You and I have very similar taste; your F10 looks a heck of a lot like what mine will look like once I’ve made some more changes (I just got mine, which is also black, two weeks ago). Great video, great channel, and great car!
Love your attention to detail. And it looks fantastic. The tiniest gripe I have is that at the end of the video the thumbnails that popped up blocked the walk around shot LOL I wanted to see it unobstructed no big deal though. Great job 👍🏼
Love your f10 you also got me through my jb4 AND catless downpipes! Thanks! Also love seeing more enthusiasm in these videos you should have more subs!
Looks great that bruv.. Gonna put one on my f11 soon. It's the dark grey mine so I'm gonna have to get it sprayed first.. But I love it.. Greetings from Manchester UK..
This is very well done. I appreciate the attention to detail in your videos. You give practical tips that help give the professional look. I also appreciate that you find cost effective mods to install. Great content!
Thank you for the video and the detail you bring to the instructions I need to give you a bit of a warning on those rivets, they need to handle a big deal of pressure. It's a bit of dangerous using that, BMW only uses it on the wheelhousing Cover. When you run 140Kms/h plus weather with winds, that lip will under a lot pressure, thouse Rivets will Pop if not proper mounted or if they don't have quality to hold the Rivet under pressure. Use normal Pressure Expanding rivet, good quality or from BMW they are safer 1908077 are perfect to mount and dismount in case of need.
I installed this on my F10 a few weeks ago. The fit was not perfect, and it took some work to get right, but it looked pretty good once installed. The only problem with this product is that if you like to drive fast, it WILL fall off. I even reinforced like the video mentions. Unfortunately $200+ down the drain for me. Splitters might just be a better idea.
Looks great. I have an f10 but its carbon black. I think yours is the sapphire black looks clean but i would rather have the alloys gloss black as it will make it pop even more.
Looks like you did an intake mod also, I can see the filters through the front grill. Did you do a video on that? I saw one where it was a pain in the neck to get done. Thanks.
Love your videos. What do you recommend to shine my black f10. Yours look amazing. The previous owner ignored I. it has oxidized spots, faded and not so shiny. Thank you
There is but not from BMW and they look crappy. The M Sport body kit in my opinion is the only way because the normal body kit they come with is ugly and straight pretty much the M sport has that nice fang kinda look
Great work car looks awesome loving the content. Can I ask regarding the lip if your driving on the motorway/highway at a speed of 70mph will the lip rip off. I got the same lip as yours wanting to install it but rainy/cold in the UK atm so will do it at some point. Was concerned as I read on some posts that’ it’s common to fall off at speed. I used the method of screw and bolts as screws they provided is poor. Also having issue with the side bits not fitting perfectly so probably will need to use heat gun to round it off like in your vid. Interested in your comments or advice you may have. Thanks. Peace
Look very nice but I don’t understand are the screws going directly on the bumper? I just bought one for my f10 too and I’m not sure on the installation
Got installed one of does 2 times (first broke due the speed), both times side wings dont fully go to the frame of lights, why is that, how can I make it go in fully?
My lip isn’t screwing in on one side One side stays perfectly and the other just falls What can I do to hold it? Do you think the hole might be too big?
Great videos, I noticed in this one your car has black front and rear emblems. Where did you get them? I purchased some from Ebay however they had the wrong mountings. How are they held on?
I’ll add the EBAY link as well, they were out when I went to post the link so I wanted to give other options in the price range.Most of these are made in the same place just sold by different distributors.
the most beautiful sports sedan not only compared to the previous and following 5 series, but ever
You and I have very similar taste; your F10 looks a heck of a lot like what mine will look like once I’ve made some more changes (I just got mine, which is also black, two weeks ago). Great video, great channel, and great car!
Love your attention to detail. And it looks fantastic. The tiniest gripe I have is that at the end of the video the thumbnails that popped up blocked the walk around shot LOL I wanted to see it unobstructed no big deal though. Great job 👍🏼
Love your f10 you also got me through my jb4 AND catless downpipes! Thanks! Also love seeing more enthusiasm in these videos you should have more subs!
I love you energy and i hope you are gonna become a big UA-camr some day keep do what you do
Looks great boss. Living down a long dirt road means I probably won't go down this road. Wish I could though.
Oh boy looks so good now
Looks great that bruv..
Gonna put one on my f11 soon.
It's the dark grey mine so I'm gonna have to get it sprayed first..
But I love it..
Greetings from Manchester UK..
The company out of Ohio is ECS tuning. That’s their signature front spoiler lip. They are a great place for bmw aftermarket parts
Welcome back Dude
Great quality video thanks for lip link 👍🏻
Looks fantastic, amazing what a difference it makes to the car!👍
Looks very nice, I have the m-performance style splitter mounted as well on my 550ix. Cheers from The Netherlands 🇳🇱
This is very well done. I appreciate the attention to detail in your videos. You give practical tips that help give the professional look. I also appreciate that you find cost effective mods to install. Great content!
got the same type of splitter and this video really helped me out thank you!
You added the link!! Thank you so much
Looking good I added a pinstripe to my splitter makes it pop
Thank you for the video and the detail you bring to the instructions
I need to give you a bit of a warning on those rivets, they need to handle a big deal of pressure.
