Mate, you're a lifesaver. I was *this* close to buying a new console until I saw this video and found out my power brick is stuffed. I shall get back to you when I order a new one and it arrives so I can tell you if it worked or not.
i bought a new brick from gamestop and i regret it cuz gamestop cheats u so it’s either it doesn’t work or gamestop scammed me as usual the brick had the red light and my xbox still had it ;(
Had a Falcon revision 360 in 2008 that was able to display the 4-light Ring. Doesn't really matter if the console has HDMI or not - what matters is if the console's default video output is via the AV port (aka you don't use HDMI for anything). If you use HDMI for video, then yeah, you should never get the 4 red lights even if the AV cable is being used for audio.
Had the three lights on mine... Had no idea what was wrong until you mentioned the power supply light being green. I never noticed it... Mine was orange when I checked it after watching... New power supply on the way. Thanks.
in his case, its the power supply. Because the tray wont open, that means its not getting power,and if any other parts were messed up it would still have power.
Correction to know. Orange doesn't mean a problem on your brick, it means it is on standby mode, which is that the console isn't on, so it isn't a problem..
WOW you sir get a like! I just recently decided to get my old 360 out and it started Red ringing. I knew it had to do with the old power brick but I was afraid it was completely bad. After going through NUMEROUS videos and searching for replacement videos online I come across yours. Turns out the connection is just loose between the xbox and power brick and so when I held it into the xbox when powering on it worked fine and continued to do so! I wish I could give a super like or something for you actually knowing what your talking about! Thanks a lot sir!!!
you're such a smart kid. I was having a 4 ring of death and the issue was my power cords not plug in completely. I almost throw away my xbox360. Thanks for this video tutorial.
I just knew that this channel is the one that I needed to summon in order to fix the RROD ( red ring of death ) of my xbox 360. Thank you sooooooooooooooooooooooo much 👊🙋🙋🙋🙋🙋🙋😎
If you have a retro xbox 360 (AV only), and you get the 4 red lights, you need to check the connection. The inside of the AV adapter might be broken. The way I fixed it, I just unplugged it and plugged it back in. If this doesn't work, try the hammer method because it can also mean your Xbox is bricked.
Thanks for the video, I had the three fields RROD and a red light on the power supply. Got the 0-0-0-1 code and tried with a different power supply that I borrowed from a friend. First try - same thing, second - also same thing. On the third try however it booted just fine, then I tried it again with my original power supply and now that works too. So now I don't know what to think, but I'm glad it works.
Thought my xbox was a paper weight. I never thought to look at the power supply since it did turn on. Saw the red light and bought a new. It now works. Thanks!
Thank you so much, my console red ringed today and I got really scared. I watched multiple videos trying to fix and nothing was working. Thanks to your video I realized that the power bar was the problem! I am so grateful for that. Thanks a million
Watching for the fun of it. My Xbox froze so many times yet I never got a red ring. I thought I would each time but when I turn it off and back on it normally starts up lol
it does make sense cause the pins get dirty and may need cleaning with contact cleaner the power pins are cheap as well the plug needs to be seated tight
Also common misinformations I keep seeing are that rrod related to gpu (e74 or 1022)is caused by heat inside unit or since ms did not make X-Clamps press heatsink way it squeezes graphic chip. It is not. If very lucky it is caused by bad av cable. If it's gpu related then it is caused by cheap low quality lead free solder used on early xbox 360 models and it was heat and cooldown cycles that caused it to come loose evetually not overheating. Seen same happen on phat ps3 and some older desktop/laptop graphic cards. For it only good fix is get chip reballed by professional or proper reflow. Towel or fan jamming trick is not reflow and it works by warping mainboard and making temporaly contact and also causes permanent unfixable damage to mainboard. Replacing X-Clamp with bolts will temporary fix cracked bga connection but also causes board to warp and risk for gpu to crack. So better not believe or try online tricks to fix e74 caused by graphic chip and better rather take it to professional for repairs.
The reason that the power failure occurs is because on the power cord there is 6 pins and there is a 12V 16A rail, 5V 1A rail, and the two last pins are used for signaling the power supply to turn on I think that when you loosen the connections from the power cord the pins that signal the power supply to turn on get disconnected, causing the power supply to shut one of the two rails off and disconnecting power from the disk drive, etc and that is why the power light starts blinking because if the DVD drive is dead the power light blinks (sometimes) Sorry if this is long
I’ve had an Xbox 360 for 11 years now and it red ringed like this. I just checked this video and this prevented me from having a f***ing heart attack. Thx so much!
