How to Install Recessed Lights | Easy DIY LED Install
Вставка
- Опубліковано 9 лют 2025
- In this video I'll show you how I installed 4 slim LED recessed lighting fixtures into my kitchen ceiling to update the lighting and give it a more modern look and feel.
Recessed Lighting Blog - blog.recessedl...
Affiliate links to everything used to install the LEDs:
Ensenior 4 Pack 6 Inch Ultra-Thin LED Recessed Light 4000K Cool White - amzn.to/3qbKN0i
Wago 222-413 LEVER-NUTS 3 Conductor Compact Connector - amzn.to/37aHRrU
Southwire 28827423 100' 14/2 - amzn.to/33o0SpI
Cable Connector, 3/8 Trade Size, Fits 1/2-Inch Knock Outs - amzn.to/2KNqExg
Sunex 3619 10" Automatic Wire Stripper & Crimper - amzn.to/2V9bfcq
Hordion 155mm/6.1 inch Hole Saw - amzn.to/3laRnjD
Hole Saw Dust Bowl - amzn.to/2HM8w5L
Bosch Blaze GLM 50 C Bluetooth Enabled 165 - amzn.to/39ltAeL
FastCap PSSR16 16 FastPad Standard Reverse Measuring Tape - amzn.to/3q7UBs1
DEWALT Corded Dril - amzn.to/37iIaki
filming gear I used on this build (affiliate links):
canon Eos M50: amzn.to/2KrtDJL
sigma 16mm f1.4: amzn.to/39N2oUb
manfrotto tripod: amzn.to/2KfMvvX
Rode microphone: amzn.to/3g0DXEw
Zoom F1 Audio Recorder: amzn.to/2CxehS6
Everything else you see in the video not listed: www.amazon.com...
For all the songs I used, Check out Epidemic Sound!
Try it for FREE for 30 days!
www.epidemicso...
Follow me on Social Media:
instagram: / keywoodworks
facebook: / keywoodworks
twitter: / keywoodworks
This is the video our generation needs.
If I can save just one millennial, it was worth it.
So how does it power 😳
stupid..even kids can do it..where is the wiring part?
A millennial married couple here! Me and my husband enjoyed doing this home project together. Thank you!
That's sad.
So hard to find a video that shows you how to actually wire it. Cutting holes in ceiling and all that is super easy. I have no idea how to get power to the light. You know, connect the light to the electricity. THE most important step, that these tutorials seem to leave out every time.
Green to green white to white black to black
If you don't know how to wire, then probably leave it to the professionals is a better choice. It is electricity after all and there is a chance of fire if not done right 😂
I agree. I know that I am capable but I just need to view it and learn. I have watched so many videos and people keep leaving that part out. They always say "leave it to the professionals", as if those professionals didn't also have to start somewhere. I'm not trying to wire an entire home, just add some led ceiling lights.
Yeah. What is the proper wiring diagram? Do you wire these lights in series by jumping from one light to the next or do you use a star pattern with a central junction box that feeds each light with it's own 14/2?
Or without an attick
You showed the easiest parts of the install. What about wiring the string from the original box to each light? The video search goes on I guess. That website to calculate the measurements was brilliant. I'd never heard of that one before - thanks!
If you find that video, can you update this comment?
If you don't know how to connect each light to the adjacent one, or from a power source; you shouldn't be doing this yourself.
Same i hoping ti see if you drill through rafters or can wiring get secured to top of rafters? Do wire need to be in metal conduit
@@Randy_84 Guess you were BORN with that knowledge, huh? Everything is simple, once explained. Only the jerks seem to forget that there was a day they didn't know either.
@@Randy_84 if you know how, you wouldn't be watching a how to video smart guy. The point is to learn and you are hating because he's trying to?
I was looking for the wiring instructions. Thanks
Wish you would have shown you wiring them all together
Here's a video showing you how to unbox, drill large holes, and plug things in. Enjoy. I have to give credit on the links though.
@@madmo453 where’s the link
@@krisomarcrispin1035 There are a bunch of links in the description.
@@madmo453 the Amazon links?
