Mixer Basics with the Yamaha MG12XU
Вставка
- Опубліковано 14 гру 2024
- Kenton walks through the basics of using a mixer in your studio, with the Yamaha MG12XU as an excellent example. Learning to configure a microphone and guitar, use built-in effects, and interface to a DAW via USB.
Thanks so much for the informations given in this video. It's my first lesson of how to set up the mixer thou.Great job.
Watched a lot of videos on seti g this up. Yours by far was most informative. Got me up and running. Thank you very much!
You are most welcome, thanks for your comment!
Great job Kent! As you know I have the MG10XUF and this helped me better understand how this awesome tech works!. Thanks bro!
Good morning, thank you for making the very informative video. I'm not clear on one step, can the white fx/aux 2 knob handle both functions at the same time? Let me explain: if there are monitors connected to the aux2 output on stage and I operate the white knob, do I raise/lower the channel signal or increase/decrease the effect? I understood that I can only route the effect to the aux1 output. I hope I have explained myself clearly and thank you in advance for your reply.
Great job
Awesome! Thank you so much!!
How do you get different effects to the different inputs? You didn’t show how.
I'm afraid I misspoke on this point (now I sound like I'm running for President). You can't get different effects on multiple channels. You can only control the LEVEL off effecrts if you are applying the effect to more than one channel. You can of course change the effect you are using during a performance, but this becomes tricky if you are using the effects on multiple channels.
Couldn’t see what you were doing on the board 😢
I should have had the camera at a better angle, or multiple cameras. I unfortunately have no way to add more video to this particular upload, but I'm going to do a separate video as an update with a second camera overlaid.
Analog
Well Johnnnn Or Jimbo or hank or whatever you yanks call your children these days listen : I appreciate your time I do, you took your personal time to make this video and ya know it is good that folks like you do that but euhm......what you explained Jimbo well that is sort of what I figured out already with just spending 3 single seconds reading the euhhhhhh MANUAL !!!!! Euhm so my advice : when you make a video then ask yourself the question : What is it that people NEED to know and perhaps another question : What am I about to say in the video : is it or is it NOT information every primate with half a brain can figure out themselfs, now IF you ask those questions Jimbo then it can and it WILL give you a LOT more time to do other things because UA-cam these days it is BAD man !!!! And for SOME reason : the MORE devices you primates get and buy and the MORE internet connectivity you enjoy the LESS information you put out .... the JUNK that I find on UA-cam is STAGGERING Jimbo anddddd like I said I appreciate your time but do me and ESPECIALLY yaself a favor : next time : ask yaself these questions and if ..................... IF you have information that WE need to know then sure make that video but this Jimbo ? No this is just a waste of YOUR time and ours ! Carry on ! Keep rocking