I am sitting here at 2am wondering if I could get my old xbox to work and I find you. I have yet to try your method but I will edit this to say if it works
this shit cause because MS done a poor job soldering the heat-sink properly. they done a awful job. i sometime think all those 80 million xbox 360 they were bragging about selling Xbox 360 lifetime, i think 40% or even more were us buying two or three xbox 360 for this shit. i just power on my Xbox 360 today n that shit showing me red ring of death now. that means i have to manually open it n fix it myself. it will cost me 50$ n lot of work. Buying the paste n cleaning the whole console n putting it back together n hoping it will work. this is a really difficult job. its not like PS4 which is really simple. playing for 4 years the fan was making huge noise, i just clean up couple of days back just for those noisy fan sound. if u hearing fan sound n overheat for PS4, dont worry. buy Arctic Cold or MX5 thermal paste n follow ifixit.com, its a really easy process. the fan sound will be gone if u do something clever. just think what will make those fan sound go away. take the fan out clean it thoroughly then put some ... using a syringe. After i done that my PS4 using sound meter showing 40DB. this is my trick.
thanks for that video, which actually made me fix my console, it had a red light on the power brick for about a year and after plugging it out and back in its working now, thanks!
thanks for the good video bro makes the red ring seem less terrifying. waiting for an auction 360 to arrive and a 2nd hand power supply. preparing myself for a red ring
It's not the model number or version of the dvd drive the motherboard on the dvd drive is married to the board of that specific xbox so you would have to swap the motherboard with the new one
Great tip about the power brick staying orange when the console is turned on means it's bad. Thought my Resident Evil 360 had gone bad even though it hadn't be used in a long time. Hopefully a new power brick will get it working.
I still see a LOT of misinformation on this issue, I have "repaired" a LOT of 360 hardware when the console was still relevant. There is absolutely no fix. Only measures you can take to extend its life, a re-ball will by far last the longest, maybe a year or two, but eventually, every Xbox 360 manufactured before 2009 will suffer a catastrophic CPU or GPU failure. Preventative measures such as mounting a heatsink fan or altering the X-clamp setup can help. But this issue is created by a design flaw with the chips used. Originally was thought to be caused by heat, but it wasn't, the issue was caused by the type of BGA used. It doesn't like getting hot, then cold repeatedly, it results in cracks in the solder. This is why applying heat by either wrapping it in a towel or using a heat gun directly on the affected chip appeared to fix the issue. For collectors who want an original "fat" 360, the "Jasper" board revision is the one you want, by this point in 2009, Microsoft had fully solved this issue
Agreed. All my jaspers are still going strong. Falcons are okay in a pinch, but definitely stay away from Xenon and Zephyr boards, though I do have a Zephyr that's good, but it,nevrr gets used
Really the only fix for a gpu issue it to swap the gpu. Also, overheating the console does not reflow the solder, the console will not get hot enough to melt the lead free solder and even if you could I'd kill your xbox. The problem is the underfill. And late falcons are also reliable
I removed the hard drive last night when my console did this, but it didn’t seem to have any effect. I left it unplugged until I could get back to it today, and removed the hard drive again and the console booted. Powered it down, reattached hard drive and booted fine! Which is strange because my power supply was doing exactly what a faulty power supply would do. Glad I didn’t buy that one on eBay!
sorry about this but your xbox might have some components fried if it wasn't in a power surge protecter... soooooo yeaaaa ask somebody for a replace or something I guess
Xbox 360 they can put red wing if they if they get ring Wings they might die the battery if it if it don't works then try to unplug your things then if you turn it on again it will not come red ring but when you do a video about that then it will get rid of ring and the man was doing Red Wings but don't put Red Wings it will my dog battery for every a lot lot lot lot times then when you turn it off
Back in 2014 my Xbox 360 red ringed. The power supply light was red- but I didn't understand what that meant at the time so I replaced the whole console.
I've got a 2008 hdmi falcon model that I bought online for £4 and a couple quid postage. I think the previous owner didn't plug it in properly and didn't check the code. I remember it it arrived and I tested it and the system worked first time and it has never got rrod just the plug issue. I got it almost 3 years ago. Still works
I was playing forza horizon, then it suddenly freezed then crashed leaving my tv screen blank, I look on the xbox and it has the 3 red lights. We tried what you said, but the ring seems to not go away. What to do? 😇
This video is designed to help diagnose the issue, and what is causing the RRoD. If the error code leaves you with a hardware issue on the console itself, then you'd have to do your research as to how to repair or replace the system.
It's actually good that the 360 has it where it will show the rrod cause on my ps1, if the connection is loose, it won't do anything and makes me fear that it actually broke down when it didnt
Thanks dude! I followed all the steps and was able to revive a 2006 phat xbox I got for free from a friend that just bought a new one after the RROD. The only difference was that i removed the xclamps and used a screw and washer repair kit i bought years ago
Manny Castillo no problem! Glad I could help! Plus 360 games are dirt cheap now so for pretty much the price of 1 new game and you got a full collection! Enjoy!
Hey man, could you help me out? I pressed the sync and the eject button three times, but instead of having 1 flashing red ring, it had 3 flashing red rings. Does this still mean that the power supply is messed up or is the system toasted? Thanks :)
I have never had the RRoD on my 360, or anything like that... But I have had my controller (white) go into (i guess) the RRoD, none of the lights were green on my controller, instead all 4 were red, but then I took out the battery and put it back in and I've never had that problem again... If I had screen shots of it I would of shown proof of it, but since I was like 8 or 9 at the time and I didn't have a phone or camera, I don't have any proof of it happening.
