You are amazing. I had the replacement lcd in my cart, just about to order and I thought: why not give it one more search. This was perfect and just saved me $. You’re what makes the internet great.
Omg. Thank you so much. I had this problem since Nov. 2020. I drove with my phone as a GPS speedometer since then. Always hat to guess my fuel capacity and mileage. I sent it in few years ago to a repair shop that wanted 320€ because it has a "broken processor". Gladly I declined. Thank you so much, again. You are a hero ♥️
Thanks dude, this did the trick for me !! You're a lifesaver. My son wants tot go on a ride tomorrow so I tried his MT07 to make sure it's running ok when this problem showed up.
UPDATE: OMG THIS F***ING WORKED!!! Please give me an email or PO Box so I can send you some gift cards or something as a thank you. You've saved me hundreds of dollars, it's the least I can do! I'm having the same issue with my MT-07 display. I'll try this tomorrow! Hope it works.
Nach 3 wochen probleme mit dem Tacho, mal ging er dann wieder nicht 😢😢. Aber bei mir hat es mit deiner Anleitung geklappt funktioniert ohne probleme 😊 danke dir
any tips as to where its located for first gen MT-09? mine is having the same issues and I would prefer to not spend an extra 300 bucks and deal with the DMV
@@ronilabajo3523 Well for me it was in the same spot as in this video 0:27 . Just press the spot where the cable bonds to the LCD in the front of the display on top of the black plastic strip. I fixed it by putting some plastic foam (like earplug or rolled tape) and screw the screen cover back tightly.
@@ronilabajo3523 It took couple of tries for me. The outside temperature seems to affect the contact (warm weather expands the material, cold weather shrinks)
Greetings from Sweden! Do you know which part# is used for the blue smd led high beam indicator (Fernlicht)? Mine burned out and I need to replace it. Thanks!
you just need to connect power to it. if you look to the connector of the dash. GND is most left on the lower row. 12V goes to pin5 and 6 counted from the left side, also lower row. If you don't send CAN Bus data it will show you ERR but for just testing something you can ignore it.
Thanks! It helped me for 18 months. Now is totally dead, no matter of pressure applied. Maybe a larger hammer will help. Now I have another dilemma: how to replicate ECU's odometer into display's memory?
Hab das selbe issue bei meiner mt125 aber da scheint das flachkabel gerissen zu sein. Gibts ne Möglichkeit sowas irgendwie zu reparieren? Einzelne Displays findet man nicht wirklich
Anyone find a solution? Mine flashes all the time riding. Seems to be affected by vibration and also giving me false oil and check engine light some times.
the ERR on the top left corner appears if the MCU is not sending data to the dash via the CAN bus. Maybe there is just a cable problem. If you look to the connector of the dash. can bus cables are third and fourth from the right (top row).
Sollte schon etwas druck drauf sein. Wieviel genau kann ich dir leider schlecht beschreiben. So schnell sollte der chip nicht kaputt gehen also keine Sorge :)
You are amazing. I had the replacement lcd in my cart, just about to order and I thought: why not give it one more search. This was perfect and just saved me $. You’re what makes the internet great.
Omg. Thank you so much. I had this problem since Nov. 2020. I drove with my phone as a GPS speedometer since then. Always hat to guess my fuel capacity and mileage.
I sent it in few years ago to a repair shop that wanted 320€ because it has a "broken processor". Gladly I declined. Thank you so much, again. You are a hero ♥️
Thanks dude, this did the trick for me !! You're a lifesaver. My son wants tot go on a ride tomorrow so I tried his MT07 to make sure it's running ok when this problem showed up.
Thank you so much! It helped me fix the issue and saved me money. I didn't even know this is a known production error. Thanks again!
Great help, simple video, hope more people will find it and avoid buying new speedometer.
UPDATE: OMG THIS F***ING WORKED!!!
Please give me an email or PO Box so I can send you some gift cards or something as a thank you. You've saved me hundreds of dollars, it's the least I can do!
I'm having the same issue with my MT-07 display. I'll try this tomorrow! Hope it works.
Nach 3 wochen probleme mit dem Tacho, mal ging er dann wieder nicht 😢😢. Aber bei mir hat es mit deiner Anleitung geklappt funktioniert ohne probleme 😊 danke dir
Thank you so much bro!!!! It did save me from a lot of trouble and money for the time being!!greetings from Greece
Wow, vielen Dank! Habe seit zwei Wochen Probleme mit dem Tacho und das hat soeben Abhilfe geschaffen. Bin gespannt, ob es auch hält. Danke!
