thank you! Thanks to your method, my back doesn't hurt anymore. It's lighter and easier to put on and take off. We also fixed an issue with the pivot axis shaking. Thank you so much for sharing such a great way. Liked and subscribed. :)
That is a sudden increase in production value! Great rig suggestion, great footage. Thank you for your innovative thought, this is incredibly important for us
Wow this is amazing!!! Do all those plates come with the vest? I just ordered the dual handle tilta float and it comes in a couple of days! This is so helpful since I mainly got it to help with support since my back hurts from holding the gimbal for long periods of time
This is really old video I've changed a lot of it since. Most of it comes with it but what I do now I just purchased an extra long menfrotto plate and combine them all with a harness
Fantastic. Thanks Voho Mat!! Looks like a couple other things are needed, like those 2 way carabiners. And would be good to see how you modded the shoulder harness. Also, which length belt. The link you put in the description is for the 30-35" (smallest). Thanks!!
Hey bro you honestly can use any two-way carabiners I just happen to have some old ones laying around so I didn't have a link. As of harness there's not much to it you just hook it up to your belt and run the rods through it and you good to go
Thank you! I have found that the tactical belt seems like it doesn't do anything for me. Is this intended mostly as a safety in case the velcro gets undone?
Hello, I’m from Taiwan. It’s a great remodel. Before I saw your video, I would rather continue to use the vest. Now I will remodel my float in the future.
Re rod length, how tall are you and do you find 18" rods are just right or could be longer or shorter for your height? Also, do find the rods take a lot of load? Any reason to think aluminum is better for these? Thanks and keep up the good work!
Hello, where can I purchase the plate you pick up at 0.11 seconds in the video? I don't believe its listed in the description. This is my last missing piece lol
That quick release is complete garbage I wouldn't recommend it it was some cheap Amazon crap but there is a good quality ones like that let me see if I can find a link
You forgot to mention getting spring hooks and showing how you put them on the vest. Also long long 1/4” screws, the ones you put a link for or not long enough. Without those things this setup doesn’t work. Two sets of 2x SMALLRIG 15mm Railblock Rod Clamps. I understand you don’t normally post how two videos and this one seems like you were testing out a new lighting setup, I just wished I knew what I know now. There were steps you skipped “mainly the spring hooks” that gave me hell when I attempted to do this for my float.
hey, buddy sorry you had problems. so the S-hooks are kind of optional because the float belt already has them in a triangle shape. about the long screws, I just add more screws option to the list, hope it works.
@@camerariggingmods9667 thank you for the extra tips. I meant to thank you for posting the video. Yes, I had some bumps in the road when trying to follow the video, but at least to posted a fantastic jump off point to help solve a major problem with the Tilta Float.
@@camerariggingmods9667 I actually receive the harness to day, but in the vidoe it looks like you've modified the rear straps to be shorter, adding different clasps to attch to the belt, that are mot listed in the comments.
@@CappsProductions because you will going to ask more questions and ask for links that already provided for everything you need in the description of the video, and it's hard to chat here. This is not design to share photos or explanation videos to help each other, that's why :)
@@camerariggingmods9667 I bought everything in the description, you just didn’t explain what you used where in your video. I also heard you didn’t include everything in your description because you had stuff “laying around”
Hey man, I just realized after being right at the end of building, that you didn’t include those legit connectors! Where you get them? The plastic ones are super gay!
thank you! Thanks to your method, my back doesn't hurt anymore. It's lighter and easier to put on and take off. We also fixed an issue with the pivot axis shaking. Thank you so much for sharing such a great way. Liked and subscribed. :)
❤️❤️❤️❤️
That is a sudden increase in production value! Great rig suggestion, great footage. Thank you for your innovative thought, this is incredibly important for us
just built it and it works really well
balanced on an alexa mini and lomo spherical which is on the heavy side.
amazing tip. Thanks sir!
Thank you brother!!!
Have you tried building battery Pendulum from my other video?
@@camerariggingmods9667 next on my list ;)
Awesome job man this is what the belt should have been from the beginning.
Thanks brother. This was not my idea so I can't take credit for it. But I tell you it sure work's very well!!!
Found it! Ordered through your links in description. Made easy… BOOM!! Thank YOU.
Maaa man 🔥🙏❤️
Still looking for float remote Extention video. Is ther one? Thank YOU
@@DroseMr add me on FB bro I'll send you some vids @Vaho Mat
This is great!, just ordered my float should be here tomorrow, This vest mod will be CLUTCH!
Jesus. You ordered your float and the thing got in your house next day???????? My god what tilta have done to me 6 months of waiting now :(
@@ruancarlodop Lolol it was more like 4 days, ordered mine on B&H no delays at all
Wow this is amazing!!! Do all those plates come with the vest? I just ordered the dual handle tilta float and it comes in a couple of days! This is so helpful since I mainly got it to help with support since my back hurts from holding the gimbal for long periods of time
This is really old video I've changed a lot of it since. Most of it comes with it but what I do now I just purchased an extra long menfrotto plate and combine them all with a harness
Thank you for your great content and for sharing that helpful and easy modification!
This is much better than I was going to do, was going to use a piece of 80/20. Great job!
