POV Gloss Carbon Fiber Interior Wrap - How to wrap your interior Tesla Model 3

Поділитися
Вставка
  • Опубліковано 7 гру 2024

КОМЕНТАРІ • 803

  • @CKWraps
    @CKWraps  5 років тому +39

    For exclusive content in 4k video visit ckwraps.com and sign up as a premium member

    • @DeanF
      @DeanF 5 років тому +3

      Thanks for this! I have wrapped a few things, and always learning!

    • @Dorklord444
      @Dorklord444 4 роки тому

      Hey Christian, do you know of a an exterior vinyl wrap that looks the same or similar to this VViVID vinyl wrap?

    • @omeroguzman6935
      @omeroguzman6935 4 роки тому

      Ck wraps i was nervous doing my own wraps to my genesis but thanks to your videos i gain alot of confidence thanks bro amazing wraps you do.!

    • @adengbuhaybukidinAustralia
      @adengbuhaybukidinAustralia 3 роки тому

      I want to use gloss woodgrain pvc wrap on my gen 4 Mitsubishi Pajero console, is using a heat gun necessary or just plastic spreader?

    • @CRXUGLYKID
      @CRXUGLYKID 3 роки тому

      Just needs the fro!Great work

  • @15DurangoRT
    @15DurangoRT 4 роки тому +64

    This is what you can do when you have years of practice. The secret to wrapping is patience. This guy does phenomenal work!

    • @Chris_Wolfgram
      @Chris_Wolfgram 2 роки тому +4

      Yes he does ! Id pay just about anything he asked, to do my interior.... But 3000 miles is just a bit too far for me. Even in my Prius, that would $600 in gas....

  • @drdanbhcmg
    @drdanbhcmg 5 років тому +88

    I love it when a Craftsman make his work look easy!!!

  • @bridgendesar
    @bridgendesar 4 роки тому +138

    Awesome, when you've finiished the video, you should say "and that's a wrap!"

    • @c.amoroso
      @c.amoroso 4 роки тому +7

      That’s too corny

  • @LB20278
    @LB20278 3 місяці тому +1

    I started watching your videos because I wanted to know how to apply a small bit of wrap to a specific area. Now, I keep coming back to watch a master at work...and to listen to a great teacher.

  • @nikolesmith1307
    @nikolesmith1307 4 роки тому +6

    Been helping my husband's wrap the interior of our vehicles for the past 3+ yrs. They only reason & time we redo it, is when we want a change up the look. We are working teaching our daughter so she can do her own look in her vehicle in the next couple of years.
    **Chris, Doing amazing work as always, on doing your trait as well as teaching it, keep it up!

  • @benrobinson7676
    @benrobinson7676 5 років тому +672

    I think it’s safe to say you’re the Bob Ross of the wrapping world 😂

    • @omartellez1446
      @omartellez1446 5 років тому +3

      I was literally thinking the same

    • @YusufPetersenCPT
      @YusufPetersenCPT 5 років тому +21

      Look at all those happy cuts...

    • @rotrmotr
      @rotrmotr 4 роки тому +1

      Ben Robinson hey I was going to say the same thing! His voice is soothing. I would be nervous as hell doing what he is doing.

    • @colemartin8796
      @colemartin8796 4 роки тому

      I mean he wrapped a completely flat, very simple piece, lets be real

    • @GFXKraVe
      @GFXKraVe 4 роки тому

      Have you watched Yiannimize?

  • @silverback2773
    @silverback2773 Рік тому +8

    Man doing work for free is unheard of, you really seem to be a super cool guy. Know the vid is old but still super useful information. Just recently wrapped my hood, took like 4 hours but I really took my time to make sure it was done right and was my first time wrapping anything. You are fuckin awesome dude. Keep up all the good work.

  • @Staykool777
    @Staykool777 3 роки тому +9

    THIS DUDE IS AN ARTIST! Don't get it twisted.

  • @larzDJ
    @larzDJ 5 років тому +6

    That is by far the best carbon fiber wrap I have ever seen!

