How to CLEAN a China ATV Carburetor!
Вставка
- Опубліковано 24 бер 2018
- Step by Step!
In today's video, we'll be working on a Daymak 150cc China ATV.
There's all sorts of issues on this machine, but in this video we're just going to be focusing on the carburetor cleaning!
I show you how to remove the carburetor, and how to disassemble it!
After it's disassembled, we then move on to the cleaning process.
Once the carb is cleaned, I show you how to reassemble it, and make the proper adjustments!
We then reinstall the carburetor onto the ATV, and start it up for the 1st time in over a year!
I then show you how to adjust the idle.
_______________________________________________
Replacement Carb - amzn.to/2I6cTTt
Fuel Line Clamps - amzn.to/2DY44ZO
Carburetor Pressure Tester - amzn.to/2DThpCD
Tip Cleaners - amzn.to/2G8Fyes
Pipe Cleaners - amzn.to/2GboJLw
Gumout Cleaner Spray - amzn.to/2ukNV0M
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
/ eliminatorperformance
/ eliminatorperf
/ eliminatorperformance
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks - Навчання та стиль
I wish I had found this video much earlier, I think this has solved every issue I have with my kids quad because of how well it was explained. Thank you so much. Can’t wait to have another go at fixing it now
Dude .... I just bought my boys a 110 and 125cc... Today!!! They were used and I'm looking for videos on engine cleanup ... Your Video is LEGIT!! Info up the ying yang. Well played. Good game. Saving this video for later use!
Wow. I can’t believe how thorough you explained everything. I’ve been terrified of trying to disassemble and clean my king quad carb so I’m starting small with my daughters 50cc viper carb and I’m 100% confident I can clean her carb now and get her quad running right. Thanks so much for making this video. You’ve earned my sub and I’ll be sure to watch all your videos to learn more! Hoping to find a Suzuki 300 carb cleaning video 😆
Bro this was so thorough I really appreciate this you covered EVERYTHING. I am doing my wifes XR80r and this really helped!
Thanks for watching!
Got a Tao Tao 125 for my 10 year old and no gas seems to getting through. I now see a very stressful job ahead of me. Luckily, I have your video to help me. Thank you so much!
One of the most informative videos I've seen in a long time. Thank you.
Excellent video. Hopefully this is all I need to get my kids Chinese Go Cart going for Christmas.
Probably the best video I’ve seen on these Chinese quads
Awesome man, your video is very helpful for me, thank you very much from Saudi Arabia
Thanks for this video, I have never taken one of these apart to clean. I just bought a roketa 90cc go kart so I will be doing this soon. I really want that cleaner machine you had, that would make cleaning stuff so much easier. I subbed your channel as well.
Thanks for watching!
Thank you for this followed it step by step . Thought I would clean the carb whilst waiting on a new starter motor.
Thanks!
Amazing video. Just what I was looking for. One detail I’m dealing with right now that was mentioned is the bb sized ball bearing. It fell out when I turned the carb right side up now I can’t figure out where it goes. But it looks like it’s the same exact carb that you are working on
Very informative video on the carburettor and centrifugal clutch operation on this Daymac Quad. Your Eliminators should be extremely careful when buying these machines used since basically they are like Bic lighters ie: disposable, they may find that the cost of repair is beyond what the ATV is worth and may be better off buying a Honda or other quality made ATV. Saying that, they also should know that when buying any used equipment there is always wear and people normally are not selling something because they don't have issues with it! You likely have run into this with some of the mowers and other equipment you have taken as trade in on your fully serviced equipment ie: low compression and basically a scrap engine.
Amazing video. Love the glasses!
Hey man thanks a lot for this in depth video! Well done very good video
Thanks for watching!
I love your video... very informative and in depth Thanks
Thanks bro, love the helpful vid please make more I just got a broke down Suzuki Ltr 230 and found the carb is clogged
Thanks for watching!
great video. very descriptive.
Awesome video! Thank You 🙏
You're welcome!
Damn this video is on point!!! Beautifully explained thanks!
Thanks for watching!
U can adjust the Kickstart thats what I did on Chinese quad 150cc.
very helpfu video thank you
Really good video but i have a question about the ignition coils.
The metering tube does it have a hole running through the centre like from top all the way through?cos in my other bike it has hole running from top to bottom as well as through the sides
Good video IV done the carby on my 150 IP57QMJ engine I have taken the Jets out they were blocked done a clean on them the engine runs but won't idle on its own I'm thinking I haven't seated the Jets correctly and I can't find any information on them so far
Thanks! The ATV I got has a mod, where its a handlebar twist for throttle that goes to the top of the carb, but I see the thumb throttle still here with its cable just hanging. How can I switch the cable? In your video it seems the cable is attached to the cap mechanism? Does the cable and the cap come apart?
well done!
What was the way you said you got some manuals? Put in serial number ?
Nice vid 😎
Also I find when cleaning carburetors , I find a new tooth brush work great for cleaning out the jets and Q tips. Hope this helps everyone.
I have this exact Chinese quad! But mine doesn’t have a kickstart.. anyways I bought it for $100 cause it wasn’t running, I then replaced all the electrical for $40 replaced the gear and starter clutch for $60 and bought a new carb for $70 and everything up to now is working and doing its job! The last piece to make it run is in the mail right now and it will be here tomorrow:)
Awesome! And you're lucky, these kick starts suck, who designed it to go forward? I have size 13 boots, I almost broke the fender lol
Eliminator Performance haha it woulda been a problem for me too then haha I’m size 12
I have the same quad but different motor but anyways my boil is held in by 2 pins in them instead of screws so what do I do
Do you need to put a lubricant or some coolant inside the carburetor? When I took mine apart it had some green liquid come pouring out of it. Is that oil or coolant?
can a jewellery ultra sonic cleaner work for this too since there pretty cheap ?
