Dirt Bike Channel that’s probably because those premiere things are enjoying. You think the video is already online so you click on it but it is just a premiere thing. Those people who disliked were probably just annoyed because they couldn’t watch te video.
Even if you have a ton of experience, its always good to watch these types of videos to pickup new tricks or just remember old ones you forgot about. 👍 lol love the outtakes
Fortnine has two good videos on chain lubes and cleaners. Recommends using simple green and a light (20w-50 IIRC) gear oil for cleaning then lubing. Simple green cleans without penetrating the seals that trap grease on the bushings, and gear oil penetrates and protects from rust well, however it picks up more contaminants during a ride than a PTFE dry lube.
Extra tips for you to add since this epic video can only get better. Sorry if you know these already. 1. When pulling a broken down bike with another other bike wrap the strap around the handle bars and instead of tying a knot hold the end on the grip...release your hand and the wrap unwinds nicely and safely. 2. Putting some air in a tube before mounting the tire does wonders for not pinching tubes. 3. Short people have a tougher time lifting a bike onto a stand...they want to lean the bike farther over before lifting and use the thigh of one of their legs to help lift. 3. The most popular tires are worthless in soft dirt...can't make a hill climb and get a IRC MB5...rides well on trails and will amaze everyone on the climbs and doesn't wear quickly. 4. You probably know now but hoses exist to screw into oil plug for quick draining. 5. When mounting a rear tire sit on the ground straddling the swing arms from the rear. Your legs work miracles for holding up the wheel while you finagle it on hoping the spacers won't pop out. 6. Tusk makes spacers that are smooth and don't pop off easily when mounting the year tire. 7. Cushion seats are amazing now...some performance lost but great on trail breaking bumps. 8. High compression radiator caps for technical slow riding. 9. Don't forget to turn bike on after filling full of oil because oil filter takes up a lot of oil and you will need to add more. 10. Make sure electrical components like starter relay aren't jiggling around because electrical parts don't like such things. I replaced my battery with an oversized one and therefore relay needed taping down after I realized the seat wasn't holding everything in place. Got to go, but hope that helps you add content. I have many more weird tips if you want...just ask.
Kyle, your vids are not only informative but also funny. I appreciate you showing the bloopers, they were very funny. Pls show more of them on each video
Great tips. Lots of "why didn't I think of that" stuff. A favorite thing I do is use an electric leaf blower to dry out the nooks and crannies after washing. Then hit it with the SC1 as Kyle mentioned.
Dude! That is LOTS of wisdom! I've been wrenching for 30 yrs and just picked up a few more tips! So I thank you, and I urge people to SUBSCRIBE to what homeboy is spit'n. I'm keeping this one for a check list.
Swing arm covers damage your finish more than they save. Remove and clean under them often or just put decals on. Make sure to ride your brakes and glaze the pads up good so they don't work good. Several aggressive stops letting them cool in-between is the correct way. Oh, use chain lube. Otherwise, do what he said.
Like the outtakes at the end , that’s me alright many takes 😂 Some nice bits like the stainless swing arm guard fasteners 🤔 Have you seen my 300 build😬👍🏻
Hi Kyle, I know shops and dealerships HATE when they have to change a tire with slime tire sealant in it but I feel just the opposite. Actually got the tip from the guys over at Tubliss to use Slime as a lubricant when mounting a new tire. I "paint" the high pressure tube and inside of my tires with Slime before install. Everything slips into place easily and cleans up with water. A few ounces in the low pressure chamber afterwards keeps everything lured inside to prevent friction and flats. I was always told NOT to use standard WD40 on a chain because it's a degreaser not a lubricant. Maybe you can clarify? Love your channel. Makes me happy every time I buy a product using your links (which is way too often!) That I can help support you and your family. Keep up the good work and the outtakes at the end!!! J
Basically WD 40 helps give temporary lubricant to the O-Rings. It won’t harm the rubber. I use Chain Wax directly on each ring, but WD 40 works and is also good because you can spray the whole chain and wipe off the excess with a rag. WD 40 can also be used for a chain cleaner.
