How to Replace Thermostat Housing 01-05 BMW 325Xi
Вставка
- Опубліковано 2 жов 2024
- Buy Now!
New Thermostat with Housing Assembly from 1AAuto.com 1aau.to/ia/1AEM...
In this video, 1A Auto shows how to remove, install, or replace a leaking or malfunctioning thermostat housing assembly. The video is applicable to the 01, 02, 03, 04, 05, BMW 325Xi and similar 3 series vehicles.
This process should be similar on the following vehicles:
2001 BMW 325Xi
2002 BMW 325Xi
2003 BMW 325Xi
2004 BMW 325Xi
2005 BMW 325Xi
2006 BMW 325Xi
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ou8/1AX...
• 10mm Socket 1aau.to/orB/1AX...
• 13mm Socket 1aau.to/ouT/1AX...
• 22mm Socket 1aau.to/obq/1AX...
• Fan Clutch Wrench
• Trim Tool Set 1aau.to/ogE/1AX...
• Side Cutters
• T25 Socket 1aau.to/od6/1AX...
• Ratchet 1aau.to/owD/1AX...
• Socket Extensions 1aau.to/ouT/1AX...
• Torque Wrench 1aau.to/onW/1AX...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/odp/1AX...
• Pipe Thread Sealer
• Drain Pan 1aau.to/ocB/1AX...
• Funnel 1aau.to/oag/1AX...
• Pick 1aau.to/oej/1AX...
• Razor Blade / Gasket Scraper 1aau.to/oay/1AX...
Subscribe: / @1aauto
Check out our playlist:
BMW 325Xi 1997-2006 4th Gen: • BMW 325Xi 1997-2006 4t...
For More Info visit us at 1aau.to/h/bMB/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
some of the steps are not necessary, like removing the coolant reservoir hose on both sides, the thermostat side will do, the coolant temp sensor with the lower radiator hose ? why ? Again, the thermostat side will do. The air filter housing ? why ? All these pointless steps lead to unnecessary wear of the parts by connecting/disconnecting them for no reason what so ever.
Great videos, which led me to buying their products. This mechanic does an exceptional job explaining each step, consistently, in every video
The wrench used to remove the fan clutch you called it “the tool” do you have the actual name or link for it?
Fan clutch wrench. They usually sell them in sets
Question if after doing thermostat and water pump, you don’t have any heat anymore?
I don't like the way he takes the negative off cuz if it touches and metal and grounds it makes a connection it won't do nun but still and btw u don't need to disconnect battery to change the housing
I did everything you showed but when I put it back together the car runs funny and the water comes out from the cap and the vent screw. What did I do wrong
+Cenovio Gonzalez We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You did too many extra unneeded moves
DO NOT REMOVE THE BLACK RADIATOR JUST TAKE OUT THE BLUE PIECE IN THE CENTER
+Will Carson We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.
97°should be?
Queeee?
Show a 2010 repair
+William Spence We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c