a cable kit alone for your power supply is about $100, so I would recommend a new power supply, fully modular as well, like this one, a 750Watt on my Amazon affiliate store: geni.us/yVQTaSB, I have the 1000Watt version, but as a reviewer, I need to make sure I am ready for anything that comes my way. Also, I recommend keeping the box and keeping the additional cables you may not use in that box, you never know when you will need them. I hope this helps you my friend.
@@ThisBytesForYou Thanks for replying its actually impressive the amount of support you give. I'll check out the link and see how it goes from there. Thanks!
@@silentiumdingo Thank you my friend, I love help people and it is so very kind of you to take a moment out of your day to thank me, it means a ton to me. Please let me know if you have any further questions, I would love to help you get everything up and working.
@@ThisBytesForYou that power supply is pretty good and delivery is quick I'll probably get that one for sure. Thanks again.
@@silentiumdingo you are so very welcome my friend, very happy you liked it and I am sure it will solve all your problems today and for the foreseeable future
I have a question my friend bought a new rx 580 8gb and he got a PCI-E Dual 6pin Female to 8 pin Male Video Card Power Adapter and i bought the same card but it was used and i didint get it... do i need the adapter or i can plug it straight in to the psu
So the card comes with no adapters. Not sure how he got any. If you are plugging it into the power supply, you are good, no worries
@@ThisBytesForYou thank you for the answer. He bought xfx RX 580 8gb
@@TheFighterMinecraft cool, very happy I could help you my friend. Hope you love your card
Sapphire 😍
yeah they are amazing, what you have from them?
@@ThisBytesForYou my first card of them was a radeon hd4850 vapor-x and i still have in its original box.The temp never go up more 50 degrees
Here ,i have an Sapphire r9 380 nitro + and it work really great for the usage i have and always have good temps in full load never go up more than 70 degrees
I love their cooler system,their design and their robustness and sure the performance/quality/price
I hope they continue for long time in this way
@@lebolyon6952 very nice, I have installed thousands of them, every card almost haha when I worked at an OEM and a Boutique, they make great cards. I also keep my old cards and boxes haha. Yeah, I think they make the best heatsinks out of any manufacturer. I talk them them every week or so. They rock. How are you liking the 380?
The fan of my rx580 8gb sapphire is not working is that normal? Or it works until the system have enough heat?
download TRIXX 8.0 and use the fan check health thing, now another potential issue that there is a fix for, what motherboard do you have and who makes it?
the heatsink is touching the pci cables. will it not melt or cause problems??
As long as the cable is not frayed you are fine. As for melting, if the heatsink melts the cable, you have a ton of other issues. As long as you don't have the cable stopping the fan or frayed, you are fine.
@@ThisBytesForYou hi i have the sharkoon 550w gold kinda plastic cables, thats why im worried a little
So let me correct and expand on what I said. So generally it is ok, especially for my case since I am always in my case, since I review components. But in your case, you might build it, and never look into it, then it probably a good idea to not have the cables touch regardless of power supply type.
I need help a pci in it lights up i dont know how to activate it it still says im using vega 11 apu
are you plugged into the motherboard for video or on the video card?
Does gtx 1660s and 1660ti requires both 6 and 8 pin or just one 8 pin?
with any video card you purchase, if it has 2, they both need to be plugged in, if it has 3, all 3 need to be plugged in, all of them need to be plugged in.
Friend, want to ask you something i wanted to buy this card this or 580 sapphire nitro thats kinda same, but i heard that they are noisy and temperatures are pretty high, did you encountered some problems with this card and should i pair this card with r5 2600 or gtx 1660s?
no issues with this card or the 590, I had one issue with the newer driver, but I resolved that and created a video on it as well. I would probably go for the 1660, above the 580 though.
@True Roman ye, ill probably go with it, or Maybe even used 1070ti or 2060
1070 or a 2060 would do much better for you than a 1660. Please come back and let us know what you go for.
@@ThisBytesForYou I heard that people would go for 1660ti rather 1070ti, cause its newer tech, i cant really decide, but used 1070ti Is much cheaper than used 1660ti Price tag Is around 200$.
@@voste2093 yes, it is newer tech, the 1660 and a TINY bit slower than the 1070, so just see which one you can get, a 2060 would be so much better to get though if you could.