I am a professional home remodeling contractor, but I love to see what other people are doing wit their projects when I have time. This is faaarrrrrr and away one of the best DIY videos I have ever seen! Not only is the overall production quality excellent, although simple in it s execution, but this guy has taken the time to make very clear explanations and the camera work and sound quality are great! Please keep them coming! 90% of UA-camrs could learn a hell of a lot from your production example. I cringe at most of the DIY videos out there!
Great video! Ordered my lights and was looking for some instructions but none really explained the wiring part and you did awesome! Thank you!
Wow this is awesome 😎. I’m installing some too to for me and my dad. And even if we are right on a joist it will still work. Even in mobile homes with only 2x4 space.😎👍
If you want to dim them is there going to be another wire? Which way go connector would you wire it too
I don’t know if you read your comments sir. But I appreciate you thank you for your time I’m roughing in some and it is going to be very helpful
How you make hole in the ceiling 😮 what tools do you use ..
Hello, Thanks for the instructions! Three of the eight ceiling LED lights turned off with no reason. I tested the LED lights, they work fine but there must be a problem in the wiring or in the J-Box. Do you think I should rewire or but a new J-Box to fix it?
great that you covered the easy stuff... why didn't you also cover the wiring to each junction box?
It would have been nice to see you run the wires from one hole to next, but what do I know. Lol
I was thinking the exact same thing. I’ve watched 39 videos trying to watch somebody do it with no attic above the room there working on. I’m trying to figure out how they connect to each other. Each individual Light?
Well the first one would have to be the middle because that’s the existing power drop. You would need to drill the holes and run wiring from the center to the second hole. From the second hole to the third one, etc. Do the math and determine the shortest distance to save on wiring. If the holes are not too far apart, you should be able to flop the wiring around until it’s close enough to grab it.
Use one knockout as power in, and another knockout as power out. Be sure to use those plastic grommet inserts he showed to protect the wiring and keep it from sliding in and out of the box. Finally, be sure to check your local electrical codes and make sure they don’t require anything out of the ordinary. Check your light and driver to see if they are IC rated as well or they require air gaps all around.
Man tell me about it! Smh
Hated Lever nuts, they've failed on me so many times, so id rather use the traditional twist nuts. Worked perfectly when installing these.
You light up my life.
You commenting on my video has completed my life...it’s all downhill from here.
@@KeyWoodworks I don’t know about down hill...maybe side hill...
Nope....straight down hill from here
@@KeyWoodworks Enjoy!
And I thought Nick was whispering "I love you" to us podcast listeners....I think now it was all for KJ...lol
Excellent video!! Well done
Would like to see how you connected the light to the junction box in the ceiling
Definitely keep the gasket on. It seals your light to the sheetrock so your air doesn't leak. Especially if you have a texture like the one on the video. OR at least caulk behind it in the attic. Air infiltration is killer for your energy consumption.
Great tutorial.
AMAZING VIDEO!! Been Looking for a video loke this for so long!! THANK YOU SOOO MUCH!!
Can i change out my white led light. With color one’s. By just connecting the new light to the junction box. Are the pin connections universal?
Really wish this included how to string additional lights
Thanks for the video, but can you tell me how you connected all together in one!
the calculator was supper helpful
I am a renter and I think this is the type of light that is in my kitchen.. it burnt out is there a bulb I can change?
hi .. nice video. i have a problem, i installed the leds and my afci started tripping and when i reset it, it works fine again. any idea what the problem could be? thank you in advance
how can you remove the light without damaging the ceiling if the springs are holding it?
Can I use the old junction box? Also if it’s 2 pin and the other box has 3 pin is there an adapter or do I have to change out everything?
Great video!
How do you wire them in series? None of these videos seem to explain this unless i skipped over it. You must have a wire in and a wire out, and combine all 3 black wires etc in that same 3 way connector? Or are they just two way?
Thanks for the help.
how did you know if you would need 14/2 or 14/3 for the wiring?