Thanks I got one out of the dump when I went in to the Electronics Ben I seen a Xbox 360 and the control for it was there and the and the chords for it was there and there was was to games for it one was in the case and the other one was in the Xbox I popped the front off and stuck. a paper clip in a hole to open it it and the game was in it the power brick has a Orange light on it now I can buy a new one for it and I can use or sale it
3 rings and 0001 code can be also caused by blown caps like in one of my consoles. PSU is good, i checked it on another console and it worked without any problems
bro, thank you so much, i was just about to get rid of my xbox 360 because of the red ring of death, but it just turned out that it was a problem with the power brick and not the console itself. thank you, your a lifesaver.
I have never got the RRoD. However, my Xbox 360 has been acting weird, so I feel like I may get it soon. Edit: After watching this bid, I thought hmm, I am gonna play Xbox 36p now. And I turn it on to find those STUPID 3 red lights. Right after I said I was probably gonna get it soon. Edit 2: I watched this, got the code, and found out my Xbox had a circuit board malfunction that caused the system to red ring. Luckly I was able to get it fixed. But the console STILL gave me 3 red lights. WHY!! Edit 3: Ok, my 2nd RRoD was a completely busted power supply unit. I replaced it. Then power it on but have me 1 red light. Should I just buy a new Xbox? Edit 4: Ok, RRoD 3 was caused by a disk drive error. A part of a disk get stuck in the drive, causing my RRoD 3. Now I turned it on, and...... WORKING AGAIN. However, I lost some apps (circuit board fix caused this, I think). The total cost: only $348.59. Total time: About 2 weeks.
You can also learn this too by reading the manual for the system it looks like he did good on you laddie because he’s exactly right but I never understood the code thing at all
I much preferred the design of the og Xbox too 360 the one over the og and now that I’ve got an x the x over all 3 previous systems what I really like is how the x reminds me of a computer tower
The power brick thing isn't quite right. If there is a power problem in the console (e.g. capacitors, mosfets,...) the power brick will also turn orange 😉
1 red light: E74 2 red lights: Over Heating 3 red lights: General Hardware Fail 4 red lights: AV Cable is unplugged I tried to match the amount of rings to the amount of words I put.
I own one of the Xbox 360 slim models and it doesnt even overheat. It, at max temp, goes up to about 80 degrees. I usually have a fan setup to keep it cool anyways.
Dude just put it away in a closet and spend a couple bucks on a newer model. That old model is a useless pile. You have more financial leverage owning a 12 pack of quilted toilet paper.
Intellitech Studios man can you help me... I have 3 flashing red lights (rrod) and one green(at the center) but sometimes console works perfect and sometimes have 3 red lights. Its not the power supply and I think its cooling and I think to get more faster fans for more cooling. It is good idea?
Hi. I have a fat Xbox 360 (arcade version with a 20GB HDD and no HDMI) which I didn't use for some years because I also have a Xbox360 slim with a Kinect sensor. So, some weeks ago I tried to connect the fat Xbox which was fine when I put it away, and I got the 3 RRODs! I already opened the console and thought I would need to heat the chipsets but now I think that the problem might be with the power suply. If I press eject with the console off, the tray doesn't open. The fans start to move but stop less than a second after. Same thing if I power on the console with power button. The led in the power supply is fixed yellow all the time. I can't remember if it should be green after the console being turned on. Are there any repairs for power supply? Or should I get a used one? Do you think that the power supply is causing my 2 RRODs? Regards.
I forgot to say that the power supply lights green for a second but as fans stop and 3 ROD blinks it goes orange again. It is green for less than a second. Only if I had a friend who could borrow a power supply... But all of them already sold the fat xboxs. The only ones still with xbox 360 have Slims....
Fun fact: The console can RROD when the power supply is fully plugged in and in stand by. It happens when the 360 can't generate its internal power rails before it tells the power supply to turn on.
Tek that was because you got the xbox 360 that had the oldest models. New models are well taken care of and don't have any glitches now, when the ps4 might encounter a blue screen/ pulse of death and also much more. some disks are sometimes not read (probably).
Hey, do you know why my xbox 360 still sounds like a jet engine after cleaning it out? It's strange. It also doesn't make sense that mine has never red ringed. It's the original too.
Video was helpful, thanks I have red ring, I did what you did to get the code. 2 of the lights came on for the code. I know you mentioned overheating with 2 red lights. By any chance do you have any recommendations on what I can do to fix it. Thank you
Ok I'm missing something when your doing the diagnosis. You push the sync button & the eject button in order to start the sequence of giving you the code, but what are you pressing off camera, to switch from one digit (or whatever) of the code to the next? The code seems to be 4 "digits or characters" long, what are you pressing to get from one to the next please?
