So if I’m recording a band with the 2 Midas stage boxes, I can run all mics from drums, guitars and vocals to the stage box and run a cat 6 shielded wire to the wing, then interface with my pro tools? I’m looking to upgrade my recording studio, building a purpose built studio building and was going to run several patch boxes with snakes to the recording desk in a separate room.
hello drew your channel is awesome i have a question do you have a video explaning how to connect 2 berighers together for more channels. so sometimes we play with other bands that have a berigher x32 how can i use my berighers and theris together. HELP PLEASE.
I have 8 vocalists in my team. I have 2 mix busses leftover on my board. How can I take advantage of stage connect so that my vocalist have individual mixes on packs? Right now we are sharing the mix out of one p16 dedicated to them. Any suggestions?
Hi and thanks for your tutorials..kind of my life savers right now, maybe you have an idea on how to solve my issue : I'm using the x32 rack for iems and am trying to send 32 outs to FOH with a pair of DN4816-o my current rig is an x32 rack with an SD16 via aes50 allowing for 32 inputs for outputs i acquired 2x DN4816-o, hoping to be able to send 32 outputs to FOH via ultranet (as x32 rack do not have stageconnect). So apparently ultranet is limited to 16 outputs but is there a way to use the ultranet from the x32 to my first DN4816-o and the ultranet from my sd16 to the second DN4816-o ? Or maybe you have a better idea on how to send 32 unaltered outs to FOH while keeping our separate iem mixes from the X32 rack ? thank you so much in advance
What about 1 Wing and 2 Stage box // 2 Church , Can we create a Profile or only on show mode? We want to have 2 church sharing the same wing but we dont want to share our Stage boxes ( All mic and instruments will be set every time we come) Like John will have mic #1 Set to him every week on chuch A, and on Church B they will not use the mic 1. Please help.
Start by not using a CAT6 cable but rather a Shielded CAT5E. I have seen more than one stage box ruined by using CAT6. Then, since each box has 32 inputs, they will each need to be on a separate AES50 line (there are 3 available on the Wing). Finally routing is just the same as what Drew just explained for the Stage connect, but you would choose the appropriate AES50 line instead. Hope that helps!
hey drew nice to whatch your videos So I'm a sound technician and I reset my Behringer X32 table and encountered problems: Only a few tracks go to the stream on VMix software Although I mutte the sound always passes can you help me manage this problem? the computer is connected to the sound card of the console via usb cable and it is a large church can you help me
Has anyone tried to make a StageConnect link between a Wing to DN48xx box, running the XLR connection through a SoundTools CatBox on each side? We have that infrastructure installed now and it would be cool to be able to use it and not pull another XLR.
Virtual HIGH FIVE to You...
Great content! I'm curious. Are you using a green screen or is that a backdrop or real tiles? (it looks nice) Thank you
I really need them to drop a 2x2 or 4x4 in a rugged cube. These formats are good but there's more potential.
So if I’m recording a band with the 2 Midas stage boxes, I can run all mics from drums, guitars and vocals to the stage box and run a cat 6 shielded wire to the wing, then interface with my pro tools? I’m looking to upgrade my recording studio, building a purpose built studio building and was going to run several patch boxes with snakes to the recording desk in a separate room.
hello drew your channel is awesome i have a question do you have a video explaning how to connect 2 berighers together for more channels. so sometimes we play with other bands that have a berigher x32 how can i use my berighers and theris together. HELP PLEASE.
Hi, can i activate phantom power on the Stage Connect device?...i don't see it on the wing app on mac (offline)
I have 8 vocalists in my team. I have 2 mix busses leftover on my board. How can I take advantage of stage connect so that my vocalist have individual mixes on packs? Right now we are sharing the mix out of one p16 dedicated to them. Any suggestions?
What is the usb port used for? Can I connect a computer to send multi tracks?
Hi and thanks for your tutorials..kind of my life savers right now,
maybe you have an idea on how to solve my issue :
I'm using the x32 rack for iems and am trying to send 32 outs to FOH with a pair of DN4816-o
my current rig is an x32 rack with an SD16 via aes50 allowing for 32 inputs
for outputs i acquired 2x DN4816-o, hoping to be able to send 32 outputs to FOH via ultranet (as x32 rack do not have stageconnect). So apparently ultranet is limited to 16 outputs but is there a way to use the ultranet from the x32 to my first DN4816-o and the ultranet from my sd16 to the second DN4816-o ?
Or maybe you have a better idea on how to send 32 unaltered outs to FOH while keeping our separate iem mixes from the X32 rack ?
thank you so much in advance
What about 1 Wing and 2 Stage box // 2 Church , Can we create a Profile or only on show mode? We want to have 2 church sharing the same wing but we dont want to share our Stage boxes ( All mic and instruments will be set every time we come) Like John will have mic #1 Set to him every week on chuch A, and on Church B they will not use the mic 1. Please help.
Your videos are wonderful. Can you please explain how to connect the Behringer Wing to two S32 stage boxes using the Cat 6 cable?
Start by not using a CAT6 cable but rather a Shielded CAT5E. I have seen more than one stage box ruined by using CAT6. Then, since each box has 32 inputs, they will each need to be on a separate AES50 line (there are 3 available on the Wing). Finally routing is just the same as what Drew just explained for the Stage connect, but you would choose the appropriate AES50 line instead. Hope that helps!
hey drew nice to whatch your videos
So I'm a sound technician and I reset my Behringer X32 table and encountered problems:
Only a few tracks go to the stream on VMix software
Although I mutte the sound always passes can you help me manage this problem?
the computer is connected to the sound card of the console via usb cable and it is a large church
can you help me
Has anyone tried to make a StageConnect link between a Wing to DN48xx box, running the XLR connection through a SoundTools CatBox on each side? We have that infrastructure installed now and it would be cool to be able to use it and not pull another XLR.
Hi, great video. One question, do you know if it will be possible to have 3 x DN4888 to get 48 audio outputs?
hi. the docs says we are limited to 32 channels of bandwidth. if you try, let us know ; )
Maybe if you combine Stageconnect (XLR data cable) for the first 32 channels, and then use the Ultranet for the other 16?
Why would you use stage connect over AES?
For an example you could run an full IEMs system and wireless instruments inputs just the one cable and you not have to tap into your Aes50.
In this stage connect system, can we put only 32 inputs?
Yes
Blessed
What did you do about the channel with noise?
Drew was generating noise for a test example.
Hey bro do u strted degico console tutorial? For our
Thanks so much .but you have teach how to play audio recording by use effect group sections button