Thank you for the video Nick. I see your two Amigo's from shop sounds commented...finally. haha. I also want to give you props for the editing you do for Shannon on that other podcast with that dude that whispers to wood and the hairy dude that likes slabs. Shannon has been giving you thanks for your help in all things related to sound and video.
Thanks for watching, Rich! …and thanks for listening to that other podcast I work with 🤣
"More importantly, my wife loves them.." Smart man right here!
That's such an easy light to install. Love them for retrofits.
Soo easy!
So how does it power?😳
The first tool used seems to be the one tool not listed. That wicked knife you open the box with! What is it?
ah that's my Gerber Folding Cleaver - amzn.to/2M48qII
Great video! But I did have one question. Why did you take the light out before drilling? Wanted to break out a new headlamp? lol
So I could measure where the new light needed to go.
What did u do with the original junction box did u patch the hole up and did u simply connect/run all those 4 lights into that main junction, can u show us how u did that? Thanks so much
Good vid👍
thanks!
@@KeyWoodworks
Just did some this weekend
Cheers
It was helpful to see how the light’s clips are spring loaded-but what is an easy way to release them if you need to change them? (I have one that flickers/or does not work sometimes.
Just pull it down. Simple as that.
@@KeyWoodworks thanks-upon closer inspection the installers mudded around the fixture-so I will need to slice it from the ceiling.
How do you daisy chain these if you only have one existing light wire?
great job bro
Was that actually copper or aluminum wires in the junction box, they look silver?
I have similar LED junction box recessed LED lighting. I'm looking to swap with Philips Hue, but the cable ends don't match (3 prong junction box vs. Orange LED cable head). Any tips?
Good job!!!
This video is lit. That distancing website it amazing.
HA! It really is! I'm so glad I stumbled upon it.
Great vid thanks
I need to see and know how to connect that single switch junction box to the power from the old light?, otherwise good job.
Do you not have to connect the junction box to the ceiling joist? It looks like you just threw it up there.
You showed everything but what I needed to know lol. How to run the wire.
Look elsewhere.
It made me irrationally angry when you easily pressed that knockout push in connector right into the box. 🤣 I have the same looking ones but the ones that I bought were made out of adamantium or something because the tabs wouldn't compress and they were a NIGHTMARE to install. I changed them out later and they were even worse to remove. I mangled the boxes doing it. They were the correct size and everything so I don't know WTF. I just got some different style ones that have a split down one side and they snap in just as easy as yours did. It made me cry a little bit when I tested it out. 🤣🤣🤣 I have a shitload of these lights (30+ of them) that I am going to install and I was not looking forward to those connectors and the blown in insulation falling in my face the whole time. and those WAGO connectors are great, I use the newer version with the clear housings. Love them.
It might be the brand of LED lights just being cheaper so my junction boxes are super thin, I'm not sure.
Doing this ASAP upstairs in my studio room and bedroom!
no regerts.
Great job on the install, they look super!
Great video. I'm not electrically minded, how do I tap in the 3 wires from the lighting box into the existing wire and then daisy chain to more recessed lights? Is it just a matter of matching up the white, red, green wires and then carrying on?
thanks! google how to daisy chain and it'll show you all you need to know, it's very simple.
Awesome video! Just what I needed. Are you concerned about how hot the little transformer gets? I was wondering if I should install Tenmat fire hoods, I have a flat roof? Thanks!
Good idea building but not enough technical on the light hook ups. Sequential or the old fashioned way spider webbing back each to the junction? I assume to the latter.
Great job
thank you!
how much do you think the installation costs if i were to hire an electrician? i need 6 in the basement.
hard to tell without knowing where you live and the going hourly rate of electricians in your area. If you're wiring is pretty straight forward, I'd say 15-20min per light, so a couple hours labor.
nice video. What type of flooring do you have in your kitchen?. It is hard wood or hardwood-like ceramic/porcelain?
Thanks! We have red oak hardwood floors.
Can u cut the twist connector off and just wire it to a 12 Volt system
You made it look really easy. Nicely narrated!
Thank you kindly!
How do I connect all these lights together
Where would you put the junction box if it’s a concrete ceiling
The most important part is missing from the video: wiring.
