I just set my bike up normally in the bed, crank them straps down real toight and simply lift on the swing arm and lift tail gate at same time resting the tire on top of the tailgate
I’ve been doing the tail gate trick for 15 years, works great. But after a few years of doing it the clip that secures the cord gets bent and breaks off.
When you go diagonal with bike and straps go to the foot pegs verses the bars, much better! The trick is getting the back tire up against the side of the bed. If you do it right it will lock itself in before you even get the straps on.
My truck is a ranger, so its especially hard for the tailgate to shut. I've never seen the cable trick, but I always take one of my older tie downs and use that. I hook one side into the cargo loop on the side of the bed and the other hook fits perfectly in the retractable latch side of the tailgate. Then i tighten the strap until the tailgate touches the rear tire. The extra tied down gets a quick tie to one of the rear spokes if i dont want it flapping around.
I love your videos so much! I would like you to please make a how to properly maintenance a two-stroke because I am just starting and I would want to know from you thank you for your videos you are the best! I have learned so much from you!
I didn’t know to run the bike and turn off the fuel if you’re gonna leave the bike for a while and didn’t know about the tightening spokes one either. Thanks 👍
Improvement on tip one, don't use zip ties, use normal wire, you can tighten it by coiling the ends together, cut them off and bend the coily end into the grip. That's also the way most pros do it.
@@TheMxFactory can you make a how to properly maintenance A two-stroke please I love your videos and I am a beginner I love to see it from you because you are so amazing thank you for your help I have learned a lot ever since watching your videos thank you!👍🏻
I think it is a great second or third bike but maybe not a first bike, I just bought one and this is my second bike but I am six foot but ahs great power.
I’ve always put my bike on the angle so I can just close my gate unless iv got a friend with me then my tail gate just dose the old bouncy bounce down the road as I cry thinking about how much a replacement gate with the step costs lol
I put my bike in at that angle. Then run my straps hooks through the foot pegs. Doesn’t compress the suspension at all. I’ve done it for years going across state. No problems at all!
i recently crashed my 2018 yz250f and the handle bars look like they're bent. I know they're not because I took them off and I checked them. But I realized what made them look bent was that the handle bar holders where uneven and thats why the handlebars are pulled back to the left. I aligned the front well too by loosening the triple clamp bolts and the front axle bolts, but it still look the same. How do I fix this?
Get a knobby knife or use a dremel to square up the edge of your tyre. Never turn it around because even tho it will give you slightly better grip it will decrease the brake grip
Another tip. If you put your dirtbike on your truck, but a small block of wood in between your front tire and the front fender plastic so the shocks don't go out
New to riding here can I do that carb trick on a 2 stroke someone told me would mess up bike because running engine dry thanks I use 93 pump gas and startron fuel stabilizer now
I liked the grips amd the spokes trick! They seem like something i will end up needing to do lol. If you go to the other post, I commented that the tittle of this video was dirt bike hacks lol
Tyler youre becoming a great character in yall channel.
the humor and the hacks and tips are absolutely helpful to me. thank you guys!
Hey u learned that tail gate trick from buttery films lmao just kidding man, very helpful video! Thanks dogg!!!
Thanks for the love ribble dean!
Same lmao
I think we all did
I just set my bike up normally in the bed, crank them straps down real toight and simply lift on the swing arm and lift tail gate at same time resting the tire on top of the tailgate
I’ve been doing the tail gate trick for 15 years, works great. But after a few years of doing it the clip that secures the cord gets bent and breaks off.
When you go diagonal with bike and straps go to the foot pegs verses the bars, much better! The trick is getting the back tire up against the side of the bed. If you do it right it will lock itself in before you even get the straps on.
My truck is a ranger, so its especially hard for the tailgate to shut. I've never seen the cable trick, but I always take one of my older tie downs and use that. I hook one side into the cargo loop on the side of the bed and the other hook fits perfectly in the retractable latch side of the tailgate. Then i tighten the strap until the tailgate touches the rear tire. The extra tied down gets a quick tie to one of the rear spokes if i dont want it flapping around.
I love your videos so much! I would like you to please make a how to properly maintenance a two-stroke because I am just starting and I would want to know from you thank you for your videos you are the best! I have learned so much from you!