  • @Alternabear
    @Alternabear 2 роки тому +8

    Amazing. I am about to wrap console and dash trim panels in my Volvo XC90 and I was worried about the fussy panels that aren't removable. This showed me everything I need to know, step-by-step.

    • @cherri2665
      @cherri2665 Рік тому +1

      I’m about to do my Volvo s60😄

  • @selcouthmesonoxian3143
    @selcouthmesonoxian3143 4 роки тому +134

    "I'm really good with my fingers."
    Instantly went to comment section

  • @Pboy7272
    @Pboy7272 2 роки тому

    All of the piano black interior pieces of the world just made a collective GASP!!!

  • @DistractedKat
    @DistractedKat Рік тому +7

    This tutorial was fantastic! Unfortunately, it made me a little over confident in my ability because you made it look so easy…not perfect, but I know I did MUCH better at installing my vinyl all thanks to you. Seriously, great technique. Thanks for sharing!

  • @MichaelFarrell2
    @MichaelFarrell2 5 років тому +18

    Great video, you made it look so easy. Well it's definitely easier then the pre-cut and not having to line up the holes and edges. Good job. I will be ordering today.

  • @scottgillig908
    @scottgillig908 5 років тому +60

    The carbon fiber vinyl you're using makes that console look totally bad ass.

    • @e36fanatics
      @e36fanatics 4 роки тому +5

      i disagree heavily... it makes it look cheap to anyone who knows what real carbon pieces look like not to mention how overdone this whole carbon wraps have become its actually more unique not to have one

    • @drunken13astard
      @drunken13astard 4 роки тому +4

      @@e36fanatics If that piano black is heavily scratched, it may be an improvement. I agree tho, nothing beats the real thing.

    • @DrWarcloud36
      @DrWarcloud36 4 роки тому +3

      @@e36fanatics i tend to agree with you. I have an infiniti g37 and its like everyone and their mother wraps the interior in carbon vinyl.. i hate the brushed aluminium in my interior but i dont want the carbon wrap either. Think i may just drop a few hunded $ and go with the wood grain conversion

    • @Unknown-qs2wu
      @Unknown-qs2wu 3 роки тому

      @@e36fanatics chin up

  • @joea1746
    @joea1746 Рік тому +1

    You make it look easy. I did my W212 E400 center console and like you I did each lid separately. I used the same gloss fiber interior wrap but removed the side trim piece of the center console. This allowed me to have better access side of lid trim. My biggest issue was trying to get the side edges to stick.

  • @kanatanagesaeiji
    @kanatanagesaeiji 5 років тому +253

    You: I’m really good with my fingers
    Girls: 😳

    • @shubham-------
      @shubham------- 4 роки тому +1

      lol😂😂😂

    • @lovegenerator7617
      @lovegenerator7617 4 роки тому +3

      Im extremely good with my tongue and lips, girls and women

    • @ciair7
      @ciair7 4 роки тому +16

      @@lovegenerator7617 no one interessed 👌

    • @slushy0022
      @slushy0022 4 роки тому +8

      Kind of funny your commenting on a “lady” pov lmfaoooo and no other lady commented that 💀 💀

    • @ciair7
      @ciair7 4 роки тому +4

      @@slushy0022 this kind of people are always poor in this life 😉

  • @mikex1384
    @mikex1384 4 роки тому +3

    "This is the part that makes people nervous." You got that right! The thought of having to drag that blade straight along that edge would freak me out.

  • @consumerthis3169
    @consumerthis3169 5 років тому +66

    It’s intimidating, but the more you watch these videos the more I work up the nerve to do it; worse case I’m out $20 for some vinyl

  • @Jesko_VRS
    @Jesko_VRS 2 роки тому

    Quality vinyl, mad skills, patience of a monk = good results.

  • @texasslingleadsomtingwong8751
    @texasslingleadsomtingwong8751 2 роки тому

    Wow , that car should have came with the wrap you put in . It's so good that it looks factory perfect and blends correctly . I'm impressed.

  • @nomo4u886
    @nomo4u886 4 роки тому

    Damn this will make any car look so much more unique it’s dope af & stands out from the crowd.

