Oh, and one more thing. There is a fairly common issue regarding the rifle firing when you close it. It happened to me and was one of the freakiest things ever. It turns out the firing pin needs to be cleaned very, very well all the time or it gets stuck in the extended position. When closed…BOOM! When I looked into it there were several people on the internet who had this happen. BYW, I keep my guns pretty clean. I had no idea that the firing pin had an issue like this.
Coming from decades of traditional smokepoles (I began with a kit CVA Kentucky .45) I assumed cleaning my new Optima would be easier. Not so. Takes about twice as long. Also a feller could just about get the gun as a freebie for purchasing all the cleaning supplies. I'm sure it's all dandy, but jeez! And you can not fail to clean that firing pin. Gotta do that. I use the old fashioned stuff less the water bath and the gun comes out clean enough. Having said all that would I go back to traditional? Nope. Woulda been lucky to hit the backstop at 100 yards with my old guns. This thing is scary accurate out the wazoo at greater distances than the Alabama woods usually allow. And with the shotgun primer Pyrodex actually works in the field! No snaps. Can't recommend this weapon highly enough. Great video CVA Official. Much needed for beginners. And a great refresher for old guys too. And PS...took guts to blow up that gun. This shows how serious CVA is about safety. Just one more thought: I had a brainstorm last year. I cleaned my breech plug with a fuzzy pipe cleaner stem (If you know nothing about smoking TOBACCO pipes look it up.). I wouldn't recommend that.
Great video for those new to this excellent rifle and pistol. I love Blackhorn 209. I've shot over 30 rounds without any fouling or loos of accuracy. The White Hot pellets really suck. Two shots and you're cleaning. Also, I hate Sabots. The Power Belts are THE only way to go.
Just bought mine Saturday. Got everything I could find. However the hunt for primers is on. Might remove the primers out of some shot shells I have if I can't buy any.
Curious. Did you ever find any caps? I can dig 9mm shells being extinct...but black powder supplies??!! Gimme a break. These days whatcha got is whatcha got.
Why didn't you use the ram rod equipped with the gun? That's why I watched this video. I don't understand it. It comes with a palm saver but on the wrong end. You have to unscrew the rubber palm saver to use that end to laod the bullet.
Great video! I just got an Optima V2 and love it! I also use Blackhorn 209. I didn't think that CVA cleaning products were compatible with Blackhorn 209 powder. Are they?
I an optima 50 cal. from a friend that looks just like the one in the video and when he showed me how to load it he said to put the round looking cotton part in first, the pellet in next and then the shell. Is that the correct way because we fired it and I even shot it. Just haven't seen it loaded that way on UA-cam
Just ordered my Optima V2, waiting for delivery! I definitely want to use the Blackhorn powder. should I purchase the Blackhorn breech plug, or is the one included sufficient? pros/cons of each? I've read some conflicting info that the one included will work with loose powder, but this video stated otherwise. Thanks!
It shouldnt protrude if the hammer is resting in the forward position. It SHOULD protrude if you keep the tigger pulled, and you push the hammer forward. This is normal with firearms, and allows you to safely uncock the hammer. When firing, the hammer moves forward so fast, that you're still holding the trigger back (which allows the hammer to go far enough forward it pushes the firing pin forward.
Same issue - did you find a fix? I just purchased and had same issue. Scheels rep said it will fire just fine. I did the steps bootht99 below suggests, also cleaned it and same issue.
What sling are people using for this? I bought a Quake sling and the quick detach swivel will not come close to fitting over the molded sling studs in the stock.
The Quake slings look nice with lots of features, but for me, easily break. So I purchased a couple of the real Amish leather slings along with Uncle Mike's snap releasable swivels. Amish slings are extremely dependable, but with added weight of a large mass of leather. If only target shooting, probably could get by with the Quake slings, but for hunting and slinging the rifle around in public, definitely go with a more well made product, such as the real Amish leather slings.
Why the distracting music during a seriously important instructional video? You do a great job but I have some hearing issues and it makes it difficult. Sorry. But thanks!
