Building A Dream Shop - The Harsh Reality
Вставка
- Опубліковано 24 вер 2020
- Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.com/wranglerstar
-Radios Made Easy - radiomadeeasy.com/product/wra...
-Amsoil - www.amsoil.com/c/products/1/?...
-GoDark Bags - godarkbags.com/#cody411
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com/r.cfm?b=228804...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystems.com/wranglerstar
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar - Розваги
This is the type of content you used to do I’m so happy it’s back
Glad you’re happy!
jackfordmac thanks man
Agreed.
Here here
The three stages of any project:
- Planning.
- Doing.
- Taking it apart because I just walled in an expensive power tool.
I just did a similar thing... I removed a hall closet and put in built-in bookshelves with a small flip up beach seat to make a reading nook for the kids. Then I realized I had 3 6ft 2x4s laying under the bench that I could no longer get out because I built everything on top of them... so I had to cut them down to get them out
my brother-in-law he brought a brand new dewalt driver and left it behind the drywall we were doing. 😂😂😂 had to open a hole and patch it. Thank God it was in a closet so we could hide his mess up.
Uuuuhhhh! This! Must happen to all good men who try to do their own work lol
Reminds me of the guys who renovated my basement into a studio. They were installing the 2 layers of drywall on the wall and at the end of the day one of them couldn't find his phone so he searched for a bit after a about 20 minutes he had me call it we heard the sound near the wall so we searched and came to find out it was in the wall.
Now that was a fun time cutting the drywall out and patching it.
@@DrCanadianGamer Now that's funny!
when I've done tongue and groove like this, rather than using a screwdriver to wedge in like you did, I cut off a scrap 4 inch long piece of board (with the tongue/grove), inserted that into the bottom, then hit that with a hammer. That way, you don't damage the board which is being nailed.
and I liked the lighting comment!
That indeed is the best practice.
I'd add also to put a spacer lifting the boards a little off the floor
Good suggestion. Perhaps you should be making videos too.
Same here. I don't know how he's not effing the tongue.
@@shahar85
Yeah, I personally would not be comfortable with that untreated wood on the cement floor.
As a contractor,
"that will take a day maybe two".
.
.
.
Week later "just another day maybe two".
You must be the guy doing my buddy's remodel lol
Girts on walls, purlins on roofs.
Thank you! I will use a mnemonic for this..."girts" looks like "grits" and my wife says grits for breakfast really "stick to your ribs"... the way girts stick to walls... anyway, I realize it's a stretch, but it will work in my brain haha!
Girts to the walls, cats are on the roof, purrrrrrrlin
Girts like skirts. Skirts go on your hips. Purlins like pearls. Pearls go on your neck.
@WebCity Films I had four brothers and raised three sons. If you want boys to remember something you have to use what works.
Thanks for providing great content, I’ve been slowly collecting tools and I’m building a work area in my garage now. Your videos have helped me so much, thanks
As often as I have been watching your channel, I feel like I am getting a new house and workshop. Love the progress and the decisions you’ve made Cody! God bless you and your family!
Shop videos are going to have that cozy "up nort" woodsy feel.
Great video! The shop wall looks outstanding. Thanks for the tips and tricks. Looking forward to the W&D video soon. I’m about to move into my new house on my homestead and need to buy a set. Have a great week!
YES! Lighting. Miraculous of God! Catching up on your vids and love the lighting, studio frames, and audio. First class production value!!! Blessings!
In Sweden the appliances stay with the house, Norway you take them with you.
In England we talk about fixtures and fittings, the way we describe what you take and what you leave “if you turned the house upside down, everything that falls out you take, everything that stays put, you leave”
In France it's common to take them with you
The Netherlands here as well. I wouldn't even want someone elses washing machine etc. I have my own good quality material. So please take them with. I feel I buy the house, not the appliances. Here you also see new owners throw out the excisting kitchen and bathroom and put in all new.
Your vids get me so excited to start my projects each weekend. God bless you and your family. Awesome work.
Outstanding work! In the midst of a big remodel of my first home, an old farmhouse in Pennsylvania. Finding inspiration and solace in content like this...
Gorgeous walls, and highly functional! I'm in the planning stage of my new shop, and this has inspired me. So many times we want to hang something, and if your structure is post frame, it's a challenge. This makes it a no-brainer!
I think you should do a video on how to make your home fire resistant ..
You did a great job protecting a couple homes during the big fire .Not sure why more people are not set up with irrigation on their properties
I’m Dutch, when we sell a house the realtor makes a list of what you want to leave behind. Then the buyer has to accept those or ask you to take them.
Usually that ends up in all ‘fixed’ appliances staying and everything else goes.
In Germany they even take the complete kitchen with them.. I have seen them do it in rental homes lol
Those walls are coming out fantastic. Great work!
