Thank you very much for your settings, these are highly appreciated. I am currently making the step from console to PC. I was looking for FFB for the mentioned games and wheelbase. I am using your GT7 settings and like them a lot (still trying to find/tweak the settings for Forza after the switch from CSL DD). I have two questions, where you maybe can help. * What wheel diameter are you using with these settings? I am on a 33cm round wheel/hub and the 30cm McLaren. And I think the diameter and wheel weight makes a noticeable difference. At least it did on the 8nm DD). * I am planing to focus on AMS2 and fFactor2 for the start on PC (also installing AC, ACC). As for the Steam sale right now, would you recommend the buy the complete DLC pack for rFactor2 or just start with the base game? Thanks in advance.
I may have a completely stupid question, but do you change your Fanatec settings every time you turn on a different game ? Or is it possible to create profiles for games in Fanatec settings as well. If I understand correctly it's different from the settings in FanaLab.
@rob.lcs666 you can set different profiles for different games, and just switch profile when you play. You can do this in the fanatec software, and on some fanatec wheels.
Yes,l would like to say thanks when it comes to setting Ingame settings Which fanatec wheelbase Do we Assign Custom ? DD1 ? I got my new CSDD Plus on the podium DD1 with formula V2.5 Can you post your Ingame Gain-65 FX- 0 LF B- 0 MSS- 0 Does fanalab settings take care of the above settings !! Yes..? I understand that my settings the ingame FFB/Gain -on my wheel So to adjust it for high downforce Thanks again hope we can clarify the above question Best regards Mark
Fanalab is only enhancing the feel mainly at speed, to give better wheel stability at speed, and does not change "in fame" settings. My AMS2 in game settings are in the video.
Ok got it all figured out now thanks l appreciate Just one more thing I select Hardware- Fanatec When Wheelbase-Podium DD1 & formula V2.5 wheel Is that correct !! Just want to make sure I select same as you.As l like you am running ClubSport DD Plus 15Nm Thanks again P.S can’t wait to try out Asseto Corsa l spent some time installing quite a few mods mostly tracks and car’s skins the community is great 👍
As all ready stated you will have to turn down FFB gain for high down force cars if these settings are ok with other cars on PS5 use them But he did say PC but no harm in trying them if PS5 lets you switch an down & up switch so you can turn FFB gain up down pre car try ingame settings Gain-65 LFB -0to5 FX - 0 MSpring strength-0 Try test race moving one at an time to see how it effects your game in PS5 Sorry l on PC to But if l was on PS5 l would try the above 👆 Also see if fanatec has updated there forum yet with Recmmed settings for PS5 For AMS2
@aubreycolemanracing Yo, thanks for your help. I'd like to leave this here incase anyone else has this issue. First you need to change wheel to 90 degrees in fanalab, then it'll let you edit assignments. Thanks again, you're videos are truly appreciates. ❤
Thanks. Will try your settings for ACC. Love ACC and looking forward to FullForce on ACC for my DD+
Best feeling on gt7 with the rf2 settings thank you so very much, I'm using the F1 podium wheel.
Time Stamps:
0:00 - Intro
02:15 - Automobilista 2
05:10 - Assetto Corsa
08:05 - Assetto Corsa Competizione
09:40 - Raceroom
11:23 - rFactor 2 (Le Mans Ultimate)
Thank you very much for your settings, these are highly appreciated. I am currently making the step from console to PC. I was looking for FFB for the mentioned games and wheelbase.
I am using your GT7 settings and like them a lot (still trying to find/tweak the settings for Forza after the switch from CSL DD).
I have two questions, where you maybe can help.
* What wheel diameter are you using with these settings? I am on a 33cm round wheel/hub and the 30cm McLaren. And I think the diameter and wheel weight makes a noticeable difference. At least it did on the 8nm DD).
* I am planing to focus on AMS2 and fFactor2 for the start on PC (also installing AC, ACC). As for the Steam sale right now, would you recommend the buy the complete DLC pack for rFactor2 or just start with the base game?
Thanks in advance.
Just change the per car ffb gain according to feel, of your wheel.
I may have a completely stupid question, but do you change your Fanatec settings every time you turn on a different game ? Or is it possible to create profiles for games in Fanatec settings as well. If I understand correctly it's different from the settings in FanaLab.
@rob.lcs666 you can set different profiles for different games, and just switch profile when you play. You can do this in the fanatec software, and on some fanatec wheels.
What setting would you turn down if you wanted the wheel to be a little bit less weight? But still keep as much details as possible.
You could try turning down damping in fanatec software, but if you have over each setting in fanatec, it tells you exactly what it does.
Maybe just a screenshot of le mans ultimate in game ffb settings.
Right lol
Yes,l would like to say thanks when it comes to setting
Ingame settings
Which fanatec wheelbase
Do we Assign
Custom ?
DD1 ?
I got my new CSDD Plus on the podium DD1 with formula V2.5
Can you post your
Ingame
Gain-65
FX- 0
LF B- 0
MSS- 0
Does fanalab settings take care of the above settings !! Yes..?
I understand that my settings the ingame FFB/Gain -on my wheel
So to adjust it for high downforce Thanks again hope we can clarify the above question
Best regards Mark
Fanalab is only enhancing the feel mainly at speed, to give better wheel stability at speed, and does not change "in fame" settings. My AMS2 in game settings are in the video.
Ok got it all figured out now thanks l appreciate
Just one more thing
I select Hardware- Fanatec
When Wheelbase-Podium DD1 & formula V2.5 wheel
Is that correct !!
Just want to make sure I select same as you.As l like you am running ClubSport DD Plus 15Nm
Thanks again P.S can’t wait to try out Asseto Corsa l spent some time installing quite a few mods mostly tracks and car’s skins the community is great 👍
@TheSimRacingRoom_Mark-B I'm pretty sure you can set it on custom, or a fanatec wheel, as long as you map and calibrate your wheel before use.
How much of these can be transferred into the Clubsport DD (non plus) as that's the wheelbase I'm getting
Should work just fine, not alot of wheel force difference. Try it.
thanks for these, I have it on PS5, ACC, can't understand how you can have 100% ffb and 60 Gain. Incredibly heavy for me (formula 2.5 steering)
These all for pc only.
As all ready stated you will have to turn down FFB gain for high down force cars if these settings are ok with other cars on PS5 use them But he did say PC but no harm in trying them if PS5 lets you switch an down & up switch so you can turn FFB gain up down pre car try ingame settings
Gain-65
LFB -0to5
FX - 0
MSpring strength-0
Try test race moving one at an time to see how it effects your game in PS5
Sorry l on PC to
But if l was on PS5 l would try the above 👆 Also see if fanatec has updated there forum yet with Recmmed settings for PS5
For AMS2
How do you set FFB per car in Le Mans Ultimate ? I cant seem to find that setting.
It's in the same area as the main setting. I'm pretty sure, I'll have to check though.
iracing ffb?
@@jaimegonzalez5251 no sorry, can't afford it!🤣 I'll do it one day, I'll get back to iracing soon.
Was the wheel base recognized in AMS2? Mine isn't showing at all.
Yes, no problems. Make sure you map the steering first.
I've tried 3 wheels and all profiles. When I turn the wheel, it doesn't recognize it.
@@gruffchris2884 Have you tried the base in compatibility mode first?
@aubreycolemanracing Yo, thanks for your help.
I'd like to leave this here incase anyone else has this issue.
First you need to change wheel to 90 degrees in fanalab, then it'll let you edit assignments.
Thanks again, you're videos are truly appreciates. ❤