I have a. 36 caliber CVA revolver. I've never fired it because of uncertainty. Is there a manual available. Do you have any videos on the care, charging and firing it? If not would you make one and post it on your channel. My sincere thanks for your time and consideration Dean
I’ve never owned a muzzleloader before is the recoil bad especially for beginners in muzzleloaders ? What is the best black powder to use for this? I’m actually starting to have an interest in muzzleloaders guns I’m not a hunter though If the recoil is very very strong what would be a good Choice for beginners with the least recoil but similar to this gun
We are living here in my country, Brazil, a "golden age" in firearms thanks to our conservative and christian President. Well, would you guys like to start selling here, no friends? Would be welcome!
I’m not going to buy a cva ever again. I can’t use mine anymore since I can’t use it with a scope. The hammer spur extension somehow fell off. It is a weird left-handed screw in pin. They don’t have replacement parts and they have said that they have no plans ever to make more. I have no idea why the stupid thing had a left-hand thread but it pretty much make it impossible to replace.
Oh, and one more thing. There is a fairly common issue regarding the rifle firing when you close it. It happened to me and was one of the freakiest things ever. It turns out the firing pin needs to be cleaned very, very well all the time or it gets stuck in the extended position. When closed…BOOM! When I looked into it there were several people on the internet who had this happen. BYW, I keep my guns pretty clean. I had no idea that the firing pin had an issue like this.
Coming from decades of traditional smokepoles (I began with a kit CVA Kentucky .45) I assumed cleaning my new Optima would be easier. Not so. Takes about twice as long. Also a feller could just about get the gun as a freebie for purchasing all the cleaning supplies. I'm sure it's all dandy, but jeez! And you can not fail to clean that firing pin. Gotta do that. I use the old fashioned stuff less the water bath and the gun comes out clean enough. Having said all that would I go back to traditional? Nope. Woulda been lucky to hit the backstop at 100 yards with my old guns. This thing is scary accurate out the wazoo at greater distances than the Alabama woods usually allow. And with the shotgun primer Pyrodex actually works in the field! No snaps. Can't recommend this weapon highly enough. Great video CVA Official. Much needed for beginners. And a great refresher for old guys too. And PS...took guts to blow up that gun. This shows how serious CVA is about safety.
Just one more thought: I had a brainstorm last year. I cleaned my breech plug with a fuzzy pipe cleaner stem (If you know nothing about smoking TOBACCO pipes look it up.). I wouldn't recommend that.
Buying one before the 2021-2022 season starts
I just bought mine yesterday I always wanted to try muzzleloading since I was 13
Great video for those new to this excellent rifle and pistol. I love Blackhorn 209. I've shot over 30 rounds without any fouling or loos of accuracy. The White Hot pellets really suck. Two shots and you're cleaning. Also, I hate Sabots. The Power Belts are THE only way to go.
Just bought mine Saturday. Got everything I could find. However the hunt for primers is on. Might remove the primers out of some shot shells I have if I can't buy any.
Curious. Did you ever find any caps? I can dig 9mm shells being extinct...but black powder supplies??!! Gimme a break. These days whatcha got is whatcha got.
Can’t wait to get my v2 in
Great video! Thanks. Excited to use my new CVA!
Why didn't you use the ram rod equipped with the gun? That's why I watched this video. I don't understand it. It comes with a palm saver but on the wrong end. You have to unscrew the rubber palm saver to use that end to laod the bullet.
I want to buy one so bad it looks amazing
My guy bout broke his nose on that scope.
Great video! I just got an Optima V2 and love it! I also use Blackhorn 209. I didn't think that CVA cleaning products were compatible with Blackhorn 209 powder. Are they?
Muy Bien . Claro y sencillo.
I an optima 50 cal. from a friend that looks just like the one in the video and when he showed me how to load it he said to put the round looking cotton part in first, the pellet in next and then the shell. Is that the correct way because we fired it and I even shot it. Just haven't seen it loaded that way on UA-cam
Do they have any black horn 209 pellet powder
Is there a way to take out bullet and powder if unused to clean gun if living where you can't shoot?