Getting parts for the kymco is hard to find, I want a new crab but can't find one
My carb is like the second one you showed can you do one for it
Hey bro can you tell me why my atv is more faster and has more start in reverse than in drive
Hey, i got myself a chinese 250cc ATV and quickly cleaned the carb, but when i start the atv and rev it, the throttle starts breaking up. It revs up but then bounces and breaks up even tho the throttle is held at the same position. Any ideas what could cause that? It idles and stays running, usually the idle gets uncomfortably high for no reason which is why I went to clean the carb in the first place. Any help is appreciated.
My needle valve was stuck closed I pulled the carby apart and the needle valve doesn't have the metal clip hooking it to the float is this normal in some models or would the old owner have done this?
I'm not too sure, would have to Google a model number to find a parts diagram
Oh man can u explain the gas lines .i have the same carb but lines r mixed up.simply explain the dirtection of the lines from the tank to and from the carb .i have a gas line coming from my tank going ..nowhere .i have a line going from the front of my ..engine running around the right side to left to a shut off valve. On the other side of the shut of valve through a filter to the ..intake ..i have at the bottom a small line underneath for overflow .thats it .i dont know who did it .but if u could quickly run me through where the lines actually run starting from the tank that would be amazing. I did like and subscribe.the shut off valve has only ends on it .im thinking maybe its not the right valve .maybe i need one with a vaccume on it ?
What tool you use to idle it
On mine the atomiser jet is blocked solid any ideas on cleaning it ? the holes in the side are clear but the hole through the centre is block solid
You might have luck using a welding tip cleaner kit if you think you could break it with some wire
I cleaned the carb on my sons baja 50, and after I pulled all the jets a small brass washer came out, any ideas which jet it goes on?
Probably under the main
Big Jason Boot!!!
Hey there... well i have a question. I just get one. Free. But. It wont star... it just cranks but wont star. It has new fuel filter. But looks like it doesnt suck fuel. . What can be the problem...??. Sir. And nice video. I hope to fix mine.
Probably carburetor clogged main jet.
Great video but can’t even disassemble my carb so I guess it’s time to buy another carb
Haha same here just found one on Amazon for 18$
Whats the cost for a carb rebuild and clean
Old video but, JIS screwdrivers are your friend. Those are JIS screws and Phillips screwdrivers will damage them.
Can you help if you know? When I have the gas line turned on my grizzly it will not start with or without choke but if i turn the gas line off it starts and runs until the gas in the bowl is empty then it cuts out. Do you know anything I can do to fix it?
IT might have a leaking needle valve, meaning the carb is flooding with fuel.
After not running it for a while, with gas valve ON, check spark plug and see if its wet with fuel.
Also smell the oil, if it smells gassy, replace needle valve in carburetor!
Yeah that’s what it is… Mine was doing the same thing
hay. my china atv only ran when i had choke on alittle. would not run without. it died right away. and now after driving it alittle with 5 % choke on and barely anny power. it died and now its just puffing air out and not igniting. ive check for spark.
also there is alot of air comming out of the enginebay air out hose.
Not bad machines for the money..but if you don't like to check bolts and use lock tight..these are not for you..lol and you got to check bolts all the time..i I love welding my custom stuff on these and don't feel bad about it
Where can I buy a similar ultrasonic carb cleaner, and what should I expect to pay? Great video BTW. Thanks
You can get a small 2 Liter ultrasonic cleaner for about $134 here: amzn.to/2Jwoi4r
Or the 6L cleaner for larger items
I use this for ATV and Harley Davidson carburetors, it's about $265 Canadian
amzn.to/2HGjjIv
After using Ultrasonic cleaners myself, they are absolutely worth the money as they clean carburetors professionally!
Nothing else compares to an Ultrasonic cleaner.
Hi, where can we buy the Indo 701? I'm in Ontario, Canada. I already have a 1 liter Ultrasonic cleaner.
Pogimo I got mine at a small engine repair shop, you could try a Canadian tire, or maybe a princess Auto. Even an industrial supply store.
Just ask for a concentrated degreaser!
Great video ,these china engines have poor metal quality. Hard to find engine parts as well.
Yeah this thing is junk lol almost killed myself on it and didn't even get it on video lol
Is it okay if I just rinsed it with water😭
Definitely not, they need to be cleaned out good!
whats the name of carb.
Stater chain fell off just take the cover off and you’ll see
Most Chinese ATV carburetors are non adjustable, FYI YOUR DEALER will tell you its out of warranty if carb is messing up, BUT LOOK INTO YOUR OWNERS MANUAL UNDER FEDERAL ADMISSIONS WARRANTY!¡!!!!!! COVERS IT FOR 30 MONTHS AND BUNCH OTHER PARTS, THIS GOES FOR CARS, TRUCKS, BIKES , ALL MOTORS IN USA.
Nice video but is like 15 bucks a new carburetor !!!!!!
Man. You got so many things incorrect once you go to the ultrasonic cleaner.
Step #1: Take carb off
Step#2: Throw that junk pos knockoff away / burn it
No reply unsubscrbed