The end of the video is magic. Just when we thought you were a robot the truth comes out! Either that or your firmware needs updated :) It reminds me of every instructional video I've started but never followed through with.
Some good Tips, THX for that! One thing to complain: please don't use Baby Powder to prevent Snake bites, take Talkum powder! And Grease is no good, because it will dry out soon or, for the worst, it may damage the Rubber of the tube. After all, I use only Mousse and the troubles are totally gone. Greets
Awesome again! Should do a fast pace riding tips and tricks one of these days. Something we can watch right before we go riding to remind us of all the stuff to think about to make us a little better that day. Thanks again Kyle for kicking ass.
Kyle from experience put your bar mounts back into the rear two holes on the Yamaha, it kills the handling, makes the bike steer way too quick and knifey in the front holes. Trust me on this 👍
Love all the tips.. I'll have to bookmark this for sure as I'll never remember them all. Bloopers were great as well. Glad its not just me that has to record things a few times.
A tip about brakes after a wheel/ tire change. Your brakes will be VERY weak for the first few times you hit them. Sort of like bedding in the new brakes
Kyle, Your tip (#34) to install the carb slide spring is brilliant! Some of the smaller carbs are a real pain and this was an excellent tip that I'll use sometime in the future.
The tip on steering head bearing tension is still wrong kyle. Adding the caption to release the fork clamps is some of the correction, but the tension is not obtained from the bolt on the top of the triple clamp. It is obtained by adjusting the two collar nuts that lock together under the top clamp....🙄. Crank as much tension as you like on the nut or bolt on top of the top clamp, you are only tightening it against those two locking collar nuts. The bearings are under those...
Here's a tip for YOU - Get a Brush/Crash Guard that bolts into the bar end. It will protect everything in the whole control group on both sides. The one you are using will flex out of the way and is very short which allows everything to contact the ground before the guard (see 0.44). The full protector will save a lot of damage to controls. It will also brush away stuff that could get caught between between your brush guard and control group, as well as actually protect parts of your hand from brush hits, because it is so far away from the end of your hand. Your short Guard is also the reason for some of your tips. Chain lube - WD-40 is good. It comes off easily also when cleaning - taking dirt with it. However a DRY LUBE doesn't sling off. I use Teflon Multi-Use Lubricant, works great.
Just got myself a 2020 yz250fx.. my last bike was a 2017 yz450f and it was great in open terrain but like fighting a bear in tight stuff. Look forward to the review on that I have about a month of snow melting before I can ride. Always had big bore bikes and this channel is why I dropped down to a 250f.. I'm no travis pastrana lol
the grab strap is my fav, bikes USED to have a frame loop at the back to grab, now all you have is plastic fender. Going to make a strap that uses the seat mount bolts for mine, that is a great idea.
Great vid! I miss Will’s coaching! He is a lot of fun and amazing to watch hitting the table-tops in a CRF125F! Hope to see you guys soon, and love the merchandise!
Great tips video! One more tip iv'e heard is to hit the spokes inside the hub to make sure they set alot better when they are new Because they usally have some edges that catches the sides and when you hit the spokes they set down alot more in the rim.
Hi there are a lot of French people looking at you which I would love if you could put the subtitles in French continue what you are doing you make us dream
Kyle, I stumbled upon your channel a few months ago and I have to say "Thank You!" I have become a #1 FAN. Thank you for the awesome tips and your videos.
I just ordered one of those drifters products flexible funnels. Those look super useful to drain coolant on my 250x without having to take off my skid plate. Thanks for showing that Kyle.
Love the videos you put up on maintanance and tricks like these! Already subscribed! I’m new to the enduro lifestyle and already learned so much to do on my own. Spares me a lot of unnecessary expenses at the repair shop. - keep up the good work! Greetings from Germany
0:40 I could've used that a few months ago when my used to be friend slid and landed on the clutch and it broke. That wasn't a very good night because we eventually got into a fight because of reasons not related to the bike breaking. Great video!