I love your comment I think so too
I didn’t know to run the bike and turn off the fuel if you’re gonna leave the bike for a while and didn’t know about the tightening spokes one either.
Thanks 👍
Zip tie hack is GOLD!
Improvement on tip one, don't use zip ties, use normal wire, you can tighten it by coiling the ends together, cut them off and bend the coily end into the grip. That's also the way most pros do it.
The Zipp Tie tip is a great idea 🤟😁
Thanks!
You like rock pop or electronic?
@@TheMxFactory can you make a how to properly maintenance A two-stroke please I love your videos and I am a beginner I love to see it from you because you are so amazing thank you for your help I have learned a lot ever since watching your videos thank you!👍🏻
Is a crf 150rb good for a 5'5 beginner?
I think it is a great second or third bike but maybe not a first bike, I just bought one and this is my second bike but I am six foot but ahs great power.
@@aydenhaskins2630 what would you recommend as a first bike?
Very powerful 🙌
@@nicki3305 crf 125f
You'd really enjoy the crf 110 at your height as a first bike too 🤙
I got a tip for bike number 297, put some wd40 on that factory pipe after washing it!! Haha, good video Tyler like your content
You could also use a Dremel with a cut off wheel to square up your treads.
Hack #11: make sure to check the chain adjuster bolts on that #318 YZ
I’ve always put my bike on the angle so I can just close my gate unless iv got a friend with me then my tail gate just dose the old bouncy bounce down the road as I cry thinking about how much a replacement gate with the step costs lol
I put my bike in at that angle. Then run my straps hooks through the foot pegs. Doesn’t compress the suspension at all. I’ve done it for years going across state. No problems at all!
Would you ever do a video on proper shifting and braking technique while standing up?
Omg I actually got the tittle right!
Well except for the number 10 (I didn't guess a number)
NICEEE
Can you do a vid how to ride a root
We will add it to the list👋
Root or rut?? 🤔
She’s stable as able! 🔥🔥🔥👍🏽👍🏽👍🏽👍🏽
oh yeahhhh
What’s up mx factory love your vids they are so helpful
Thanks for the support, we love to help any way we can!!
@@TheMxFactory yeah they are really help full
Woooo
woooooooooo
I don’t even have a dirt bike but I love ur videos
Why is there such a big black “line” on the husky exhaust? Have the same “problem” if it is a problem..
4:45 is actually so smart
i recently crashed my 2018 yz250f and the handle bars look like they're bent. I know they're not because I took them off and I checked them. But I realized what made them look bent was that the handle bar holders where uneven and thats why the handlebars are pulled back to the left. I aligned the front well too by loosening the triple clamp bolts and the front axle bolts, but it still look the same. How do I fix this?
would you recommend a honda crf 125 as a first bike?
1st life hack is like dirt bike ASMR ahaha
best tip video...EVER
Use an air line and blow between the gap of the grip and the handlebar, the grip will ride on the air and easily slide on or off with little effort.
Thanks for the oil change /stand hack. You guys are awesome!!!
Putting your air filter under the dryer vent works great too takes like 5 minutes to dry
Get a knobby knife or use a dremel to square up the edge of your tyre. Never turn it around because even tho it will give you slightly better grip it will decrease the brake grip
Thanks brother great vid
Question what bike do you use?
I clicked the" thumbs up"..cause that's how I roll.
great and practical tricks for the common person, in the old days they would call this type of wisdom, experience, subscribed
Thanks for joining the team, there’s a lot of us, but we all have one common interest, 2 wheels 🤘🏼
hey I'm thinking about getting a dirt bike it can't be too expensive and it needs to fit a 15 yo.
if your looking at 250 4 strokes then buy somewhere between 2010 and upwards, Mostly they cost around 2-3k if they are like 2017 or something.
@@jaggy4770 thanks my dude this info is going to help me a lot
with number 7 you do know there's a hole in the top of your stand so you could just use that, well that's what I use it for
Hey man just rewatched your video on how to whip and imma send it when I go next week, thanks for the tips man keep up the great work
Any tip how to fix a flat without scrathing the rim
Liked before the intro finished. Love you Tyler
Dude you put out alot of great content. And you make everything look so easy. Can't get enough mx factory!