  • @urgoodfriend7510
    @urgoodfriend7510 3 роки тому

    love the way he pays attention to details by aligning the carbon trails.

  • @JD-wm4uv
    @JD-wm4uv 3 роки тому

    I wonder how much practice this guy has has . You can tell he does this alot all the tools techniques everything is just makes it look easy and quick as he applied with steady hands

  • @patrickthompson1190
    @patrickthompson1190 5 років тому +202

    "I'm really good with my fingers" - CKWraps 2019

  • @douglasgarcia8577
    @douglasgarcia8577 4 роки тому

    Watching this video was like watching Bob Ross doing his paintings.... Very calming voice as you show us your amazing work!!! Great Job!!

  • @nullwii
    @nullwii 5 років тому +14

    This is exactly the video I needed this week

  • @offdabeatz
    @offdabeatz 4 місяці тому

    Quick tip. If you can remove the pieces applying the vinyl to I highly recommend. The faces of that area with proper tools take a bout 10 mins to remove and save a whole lot of worry about cutting vehicle or vinyl wrong.

  • @chinito20fam
    @chinito20fam Рік тому

    so aver doing my fromt grill and mirriors and now going for the big boy. which is wrapping a car. glad you still habe this up. going to redo the inside. makes things so simple. buy thanks again. great stuff.

  • @mattb12341
    @mattb12341 3 роки тому

    Man one of your biggest fans I can watch your videos all day. Great teacher to. Hopefully can be good like you one day.

  • @XboxNationCanada
    @XboxNationCanada 5 років тому +11

    Product looks amazing. Great job as usual. Looks so much better than the precut material that was on there before

  • @MrXispas
    @MrXispas 2 роки тому

    Great vid's. I was doing something like that in 1997 in my car.....101% of people said i was crazy, using an hair dryer for a heat gun......Now i know i was right...., never to late to start again!

  • @blackredzie
    @blackredzie 4 роки тому

    Thanx for the video. I learn to do better wrapping from all your videos. Nice interior wrapping without removing the console.

  • @davidhaddox6492
    @davidhaddox6492 Рік тому

    Literally learning this to make this f150 i bought a easy flip lol i appreciate your handy work and detailed tips and instructions

  • @michaeltlays1293
    @michaeltlays1293 Рік тому

    Watching these is kinda therapeutic ☺️

  • @roamizane1484
    @roamizane1484 3 роки тому

    Thumbs down for what? Nice job CK, you always move like a surgeon with the blade.

  • @RG-sk8cc
    @RG-sk8cc 3 роки тому +1

    why would anyone give you a thumbs down? great job and easy to follow along. can't wait to try my hand at this on 2020 dodge challenger scatpack

  • @kylephillips8780
    @kylephillips8780 5 років тому +13

    Wooooww the cup holder came out great 👍🏾.. I love the close up camera

  • @nightynine4061
    @nightynine4061 6 місяців тому

    I really like your videos. I am happy that this vinyl stuff is not destructive on your surface if you fail. It's not like glue and it's cheap too. I am going to start practicing on small surfaces on my car. I got an old Honda Civic I will not sell and will be driving it into the ground.

  • @jordancerace9310
    @jordancerace9310 3 роки тому

    Oddly satisfying watching this. Gonna do carbon fiber on my dash soon

  • @shanekemp4093
    @shanekemp4093 5 років тому +6

    This is the exact video I needed to see. I've been watching your videos for a couple of months now. I want to get into the wrapping business and I started my first project with my own interior in carbon and it was very difficult to use probably not the best first material to use or the fact it was labeled as 3m which it wasnt, and the material wasn't the best. But the second job I did was on my friends BMW 3 series and it came out wonderful. But I did find wrapping the corners difficult but now I see where I went wrong thanks bro love the videos and love the work, I hope to get on that level one day big ups 👍

  • @AlphaHarmonious
    @AlphaHarmonious 4 роки тому +5

    Wow. This gentleman was extremely professional and did one h^** of a job. -Harmonious

  • @djrichsaracino2554
    @djrichsaracino2554 4 роки тому +2

    Amazing work, to think COVID-19 lock down got me here :-) The power of endless youtube videos.