My Xbox 360 slim Black version has red ring all over turn on button... I try do this method but i fail... Please help me, I really need it.... And my power brick colour is orrange... First time i do this method it work but the display is not working...second time it goes like this..... please help
For 3 years I couldnt get my xbox to work all i had to do was plug it into a different outlet THANK YOU!!!!!!
Are you serious
1 like = 1 yay for him
(I left a like)
Sgt.peeps I couldn’t get mine for 2 years :(
Sgt.peeps aww man bro f in chat guys
F
Mate, you're a lifesaver. I was *this* close to buying a new console until I saw this video and found out my power brick is stuffed. I shall get back to you when I order a new one and it arrives so I can tell you if it worked or not.
Did it work :p
:p
I guess it didn't work oops
Top 10 internet mysteries
i bought a new brick from gamestop and i regret it cuz gamestop cheats u so it’s either it doesn’t work or gamestop scammed me as usual the brick had the red light and my xbox still had it ;(
4:35 - It wouldn't matter. The DVD drive is keyed to the board. Make/model doesn't matter.
Will an Xbox start up without it? Will it still red ring? I’m getting an elite and I want to know.
@SimOFFICIAL Wrong, I have done it like 30 times and I am still not banned lol
Had a Falcon revision 360 in 2008 that was able to display the 4-light Ring. Doesn't really matter if the console has HDMI or not - what matters is if the console's default video output is via the AV port (aka you don't use HDMI for anything). If you use HDMI for video, then yeah, you should never get the 4 red lights even if the AV cable is being used for audio.
my default video output is av, but i use HDMI and still got 4 light ring.
A four ring on a Falcon should be impossible, Microsoft removed that feature after Xenon
Had the three lights on mine... Had no idea what was wrong until you mentioned the power supply light being green. I never noticed it... Mine was orange when I checked it after watching... New power supply on the way. Thanks.
MrRyansl same here for me power supply bad but it works till I get a new one
My working 360 has orange light on psu so not sure that info is accurate.
+Mike Clarke the psu is always orange when the console is off, if it's on with the orange light is where the problem is
Well that's really useful for diagnostics when the console won't turn on, good job microsoft no wonder they lose billions every console they release.
Mike Clarke yep XD
in his case, its the power supply. Because the tray wont open, that means its not getting power,and if any other parts were messed up it would still have power.
Correction to know. Orange doesn't mean a problem on your brick, it means it is on standby mode, which is that the console isn't on, so it isn't a problem..
WOW you sir get a like! I just recently decided to get my old 360 out and it started Red ringing. I knew it had to do with the old power brick but I was afraid it was completely bad. After going through NUMEROUS videos and searching for replacement videos online I come across yours. Turns out the connection is just loose between the xbox and power brick and so when I held it into the xbox when powering on it worked fine and continued to do so! I wish I could give a super like or something for you actually knowing what your talking about! Thanks a lot sir!!!
Thank you for the feedback! Glad I could help!
Лол эйемону 2 жилые подключаю показать от начальника знал когда я б еще и звук ты дебил мной когда пишет более понятно
where did you buy the power brink? i have been trying to replace my old power suppl.
@@IntellitechStudiosI Have A White Xbox 360 From March Of 2006 And It Never Red Ringed.
you're such a smart kid. I was having a 4 ring of death and the issue was my power cords not plug in completely. I almost throw away my xbox360. Thanks for this video tutorial.
Ya he's a smart kid
@@abigailadams8502 ikr so smart
I just knew that this channel is the one that I needed to summon in order to fix the RROD ( red ring of death ) of my xbox 360. Thank you sooooooooooooooooooooooo much 👊🙋🙋🙋🙋🙋🙋😎
If you have a retro xbox 360 (AV only), and you get the 4 red lights, you need to check the connection. The inside of the AV adapter might be broken. The way I fixed it, I just unplugged it and plugged it back in. If this doesn't work, try the hammer method because it can also mean your Xbox is bricked.
0:37 this is one of the funniest RRoD reactions i've ever seen
Lol
Hhhhppprcfg1u89b. G89iohdutjsohmboijch1
Welp, I have a 0102 error. Guess it's sledgehammer time.
You could also apply new thermal compound, but that works too
Intellitech Studios can you diagnose the RROD on Xbox 360 E?
It can be fixed.
LMAO
@@TheGoldNShadow yeah you can
Thanks for the video, I had the three fields RROD and a red light on the power supply. Got the 0-0-0-1 code and tried with a different power supply that I borrowed from a friend. First try - same thing, second - also same thing. On the third try however it booted just fine, then I tried it again with my original power supply and now that works too. So now I don't know what to think, but I'm glad it works.
You legend. Triggering a “power failure” got it in the same state which let me reset normally. My Xbox lives!!!
Thought my xbox was a paper weight. I never thought to look at the power supply since it did turn on. Saw the red light and bought a new. It now works. Thanks!