It's a bit of dangerous using that, BMW only uses it on the wheelhousing Cover.
When you run 140Kms/h plus weather with winds, that lip will under a lot pressure, thouse Rivets will Pop if not proper mounted or if they don't have quality to hold the Rivet under pressure.
Use normal Pressure Expanding rivet, good quality or from BMW they are safer 1908077 are perfect to mount and dismount in case of need.
I installed this on my F10 a few weeks ago. The fit was not perfect, and it took some work to get right, but it looked pretty good once installed. The only problem with this product is that if you like to drive fast, it WILL fall off. I even reinforced like the video mentions. Unfortunately $200+ down the drain for me. Splitters might just be a better idea.
same happened to me I bought another one and will use a bolt and nut that way it could hold up much better I think
Thats awsome ... been waiting since i heard you talking about installing the lip in the last video ! Thanks for making it happen
Wow ! Very nice job. Congratulations
Looks great. I have an f10 but its carbon black. I think yours is the sapphire black looks clean but i would rather have the alloys gloss black as it will make it pop even more.
I like your process way to fit it
it came out great!
Great work man!!! Just subbed 🤝
Awesome job! Can I pay you to install one on my 550I, please?
It’s not that hard to install it
I just got mine installed only last few day .. rock hit it and break my front lip
I haven’t seen the video yet I hope he says what lip it is ! I want it
Looks like you did an intake mod also, I can see the filters through the front grill. Did you do a video on that? I saw one where it was a pain in the neck to get done. Thanks.
Love your videos. What do you recommend to shine my black f10. Yours look amazing. The previous owner ignored I. it has oxidized spots, faded and not so shiny. Thank you
bro you're amazing
I wish there were more mods like this for those of us with 550i F10 without the M sport package
There is but not from BMW and they look crappy. The M Sport body kit in my opinion is the only way because the normal body kit they come with is ugly and straight pretty much the M sport has that nice fang kinda look
great looking F10! You really make high quality content! i definnitely sub to your channel. keep it up! :)
Good job 👏
DOPE! 🔥🔥🔥
Great work car looks awesome loving the content. Can I ask regarding the lip if your driving on the motorway/highway at a speed of 70mph will the lip rip off. I got the same lip as yours wanting to install it but rainy/cold in the UK atm so will do it at some point. Was concerned as I read on some posts that’ it’s common to fall off at speed. I used the method of screw and bolts as screws they provided is poor. Also having issue with the side bits not fitting perfectly so probably will need to use heat gun to round it off like in your vid. Interested in your comments or advice you may have. Thanks. Peace
Are you installing it on the M sport front bumper? It should hold up nicely if you are as it is basically a OEM part if you got it from BMW
Been a while since a new video... Where'd ya go? Covid change things for ya?
Look very nice but I don’t understand are the screws going directly on the bumper? I just bought one for my f10 too and I’m not sure on the installation
Awesome just discovered ypur channel can you do a drive by video for your car
Got installed one of does 2 times (first broke due the speed), both times side wings dont fully go to the frame of lights, why is that, how can I make it go in fully?
Hi , Loving the front bumper and lip , please can you share where you sourced these from ...looking to do the same to my 535D .
Have you had any problems with ur spacers? I’m thinking to have 20mm rear 15 front. I’m just not sure if it affect any ride quality etc
good stuff
My lip isn’t screwing in on one side
One side stays perfectly and the other just falls
What can I do to hold it? Do you think the hole might be too big?
This spoiler falls off at a speed of 240kph. Believe
Mine fell off at 115 mph (185 kph)
What size are your alloys ? And has your car been lowered ?
Do you plan on lowering the car? Also can u make an update how u built your cold air intake. U rushed through parts. Thanks
Yes, springs coming soon, I’ll look at doing another video for intake.
Great videos, I noticed in this one your car has black front and rear emblems. Where did you get them? I purchased some from Ebay however they had the wrong mountings. How are they held on?
Just clarifying eBay Splitter, but Amazon links?
I like the underside design too. What was the sellers name?
I have same question, thank you.
I’ll add the EBAY link as well, they were out when I went to post the link so I wanted to give other options in the price range.Most of these are made in the same place just sold by different distributors.
I just added the EBAY link for you, looks they they just added 14 more for sale.
Wich springs you have?
I will maybe buy an BMW F10 520d Xdrive. Can i do the same on that car? 🙂
Hey man, I was wondering how you got the black on you side markers to match your cars paint so well?
Video coming soon.
Where did you get the aftermarket reflectors on the front bumper
Links in my newest video.
Is it the same for the diesel, because I have the same pack M, and I dunno if it fits my 520d
watching this felt like cheating on my wife
Did you blacked out the window ?
Will it work if I don’t have the fog lights?
Were did you get the emblems? Are those just the overlays
Is this the carbon black color ?
Does it fit 2011 535GT?
Don’t think so.
Where do u buy it?
Where can I get the mesh/grill to buy that is infront the intercooler?
Do you have to use rivets?
No
Πολύ πρόχειρο ..
Poor camera angles, and annoying fast moves....
You talk way too much for an installation video. Talk less, work more.
Talk too much