Looking good, Cody! In my 40' x 18' great room I blind nailed 1x6 tongue&groove syp so I wouldn't have to hoist large sheets of drywall to the ceiling. Gorgeous!
My dad really likes tongue n groove wood and has remodeled several rooms in the houses we lived with it when I was growing up. I helped him when I was old enough. Watching this for some reason made me remember those times. Thanks man. Your shop looks off to a good start.
A little "L" flashing between that beautiful select deck and the concrete floor would have prevented moisture wicking. Other than that, looking good.
Been running a Miele washer and condenser drier for years and will never go to a run of the mill setup. Ultra frugal with water and power and washes exceptionally well. Im a farm boy and I get my clothes dirty. Wall looks good Cody.
Miele 100% gets dirty clothes clean, keeps fine clothes in shape.
@@MrWiggenhammer that's for sure. My white t-shirts look like I used them as shop rags to clean up a greasy old motor into the Miele and there like new again. All my household appliances are Miele. Cooktop oven dishwasher fridge freezer. They are really good.
I love sitting in the woods in the fall. The morning light as it filters through the trees on a clear, crisp October morning is magnificent. It's magical, IMO. It always puts me in a prayerful, thankful state of being.
So interesting what you were talking about with light. That's why in the evening when the sun is warm and bathes everything orange... it's just indredible lol
Coming-along nicely. Doing things “proper” takes time. I’m liking your scripture quote outs at the end of your videos lately.
This is way too relatable. My Dad told me something that always gets me through my projects. “Every hour you find to put into it puts you an hour closer to having it done.” It always keeps me chipping away at things instead of getting so overwhelmed that I do nothing.
Cody, it always makes you feel good when you find out you left the safety ON!! Safety first. 😊
I love your ramblings about light, am jealous of your shop, and am proud of your willingness to be an example of the believers with the scriptures you have been posting.
I think it looks amazing Cody. You are an incredibly talented man & that is why I look to you for advice if I need to know something. God Bless you & your beautiful family. Thanks for sharing your life with us.
Looking great Cody, I've installed this same product on roofs of log cabin houses with exposed beams. It's a great wall treatment, you look Happy! Good luck for you and your family in the future with your new experiences.
"5" at a time, a little less than I'm used to.." oh help me, I laughed soooo hard!!!! LOL was this a good sneaky attempt at adult humor? Or innocently mean and just my mind firing on too many cylinders? LOL thanks for the laugh my friend. Loctite on my friend!
Yup about fell over lol
In the UK it's arranged between seller and buyer exactly what is staying. They can take everything down to the light fittings. I just bought a house and the left cooker, microwave, flooring, a bed frame, and blinds but took everything else. It's all detailed in the contract so nothing is a suprise. However, the house has to be left safe; in my case the seller they had custom ceiling lights which the took with them, but they had to replace them with standard ones so there wasn't just bare wires poking out the ceiling. I'm pretty sure they are even allowed to take lightbulbs if they want to! I've heard of some sales where they took the entire kitchen with them haha! Madness
It is noticeable your happiness and refreshed mood for this new chapter of your lives. It is also being translated to your videos, which makes me refreshed too! Thank you for that. God bless you and family! We miss sweet loaf! Cheers from Brazil
Beautiful shop, can't wait to see it finished!
"It's the best I can do", it looks damn good to me. What makes it so nice is the fact that their are small imperfections, it's the beauty in using natural materials.
Enjoy watching and learning from your videos, God bless you and your family. West Virginia pastor
I love the backdrop that you’re putting up but if that concrete did not have a moisture barrier put under it you’re going to have moisture staining where that tongue and groove lumber is sitting directly on the concrete. You may need to go along and cut the bottom quarter inch of it off so that it cannot wick moisture up.
Love seeing your shop coming together... I have been working in mine and fixing as I go... would love to turn back the clock and do everything while it’s empty. I’m green with envy!!
Walls are looking great Cody! Can't wait to see when it's all done!
I’ve installed thousands of T&G boards and yours are looking great! It’s wood so it’s never perfect and they’ll move around with the seasons and moisture so don’t worry about the gaps. Can’t wait for the finish product with the top and bottom trim boards. It just makes the wall look so clean.
The last washer and dryer we bought 15 years ago, I had had a bellyful of electronic junk and pitiful warranties. I paid a few dollars more to buy commercial models used in laundromats (without the coin mechanisms - obviously). No digital circuit boards to blow, much longer warranty, and better built overall. The only potential negative is the commercial buzzers designed to be heard in a busy/noisy environment. I initially thought I would replace them with something quieter but we got used to it. My recommendation is to avoid all the fancy bells and whistles and just go with something that does the job. BTW - with the price we pay for lumber these days, I don't think any loss with a "select" product is acceptable. You pay a premium to get premium, not something which is unusable.
