My Q7 just took a dump saying oil pressure sensor fail. Waiting for the shop to give a diagnosis now. 😢 I think it hurt something 🤷🏾♂️. Saw some oil shoot out behind me and it's leaking oil from somewhere.
Wow, hopefully it's just the sensor. Usually on turbo cars when the centercartridge oil ring fails it will shoot oil out the exhaust but not on superchargers.
@@cmidas3396 yes, it is really helpful. I have just bought the two of sensors you are changing. I have problem with the temperature of coolant and transmission oils after a couple of hours driving. The cars activate the R position and the cars blocks in the middle of any route. it shows the Transmission position sensor and keep driving carefully. i dont think it is a transmission box trouble but tempertature problem. I wish I can your experience or suggestions on that
I haven't experienced any problems with the transmission on this particular car. The car over heating can cause other check engine lights to come on. I would say try bleeding the cooling system of air and check for leaks. If the trans sensor code keeps coming back then change it.
Great how to :) I'm gonna try this with supercharger on this weekend if the parts arrive, and if not possible then gonna do pcv/thermostat/maybe injectors and take the supercharger off and do all that while im in there
@@cmidas3396 plz post Dragy 1/4 mile/mph increase results on E40! Before n after your port job..this wud be awesome! I bought 80mm Suited2the9s tb upgrade and looking to have my sc ported..
@@cmidas3396 1) delayed by 3 weeks. 2) the installer contacted him and basically told the installer to deal with it. Lucky it was purchased through PayPal and got a refund. Contacted Shane explained the situation. Shipped it out to him and within a week had the charger back and installed
I use G13 coolant in the coolant system and water plus water wetter in the HX system. I'm running a copy of the Audi R8 oil cap & coolant cap I got from ebay. I switched the valve & seal for them from the oe caps
@sherwinnelson681 You mean the seal & valve? The valve in the aftermarket coolant cap has a weak spring so it won't hold the sane pressure as the oem cap. The aftermarket oil cap seals are not as good as the oem seal and would leak prematurely so I switched the seal to an oem seal.
Love me that 3.0t content!! 😂 C7 baby!
Thanks 👍
Thank you for the very good informative video.
As always, great detail video how to!
Thanks, I appreciate it.
Thought you was finna drop that washer in at first🤣🥵
Yeah 😆
Yep much appreciated C!
Thanks 👍
Good work
Thanks 👍
My Q7 just took a dump saying oil pressure sensor fail. Waiting for the shop to give a diagnosis now. 😢 I think it hurt something 🤷🏾♂️. Saw some oil shoot out behind me and it's leaking oil from somewhere.
Wow, hopefully it's just the sensor. Usually on turbo cars when the centercartridge oil ring fails it will shoot oil out the exhaust but not on superchargers.
great content!!
Thanks. Hope it helps.
@@cmidas3396 yes, it is really helpful. I have just bought the two of sensors you are changing. I have problem with the temperature of coolant and transmission oils after a couple of hours driving. The cars activate the R position and the cars blocks in the middle of any route. it shows the Transmission position sensor and keep driving carefully. i dont think it is a transmission box trouble but tempertature problem. I wish I can your experience or suggestions on that
I haven't experienced any problems with the transmission on this particular car. The car over heating can cause other check engine lights to come on. I would say try bleeding the cooling system of air and check for leaks. If the trans sensor code keeps coming back then change it.
Great how to :) I'm gonna try this with supercharger on this weekend if the parts arrive, and if not possible then gonna do pcv/thermostat/maybe injectors and take the supercharger off and do all that while im in there
Yeah I've heard that the sensor under the supercharger can be changed without removing the supercharger.
@@cmidas3396 I'm hoping so, would save a lot of work. But if not then the cars on 85k and probably needs it anyway
@BarbecuedPossum Yeah always good to take care of other things while your in there.
Jokerz or Shane Horning ported s/c?? or did you port it yourself bro?
One of those with horrible results then I ported it myself.
Shane Horning is legit!! Great customer service. NO BS. Had a bad experience with Jokerz then went to Shane.
@sebastianlorenzo4935 You just guest it. Same hear, very bad experience with Jokerz. I'm going over it in the next video. What happened in your case?
@@cmidas3396 plz post Dragy 1/4 mile/mph increase results on E40! Before n after your port job..this wud be awesome! I bought 80mm Suited2the9s tb upgrade and looking to have my sc ported..
@@cmidas3396 1) delayed by 3 weeks. 2) the installer contacted him and basically told the installer to deal with it. Lucky it was purchased through PayPal and got a refund. Contacted Shane explained the situation. Shipped it out to him and within a week had the charger back and installed
What problem or code were you getting to replaced the oil pressure valve sensor?
Honestly I can't remember the specific code but I would get a warning to not go over a certian rpm while driving.
@@cmidas3396ok 👍 thanks
What coolant and oil caps are you using
I use G13 coolant in the coolant system and water plus water wetter in the HX system. I'm running a copy of the Audi R8 oil cap & coolant cap I got from ebay. I switched the valve & seal for them from the oe caps
@@cmidas3396 what was the reason for switching them
@sherwinnelson681 You mean the seal & valve? The valve in the aftermarket coolant cap has a weak spring so it won't hold the sane pressure as the oem cap. The aftermarket oil cap seals are not as good as the oem seal and would leak prematurely so I switched the seal to an oem seal.