Is the RX 590 8GB Sapphire nitro compatible with HP prodesk 400 G1 MT?
I'm planning on upgrading my office computer into an intermediate gaming desktop
you going to have to measure inside of your case, to see the clearance. The card is 260mm in length, 135mm in width and 43in thickness, it requires a 500Watt power supply and 2 PCIE connections, and 8Pin and a 6Pin, you need both.
Thanks for the info, just what I needed :D @@ThisBytesForYou
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou by the way, can I ask another question? Like is Asus prime B450M-A compatible with HP prodesk 400 G1 MT? If not, can you recommend some compatible motherboards?
hi, im building a computer for my niece, and i have a question, the cables you connect to the video card are from the power suply?, mine dosnt have cables and i have to buy one i guess
I would be more than happy to help you my friend. Could you please let me know who makes your power supply and the model one? Also, please let me know what motherboard (make and model) and what CPU you have. This way just in case, if the power supply you mention is not good enough, I can get you the right one, I am always happy to help you my friend.
@@ThisBytesForYou good morning. The powe suply is a corsair 750m, processor i7 6700k @4.00ghz and the mother board is an asus b150m-a/m.2. Thank you for your time and response
@@keikakudoori good morning my friend, looking into the specs, I see that the power supply brings
6 x 6+2-Pin PCIe cables, so if you still have the box, they might be inside,if you lost them, then you could probably order new ones from corsair, just email their support site: help.corsair.com/hc/en-us/requests/new. its a good power supply, but its not cheap: geni.us/LKZy. And you are very welcome, thank you so much for checking out my video and even more for commenting ,it means the world to me.
@@ThisBytesForYou no problem. but i cant get the cable from the suport in my country. my last question is if i can buy the cable in amazon. there is one that have an 8 pin male that goes into the psu, and then the cable have 2 ends of 8 pins (6+2). i can use this cable or i have to buy 2 cables (6+2 pin)?
@@keikakudoori problem is its hard to know exactly what cable to get, they are not all the same, each manufacturer makes different cables, for different power supplies, but maybe this would work for you, geni.us/TEM9J or you can contact corsair and find out what package will work for you, they will give you a cp number
Does this graphic card works on gigabyte A320M-H motherboard and ryzen 3 3200G processor.
Yes it sure should, just make sure your BIOS is up to date and also, what model number and power supply manufacturer do you have?
Hello ThisBytesForYou can you please help me, i recently bought this card and I have a question, for this card should I use two separate cables (1x8 pin and 1x 6 pin) or one cable using the two heads ( 1 cable using the 8 pin and 6 pin header) Sorry my native language is not english. Thanks
You are typing it perfectly well, but I also do speak Spanish, so if you need my help in Spanish, I can help. I prefer using 2 separate cables, but sometimes I do use 1 single cable that has a 6 and a 6+2 header, it also depends on your power supply. Would you happen to know who makes your power supply and the model number so I can help you out?
@@ThisBytesForYou Thank for your response, I bought a corsair RM 650w 80+ GOLD FULL Modular to pair with the rx 590, its a build for my son. My personal PC that has a vega 56, and they do recommend to use two separate cables, because of the power draw. So I decided to ask you if I should use the same process in this card. Thanks for the help
@@Shinratotil yeah you will be fine, that is a great power supply, and has some room to spare if/when you want to upgrade the card later. Again, I recommend using 2, just for peace of mind, but it is a lot easier just using one, and it will work just fine for you. Very happy I could help my friend, my pleasure.
@@ThisBytesForYou thanks, I put a mind at ease. Thanks a lot. You gained a fan. Keep the good work
@@Shinratotil thank you so much my friend, I truly appreciate your kind words, always working hard to help people and I am so happy i could help you. Thanks as well for the sub, it means a ton to me.
Hello i would like to ask can i install this video card in old Motherboard X58 which is using processor Intel I7 920 first generation i currently use radeon HD 5870 2GB
Chances are yes, but what specific motherboard is it?
