I’ve thought about this post install and that’s a tough one. After personal experience with two sets, it does seem like there are varying figments between covers. Some are definitely tighter than others. Your best bet for getting the covers off is if you get a looser fitting cover but there’s no way to predict this. Another thing to consider is the covers snap into place so you really don’t need to use the double sided tape at all. If you did use the tape and the covers snapped into place, it’s going to be pretty hard to get them off without damaging some paint. Unfortunately, without knowing this stuff in advance, you likely won’t have very much options.
Polishing was def worth it man. I could see a big difference!
It’s definitely one of those things that really pay off for those who take the time.
BTW... Your car is super sick!
Thanks!
Does the door still have the lock and unlock function with the covers? Looks great!
The door sensor is on the inside of the handle, which the carbon covers do not go over.
So what process would you go through to remove the covers without destroying the paint on the door handles?
I’ve thought about this post install and that’s a tough one. After personal experience with two sets, it does seem like there are varying figments between covers. Some are definitely tighter than others. Your best bet for getting the covers off is if you get a looser fitting cover but there’s no way to predict this. Another thing to consider is the covers snap into place so you really don’t need to use the double sided tape at all. If you did use the tape and the covers snapped into place, it’s going to be pretty hard to get them off without damaging some paint. Unfortunately, without knowing this stuff in advance, you likely won’t have very much options.
Could put up link where you bought the covers please.
I got it from eBay so just look there. It's pretty much all the same stuff sold by different people.
Most impressive
Thank you!