Hey wrangler star I just re-wired my whole house and in the process stripping the walls for the electricians we found the old school 1x6 shiplath siding. Saved a lot of it, and I used the same stuff you are in a few places to patch where I needed to. Yes it’s the wrong stuff but it filled a gap. Also I had my carport wired 100amp dedicated service and have three plugs on one 20amp breaker three in another and four in the ceiling for lights. At the moment I have way more than enough power. For the moment.
looking good Cody! Going to have lots of space for
Cody, you made me laugh 😂 so much when you explained the 3 phases of a project. Nice to see you smile and laughing too. Keep up the good work you are doing Wranglerstar family. We love you very much !!!
Always enjoy watching the videos inspires me every day God bless you and your family
thanks
Thanks for sharing Scripture at the end. It's great.
Your shop is looking great! Wish I had one like it. Keep up the quality content 👍🏻
Hey Cody, an easy way to remember girts vs purlins. Girts wrap around like a girdle, purlins are the other ones.
I’ve been doing the same the past month or so. Building out my wood shop in Southern Maine. Three 10’ x 10’ glass overhead doors and six large windows in a super insulated 2000SqFt shop. I need this to take in all the sun available while avoiding the cold through the winter.
As a carpenter that used to work on boats, you can soak a bowed strip and straighten it out, or use steam.
How do i know i like your channel? I just watched you for 12 minutes and all the work you got done was nailing 1 board to a wall that was already set in place!! LOL Good stuff man, you make the East Coaster guys proud!!!!!
Coming along nicely Cody. I hope you bought Speed Queens. I love mine.
Very good and intresting video Cody! Keep it up.
In Japan you have to buy lights when you move in. Also a stove and fridge plus you may even have to buy the mini splits for heat and ac
Looking forward to seeing more of the land once you get the shop set up.
I go with high efficiency and then I Just wash everything on heavy duty towels setting. Works great that setting actually uses enough water so I get all the bells and whistles as well :-) I especially love the modern machines they spin SO fast and vary it so it really wrings the water out which means the load DRIES a lot faster which saves a ton of energy!!! because your dryer is the energy pig :-) that is where sensor mode for the dryer really shines.
So right about the washer. When I got the one I have now, I looked at the manual and made sure that it had a “extra water” option. 😁 and I could program that button to mean extra water, rinse cycle or both when pressed. It is set to both and always enabled. 😂
Just an after thought and I live in Hawaii but I've helped my dad put up Rabbit Barns and Chicken Coups and he always had me install cheap no backing batt insulation between any open cell that we wrapped with siding or other material. We had to run electric heaters sometimes during really cold days (He lives in Minn) and it really helped not to have the snow outside transfer cold into the structure. Maybe you don't have that kind of cold or heavy snow so it isn't a factor. Anyway I'm excited for you and your family making something great out of raw land. Take Care and GB
wow look how clean that wall looks! i mean i love all the work that was put into the woodshop and the mechanics bench but its just so crazy to think about. doesnt seem like that long ago either!
Cut a small wedge out of groove cody drive a chisel into the girth about half an inch away from the board you are fixing then drive the wedge with the groove in between the chisel and the board you are fixing.. that way you dont damage the board and you can close up all your gaps.. old timey carpenters trick for ya.. love your work mate.
That's some great looking pine tongue and groove Looks like you got a great batch!💪👊
If a washer isn't cleaning well, sometimes the answer is to install a water softener. If you have hard water, it makes big difference.
What a refreshing video! This really "brightened" my day! 🤣
When we did that, we used a small 9 inch or so sacrificial piece that I would put in, and hammer on so it would push the boards together nice and tight.
I did the same 3 steps...we always forget something...and always modify more than one thing...the finished project always seems to be at least a little different than we envisioned.
I honestly love early videos. I feel motivated to do my work.
Girts and purlins are components of the secondary frame of a metal building. A girt is a horizontal structural member in a framed wall that provides lateral support to the wall panel to resist wind loads. Purlins perform the same service for the roof panels. Girts and purlins may also be called sheeting rails.
When I bought my house a few years ago, the owners left there 'high efficiency' washer. I used it about 6 months before my frustration of my clothes not getting clean peaked. I gave the washer away and bought a traditional washer, with a full load capacity, that actually fills up with water. I'm so glad that I did. If you have pets and lots of pet hair, the 'high efficiency' washers have nothing to do with high efficiency cleaning.
The only thing high efficiency about the weak-azz, stinky front loaders is draining your wallet.
The 3 stages are absolutely me. Great way of putting it! I'm on step 2 of more projects then I care to admit 😅
Totally right on the Netherlands Cody, we go Dutch all the way ;) greetings & love to you and your family from that rainy place!
Wow, Wranglerstar just made a double entendre. I am impressed.