I experimented my two xbox with the red ring of death and I conclude that the hard drive is the one that's broken thank you for this
Thank you so much, my console red ringed today and I got really scared. I watched multiple videos trying to fix and nothing was working. Thanks to your video I realized that the power bar was the problem! I am so grateful for that. Thanks a million
Watching for the fun of it. My Xbox froze so many times yet I never got a red ring. I thought I would each time but when I turn it off and back on it normally starts up lol
Thank you so much, you saved me from having to get rid of my first xbox I got at the age of 9. I'll be sure to subscribe for this one.
Thanks to you, I brought my old 360 back from the dead. For whatever reason, doing the sync and eject forced it to turn on.
ǝɔᴉu
Had my xbox for 8 or so years now, Still works! i love that thing with all my heart.
Me too
it does make sense cause the pins get dirty and may need cleaning with contact cleaner the power pins are cheap as well the plug needs to be seated tight
Correct in a way.
Same applies for 360 slim consoles.
Where as if something is incorrectly installed it will read error
Also common misinformations I keep seeing are that rrod related to gpu (e74 or 1022)is caused by heat inside unit or since ms did not make X-Clamps press heatsink way it squeezes graphic chip. It is not. If very lucky it is caused by bad av cable. If it's gpu related then it is caused by cheap low quality lead free solder used on early xbox 360 models and it was heat and cooldown cycles that caused it to come loose evetually not overheating. Seen same happen on phat ps3 and some older desktop/laptop graphic cards. For it only good fix is get chip reballed by professional or proper reflow. Towel or fan jamming trick is not reflow and it works by warping mainboard and making temporaly contact and also causes permanent unfixable damage to mainboard. Replacing X-Clamp with bolts will temporary fix cracked bga connection but also causes board to warp and risk for gpu to crack. So better not believe or try online tricks to fix e74 caused by graphic chip and better rather take it to professional for repairs.
Not true. The cause of the red ring is flip chip failure because of the wrong underfill being used, not the solder
The reason that the power failure occurs is because on the power cord there is 6 pins and there is a 12V 16A rail, 5V 1A rail, and the two last pins are used for signaling the power supply to turn on
I think that when you loosen the connections from the power cord the pins that signal the power supply to turn on get disconnected, causing the power supply to shut one of the two rails off and disconnecting power from the disk drive, etc and that is why the power light starts blinking because if the DVD drive is dead the power light blinks (sometimes)
Sorry if this is long
Thank you very much! Fixed my xbox 360 and I am very happy! Best tutorial on YT!
I’ve had an Xbox 360 for 11 years now and it red ringed like this. I just checked this video and this prevented me from having a f***ing heart attack. Thx so much!
I am sitting here at 2am wondering if I could get my old xbox to work and I find you. I have yet to try your method but I will edit this to say if it works
well?
It didn't work, rip.
Your gone
first i thought when i got it i thought it was going to blow up
speaking of which, check out my Galaxy Note7 review! ^w^
That is caused by overheating
this shit cause because MS done a poor job soldering the heat-sink properly. they done a awful job. i sometime think all those 80 million xbox 360 they were bragging about selling Xbox 360 lifetime, i think 40% or even more were us buying two or three xbox 360 for this shit.
i just power on my Xbox 360 today n that shit showing me red ring of death now. that means i have to manually open it n fix it myself. it will cost me 50$ n lot of work. Buying the paste n cleaning the whole console n putting it back together n hoping it will work. this is a really difficult job. its not like PS4 which is really simple. playing for 4 years the fan was making huge noise, i just clean up couple of days back just for those noisy fan sound. if u hearing fan sound n overheat for PS4, dont worry. buy Arctic Cold or MX5 thermal paste n follow ifixit.com, its a really easy process. the fan sound will be gone if u do something clever. just think what will make those fan sound go away. take the fan out clean it thoroughly then put some ... using a syringe. After i done that my PS4 using sound meter showing 40DB. this is my trick.
Intellitech Studios 😊😏😁
Same
My xbox flashes red lights.
I turn it on.
It turns green
Then it flashes red 8-10 times.
Then shuts off.
Orange battery.
thanks for that video, which actually made me fix my console, it had a red light on the power brick for about a year and after plugging it out and back in its working now, thanks!
You man deserve a pet goldfish!! And a mystery flavor Mountain Dew!! You know exactly what you are doing!!
Love this video!!!!
thanks for the good video bro makes the red ring seem less terrifying. waiting for an auction 360 to arrive and a 2nd hand power supply. preparing myself for a red ring
It's not the model number or version of the dvd drive the motherboard on the dvd drive is married to the board of that specific xbox so you would have to swap the motherboard with the new one
Great tip about the power brick staying orange when the console is turned on means it's bad. Thought my Resident Evil 360 had gone bad even though it hadn't be used in a long time. Hopefully a new power brick will get it working.