Happy to see you got a 2020 YZ250FX! I can’t wait to see some videos on this bike, after years of being away from riding I just bought a new 20 FX. I’m in Indiana and won’t be able to ride it for a couple more months so I can at least see you ride it😆
Ok you could of told me about threading the spring onto the throttle cable BEFORE I spent countless hours adjusting jets. But in all seriousness awesome tips! Love your videos 😁
This is an awesome video, everyone has different tips they’ve picked up over years of trial & error so to cram this many into a 15min video is 👍 Thanks man
Great tips! Some I knew and forgot about and some I never heard of. Just remember Kyle, there's always going to be jealousy out there, especially the more subscribers you get!
Just a friendly tip for tubes, you can install tube inflate it a little and then install the tire and tube on the rim using liquid wrench silicone spray
I will probably remember none of these, but every single one I was thinking..."Yeah I gotta do that...Ohh another one!"
I was thinking oh I need a bike😆
Same!!!
Metro illz lol
Same
@@metroillz3355 lmao mee too
I noticed that this video already has dislikes before it's even live. That makes me smile. You've got to admit that is pretty funny.
Dirt Bike Channel that’s probably because those premiere things are enjoying. You think the video is already online so you click on it but it is just a premiere thing. Those people who disliked were probably just annoyed because they couldn’t watch te video.
@@kjv9890 i see no dislikes here
Maybe its Jeff Slaven, the know it all guy. lol
@@stfuliberal He does know a lot.. Blokes like you, know nothing and bag others @@
Effing trolls. I wish we could track em down and make em public.
There was a big whole in the back of my bike that puffed air out, so i silicone it all up.
like the exhaust? ahhaha
chihuahua verde yeah it was a joke
I must not be letting mine cure up good enough cuz as soon as I start it, it blows out. And mines a 2 stroke so it’s really oily
@@JohnSmith-ws6jg use flex seal and directly pour 2 hole containers into the hole. Then the hole should stop leaking and spitting out fumes.
Nick the lick got it! Thank you for the help! 😎
Love the energy of this video! Makes it feel like I learned a whole lot in like 4 or 5 minutes.
Been riding for 35 years and still learned some tricks, thank's man!
Even if you have a ton of experience, its always good to watch these types of videos to pickup new tricks or just remember old ones you forgot about. 👍 lol love the outtakes
That WD-40 is NOT a chain lube, it’s a all in one spray. So it also does DEgreas your chain.
Fortnine has two good videos on chain lubes and cleaners. Recommends using simple green and a light (20w-50 IIRC) gear oil for cleaning then lubing. Simple green cleans without penetrating the seals that trap grease on the bushings, and gear oil penetrates and protects from rust well, however it picks up more contaminants during a ride than a PTFE dry lube.
Man I just treat my chain like it owes me money and I get to go to dinner early not screwing around with cleaning it
@@PapaWheelie1 mannn thats a whole mood!!
Yeah WD40 washes away the lube, dries out, and leaves a sticky layer that collects abrasive dirt and sand.
Stephan Moore II - Lol chains are cheap. Time isn’t
Awesome fast pace. How long until we hear the review and update about the Yamaha? I know a lot of us are surprised to see it. Love it keep em coming!!
I'll have some UA-cam content on it next week. Posted on IG and FB yesterday on the bike
Extra tips for you to add since this epic video can only get better. Sorry if you know these already. 1. When pulling a broken down bike with another other bike wrap the strap around the handle bars and instead of tying a knot hold the end on the grip...release your hand and the wrap unwinds nicely and safely. 2. Putting some air in a tube before mounting the tire does wonders for not pinching tubes. 3. Short people have a tougher time lifting a bike onto a stand...they want to lean the bike farther over before lifting and use the thigh of one of their legs to help lift. 3. The most popular tires are worthless in soft dirt...can't make a hill climb and get a IRC MB5...rides well on trails and will amaze everyone on the climbs and doesn't wear quickly. 4. You probably know now but hoses exist to screw into oil plug for quick draining. 5. When mounting a rear tire sit on the ground straddling the swing arms from the rear. Your legs work miracles for holding up the wheel while you finagle it on hoping the spacers won't pop out. 6. Tusk makes spacers that are smooth and don't pop off easily when mounting the year tire. 7. Cushion seats are amazing now...some performance lost but great on trail breaking bumps. 8. High compression radiator caps for technical slow riding. 9. Don't forget to turn bike on after filling full of oil because oil filter takes up a lot of oil and you will need to add more. 10. Make sure electrical components like starter relay aren't jiggling around because electrical parts don't like such things. I replaced my battery with an oversized one and therefore relay needed taping down after I realized the seat wasn't holding everything in place. Got to go, but hope that helps you add content. I have many more weird tips if you want...just ask.