  • @th3suffering
    @th3suffering Рік тому

    As the owner of a Model 3 that did this wrap recently, a word of warning. The piano black is itself a wrap of sorts. Use caution when removing the wrap. I had just about completed the cupholder portion when i was a little too careless with the knife and had to start over. So i give the wrap (unheated) a good yank to start over because im a moron. It took the wrap off, right along with the piano black below it and i was left with the ABS. If i ever unwrap ill need to replace this piece from ebay now.

  • @rbmwiv
    @rbmwiv 4 роки тому

    I have been using a salon quality hair drier for doing vynal. It gets it hot enough to stretch and you will never over heat it. I happened to get one in a parts car I bought and I use it on stuff like that and if I gotta break out the heat gun then I do. Great work.

  • @americosupply
    @americosupply 2 місяці тому

    Thank you , I know this is an older post but it really helped me . Great job !!👍

  • @J-luna
    @J-luna 2 роки тому +1

    I envy very talented craftsmen. Very good job.

  • @MuscleTile
    @MuscleTile 4 роки тому +1

    This is as satisfying and relaxing as watching Bob Ross' painting videos.

  • @BaldEagle11100
    @BaldEagle11100 4 роки тому

    And thats the Mac Daddy of the wrapping world right there ! Come to the UK - please.

  • @andrewrandolph9559
    @andrewrandolph9559 Рік тому

    HE GOT THE HAND OF A SURGEON REAL TALK THATS THE PERSON U WANT TO HIRE REAL TAL;K

  • @MA-bq8yg
    @MA-bq8yg 2 роки тому

    WoW 🤩 so beautiful. It appears so easy when you do the covering.

  • @bsams3827
    @bsams3827 4 роки тому

    Snap on makes a really good light that hooks across the headliner for more light inside. Its even cordless/rechargeable. I use mine for more under hood apps but for you it would really light up those dark areas.

    • @bsams3827
      @bsams3827 4 роки тому

      heres a link if interested:shop.snapon.com/product/Flashlights/14.4-V-MicroLithium-90-LED-Cordless-Underhood-Light%2C-Red/CTLUH761

  • @KevinAClassA
    @KevinAClassA 3 роки тому

    WOW !!
    Perfection and steady hands at there finest..
    Great job brother
    Stay safe

  • @grantroberts4231
    @grantroberts4231 4 роки тому

    would have enjoyed more of a reveal shot of the whole project after it was finished. the 2 seconds at the end left me wanting more.

  • @MrLeroyJacob
    @MrLeroyJacob 4 роки тому

    shout out to your freehand skills!!! and yes you are Bob Ross!!!

  • @vidi3872
    @vidi3872 2 роки тому

    Laid this wrap down on the scoop of my WRX (2 WRX so far), and its holding up fine, 1 year so far. Had no idea its interior only. The adhesive on this wrap was super strong, made it tough to manage

    • @latenight30i
      @latenight30i 2 роки тому

      what’s the wrap called? where can i find it

  • @bfunkydunk
    @bfunkydunk 4 роки тому +2

    You give me the confidence to wrap my own car and interior!

  • @Wightzebra
    @Wightzebra 3 роки тому

    I binge watch your videos like I watch a series like Sons of Anarchy.

  • @rasheedmuhammed1073
    @rasheedmuhammed1073 4 роки тому

    I have tried this in my car, and removed it after 3 months. Reason, i usually park my vehicle in 🌞 and when interior gets heated and some dust gets in the edges these sticker films edges gets out of the body where its applied and will looks very bad.
    Then after a lot of consulation from auto experts i tried hydrographics in my dashboard and now its comparable to ferrari interior.
    Go for carbon fibre design in hydrographics water dipping. All those approved providers are offering life time guarantee. It will cost as like this square inch /$ .
    Hope this may help you car lovers.
    Any way the wrapping seen this video is of extreme quality. Great job♥️

  • @juannavarrete3990
    @juannavarrete3990 4 роки тому +2

    You should do radio. The Bob Ross of wrapping. Thanks for the great content 💯

  • @williamsokoloskiwilliamsok9544
    @williamsokoloskiwilliamsok9544 2 роки тому

    Thanks!