Just got 1 got a orange light but when dose powered up I get a screeching noise
The only time it did that is when I smacked it when it kept freezing on black ops 2 and it still works
I still see a LOT of misinformation on this issue, I have "repaired" a LOT of 360 hardware when the console was still relevant.
There is absolutely no fix.
Only measures you can take to extend its life, a re-ball will by far last the longest, maybe a year or two, but eventually, every Xbox 360 manufactured before 2009 will suffer a catastrophic CPU or GPU failure. Preventative measures such as mounting a heatsink fan or altering the X-clamp setup can help. But this issue is created by a design flaw with the chips used. Originally was thought to be caused by heat, but it wasn't, the issue was caused by the type of BGA used. It doesn't like getting hot, then cold repeatedly, it results in cracks in the solder. This is why applying heat by either wrapping it in a towel or using a heat gun directly on the affected chip appeared to fix the issue.
For collectors who want an original "fat" 360, the "Jasper" board revision is the one you want, by this point in 2009, Microsoft had fully solved this issue
Agreed. All my jaspers are still going strong. Falcons are okay in a pinch, but definitely stay away from Xenon and Zephyr boards, though I do have a Zephyr that's good, but it,nevrr gets used
Really the only fix for a gpu issue it to swap the gpu. Also, overheating the console does not reflow the solder, the console will not get hot enough to melt the lead free solder and even if you could I'd kill your xbox. The problem is the underfill. And late falcons are also reliable
I removed the hard drive last night when my console did this, but it didn’t seem to have any effect. I left it unplugged until I could get back to it today, and removed the hard drive again and the console booted. Powered it down, reattached hard drive and booted fine! Which is strange because my power supply was doing exactly what a faulty power supply would do. Glad I didn’t buy that one on eBay!
Saved my evening, dude!!! Great video!!!
My Xbox just turned off while I was playing, and it went to the Red Ring of Death. It turns out it was a power surge.
sorry about this but your xbox might have some components fried if it wasn't in a power surge protecter... soooooo yeaaaa ask somebody for a replace or something I guess
that happend to me on a jasper then i just unpluged it and pliged it back in and its working fine.
DUDE THANK YOU SO MUCH I THOUGHT I HAD TO BUY A WHOLE NEW DRIVE AND A WHOLE NEW BOX BRO IT WAS JUST THE CABLES THANK YOU
tried starting up my xbox but it had 3 red lights, the 'brick' is showing red so now atleast I know what the problem is.
Thanks for the video.
Same problem
What’s the difference between the red or orange light?
I am still struggling with red ring.. Any advice for me... I have even opened and cleaned the box but still showing red ring
Mine has an issue when after a certain amount of time it freezes, no red ring, and when I shut it off and turn it on it boots up 5
Dude, you literally saved my ass, thank you so much, and god bless you
I have no idea why this was in my recommended, but I’m not disappointed in the slightest
Thanks I found out that my x clamps weren’t tight enough and now it working 😃
Anna Ortega 👍
Zyrcle x clamps?
@@TheGoldNShadow x clamps are basically holders for the heatsinks of the gpu and cpu
When it comes to overheating the thermal paste might have gone bad and you might need to open it up to apply new thermal paste to it like mine
I think I am kind of lucky,I have a original Xbox 360 made 2009 and a Slim made 2011 and NEVER had the RROD
Hylian Link In the Castlez indeed
I have always Feared the RROD but I liked the video so I one gets the RROD I can come back to this video.
Xbox 36
Xbox 360
Xbox 360 they can put red wing if they if they get ring Wings they might die the battery if it if it don't works then try to unplug your things then if you turn it on again it will not come red ring but when you do a video about that then it will get rid of ring and the man was doing Red Wings but don't put Red Wings it will my dog battery for every a lot lot lot lot times then when you turn it off
My puppy died today bro, on top of all the shit thats happened today ive at least found joy in your teaching. thank you very much.
Easy RRoD fix: Get a PlayStation
I'm jk, I like both.
OOOO this wor- *ps3 shows yellow light*
Back in 2014 my Xbox 360 red ringed. The power supply light was red- but I didn't understand what that meant at the time so I replaced the whole console.
this guy is brave and smart
I've got a 2008 hdmi falcon model that I bought online for £4 and a couple quid postage. I think the previous owner didn't plug it in properly and didn't check the code. I remember it it arrived and I tested it and the system worked first time and it has never got rrod just the plug issue. I got it almost 3 years ago. Still works
Thank you for making this video, I got a refurbished original xbox and I'm definitely using this guide just incase it happens
i bought a broken phat 360, it's exciting to watch videos like this.
I was playing forza horizon, then it suddenly freezed then crashed leaving my tv screen blank, I look on the xbox and it has the 3 red lights. We tried what you said, but the ring seems to not go away. What to do? 😇
This video is designed to help diagnose the issue, and what is causing the RRoD. If the error code leaves you with a hardware issue on the console itself, then you'd have to do your research as to how to repair or replace the system.