@@ThisBytesForYou i dont remember exact specification but have PCI Express x16 slots
Just got confirmation from sapphire that it will work, the card does not require uefi which the x58 chipset does not have, that was my worry but you are good my friend
@@ThisBytesForYou so i am happy to hear it will work and i go to buy one thank you for your help 😊
@@raminshakeri1485 you are very welcome my friend, you might want to check here on my Global Amazon affiliate link if you have not bought one yet: geni.us/CWSOO8N, let me know how it goes for you.
Good morning! Could you help with a couple questions? What form factor is that mother board? Is it a Micro ATX? Or ATX? I mean, will it fit on any Micro ATX board? Is liquid cooling a must if you intend to install this one? My case came with 3 fans, so would I need extra cooling for the processor? Thanks for sharing this video!
Good morning my friend, I would be more than happy to help you. The EVGA Z370 FTW I am using in this case is an ATX motherboard. The motherboard will only fit into an AXT chassis or even an E-ATX chassis. Now the Fractal Design Define R6 case I am using in this video will supports the Micro ATX / ATX / Mini ITX / E-ATX standard motherboards. As for cooling, no, liquid or air cooling air preferences. If you want to overclock a lot, I would recommend liquid cooling, but if yuou want to keep normal speeds on your CPU (Stock) air is fine, or even overclock slightly, an air cooled fan would work. I will link up below everything I used in this video for your reference. Let me know if you need any more help, as always it would be my pleasure.
Fractal Design DEFINE R6 Blackout TG Case: geni.us/a0dMjB
EVGA Z370 FTW Motherboard: geni.us/X9eVgAq
ARCTIC Freezer 33 eSports Heatsink: geni.us/ciPnLI
Intel Core i7 8700K Processor: geni.us/jD0s8D
Patriot Viper 32Gig 2800MHz DDR4 PVE432G280C6KGY: geni.us/wPWP1EO
EVGA GeForce RTX 2080 XC ULTRA: geni.us/SwBEU6
Sapphire Radeon Nitro+ RX 590: geni.us/CWSOO8N
Thermal Grizzly Kryonaut Thermal Paste: geni.us/xBKj
Kingston A1000 PCIe NVMe M.2 SSD : geni.us/BhJAQM
Samsung 850 Evo 500GB: geni.us/QTA2
Patriot Ignite 480GB SSD: geni.us/CdEvu
WD Blue 500GB SSD: geni.us/VdqB7
Kingston 240GB SSDNOW UV500: geni.us/mvwOPN
Cooler Master Silent Pro Gold 1200W PSU: geni.us/7hdBk
@@ThisBytesForYou Thank you so much for your thorough answer!
@@mermeflorez you are so very welcome my friend, I am happy I could help you and please let me know if you need anything else.
Hello, I have a question, I have a MSI GTX 1050ti, Im planing on buying this card, does my 1050ti have the correct PCie cables, so that i can use the current cables when i buy this card?
can you give me the exact model number and manufacturer of your card?
@@ThisBytesForYou its manufactured by MSI, and the model number is 10DE 1C82 35101462
@@franklittle5945 It looks like that card has a x6 connection, you will also need a x8 connection. What is the manufacturer and model number of your power supply?
@@ThisBytesForYou its some Lenovo PSU, 450W. S/N: 8SSP50A36160A1DB78W10WS
Hmmm, I wouldn't know where to go with that, retail machines usually have lower end power supplies. Can you tell if it is a regular sized power supply or is it smaller?
Hi! I just subscribed because I am about to buy a new graphics card. It either a Sapphire Radeon Nitro+ RX 590 8GB, Asus ROG STRIX RX VEGA 56 8GB, RADEON RX VEGA 56 AIR BOOST OC 8GB or a Sapphire RADEON RX VEGA 56 PULSE 8GB. What is the best value for money and performance out of these? Thanks!
wow, thank you so much my friend for stopping by and commenting, it means the world to me. OK, so between the 4, first I will say don't even both looking at the MSI, not becuase there is anything wrong with MSI, they are a great company and make great products, but the single fan and blower style card will make much more noise and get hotter than the other cards with multiple fans, the speeds are lower on the card to compensate for the lack of cooling.
Now on to the real comparison. While this is a video on the 590, it is a great card but it falls flat in comparison to the VEGA56, so lets put that one away.