  • @lonimarie6587
    @lonimarie6587 3 роки тому +2

    It's always a plus when you're good with your fingers 🤩🙈🙉🙊😻

  • @ricoshay1172
    @ricoshay1172 3 роки тому

    Could watch this guy wrap anything..great instruction..first attempt coming this weekend!

  • @masquedebe713
    @masquedebe713 4 роки тому

    Excellent technique. Your expertise is what I’m trying to emulate.

  • @peters9869
    @peters9869 5 років тому

    You just fixed Tesla’s fit n finish issues. Looks awesome. Cheers my friend

  • @teddym2808
    @teddym2808 Рік тому

    Wow it actually looks so much better

  • @amandasaurusrex23
    @amandasaurusrex23 3 роки тому

    Wrap Daddy 😍😍💋 I love your precision and patience

  • @Blokkie
    @Blokkie Рік тому +1

    Just discovered this channel. Im already a huge fan. Was looking for some inspiration and guidance. I’m starting my first wrap project ever. I want to wrap my Fiat Panda (sport) in glossy red vinyl. Just ordered everything and will see how it goes. Man you’re channeling is useful and nice to watch 😊

  • @madebyscratch
    @madebyscratch 5 років тому +4

    Brandon needs a flashlight.. haha.. You make everything you wrap look so easy...

  • @EliCohen4283
    @EliCohen4283 3 роки тому

    The original wrap looks more realistic then the 2nd you apply but your work is better

  • @bagrbuckcustomhydrographic5697
    @bagrbuckcustomhydrographic5697 4 роки тому +8

    Final product looks great guys!

  • @davidwinn8492
    @davidwinn8492 5 років тому +3

    Thank you for sharing your knowledge and giving others power. 🙏🏽🙏🏽🙏🏽

  • @onerichartist
    @onerichartist 3 роки тому

    Stellar vid brother. Great voice, great camera angles. Thanks for posting.

  • @FactsUniverseGlobal
    @FactsUniverseGlobal 2 роки тому

    After you said you were really good with your fingers I heard that little laugh 🤣

  • @migdi242424
    @migdi242424 3 роки тому

    That was quite therapeutic.. Great job.

  • @marshallcolin71
    @marshallcolin71 2 роки тому

    Can't wait to try this on my car. Great video quality, and immaculate job.

  • @Nfamus_Kiwi
    @Nfamus_Kiwi 3 роки тому

    Looks good dude. But personally I would have tried to do it in 1 piece. When you use many cut pieces you can get the pattern going in the same direction but you can't get a uniform pattern alignment that matches perfectly between each section of console.

  • @biaggi150
    @biaggi150 3 роки тому

    Woah! That piece around the cup holders made me nervous, amazing job man! 👏

  • @rayban8680
    @rayban8680 4 роки тому

    This dude has mad skills. Was thinking of wrapping my side view mirrors but after watching I think I’ll pay to have it done.

  • @KBENNSLAPTOP
    @KBENNSLAPTOP 4 роки тому

    Rules say; "Keep Comments Respectful"!
    Christian, man I got Nuthin Except RESPECT Watching An Artist at Work. Awesome Job !
    How you managed with the Camera in your face, No Light and not being able to use the passenger seat, so you wouldn't have been working L/handed - and among All that, you still kept up with the chat !
    Nothing But Respect !
    I've done, vaguely similar, wallpapering at home, and I Always had to do It at Night, so I could have Peace 'n' Quiet !
    So thanks for a Great Demo, and making it look like Anyone with All their fingers 'n' thumbs in the Right place could do that job !
    😉☘PoD☘🤘
    🍀The Best Of Good Luck 2U 👍

  • @lummy321
    @lummy321 5 років тому +33

    Perfection as always brother ... Brendan does need a light though for the darker areas ... Phenomenal work as usual Christian bro . Peace 🙏🏁

    • @CKWraps
      @CKWraps  5 років тому +5

      We'll get another light. Can't have too many lights

    • @thuggy67
      @thuggy67 3 роки тому

      @@CKWraps shouldn't you spray a water proof something on it after ?