This is about the 15th video I’ve clicked on can lights and nobody has showed the wiring I guess I’ll figure it out myself
So how does it power?😳
I’m putting these in my living room but need to do two zones, each on a new switch. Still not sure how to wire that!!
Any tips on how to remove these? I moved into a condo that had these pre installed and one is flickering. I seem to only scratch/crack the ceiling trying to get under the flushed edges.
Just pull them down from an edge
How do we insulate these lights with or without insolation?
No need.
So if I have 1 light fixture in my living room and I use those wires how do I connect more than 1 light?
Any recommendations on how to remove and replace them? I have one flickering
To the point!
I love the software page to have equals sizes !! Amazing !
So if I want these lights on the first floor of my house there is no way to do so because I can't get the wires in each hole to connect.
You can drill thru the joists but I wouldn’t want to do that.
You just did 2 lights for the whole kitchen?
How did you wire them up?
So what goes out on them? Is it just the "bulb" portion so that you leave the junction box and only plug a new light in?
I found some really well priced 3", 4" and 6" slim pot lights from a company called Product Pro Industrial Supplies. They have both a Canadian and US site for easy ordering.
Question. Assuming you used the existing light as a power source. Did you run the romex from one junction box to all 4 lights individual or did you run the lights in series and go light to light?
I daisy chained the lights together meaning I ran the Rolex from one light to the next.
Okay! Thanks for the insight. Was curious if you had enough room inside the junction box to make the connections. Doing this is my kitchen this weekend and was doing some research. Appreciate the insight.
Plenty of room in the junction boxes.
What did you do with the old hole and fixture?
Three the fixture away and patched the hole.
Did you just replace the old hole with new drywall to cover?
Yeah, just cut out a section and patched in a new piece.
can these be replacements for traditional can flood lights in kitchens? I assume they come in various diameters.....
What did you do to the hole where the old led light was? Patched it up?
Awesome! Need to keep these in mind for the next house!
Thanks! You should!
How did you connect the other lights to the first one?
Daisy chained them
If you have an old house where the ceiling is more than one layer of drywall, do those springs still work?
You could always remove some of the drywall so the springs would work.
How did u connect the wiring?
Good for you having attic access! Otherwise to feed wire in daisy chain across joists with no attic access you would then need to drill through the joists correct?
you are correct!
What’s wrong with the current t rectangle lighting ???
very cool!!! Ill have to get some when Im ready to change out my lights
Thanks for watching!
How did you explain to your wife the hole in the ceiling from the old light?
Thanks for the great tutorial. What are your recommendations for installing these lights in a living room? Higher or lower than the 4000K? Thanks!
I went with 3000K in all other living spaces and its a great color option.
Thanks so much!@@KeyWoodworks
I am recently installing recessed led lights and I got the variable settings one that u can set at 3k, 4K, 5k. Then I added a dimmer cuz these r dimmable. Therefore u can vary the brightness for cool to white bright
@@KeyWoodworks an electrician installed these lights in our bathroom, but the instructions don't show how to change the color temperature, can you tell me how
If your lights are able to change color temps, there should be a switch on the junction box to make that change.
How do you replace/remove them? Just pulling or would the springs damage the ceiling?
Just pull down!
I can connect this led light with 220 volt ac
Nice! Do these cause heat of any kind? Is it safe to be near insulation?
The ones I used out out almost zero heat and are rated to be near insulation.
just make sure these are ICE rated
Can anyone recommend a dimmer switch for dimmable canless led lights that wont cause buzzing?
cool video.. thanks for these great tips!
Thanks for watching!
I recommend to leave the gasket ring on, this will help stop the draft air flowing into your house, or humid air rising up into your attic that can cause black mould. it's good to realize that a team of Engineers and or Designers have developed these lights to work in our homes so that some of the "not so experienced DIY'ers" are successful. Seldom do I change a product that Engineers produce.
Great video man!
Glad you liked it! Now I expect to see you installing these in your house!
were did you buy your island chairs?
From a counter height table and chair set from a big box store.
What size are knock outs and knockout connectors?