Woodturning - Simple projects that SELL!!!!

In this woodturning video, I turn some red oak into cocktail/beverage smokers. The mesh netting is at obtained at this link: amzn.to/3qVkh0a
I then use my Laserpecker 2 to engrave one of them.
amzn.to/45xNb5K
Black Diamond Affiliate:
blackdiamondpigments.com?sca_ref=439761.Bi5Jr2v7Cg
Starbond Affiliate link and Coupon code:
www.starbond.com/?rfsn=544319...
15% Discount - DoubleD15
Brad's Abrasive Paste and Tung Wax
www.etsy.com/listing/83446238...
Buy Me A Coffee
www.buymeacoffee.com/Tournage...
*Some of these links may be affiliate or sponsor links. Any potential purchasing or even clicking on these links will help support us to make even better content.
Tools I use:
Cyclone - amzn.to/3yOO5tT
Wen Air Filtration Unit - amzn.to/3khVdej
Wen Dust Collector - amzn.to/36u7KTu
PowerTec Dust Scoop - amzn.to/3AMen1r
PowerTec 1 Micron Filter Bag - amzn.to/3hx4kFY
PowerTec Floor Sweep - amzn.to/3xyve62
Blast Gates - amzn.to/36uahNM
LED Garage Lights - amzn.to/3xwAze9
Yellowhammer Bowl Scrapers - amzn.to/2VoHCHr
Rikon Slow Grinder - amzn.to/3xyvJNs
Bucktool Belt Sander - amzn.to/3yDvTmG
Hollowing Tool - amzn.to/2VksKtC
Headset - amzn.to/3hZSu6n
Rikon Carbide Set - amzn.to/2VuMHhy
Lathe Tool Rack - amzn.to/3k3Votf

[@Phenrica]

Never heard of a cocktail smoker before, looks like a great little project 👍

[@TournageDubois]

Thank you kindly!!! They are great!

[@spindlesworkshop9744]

Cool

[@TournageDubois]

Thank you, Luie!

[@ScenicCityWoodturning]

I gotta get some of these done. I liked them since you first showed them to me. Great idea👍

[@TournageDubois]

Thanks, Mike!

[@WoodturningWithJohnMarro]

Nice turn this week Double D, thanks for sharing!

[@TournageDubois]

Thanks, John! Definitely easy. And they sell really well!

[@trurex007lee7]

Looks like an easy turn but great return on your efforts. Nice!

[@TournageDubois]

Yes it was! I appreciate the feedback!

[@WeeVal]

Awesome Double D and congratulations on you 2K! 😃

[@TournageDubois]

Thanks, Val! I appreciate that!

[@Chipswoodworking]

This is a fantastic project! Ive got some bits of whiskey stave that i might try getting into a block to turn into one of these. Would be a cool i think to smoke some whiskey using a smoker made from the barrel it was aged in.

[@TournageDubois]

I don't disagree with that idea at all!!! Sounds amazing!!!

[@Chipswoodworking]

@@TournageDubois Thanks for the idea and inspiration! Hopefully it turns out great

[@TournageDubois]

@Chipswoodworking would love to see it if it does!

[@clydeschuyler]

Just made a couple today from cherry. This was a great idea and thanks for sharing.

[@TournageDubois]

Excellent, thanks Clyde!!! Always fun to have a quick project that can be used to fund our shops!

[@BrickhouseCraftWorks]

Great project brother! Love the engraving!

[@TournageDubois]

Thanks, Seth! Always appreciate you!

[@STMwoodturning]

Never seen these before but seems like a really easy project. Stuart

[@TournageDubois]

Thanks, Stuart! They are super easy. They take about 10 minutes at the most!

[@williamellis8993]

Those are nice, Daniel. I'm not into craft shows but they are good for those who are. Congratulations on 2K subs.
Bill

[@TournageDubois]

Thank you, Bill! And congrats to you, for beating Huw!

[@TheMessyStudio]

Nicely done, DD!

[@TournageDubois]

Thanks, Billy!

[@DougMilleratWoodSpunRound]

Looks like a good profit margin piece. Well done.

[@TournageDubois]

Thanks, Doug! It is a pretty good margin. :)

[@TheKlondikeCraftsman]

Ive never seen one of these used but cool project! Congrats on 2K subs pal!

[@TournageDubois]

Thanks, Lewis! I did a short too, and showing being used in that one! They work great!

[@chrisjohnston2449]

I have never heard of this before. I will have to give it a try.

[@TournageDubois]

Yeah, they are super easy and quite popular!

[@chrisjohnston2449]

And what do you put in it to burn? @@TournageDubois

[@timponder7487]

Nev3r heard of these but a great idea thanks for sharing 👍 😀

[@TournageDubois]

Thanks, Tim! I got the idea from HodgePodge WoodWorks!

[@timponder7487]

@TournageDubois I watch them a lot too you guys have helped me a lot over the past few years

[@TournageDubois]

@timponder7487 glad to help out!!!

[@jimbrock8928]

Yes show us how it works

[@TournageDubois]

I have a short that I show how it works, but will make sure to do that in the future

[@haim1fraid]

it seems very nice maybe someone can load a video of using it?

[@TournageDubois]

Thank you for the feedback! I have a short on my channel that shows it being used near the end of that.

[@normagene514]

Clever idea……although I have to admit I’ve never heard of a cocktail smoker. Then again I don’t drink but for those who do I’m sure it’s popular. 😊

[@TournageDubois]

Thanks! I know people who smoke all sorts of beverages (not just alcohol). They are really simple to make!

[@AlbeTurner]

Thanks for the take-along sir. Appreciate your time and effort. I have an LP2. Assuming you’re using the phone app with yours I’m curious which app you’re
using? There are several. I’m using iOS (iPhone). Thanks again!

[@TournageDubois]

Thank you, Al! I have an Android, so I do use the app and it works great!

[@Hockeymyk]

hey do you have a video where you use the index on your fancy lathe? thanks

[@TournageDubois]

I don't yet, but I will in the future. I want to do a basket illusion bottle stopper, and that should be perfect for a smaller piece. Thank you for watching!

[@windsonghillranch4306]

Where did you get the metal incerts?

[@TournageDubois]

I got them from Amazon. There is a link in the description.

[@jimbrock8928]

Whst is a beverage smoker I use to drink but never smoked my drink lol

[@TournageDubois]

I never had until I had one in Florida! Definitely changes the beverage flavor!

[@robertcornelius3514]

Uhhh, I suppose I'm really dumb. Would have been nice to show us how it worked.

[@TournageDubois]

I have a short that shows how it works. If you want to watch that one. Thanks for the feedback, and I'll do that next time.