    • @younggod619
      @younggod619 3 роки тому

      @@thuggy67 you mean a wrap protection ? It’s like interior protection they spray so it doesn’t get dirty or sum shit like that lmao

    • @thuggy67
      @thuggy67 3 роки тому

      @@younggod619 lol ohh sorry I'm not that well knowledgeable about cars and so

  • @davidnorthover2812
    @davidnorthover2812 3 роки тому

    Hands of a surgeon

  • @julianbell9586
    @julianbell9586 Рік тому

    Amazing video. Such detailed work and precision. I like the two fingered control of the blade and delicate use of heat gun. Love the tips (careful where you put the heat gun, always retract your blade... I typically create jobs much bigger by mistakes unrelated to the job itself!). Video was good but camera man can lock off focus to the point he wants by tapping lock on the screen). I now have confidence on wrapping my BMW z4 without having to remove the dash trims. Excellent video and job. Thank you 👍

  • @cobaltuniversedotnet
    @cobaltuniversedotnet Рік тому

    I will admit I still use the old school 3m Di-Noc, but this looks really good.

  • @Stizy
    @Stizy 3 роки тому +1

    this was an insanely high quality video thank you

  • @OneThatDied
    @OneThatDied 5 років тому +1

    Looks clean, but the three panels don't quite match up exactly. The second panel is very slightly rotated counterclockwise and it doesn't look like one continuous piece. The second and last panel match up quite well, but you can clearly tell the difference in the first and second.

  • @trilla252
    @trilla252 5 років тому +4

    Dude...I swear...you make it look so damn easy.....lol.

  • @walkingthedistance
    @walkingthedistance 4 роки тому +1

    That's some quality wrap there!

  • @johnprevite6673
    @johnprevite6673 2 роки тому

    I know an artist when i see one 🤙👊

  • @rafidalbotany1109
    @rafidalbotany1109 2 роки тому

    Looks flawless 🔥🔥nice video and Instructions

  • @BowsettesFury
    @BowsettesFury 4 роки тому

    Wow that vinyl behaves so well compared to the crap I’ve seen and used. Looks amazing installed.

  • @AshwinLB
    @AshwinLB 4 роки тому +1

    Bought this carbon fibre wrap to cover the grey poplar trim in my 135i! I’m hyped!

    • @CaliXJ96
      @CaliXJ96 4 роки тому +1

      AshwinLB same here, how did yours come out?

    • @AshwinLB
      @AshwinLB 4 роки тому

      SoCalXJ really good! I just took my time with it and used heat for all the curves and stretched hard so it wouldn’t wrinkle

  • @vasylgrygoriv4155
    @vasylgrygoriv4155 4 роки тому +1

    Nice job

  • @robqcmccullum8797
    @robqcmccullum8797 3 роки тому

    Nice work, I hope you don't mind me making a suggestion but can you add a little more light, maybe investing in a LED that you can strap on your head or safety glasses with LED

  • @johnraycabrera4330
    @johnraycabrera4330 4 роки тому +2

    are there any wooden style vinyl wrap that you have done for the car interior trimmings? i know the wooden design element is a little outdated, but i think it is still classy.

  • @josephanderson3551
    @josephanderson3551 3 роки тому

    The exact video I was looking for. I have a 2020 F150 Lariat with black leather and they put silver trim around the vents, head unit, center column and on the wheel and doors. I was about to order some super expensive replacement parts but I'm sorry on wrapping now.

  • @edwinfig710
    @edwinfig710 4 роки тому +1

    Out of all the videos you have, this one triggered my ASMR the most

  • @Blessed.2.Teach.4God
    @Blessed.2.Teach.4God 4 роки тому

    Dang, that looks appx 106 times better than what was there.

  • @swndle1
    @swndle1 5 років тому +1

    Great Finished product love the tips and pointers to attain a better finished product, Awesome how you make it look so easy ‼️

    • @unadomandaperte
      @unadomandaperte 5 років тому

      rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=143416520322&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111