I got new video on same subject. Look above on this channel
Fantastic. Thanks Voho Mat!! Looks like a couple other things are needed, like those 2 way carabiners. And would be good to see how you modded the shoulder harness. Also, which length belt. The link you put in the description is for the 30-35" (smallest). Thanks!!
Hey bro you honestly can use any two-way carabiners I just happen to have some old ones laying around so I didn't have a link. As of harness there's not much to it you just hook it up to your belt and run the rods through it and you good to go
Thank you! I have found that the tactical belt seems like it doesn't do anything for me. Is this intended mostly as a safety in case the velcro gets undone?
Yes specially if you bigger person
Brilliant mate! Keep up the excellent work!
THANK YOU SO MUCH OMG was looking for this
Any time my friend ❤️
Hello, I’m from Taiwan. It’s a great remodel. Before I saw your video, I would rather continue to use the vest. Now I will remodel my float in the future.
Would you recommend 18" or 20" for the rods?
Re rod length, how tall are you and do you find 18" rods are just right or could be longer or shorter for your height? Also, do find the rods take a lot of load? Any reason to think aluminum is better for these? Thanks and keep up the good work!
My dude this is amazing! Links to the straps for the shoulders ??
It should be in the comment section and thank you sir
Hello, where can I purchase the plate you pick up at 0.11 seconds in the video? I don't believe its listed in the description. This is my last missing piece lol
It's part of the Float brother of comes with it.
Thank you so much!! Just ordered everything to make the upgrade. Do you have a link to that blue quick release on the front for the arm?
That quick release is complete garbage I wouldn't recommend it it was some cheap Amazon crap but there is a good quality ones like that let me see if I can find a link
amzn.to/3mRidkT
@@camerariggingmods9667 I'll try that one out thanks!
Noob question here. but what's the purpose of this quick release?
Great video ,but I can't seem to find the list of what you've used, in the comments, any help please. 😀
It's in video description my friend. I just checked it it's still there.
@@camerariggingmods9667 is it cuz I'm on my phone that I can't see it then?
@@camerariggingmods9667 ok just fund it thanks 😊 👍
You forgot to mention getting spring hooks and showing how you put them on the vest. Also long long 1/4” screws, the ones you put a link for or not long enough. Without those things this setup doesn’t work. Two sets of 2x SMALLRIG 15mm Railblock Rod Clamps. I understand you don’t normally post how two videos and this one seems like you were testing out a new lighting setup, I just wished I knew what I know now. There were steps you skipped “mainly the spring hooks” that gave me hell when I attempted to do this for my float.
hey, buddy sorry you had problems. so the S-hooks are kind of optional because the float belt already has them in a triangle shape. about the long screws, I just add more screws option to the list, hope it works.
@@camerariggingmods9667 thank you for the extra tips. I meant to thank you for posting the video. Yes, I had some bumps in the road when trying to follow the video, but at least to posted a fantastic jump off point to help solve a major problem with the Tilta Float.
Hi where did you get the Second plate ?, thank you for sharing !
It comes with your float
@@camerariggingmods9667 Thank you !! I think my tilta is missing that plate, I will contact them.
@@gatosoul you should have a 1. Belt. 2. manfrotto looking plate. 3. Back support
@@camerariggingmods9667 Thank you so much
are all these parts sold separately? Do you have a bundle that can be purchased as one?
I made it as easy as possible to shop all of it on Amazon. But I don't have a bundle deal or anything brother, sorry
@@camerariggingmods9667 no worries! just wanted to make sure I bought everything I needed. thank you
Great vid bro! Greetings from brazil!
Hello my friend
What are the clasps you're using on the back
All the parts listed in the description
@@camerariggingmods9667 I actually receive the harness to day, but in the vidoe it looks like you've modified the rear straps to be shorter, adding different clasps to attch to the belt, that are mot listed in the comments.
I have no earthly idea which screw you used where
Hey buddy, join our Facebook group and ask the same question. My name is Vaho Mat tag me and I'll help you out.
@@camerariggingmods9667 why don’t you just tell me here?
@@CappsProductions because you will going to ask more questions and ask for links that already provided for everything you need in the description of the video, and it's hard to chat here. This is not design to share photos or explanation videos to help each other, that's why :)
@@camerariggingmods9667 I bought everything in the description, you just didn’t explain what you used where in your video. I also heard you didn’t include everything in your description because you had stuff “laying around”
Found em! I paused on the tv and read. Anyone looking they are called Nite Ize S-Biner MicroLock they are 6 bucks for a set of 2
Show me what are you talking about my friend
Hey man, I just realized after being right at the end of building, that you didn’t include those legit connectors! Where you get them? The plastic ones are super gay!
나도 당장 셋팅하고 싶다. 어깨 매는 파츠는 어디서 사야 할지 모르겠다
링크를 공유 좀 부탁 드린다
이 링크를 시도하고 작동하는지 알려주십시오.
m.alibaba.com/product/60794608874/Black-small-size-Tactical-H-harness.html?__detailProductImg=https%3A%2F%2Fs.alicdn.com%2F%40sc04%2Fkf%2FHTB1KR.UrTtYBeNjy1Xdq6xXyVXah.jpg_200x200.jpg
Please brother ☺️ if you can drooop alllll links in comment section ;) bless you float bro 👍🏻
Hey buddy ☺️ they are In comments