You just got a new patron. As a new rider I cant thank you enough for all of your content! The unknown is becoming less scary.
Kyle, your vids are not only informative but also funny. I appreciate you showing the bloopers, they were very funny. Pls show more of them on each video
they are a lot of work, and usually I'm just ready to be done :)
I am categorizing this one as the SUPER-VID, the mother of all dirt bike hack videos. Thank you, Kyle, extremely well done!
Perfect pace for this kind of video! Well done. I watched to the end and didn't skip ahead or sigh once. :) Thanks Kyle.
Loving the outtakes at the end :) thumbs up. Watching from the UK.
Wow...been riding for years and still learned 44.5 things, :) Thanks guys!
Im from South Africa, 51 years old, and just got my first KTM 350 EXC-F, Thanks for all the tips.
Great tips. Lots of "why didn't I think of that" stuff.
A favorite thing I do is use an electric leaf blower to dry out the nooks and crannies after washing. Then hit it with the SC1 as Kyle mentioned.
Dude! That is LOTS of wisdom! I've been wrenching for 30 yrs and just picked up a few more tips! So I thank you, and I urge people to SUBSCRIBE to what homeboy is spit'n. I'm keeping this one for a check list.
Swing arm covers damage your finish more than they save. Remove and clean under them often or just put decals on. Make sure to ride your brakes and glaze the pads up good so they don't work good. Several aggressive stops letting them cool in-between is the correct way. Oh, use chain lube. Otherwise, do what he said.
Like the outtakes at the end , that’s me alright many takes 😂 Some nice bits like the stainless swing arm guard fasteners 🤔 Have you seen my 300 build😬👍🏻
"ride it around the bruh"
The bloopers at the end explain how difficult it really is to make videos like this. Good job man, keep up the great work!
That new Yamaha 250 is looking nice, hope to see some videos of the beast soon :D
Soon. I posted in IG about it yesterday.
Hi Kyle,
I know shops and dealerships HATE when they have to change a tire with slime tire sealant in it but I feel just the opposite.
Actually got the tip from the guys over at Tubliss to use Slime as a lubricant when mounting a new tire.
I "paint" the high pressure tube and inside of my tires with Slime before install. Everything slips into place easily and cleans up with water. A few ounces in the low pressure chamber afterwards keeps everything lured inside to prevent friction and flats.
I was always told NOT to use standard WD40 on a chain because it's a degreaser not a lubricant. Maybe you can clarify?
Love your channel. Makes me happy every time I buy a product using your links (which is way too often!) That I can help support you and your family.
Keep up the good work and the outtakes at the end!!!
J
Basically WD 40 helps give temporary lubricant to the O-Rings. It won’t harm the rubber. I use Chain Wax directly on each ring, but WD 40 works and is also good because you can spray the whole chain and wipe off the excess with a rag. WD 40 can also be used for a chain cleaner.
Really liked the handle on the seat idea
The end of the video is magic. Just when we thought you were a robot the truth comes out! Either that or your firmware needs updated :) It reminds me of every instructional video I've started but never followed through with.
Some good Tips, THX for that! One thing to complain: please don't use Baby Powder to prevent Snake bites, take Talkum powder! And Grease is no good, because it will dry out soon or, for the worst, it may damage the Rubber of the tube. After all, I use only Mousse and the troubles are totally gone.