Intellitech Studios, Thank you very much bro! 🤟🏻
@FordTaurusfan 2020 U need somebody with a reflow or reball station.
@@IntellitechStudioswhere do you read the code please ? Thanks
Sometimes when it rrods a temp fix is to push on the bottom in the middle where the GPU and CPU is while booting it, it may work
@8:03 I don't have that sync button on mine, and it's the newer one with HDMI
you got the slim dont you
It's actually good that the 360 has it where it will show the rrod cause on my ps1, if the connection is loose, it won't do anything and makes me fear that it actually broke down when it didnt
Thanks dude! I followed all the steps and was able to revive a 2006 phat xbox I got for free from a friend that just bought a new one after the RROD. The only difference was that i removed the xclamps and used a screw and washer repair kit i bought years ago
Manny Castillo no problem! Glad I could help! Plus 360 games are dirt cheap now so for pretty much the price of 1 new game and you got a full collection! Enjoy!
The bolt mod isn’t a real fix
This video needs to be at the top of the search results
It is
Hey man, could you help me out? I pressed the sync and the eject button three times, but instead of having 1 flashing red ring, it had 3 flashing red rings. Does this still mean that the power supply is messed up or is the system toasted? Thanks :)
The code that you get will tell you the issue
I have never had the RRoD on my 360, or anything like that... But I have had my controller (white) go into (i guess) the RRoD, none of the lights were green on my controller, instead all 4 were red, but then I took out the battery and put it back in and I've never had that problem again... If I had screen shots of it I would of shown proof of it, but since I was like 8 or 9 at the time and I didn't have a phone or camera, I don't have any proof of it happening.
Thanks I got one out of the dump when I went in to the Electronics Ben I seen a Xbox 360 and the control for it was there and the and the chords for it was there and there was was to games for it one was in the case and the other one was in the Xbox I popped the front off and stuck. a paper clip in a hole to open it it and the game was in it the power brick has a Orange light on it now I can buy a new one for it and I can use or sale it
Nice!
thanks this is the only video of many that was actually helpful. it was bad news for me but at least i know. 🙏🏻
3 rings and 0001 code can be also caused by blown caps like in one of my consoles.
PSU is good, i checked it on another console and it worked without any problems
Also the PSU had a red light when i turned on the console with blown capacitors (2 capacitors blown from what i remember)
bro, thank you so much, i was just about to get rid of my xbox 360 because of the red ring of death, but it just turned out that it was a problem with the power brick and not the console itself. thank you, your a lifesaver.
Thanks for this video, I have an Xbox 360 E that has never had RROD but this is very accurate and helpful for anyone that does get it
Thank you for the information in this video. With it I was able to diagnose a bad power brick and not the Xbox360 I scored at Goodwill.
I just got one and power brick is orange it powered on 2 times then get this screeching noise
Code is 0020 what’s that?
GPU_RST_DONE signal missing after seqUnReset time passed, replace GPU
Who is watching from 2020 yall the ring of death is back i found it on my xbox series x but what ever he said worked for me thank you!!!!!
I have never got the RRoD. However, my Xbox 360 has been acting weird, so I feel like I may get it soon.
Edit: After watching this bid, I thought hmm, I am gonna play Xbox 36p now. And I turn it on to find those STUPID 3 red lights. Right after I said I was probably gonna get it soon.
Edit 2: I watched this, got the code, and found out my Xbox had a circuit board malfunction that caused the system to red ring. Luckly I was able to get it fixed. But the console STILL gave me 3 red lights. WHY!!
Edit 3: Ok, my 2nd RRoD was a completely busted power supply unit. I replaced it. Then power it on but have me 1 red light. Should I just buy a new Xbox?
Edit 4: Ok, RRoD 3 was caused by a disk drive error. A part of a disk get stuck in the drive, causing my RRoD 3. Now I turned it on, and...... WORKING AGAIN. However, I lost some apps (circuit board fix caused this, I think). The total cost: only $348.59. Total time: About 2 weeks.
Crazy, glad you got it worked out!
Lmao it would have been cheaper to just buy a new xbox and take the old hard drive memory unit and put it in the new one
You can also learn this too by reading the manual for the system it looks like he did good on you laddie because he’s exactly right but I never understood the code thing at all
The n64 should be the one on the top shelf. Move that junk over.
Elvis Preston old ass boy
I much preferred the design of the og Xbox too 360 the one over the og and now that I’ve got an x the x over all 3 previous systems what I really like is how the x reminds me of a computer tower
The power brick thing isn't quite right. If there is a power problem in the console (e.g. capacitors, mosfets,...) the power brick will also turn orange 😉
The video that keeps on giving. Just fixed an Xbox 360 that was modded thanks to your video.
1 red light: E74
2 red lights: Over Heating
3 red lights: General Hardware Fail
4 red lights: AV Cable is unplugged
I tried to match the amount of rings to the amount of words I put.
Smart!
