How do you feel about the MaxFLow BOV now? I have had it on for about 6 months here in Cali and low-key it is ridiculously loud lol. The sound reflect off everything, cars, sidewalks, walls, and it is so loud! lol sounds good but loud
Love the sound doing research for boosting my s550 this year and this helps alot, i know a lot of people doing like that sound but i love it, previous car was an import an this kinda satisfies my desire.
Nice video. I ended up changing my blow off valve on my 350 Z set up and it definitely makes a big difference and it is definitely a head turner and like you said it is extremely extremely loud and it’s definitely a head turner but out here in California it’s definitely a head turner for the cops to so I usually take it on and then put the old one back on because I can only take so much of it myself I think I only bought it back on when I’m doing shows or anything like that but for daily driving when I am driving it I go back to the original flutter just because it’s just a lot quieter but again awesome video and thank you for that not a lot of people like to post stuff Vortech stuff specially on the racing ball valve which I do recommend as well but only if you can stand a really high pitch sound especially if you have to drive on the freeway for a while.
I wondering same thing. I have the race valve and it feels like its blowing off to much air at part throttle making car hesitate as it try's to figure out a/f
Angel Ortiz it was for me. The one that game with the kit wouldn’t flow enough air and was letting boost back out of the intake causing compressor surge
I had flutter on a cheap BOV went to a Tial 50mm and it solved it. But I HATED THE SOUND so I made a filter to go around it. It's cool when you open it up but around town its so annoying.
So I just got my paxton installed few weeks ago and I ordered the race bov today. I see you didn't have to remove the front bumper. Were you doing data logs because of the new bov? I talked to my tuner and they said a tune revision was not necessary
Hi I have a Paxton 3.6 pulley I have the stock blow off valve and it sound the one you had stock I'm guessing I have 10 or 11 pounds of boost not holding back power or something?
Coyote Crusader How much are you willing to sell it for ? Im located in california. I know it's on sale right now for 254 dollars at teambeefcakeracing.com
Cars and Stuff 30 minutes. I just turned the wheel to face inwards, popped the push pins out of the plastic fender well and it's accessible right through there. Kind of an awkward angle, but it can be done.
I have an F1-A pushing 18-20 psi I need to upgrade to the Mondo or Big Red BOV but I really like the sound of this valve. Ive been trying to get more info on it.
Is the air that you're blowing off post maf sensor? if so the maf has already calculated that air and adjusted fuel based on that air. So all that metered air needs to be recirculated back into the intake system post maf to keep the target a/f ratio. This is why the original race valve has the port for the air to go back into the system. If you dont recirculate that already metered air, but you instead blow it off to atmosphere as you are with the new BOV, then you will run rich when not in boost which is another issue itself.
WTF are people so F*cking concerned about how it Sounds??? And Not functionality? OH MAN IT SOUNDS GOOD. Let’s see the Dyno???? Before and after???? IT DOESN’T F*CKIN MATTER ABOUT ANYTHING BUT THE #’s
Trust me the noise never gets old. One of my favorite things about my car
Sounds like a bald eagle soaring through the sky...#MURICA!! Love it man!
Bald Eagles actually sound like seagulls so idk about that.
Now that’s the Blow off sound we all know and love🎶
This is definitely one of the better comparison videos. Good stuff man! Thumbs up!
Absolutely love it man! Can’t wait to install mine and hear that loud whoosh every time I get on it.
How do you feel about the MaxFLow BOV now? I have had it on for about 6 months here in Cali and low-key it is ridiculously loud lol. The sound reflect off everything, cars, sidewalks, walls, and it is so loud! lol sounds good but loud
your bov seems so much louder than this guys tho, i’m thinking about getting the max flow bov for my camaro because the stock bov is quiet
Love the sound doing research for boosting my s550 this year and this helps alot, i know a lot of people doing like that sound but i love it, previous car was an import an this kinda satisfies my desire.
chris gonzales I like the sound as well. It gets a lot of comments and they're all positive from the people who hear it in person
that actually sounds pretty cool
Michael Wiseguy I think so too. I'm really liking it right now
Nice video. I ended up changing my blow off valve on my 350 Z set up and it definitely makes a big difference and it is definitely a head turner and like you said it is extremely extremely loud and it’s definitely a head turner but out here in California it’s definitely a head turner for the cops to so I usually take it on and then put the old one back on because I can only take so much of it myself I think I only bought it back on when I’m doing shows or anything like that but for daily driving when I am driving it I go back to the original flutter just because it’s just a lot quieter but again awesome video and thank you for that not a lot of people like to post stuff Vortech stuff specially on the racing ball valve which I do recommend as well but only if you can stand a really high pitch sound especially if you have to drive on the freeway for a while.
I have the race bov on my 2018 Gt. I’m wondering if the tail 50mm would be louder
I have the stock one and went to 14 psi . so lund recommended to go with bv57 blowoff valve . after that I barley make 7-10 psi !!