You said 100 gr. Equivalent of blackhorn was a max load then loaded with 120 gr. Equivalent??
Do you sell all the cleaning products in one "kit'?
Just ordered my Optima V2, waiting for delivery! I definitely want to use the Blackhorn powder. should I purchase the Blackhorn breech plug, or is the one included sufficient? pros/cons of each? I've read some conflicting info that the one included will work with loose powder, but this video stated otherwise. Thanks!
Just purchased a optima v2 and my firing pin doesn’t protrude out past the firing pin bushing when hammer is forward.. how come?
It shouldnt protrude if the hammer is resting in the forward position. It SHOULD protrude if you keep the tigger pulled, and you push the hammer forward. This is normal with firearms, and allows you to safely uncock the hammer. When firing, the hammer moves forward so fast, that you're still holding the trigger back (which allows the hammer to go far enough forward it pushes the firing pin forward.
Same issue - did you find a fix? I just purchased and had same issue. Scheels rep said it will fire just fine. I did the steps bootht99 below suggests, also cleaned it and same issue.
Yes bootht99 is right, if you push on hammer you will see that it does come more forward and that’s what it will do when fired
Ive never cleaned my centerfirs rifles and have several that group .5 and under my best being .233
E possibile avere il kit di conversione x modello brutus cal50...anche in Italia ..con capsula #209#..
When putting in a scope what torque setting should I use on the top screws? Thanks
In various videos about scopes in general, its 12-14 lbs. Also, in the paperwork with scopes they usually say.
what grain bullet is the power belt
What sling are people using for this? I bought a Quake sling and the quick detach swivel will not come close to fitting over the molded sling studs in the stock.
The Quake slings look nice with lots of features, but for me, easily break. So I purchased a couple of the real Amish leather slings along with Uncle Mike's snap releasable swivels. Amish slings are extremely dependable, but with added weight of a large mass of leather. If only target shooting, probably could get by with the Quake slings, but for hunting and slinging the rifle around in public, definitely go with a more well made product, such as the real Amish leather slings.
Can I use Whit Hot pellets in my CVA Optima V2? Thanks
Why the distracting music during a seriously important instructional video? You do a great job but I have some hearing issues and it makes it difficult. Sorry. But thanks!
I have a. 36 caliber CVA revolver. I've never fired it because of uncertainty.
Is there a manual available.
Do you have any videos on the care, charging and firing it? If not would you make one and post it on your channel.
My sincere thanks for your time and consideration
Dean
I’ve never owned a muzzleloader before is the recoil bad especially for beginners in muzzleloaders ? What is the best black powder to use for this? I’m actually starting to have an interest in muzzleloaders guns I’m not a hunter though
If the recoil is very very strong what would be a good Choice for beginners with the least recoil but similar to this gun
I’d urge you to look into the emerging 40 caliber rifles, or even look into traditional rifles or pistols, something in 32 or 36
@@orckiller91 Sounds good what pistol would you recommend in 32 or 36 and where to buy it
@@timmy9003 uberti 1851 or 1861 navy in 36 just avoid brass frames as they stretch under recoil, and midway is usually solid
@@orckiller91 sounds good do they ship them in the mail or do you have to buy in store? For the rifles and pistols sorry it’s my first time ?
Can the white hots charge be used in the optima?
We are living here in my country, Brazil, a "golden age" in firearms thanks to our conservative and christian President. Well, would you guys like to start selling here, no friends? Would be welcome!
💕💕💕
Might explode your rifle. If you put in smokeless powder. That's why you're only supposed to use black powder
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
I’m not going to buy a cva ever again. I can’t use mine anymore since I can’t use it with a scope. The hammer spur extension somehow fell off. It is a weird left-handed screw in pin. They don’t have replacement parts and they have said that they have no plans ever to make more. I have no idea why the stupid thing had a left-hand thread but it pretty much make it impossible to replace.
Just purchased a optima v2 and my firing pin doesn’t protrude out past the firing pin bushing when hammer is forward.. how come?
did you pull the trigger?