Greets
Awesome again! Should do a fast pace riding tips and tricks one of these days. Something we can watch right before we go riding to remind us of all the stuff to think about to make us a little better that day. Thanks again Kyle for kicking ass.
I love the bloopers! Great video and better info, I was surprised at all the tips I didn't know!
Kyle from experience put your bar mounts back into the rear two holes on the Yamaha, it kills the handling, makes the bike steer way too quick and knifey in the front holes. Trust me on this 👍
Wow Kyle thats a video every dirt bike owner should watch
Best tip video of all time! No joke. Thank you
Just took the MSF Dirt Bike School course. And with your hacks, I'm really ready to get out there!
Love all the tips.. I'll have to bookmark this for sure as I'll never remember them all. Bloopers were great as well. Glad its not just me that has to record things a few times.
Great vid.... I got a couple of good tips and Ive been on dirt bikes for 33 years
Hahahaha! Loved the bloopers at the end. Keepin' it real. Awesome.
@Telegram me @👉Dirtbikechannel I don't have Telegram.
A tip about brakes after a wheel/ tire change. Your brakes will be VERY weak for the first few times you hit them. Sort of like bedding in the new brakes
Good tips I'm not putting silicone on my chain slider though
very nice tips thank you! and props for showing fails at the end cuz many people think its easy to make content and record everything in 1st try..👍
Kyle, Your tip (#34) to install the carb slide spring is brilliant! Some of the smaller carbs are a real pain and this was an excellent tip that I'll use sometime in the future.
Man were those bloopers ever funny😆 shows how much time is put into these videos
The struggle IS real brother! Those are fantastic tips! Subbed and saved this vid to my maintenance playlist!
The tip on steering head bearing tension is still wrong kyle. Adding the caption to release the fork clamps is some of the correction, but the tension is not obtained from the bolt on the top of the triple clamp. It is obtained by adjusting the two collar nuts that lock together under the top clamp....🙄. Crank as much tension as you like on the nut or bolt on top of the top clamp, you are only tightening it against those two locking collar nuts. The bearings are under those...
Need this in a pdf document! Great vid
Here's a tip for YOU - Get a Brush/Crash Guard that bolts into the bar end. It will protect everything in the whole control group on both sides. The one you are using will flex out of the way and is very short which allows everything to contact the ground before the guard (see 0.44). The full protector will save a lot of damage to controls. It will also brush away stuff that could get caught between between your brush guard and control group, as well as actually protect parts of your hand from brush hits, because it is so far away from the end of your hand.
Your short Guard is also the reason for some of your tips.
Chain lube - WD-40 is good. It comes off easily also when cleaning - taking dirt with it. However a DRY LUBE doesn't sling off. I use Teflon Multi-Use Lubricant, works great.
Just got myself a 2020 yz250fx.. my last bike was a 2017 yz450f and it was great in open terrain but like fighting a bear in tight stuff. Look forward to the review on that I have about a month of snow melting before I can ride. Always had big bore bikes and this channel is why I dropped down to a 250f.. I'm no travis pastrana lol
All good tips , as soon as the snow melts I will be working on these skills . Thanks
Thank you so much especially for lifehack spring for carburetor !!!!! Respect from Russia.
the grab strap is my fav, bikes USED to have a frame loop at the back to grab, now all you have is plastic fender. Going to make a strap that uses the seat mount bolts for mine, that is a great idea.
Damn that was a lot of information coming at me very fast,think I got some stuff locked down. Good job man!
Great vid! I miss Will’s coaching! He is a lot of fun and amazing to watch hitting the table-tops in a CRF125F! Hope to see you guys soon, and love the merchandise!
Carb spring tip. Priceless 👍
beyond exc video. keep them coming thanks DBC
Great hacks video! Thank you for all these pointers. They are very helpful.
Awesome video. Many things I've forgotten....
Just when I thought I knew everything! Thanks so much.