So the comparison now is between the VEGA56's, the real ones. The pulse is a great line, its Sapphires no frills no thrills card, not in performance but in looks and features, it performs well but does not have the extra bling the higher end NITRO cards. The Asus is about 300Mhz faster than the Pulse, but also $100 more expensive that the Pulse, but I think the performance justifies the card talking on the AMD side. That extra boost will keep you gaming just a bit longer over the pulse.
What kind of games do you play and what resolutions do you play at?
and for reference, here are the cards you were asking about on Amazon:
Sapphire 11276-02-40G Radeon Pulse RX Vega 56: geni.us/BAKy1
ASUS ROG-STRIX-RXVEGA56-O8G-GAMING 8GB OC: geni.us/NROQb
@@ThisBytesForYou thanks for the reply! I use a iiyama G2530HSU-B1 24.5" G-Master HD monitor and play pretty much any big AAA title that has come out over the last 5 years, as well as some smaller less graphically demanding games. At the minute, I have a 1050 ti, which runs these games fine, but not at high setting for the more recent ones
You are very welcome my friend, I like to reply to everyone as fast as I can, I know there are trillions of other sites out there, so I want to make sure I can be one of the few that actually interacts haha. If you would not mind me making a recommendation, I am not favoring one of the other, AMD makes great GPU's as does NVIDIA, but if you are looking at this kind of money, for about $50 more, why not take a look a at the EVGA RTX 2070: geni.us/BCZspf
This card will not only take care of EVERYTHING you have now, but many things in the future and you will have the ability to utilize DLSS and ray tracing to make your games look beautiful, even more than you can today. The 1050TI does not have that ability nor does AMD products. Also, it will be able to even handle 4K resolutions, which the 1050TI can somewhat do and the VEGA products will not work so well at all.
Now your current monitor does not support 4K, but think about it this way, if this card can support 4K, it will blow 1080P out of the water, and not just for today, it will work for a VERY long time and again, be able to work with a ton of newer features as the DLSS' AI learns more and more, your card will get that benefit.
The ONLY down fall, maybe 2, is that the card is a bit long 10.62 inches and requires a 550WAtt and a 8Pin and 6Pin PCIE connection. If you have at least a 550watt but maybe only a 6pin or only an 8Pin, there are adapters you can purchase for less than $5 to make it work for you.
Another big thing, now that NVIDIA cards support FReesync, you will be able to utilize your high refreshrate and Freesync on this card, you will NOT be disappointed.
Let me know what you decide.
Also, if you do end up buy either card, please do use the links I provided, I will help me tons. Thank you my friend and the best of luck to you.
@@ThisBytesForYou thanks a lot! Will keep searching around before making a final decision, will come back to this video to see how to insert a graphics card too!
thats great my friend, thank you so much and you are very welcome, very happy I could help and thank you for letting me know this video will help you, that's why I make these and I have plenty more you can check out even if you get another card. ;)
Not sure if you still respond to comments but, I have an RX 580 Sapphire Nitro+ but I've been running it by plugging in an 8-pin PCIe connector only, I haven't used the 6-pin, silly question, but does that greatly affect the performance of my card?
If UA-cam delivers the notification, I always respond my friend, from my very first video till my last, I always respond, will be making a video on that shortly as well. Yes, it can affect performance, you may not be getting the full performance of your card and even worse, you may be experiencing bluescreens, lowered performance and more. If your card has 1, 2, 3. 4 PCIE connectors, ALWAYS plug them in. I hope this helps you my friend.
@@ThisBytesForYou well you've definitely earned a new subscriber, I appreciate the response, I'm currently in the process of upgrading my PC and wanna make sure I'm getting the most out of it, I'll definitely take note of that.
Cheers
@@YakiOnigiriZoro Awesome my friend, I do greatly appreciate it. If you don't mind me asking, what are you upgrading, what manufacture and model power supply do you have along with the video card?
Cheers my friend.