Great tip, sorted my Tracer! Thanks very much for posting!!
OMG thanks man its working, I almost bought a new one which costs 700$, thanks again!!
Thanks so much. I just tried this and it fixed my MT09. 😁
Hat mir erstmal geholfen. Hab Hartschaum untergelegt. Mal schauen wie lange es hält. Danke dir!
Brilliant! Just brilliant.....was about to get it repaired or buy a new one.
I actually have this exact problem with MT-09 speedometer, the fix worked as well :)
any tips as to where its located for first gen MT-09? mine is having the same issues and I would prefer to not spend an extra 300 bucks and deal with the DMV
@@ronilabajo3523 Well for me it was in the same spot as in this video 0:27 . Just press the spot where the cable bonds to the LCD in the front of the display on top of the black plastic strip. I fixed it by putting some plastic foam (like earplug or rolled tape) and screw the screen cover back tightly.
@@ronilabajo3523 It took couple of tries for me. The outside temperature seems to affect the contact (warm weather expands the material, cold weather shrinks)
Danke für's Teilen!
Vielen Vielen Dank. Hat mir für den Moment 700€ erspart 😊 Hoffentlich hält der Radiergummi eine weile 😂
Amazing! Thanks.
Hi man, do you still make the dashboard for the xtz 750 ? I could be intersted.
Thank you 😊
I have the same issue with my yamaha xsr900 Display. Maybe I can use this trick for my display as well.
👍🏼👍🏼 very good sharing
Greetings from Sweden! Do you know which part# is used for the blue smd led high beam indicator (Fernlicht)? Mine burned out and I need to replace it. Thanks!
do you have information about on table wire connection ?
Show!! Top!
Triumph dash board How to disassemble tigger 1200?? Tanks!
I wasn’t lucky but thanks for the advice
do you know where to find spare part for the meter case? I broke the front glass and cant find anywhere to buy ittt please help mee :(
Hi Stev,
bietest du noch die Reparatur von MT07 Tachos an? Natürlich gegen Bezahlung.
Liebe Grüße
Daniel
Vc tem esquema elétrico do painel mt 07
Hi!
Could please share some details which pins u use to run display without motorcycle?
Thanks
you just need to connect power to it.
if you look to the connector of the dash.
GND is most left on the lower row. 12V goes to pin5 and 6 counted from the left side, also lower row.
If you don't send CAN Bus data it will show you ERR but for just testing something you can ignore it.
Thanks! It helped me for 18 months.
Now is totally dead, no matter of pressure applied.
Maybe a larger hammer will help.
Now I have another dilemma: how to replicate ECU's odometer into display's memory?
Change out the white panel thats what holds the info
Hab das selbe issue bei meiner mt125 aber da scheint das flachkabel gerissen zu sein. Gibts ne Möglichkeit sowas irgendwie zu reparieren? Einzelne Displays findet man nicht wirklich
Do you happen to know how to fix the backlight issue? My cluster reads fine but the backlight intermittently quits so it makes the cluster dark.
I'm having the same issue with my MT-07 display - backlight. How to fix?
Anyone find a solution? Mine flashes all the time riding. Seems to be affected by vibration and also giving me false oil and check engine light some times.
Same issue my backlight went out has anyone tried the ruber,? Vibration definitely affects it so im thinking something loose
have an issue with "ERR" comig up where the clock suppoesd to be. you havent seen this before and maybe a fix for it??
the ERR on the top left corner appears if the MCU is not sending data to the dash via the CAN bus. Maybe there is just a cable problem.
If you look to the connector of the dash. can bus cables are third and fourth from the right (top row).
@@stromcraft6740 thanx for the help. Was able to se the bus feedthrough in diffrent signals on both wires. That leaves the display...
Does this also works when the background light is flickering?
i dont think so.
No it doesn’t 😂
These units are such bollocks. My second one has just died due to moisture in the unit
heyi had to buy ome to, but gotta second hand one bit wrong millage ho do I reset it??
Ist es egal wie dick man das Stück dazwischen macht, oder besteht die Gefahr, dass man es zu dick macht wodurch der Sensor kaputt gehen könnte?
Sollte schon etwas druck drauf sein. Wieviel genau kann ich dir leider schlecht beschreiben. So schnell sollte der chip nicht kaputt gehen also keine Sorge :)
@@stromcraft6740 ok 1000 Dank