For number 5 two strokes are where its at because the pipe gets just warm enough to dry em off real quick
Codys one was very good nice job fellas
Another tip. If you put your dirtbike on your truck, but a small block of wood in between your front tire and the front fender plastic so the shocks don't go out
thank you
that first tip is great
Bro you guys at max factory have such a fun job doing what you love all your life!!! Thanks for giving us useful content
We love it! Thanks for the support💪💪
Is the 3rd tip just for 2 strokes...not 4 strokes? ( I'm new to dirtbiking, this is so helpful). New sub😁
no, 4 strokes too. if a four stroke isn’t fuel injected it’ll have a carburetor just like a 2 stroke and has a gas on off switch
New to riding here can I do that carb trick on a 2 stroke someone told me would mess up bike because running engine dry thanks I use 93 pump gas and startron fuel stabilizer now
Startron is very good 👍
Holy crap new vid
Thanks for these!
Can you do one for quads
Well how do you eat a burrito well going over whoops I need more helpful hacks! For real life problems. Great videos.
Man, you really shrank the bike down with that leaf blower😂🇸🇪
Owen Wilson stunt double.
Just wanted to say your videos help a lot, thanks
Thank you!!
What boots do recommend
love your videos!!
Wonderfully nice
wonderfully thank you!
Hey! Greetings from Guatemala, I really like your videos keep doing what you do! Do you guys sell bikes?
@themxfactory you replied to a lot of comments
Hey can you make a video on a ktm and just ride on a track and throw some whips or make a video on how to make a take a 2 stroke engine apart
I just bought a sx 85 and realized the spokes were loose
Which hack was your favorite?????👌👊🤘
All of them what part of Texas are you right now
All of them on what part of Texas are you now
@@williamcastillo9795 We are in Austin!
I liked the grips amd the spokes trick! They seem like something i will end up needing to do lol. If you go to the other post, I commented that the tittle of this video was dirt bike hacks lol
@@TheMxFactory nice I went there last summer 😎😎👌
First
wooooo💪
10th
😂
Yo I am such a big fan
Does hack #3 apply to 4-strokes as well?
Yes
I’ve done number 3 before with my bike and it would not start for like 30 minutes, it took like 20 times to bump start it
This would be so helpful. If I had a dirt bike.
buy one
Colby Barbour I wish it were that simple
what music do you use in your videos
I washed my bike yesterday these are useful
First again boys 💙
(3rd)
NICEEEEE
These are helpful
u should do some track riding with a gopro or trail
Can yall do a enduro channel
Hi
👋👋👋
Nice
i’ve always poured a tiny bit of petrol in my grip and worked it around then it slides on and then it evaporates
Wish I had a bike to use these hacks on lol
You will one day!
F8 Infection same
Were can I get those Mx factory graphics
use a tie-down from the latch on the tailgate to a hook in the bed... then you don't have to take off the cable every time
Thanks for the tip!
He missed the perfect opportunity to say "Im super spoked"
Can u guys plz do a vid on how to handle a bike with SERIOUS speed.
How about a how to corner standing video
you also can use a hair dryer
the 1st one would have been helpful yesterday
what bike is that?
He learned the tail gate from buttery films lol good vid tho
Nope. Don’t watch them...
@@TheMxFactory why not😂
the intro haha
Thanks for the tips I definitely learned some shit!
This helped me I found out that my spocks are relly lose
now I need a leaf blower AND some bacon
Here’s a little tip if you don’t have grip glue “simply just doesn’t use grip glue”
10 is just a legit Dad hack
Don't mind me asking how do you transport you bikewhen you don't have a car
Who mad graphics kit for bike in hack 7 thanks
hi i have a question does riding dirt bikes actually use all your mussel i know a friend that believes this is not true just asking to make sure
Wouldn't letting the bike run out of fuel with the petcock off cause a dangerous lean condition ?
Lol or just drain the oil through the hole in the stand but still a good video
Yo
yoooooo
I bought a new rear fender and a seat cover and stickers from your store