@@ThisBytesForYou
CPU
Ryzen 7 3700X - £255 ✅
GPU
EVGA RTX 2070 Super FTW3 - ❌
MOTHERBOARD
Aorus X570 Master - £301.64 ✅
CPU COOLER
Corsair H100i RGB Platinum SE - £115 ✅
RAM
Corsair Vengeance RGB Pro 16GB 2x8GB 3200MHz - £76.10 ✅
STORAGE
HDD:
Seagate BarraCuda 2TB 7200RPM - £44.05 ✅
SSD:
Samsung 970 Evo Plus 1TB - £152.19 ✅
CASE
CORSAIR iCUE 456X RGB (WHITE) - £88 ✅
POWER SUPPLY
EVGA 750W GOLD - £78 ✅
MONITOR
LG 27GL80 - ❌
This is my list, gotta save up a little for my GPU, but I'm gonna be using my old one for the time being
@@YakiOnigiriZoro looks like a sweet build and I don't think you will need anything additional. Now you will want to wait a little on the GPU, since the 3xxx series is coming out next month but I think you will be good with cables. You may want to buy additional SATA cables for your driver to make them the color you want, but aside from that, I think you are gold.
This video card requires 6-pin and 8-pin but my power supply only has 6-pin do I need to buy a new one?
well maybe, what is the manufacturer and model number of your power supply?
Hi Bro love your vids
I have installed my new rx580 nitro +se All fans are running but no display but when I connect my internal gfx card it's working
My specs:
Intel core i7 3770k
16gb ram
1tb hdd
700w cooler master
one connector is on pci other is not is that a problem ?
Hello my friend, thank you so much for your kind words. Great system by the way, I would make 1 change but I will provide you with that information later if you like. With a 3770, what motherboard are you running this on, and what video card did you come from (what card did you have before)? Also, on your onboard Intel HD graphics, what kind of cable are you using (HDMI, DVI, VGA, DP) and what cable are you using to plug into your RX580 (HDMI, DVI, VGA or DP). The last question, about the cables, I ask that because of for example, when you switch interfaces, you have to make sure you select the correct input on the monitor. If for example you were on HDMI on your Intel, but when you switched to DP on the RX580, you would have to select on the buttons on the monitor itself to move from HDMI to DP, just an idea.
If that last piece did not help, please provide
1. Motherboard manufacturer and model number (exact model number please)
2. What video card you had prior to the RX580
ThisBytesForYou my motherboard is the gigabyte GA-B75M-D3H
Video card before was the amd sapphire hd 5800
I was using HDMI slot before with my old card and on the Intel on-board card too
ThisBytesForYou yes please the 1 change would like to know it as well
@@akumaoni1592 Alright great, thank you. I see what your problem is, the 5800 did not support UEFI, the 580 while it does not require it, works best with it enabled. So update to the latest BIOS for your motherboard F15 (www.gigabyte.com/us/Motherboard/GA-B75M-D3H-rev-10/support#support-dl-bios), after that, in your "BIOS features" section, under "PCI ROM Priority", make sure it is set to UEFI, save and exit, after that you should be fine. Once in windows, download the most up to date AMD graphics driver (dont install it just yet), then download DDU, then boot into safe mode and remove all the Intel and AMD drivers (you can watch my video on how to do that here: ua-cam.com/video/clLYbBywhAg/v-deo.html) and then when you are done there, make sure to disable the windows driver update within DDU, then reboot the machine and install your AMD driver and you should be good.
As for the recommendation, your system is a little older, but the 3770 is still a decent processor, so you should get a little life out of it, but you are being robbed of performance with that spinning disk. Updating to an SSD (like this one Samsung 850 Evo 500GB: geni.us/QTA2, that is my Amazon affiliate code, so it helps me if you use that) and installing your OS on that drive, keep the 1TB drive as a data drive, maybe even to install your games onto, but you will notice a night and day difference moving over your OS from a mechanical drive to an SSD. I do not recommend cloning your data over, nothing is better than a fresh OS install but if you still needed to clone it, I reviewed this device that makes the process soooooo easy, and is VERY cheap (ua-cam.com/video/ENS3RhjaS9M/v-deo.html) , but worry about the video card for now, you can work on the SSD and potentially cloning later.
Please let me know how this works out for you, I love helping and would love to help you get everything working on that new card. Thank you so much for stopping by, checking out my video and commenting, it means the world to me, and thank you for your kind words.
ThisBytesForYou I tried it but after 3hrs it's not letting me update the bios at all I think my motherboard locked the update :(
oh well np Bro Thank you very much for the help:D
I better buy new pc parts for i9 9900k which motherboard you recommend cz I am going for gaming, work and emulation?
Hello.
I bought a used rx590 nitro+ SE.