I own one of the Xbox 360 slim models and it doesnt even overheat. It, at max temp, goes up to about 80 degrees. I usually have a fan setup to keep it cool anyways.
HIS FACE IS PRICELESS
Great information, was able to use the code to determine my rrod was caused by bad connection at RAM, now to learn how to reflow the ram.
+Mark Burlingame glad I could help! 👍
Dude just put it away in a closet and spend a couple bucks on a newer model. That old model is a useless pile. You have more financial leverage owning a 12 pack of quilted toilet paper.
I have a xbox 360 halo edition with 2 red lights what's wrong
overheating, try cooling it down and allowing plenty of ventilation.
It’s *hot*
Ventilation power is low allow XBOX 360 system to cool
OJ Fargo overheat?
OJ Fargo Simply overheated.
I've had my Xbox 360 for years and I never had to worry about rrod but that comes at a cost my Xbox is pretty loud because of the fans inside
lol i missed the old start up screen
Team FORTNITEYT you're gonna love the next video
Intellitech Studios man can you help me...
I have 3 flashing red lights (rrod) and one green(at the center) but sometimes console works perfect and sometimes have 3 red lights.
Its not the power supply and I think its cooling and I think to get more faster fans for more cooling.
It is good idea?
Fresh what's the secondary code? The video refers on how to get a secondary code and I can determine what is wrong
I don't even have an xbox but this guys ranting is so oddly entertaining
Xbox 360 in 2017?
Hitler Fried Chicken 🍗
2019
2019
Me in 2019
Citroen Games ps3 trash
Hi. I have a fat Xbox 360 (arcade version with a 20GB HDD and no HDMI) which I didn't use for some years because I also have a Xbox360 slim with a Kinect sensor. So, some weeks ago I tried to connect the fat Xbox which was fine when I put it away, and I got the 3 RRODs! I already opened the console and thought I would need to heat the chipsets but now I think that the problem might be with the power suply. If I press eject with the console off, the tray doesn't open. The fans start to move but stop less than a second after. Same thing if I power on the console with power button.
The led in the power supply is fixed yellow all the time. I can't remember if it should be green after the console being turned on.
Are there any repairs for power supply? Or should I get a used one? Do you think that the power supply is causing my 2 RRODs?
Regards.
Definitely try another power supply to check and make sure.
I forgot to say that the power supply lights green for a second but as fans stop and 3 ROD blinks it goes orange again. It is green for less than a second. Only if I had a friend who could borrow a power supply... But all of them already sold the fat xboxs. The only ones still with xbox 360 have Slims....
ua-cam.com/video/Hu1Gj1xn7SU/v-deo.html
Link to my video on Comparing Xbox Dashboards!
We was going 10 year solid till today and you helped thank you .
Really struggling here
Can I message you somewhere I really need help
do you have discord?
Intellitech Studios guess he doesn’t have discord
I guess so
@@IntellitechStudios can I contact you please I have the same problem
@@lilmeme3851 what's your issue?
Fun fact: The console can RROD when the power supply is fully plugged in and in stand by.
It happens when the 360 can't generate its internal power rails before it tells the power supply to turn on.
PlayStation 3 is a million times better
Okee dokee
PS4 has the blue pulse of death so enjoy mate
Tek that was because you got the xbox 360 that had the oldest models. New models are well taken care of and don't have any glitches now, when the ps4 might encounter a blue screen/ pulse of death and also much more. some disks are sometimes not read (probably).
Xbox 360 slim is way better
*THE YELLOW LIGHT OF DEATH*
Hey, do you know why my xbox 360 still sounds like a jet engine after cleaning it out? It's strange. It also doesn't make sense that mine has never red ringed. It's the original too.
It more than likely needs new thermal paste, the paste is definitely dried out and no longer cooling properly
i have the same con
d pad moves
i subbed do u have discored
Ty! 👌
discord.gg/M75NUA
Video was helpful, thanks I have red ring, I did what you did to get the code. 2 of the lights came on for the code. I know you mentioned overheating with 2 red lights. By any chance do you have any recommendations on what I can do to fix it. Thank you
How to fix correctly re solder the solder joints done aka need t-10 screws and Phillips screw and solder gun
Ok I'm missing something when your doing the diagnosis. You push the sync button & the eject button in order to start the sequence of giving you the code, but what are you pressing off camera, to switch from one digit (or whatever) of the code to the next? The code seems to be 4 "digits or characters" long, what are you pressing to get from one to the next please?
What you see is exactly what you do. I'm not pressing anything off camera. The code changes based on what your Xbox is doing.
My Xbox 360 slim Black version has red ring all over turn on button... I try do this method but i fail... Please help me, I really need it.... And my power brick colour is orrange... First time i do this method it work but the display is not working...second time it goes like this..... please help
my xbox 360 gets the code 0003 but it doesn't turn on the console and doesn’t take out the dvd. do you think it's the power cord?
Yes if it's plugged in properly then it's the power supply