Great tips video! One more tip iv'e heard is to hit the spokes inside the hub to make sure they set alot better when they are new
Because they usally have some edges that catches the sides and when you hit the spokes they set down alot more in the rim.
I know the struggle of getting the correct words out when talking to a camera 🤣 awesome video, some great tips in there!!
Hi there are a lot of French people looking at you which I would love if you could put the subtitles in French continue what you are doing you make us dream
bloopers at the end LMFAO ahaha bro you had me in tears. subscribed.
Thank you for putting this together, very helpful!
Kyle, I stumbled upon your channel a few months ago and I have to say "Thank You!"
I have become a #1 FAN. Thank you for the awesome tips and your videos.
Thanks for taking the time to put this together.
I just ordered one of those drifters products flexible funnels. Those look super useful to drain coolant on my 250x without having to take off my skid plate. Thanks for showing that Kyle.
You are welcome
Awesome video! sound effects is hilarious.
Love the videos you put up on maintanance and tricks like these! Already subscribed! I’m new to the enduro lifestyle and already learned so much to do on my own. Spares me a lot of unnecessary expenses at the repair shop. - keep up the good work! Greetings from Germany
Holy shit dude
This is just an incredibly simple video chalk full of solid knowledge nuggets
Subscribed!
0:40 I could've used that a few months ago when my used to be friend slid and landed on the clutch and it broke. That wasn't a very good night because we eventually got into a fight because of reasons not related to the bike breaking. Great video!
Happy to see you got a 2020 YZ250FX! I can’t wait to see some videos on this bike, after years of being away from riding I just bought a new 20 FX. I’m in Indiana and won’t be able to ride it for a couple more months so I can at least see you ride it😆
Another Yz!! That blue looks fine in your shop!!
It's awesome too!
@@DirtBikeChannel a 2020 250fx? Looks fantastic!
A small fishing box for pan fish will hold bolts washers and some first aid stuff if needed
This is awesome! Thank you so much. I didn’t anticipate so many of these to be so relevant and helpful.
Ngl This may be weird but I just really like filling up those things with silicone on my yz 125. And also 5:20 tip 21 is my favorite, thanks
All excellent tips, not like the ones given by certain others on here
Nice work, I wish I could play with dirt bikes for a living.
Ok you could of told me about threading the spring onto the throttle cable BEFORE I spent countless hours adjusting jets. But in all seriousness awesome tips! Love your videos 😁
Great video helpful tips. Loved the bloopers at the end!
I appreciate all that you do for us dirt bike lovers, good video
Thanks this is one of the shortest yet useful information dense videos I've seen
Love the tie off tip!
Now my brain has seized
Might have to watch 200 more times in the future
OMG THE 3RD ONE I LOVE IT THANK YOU SO MUCH
This is an awesome video, everyone has different tips they’ve picked up over years of trial & error so to cram this many into a 15min video is 👍 Thanks man
These videos are actually brilliant👍
Loving the struggle is real part! Keep it up😊
Great tips and loved the bloopers!
Great tips! Some I knew and forgot about and some I never heard of. Just remember Kyle, there's always going to be jealousy out there, especially the more subscribers you get!
Love the bloopers! We’re so human!
Pretty nice hacks thank you
Just remember if your not falling your not having fun 😁
agree. the struggle is real. Great content
I liked the fuel filter sack that goes inside the tank and that small hand air pump. What could be the price of each of them? Thanks.
Some of these are really amazing for a beginnner. Great video.
Honda pro chain lube with moly. Best stuff I’ve ever used.
Probably THE best And most efficient vid of hacks on Tube.
Excellent Job KB!!
Thanks Kyle, you rock!
Just a friendly tip for tubes, you can install tube inflate it a little and then install the tire and tube on the rim using liquid wrench silicone spray
A massive respect for showing the mess up's at the end your a dude 👍
What a great informational video, Thank you!
Good information, Thanks to take your time to make it, i know is gonna help many people like it does with me...
great tips!! I have been riding trails, motocross, supermoto, supermoto stunt and learned some good stuff from this video, thanks!
Thank you for this list. Good video.