It will arrrive in 2-3 days.
I'm running a 80+ bronze semi modular 550w psu.
My problem is I have only one 8 pin PCIE connector for power ( I had another 6 pin connector but i can't find it now)
Now, can i run this GPU with one 8 pin connector or do i need both?
I was told by one of my tech friend that PCIE slot gives 75w of power from the board and i have the 8pin connector that gives 150w so I should be good to go?
Hello, no, you need both. The card "may" run with a single, I have heard reports of it, but chances are it will fail.
@@ThisBytesForYou Then I should go buy another connector before the GPU arrives. Thanks for the info ❤️
well yes, but I don't recommend splitting them, I recommend getting a power supply that has the connections, in 2 separate connectors, not daisy chained. What is the manufacturer and model number of your power supply?@@rafidraihan5543
@@ThisBytesForYou Antec Neo Eco 550w Semi Modular
I already have a 8pin connector that comes with the psu. I also had another 8 pin to 6+2 that i lost.
I recommend contacting Antec and purchasing another from them, here is where you contact them: antec.com/contact, the model number is NE550M V2 and you want to buy a 6+2 Pin PCIE power connector for that specific model.
hey i know this video is a bit old but I'm here to tell a problem I had on my rx580 nitro +. When I installed the drivers my card just shut down and then the screen started turning on and off. It runs fine without the driver but when I install it, it does that.
Try running DDU to remove all of your old drivers, and then reinstall your latest driver, you can see my video on how to do this, let me know on how it goes. Also, you never have to worry about how old a video is, I reply to all my comments: ua-cam.com/video/clLYbBywhAg/v-deo.html
can i proceed to booting my pc when I already installed the amd videocard using the old driver of my apu from AMD?
Not sure why people fight this so much, check out this video, I talk about why it's important, even though it's an nvidia cards: ua-cam.com/video/ouG8c-lBgV4/v-deo.html
@@ThisBytesForYou aight thanks man! +1 sub great videos!
@@nvmrenh7938 awesome my friend, thanks so much for your kind words and support, It means a ton to me and I am happy I could help.
Hey bro can you help me plz?
which power supply should I buy for i3-7100, rx590 8G
is 500w is enough?
thank you so much for stopping by, checking out my video and commenting, it means the world to me. SO this video card requires at least a 500Watt, so you are good, but you will also need an 8PIn PCIE connection as well as a 6Pin, you need both of those connected. If you are not sure if you have those, I can help, if you let me know the model number of maker of your power supply. I would be more than happy to help.
ThisBytesForYou is it possible to send you a photo of my power supply?
I don't know exactly what should i check
ThisBytesForYou golden tiger g&t atx-500wce-p4
this is the name?
sally, I cannot find good information on it, but I do see a pictre online, and it states that it is 450Watts real total output, but 500Watts Max, Max usually is only for a few seconds and then it shuts off. Here is an affordable 500WAtt, that has all the connections you need: geni.us/6wI9A, I hope that helps.
ThisBytesForYou Maybe should i buy with more watt, bcz that i have also a cpu etc?
what do you think?
I have AMD-A10 APU, should I uninstall the APU first before plugging in the card?
yes, download and use DDU in safe mode to uninstall the APU drivers then shut down the machine. install the GPU, then turn on the machine with the monitor cable connected to the GPU and enter the BIOS. Disable the APU in the BIOS, then save and exit and install the newer GPU drivers in the OS. There are times that the APU will need to be used when entering the BIOS as the auto detect may not be selected, but you will surely know if you are not getting video. Please let me know how this works out for you.
I have also a10 7860k and an RX 590. Im worrying about the bottleneck :(
@@lazylad6642 thats a decent processor actually, no reason to worry.
It's bottleneck imo, I have Ryzen 5 1600. Got 60fps on CSGO while 200+ on R5. CSGO/DOTA are cpu-intensive games though. But if you want to get the most out of your 590, consider upgrading your processor.
@@Kenjn_DJ any game is cpu intensive if the resolution is set low. You will get over 60fps if you have your vsync is on, turn vsync off. Its not a bottle neck for the video card, I promise. I recommend using DDU to uninstall all of the older drivers then installing the latest and greatest and make sure vsync is off and your onboard gpu is disabled