Mine did good for 2 years ,now mine flutters whenever I go into boost and let off. Hows your holding up ,if you still have the car that is?
Just switched to this bypass valve, looking forward to hearing it.
98snakehorse how much boost is it good for?
Im running 16psi with no flutter currently
Near fort Bragg ?
Is it possible to run 2 of these?
i have a question if i put a stiffer spring in my bypass valve helps to increase boost? i think my bpv releases too much air more than it needs to be
I wondering same thing. I have the race valve and it feels like its blowing off to much air at part throttle making car hesitate as it try's to figure out a/f
@Richard Vaughn no shit. You cant buy different springs for the max flow.
Was it worth the purchase if you already have the max flow air re-cur one?
Angel Ortiz it was for me. The one that game with the kit wouldn’t flow enough air and was letting boost back out of the intake causing compressor surge
I had flutter on a cheap BOV went to a Tial 50mm and it solved it. But I HATED THE SOUND so I made a filter to go around it. It's cool when you open it up but around town its so annoying.
Why did you hate it?
Does changing the BOV change the way the car responds? Drivability, power?
Lmaooo you literally cant anymore American driving a mustang V8 and the Revs sounds like a Eagle cry of FREEDOM 2:52
So I just got my paxton installed few weeks ago and I ordered the race bov today. I see you didn't have to remove the front bumper. Were you doing data logs because of the new bov? I talked to my tuner and they said a tune revision was not necessary
Cars and Stuff you won't need a new tune. I had new rods and Pistons put in my car which is why I was datalogging
Never gets old lol I miss mine
Hi I have a Paxton 3.6 pulley I have the stock blow off valve and it sound the one you had stock I'm guessing I have 10 or 11 pounds of boost not holding back power or something?
Is that holding back power
What impeller speed do you run that the stock BPV is not enough?
What wheels are those?
Direct replacement for the bov in the vortech v3 si kit???
Yoshi5oh - yes. Direct replacement for Vortech/Paxton. I have an extra one, New in box if you’re in the market and want to save some money
Coyote Crusader How much are you willing to sell it for ? Im located in california. I know it's on sale right now for 254 dollars at teambeefcakeracing.com
Coyote Crusader My instagram is @yoshi_5oh if you wanna dm me.
Yoshi5oh - sent
Regular Guy Garage. Did you sell the extra BOV you had?
Does it make noise just cruising at highway speeds?
Andy34mn it's not really noticeable at highway speeds from inside the car.
Are you running a heritage gear set ?
Can i use this for a turbo kit like avo
Anthony Davis I honestly don't know. I'm sure it can be with a little fabrication if the flange is different
ah ic thanks fam
Great video
How long did the install take you?
Cars and Stuff 30 minutes. I just turned the wheel to face inwards, popped the push pins out of the plastic fender well and it's accessible right through there. Kind of an awkward angle, but it can be done.
What’s your avg mpg?
How much boost is the new BOV good for?
Let Ramos honestly I'm not sure. I'm seeing around 12psi right now with no issues
I have an F1-A pushing 18-20 psi I need to upgrade to the Mondo or Big Red BOV but I really like the sound of this valve. Ive been trying to get more info on it.
Let Ramos I don't think it enough to support an F-1A at that boost level to be honest
Sweet car! Love your rims!
Do you still have your old blow off valve
corey faltus no, I don’t have it
insanity. badass
Saw your posts on mustang6g! Worked my way here. Did you have knock issues?
Hellll yeaaaa.!! Sounds better than a turbo
Loooooove that sound
Is the air that you're blowing off post maf sensor? if so the maf has already calculated that air and adjusted fuel based on that air. So all that metered air needs to be recirculated back into the intake system post maf to keep the target a/f ratio. This is why the original race valve has the port for the air to go back into the system. If you dont recirculate that already metered air, but you instead blow it off to atmosphere as you are with the new BOV, then you will run rich when not in boost which is another issue itself.
n9pe it's located right off supercharger so pre maf. The original still vented to atmosphere it just had a filter over the outlet
@tripplefives1402you bent it back to the air filter side and it doesn’t bother anything.
Thanks
😎 sounds good
Sounds like a bald eagle fuck yea hahaha
Sounds like merica
WTF are people so F*cking concerned about how it Sounds??? And Not functionality?
OH MAN IT SOUNDS GOOD. Let’s see the Dyno???? Before and after????
IT DOESN’T F*CKIN MATTER ABOUT ANYTHING BUT THE #’s
GregMF Lmao a BOV doesn’t effect dyno numbers 🤣.
Can I get a coyote crusader sticker
Lion Vlogs sure!
Coyote Crusader Great sound bro,can't wait to supercharge my 17 premium!!
What pulley are you running on the pro charger?