Looks awesome!! I grew up in the Netherlands!! Glad I made it out 🙄...and the tops and bottoms often are a little bit narrower due to shrinkage from end grain, 3/4" T&G has this more profound than the 1-1/2" is seems.
I recently went through trying to find a washing machine that actually cleans. I got a Speed Queen TC5 and couldn't be happier. I've also heard good things about the Maytag Commercial (MVWP575GW). My son just got a reconditioned Whirlpool direct-drive and it does an even better job of cleaning than my Speed Queen.
Ventured into the comments to look for Speed Queen!
Speed queen I think still makes their basic laundromat style washer/dryers. Old school well made decades old design, easily repaired. Of course they can't use any energy star type ratings because they're made to last 20 yrs instead of being underpowered for 7yrs and trashed
@@oldschool6345
Speed Queen?
I have a dryer my parents bought fifty couple years ago. Yeah I've worked on it a few times and we use the clothesline as much as possible, but, still going strong!
I was going to mention speed queen. My sister has her own dog grooming business and goes throw towels like crazy after giving dogs baths. She does 2 loads of towels everyday. She went through washers and dryers continuously until she bought Speed Queens. She said her towels are finally clean. Once my washer and dryer goes out that is what I will be buying.
@@elgringoec my parents bought westighouse front loading stackers when I was born. Laundromat style machines. Heavy as cat equipment lol. When I hit 25-30 they finally had to give up on them - couldn't get parts anymore.
Loving the quotes keep em coming 👌 god bless 🙏
Good morning, Cody, on this early a.m. Friday morning upload.
Thank you for your insights.
Thanks Cody. I’ve had good luck with my HE set but I did have to do a major repair on the washer 1.5 months outside of the 5 year warranty lol
Looking forward to seeing what washing machine y’all picked.
If memory serves, which it normally doesn't, purlins support the roofing while girts the walls. I could be backwards and someone please correct me if I am.
Girt it up!
Or, purlin it up?
Hmmm 🤔
😄
You got it right; they are girts. Looking good!
Really looks nice! 48 degrees.... i am still in shorts at 48. haha
If you can, split your receptacles (top and bottom) on to separate circuits, being fed from opposite side of the bus in the breaker box. That way you get 230 V at any receptacle with an adapter that uses the phase side from the top and bottom outlets. Can be very handy...
Looking great, but I see you used pressure treated on the bottom horizontal sole plate, but the vertical doug fir are touching the ground on the cut ends, wont they eventually rot touching the cement like that? Love the new place, congrats!
Wall looks awesome, as for the washer and dryer definitely no front loaders for us, they don't clean my husband's clothes, he gets way too dirty. Speed Queen washing machine is for us, USA made and sturdy.
Speed queen are the best washers and dryers out their
Looking great!
I have the dewalt framing nail gun and it's been great. Way the battery lasts really long. Framed my basement with it and done several other projects.
You should look into using 4000 or 6000 Wiremold. It is a metal channel that you can install outlets anywhere you want along its length. It comes in 10ft pieces and gives you infinite options with a very clean, finished look.
I concur, we got high efficiency at our new house and my wife HATES it. We moved in just at a year ago and she’s very much over using the washer and dryer we purchased 🤷♂️. Live and learn I guess. Shops looking awesome!
The deep Grove is stunning @WranglerStar
Beth and I went with a Speed Queen TC5. C meaning classic. It cleans! And they had a promotion for a 10 year warranty.
Looks great!!
We have both the dewalt cordless finish and framer gun at work, I love them
I gave all my dewalt tools away after I got ridgid pack as a gift. I have to say those tools have performed so well for me on the personal. They use the same lithium batteries as milwaukee as well as share a majority of the internals as Milwaukee. I bought a few 9amp hour batteries as well. I have the ridgid of that same type of nailer and man it does work well. it replaced my paslode completely
Love your content!
Look into scaffolding on wheels. It will save you a lot of time and you can use it to get to the top shelf’s of your pallet rack.
Wow, looks lovely. Small snag, that would cost me more than the whole building in the uk! Your timber would be 1000s of English pounds.
I would recommend a duplex at the bottom and a one higher at bench height. Gives a lot of flexibility.
Great content. Me personally wooden walls are not my favorite for a shop. I prefer white tin. Mainly because every year or so I want to pull out everything and wash it down with a garden hose or pressure washer.
Hey Cody everything is looking great I enjoy watching all your vlogs 🇺🇲💯
You can never get enough electrical outlets. I looked a while back and what I have plugged in in my shop all the time is about 22 items, not counting when I need to plug in something else. I think if I were starting from scratch even on my small 14x22 shop, I would have three four plug boxes on each wall split into six 20 amp Breakers. In addition, I would add at least 2 to outlets in the ceiling not counting any power supply for lighting.