Creality Sonic Pad The Next Level of Printing
Вставка
- Опубліковано 17 гру 2022
- The Creality Sonic Pad is a must-have if you have a compatible FDM printer. The increased speed without sacrificing quality, combined with the ease of setup and calibration, as well as the included accelerometer for tuning the input shaper and acceleration, makes it a clear winner.
Control up to 4 printers with a single Sonic Pad
Sonic Pad Specs:
CPU: T800
RAM: 2GB
ROM: 8GB
USB 2.0 interface: 4
Screen resolution & size: 1024×600 & 7-inches
Wi-Fi protocol: IEEE 802.11b/g/n
LAN interface: 100M
G-sensor interface: PS/2
Power interface: DC 2.5
Input voltage: 12V
firmware and Cura profiles:
www.creality.com/pages/downlo...
more info here:
shrsl.com/3uh7h
Ender 3 S1 Pro:
shrsl.com/3uh7i
Ender 5 S1:
shrsl.com/3uh7k
Ender Series:
shrsl.com/3uh7m
CR series:
shrsl.com/3uh7o
Inquiries cooperation contact:
Will Zoobkoff - StudioZombie3d
studiozombie3d@gmail.com
linktr.ee/Zombiej79
/ zombiej79_3d
/ will.zoobkoff
vm.tiktok.com/ZMLsvq3Rh
/ studiozombie3d
/ 3350214868601401 - Наука та технологія
Grab the Sonic Pad here:
shrsl.com/3uh7h
Need a compatible printer?
Ender 3 S1 Pro:
shrsl.com/3uh7i
Ender 5 S1:
shrsl.com/3uh7k
Ender Series:
shrsl.com/3uh7m
CR series:
shrsl.com/3uh7o
Great video Will! Hopefully “Santa” drops one of these under the tree. Happy Holidays!
Another one of Will's awesome videos. Now I have to think about adding a creality printer to my home (currently using a Vyper)
You can run klipper on the vyper the pad will work with it I'll try and get a video together with the vyper and the pad
Great video! 👍
Thanks Will, your prints look amazing indeed. Got klipper running on my Tevo Tornado but haven't done the input shaper thing. The pad looks and works amazing. Really considering it now
It's a great system the Input shaper definitely helps a ton
@@studiozombie3d thanks i think I buy an accelerometer now and connect it to my Pi to try that first
@waltervanwaard336 just be sure to get a ADXL345 sensor and your good to go
Can u show how sonic pad works on and with vyper and how to install tutorial
ty
Can you link that tiny powered screwdriver?
I'm a bit confused hope you could help, when it comes to the first step in getting the pad level, where the knobs need to be tightened up, do you actually do that part? Also, on the auto leaving part, what numbers are you looking for to get to know you have a great level? I'm need to printing, just trying to get a bit more info. I'm actually really excited to get it going.
I’m still new to this but when it came to the four corners I just hit stop and skipped it and then let it continue on. Let it do the bed mesh and then go back and set the Z-offset with a piece of paper or a feeler gauge. Then I went back to the four corner part and just loosened my bed springs until the feeler gauge just barely slid out. Then go back and re-run the bed mesh. After that it was good to go. The pad has made my printer so much better I wouldn’t hesitate to buy it again. I hope this helps.
Could you tell me what version of the firmware was running on the Ender 5 S1? When I put 1.0.6 on my 5-S1 it crashes when auto bed levelling and gives error code E203. Creality have been no help whatsoever.
What screw driver are you using?
Any word on when the filament run out sensor will be better implemented? Ran out of wire and had to scrap the print because the sonic pad couldn't restart.
I'm not sure I'll get ahold of my contact at creapity and see if I can find out
Um....how do I know which ender 3 s1 pro model to use?? I can't find those 2 choices anywhere
Check the firmware version on the printer screen it should have a letter which identifies which board is in it
Assume video. where can i get info on the bracket for the accelerometer?
www.creality.com/pages/download-creality-sonic-pad
They have several versions of the bracket here
@@studiozombie3d Thanks
Hey Will, great video, i have a few questions for you. The Sonic pad can handle up to 4 printers does that also mean 4 cams as well? can a USB hub be used to add the cameras or have a single USB cable to the Pad and all printers connected to the hub?
Right now you can go 4 printers no camera or 2 and 2 or 3 and 1 I haven't tried a usb hub myself I'll dig one out and see if it works with it and let you know
@@studiozombie3d Thanks mate much apppreciatedd
Has anyone here connected a pad to an Ender 5 Plus? How much faster can you print and do you need to do anything other then use this pad? Do you need to change slicer settings or slicer profile settings?
Generally with the pad and klipper ypu can get 2 to 5x the print speed and keep the quality. My ender 5 s1 runs up tp 250 clean with the pad. Creality has suggested profiles in the link in the description.
All this device provides is the PIN mapping for your board. Everything else is test & tune like a self install. But with more problems due to cut admin permissions. Just use KIAUH installer on any computer.
How do I get to the web interface
On the pad click configure and network it should tell you the ip address of the pad. Enter that address into the address bar and it will load
after inserting the SD card into the printer (s1) it bricks my machine. I have tried twice and had to reinstall the original firmware each time due to it making the printer inoperable.
If you are using a Creality Ender S1 series, are you sure you use the image for the right processor? There are two types, and using the wrong processor type can indeed lead to a "frozen" printer. Also - Keep in mind that after installing the firmware, you HAVE to use the Sonic Pad, because the display on the printer itself is not working with the Klipper firmware. You cannot longer operate the printer without the Sonic Pad. In short - The printer looks like frozen if you don't connect the Sonic Pad, but in reality it's waiting idle until that Sonic Pad is connected.
@Jclosed I am using an Ender 3 S1 and removed the bottom plate to make sure I had the right board for the right firmware. I followed the instructions and multiple videos thoroughly but the sonic pad would never show its loading screen. I returned the sonic pad and installed the professional firmware on the machine. I'll try a raspberry pi at some point. Thanks for the tips though.
@@BooperTrooper912 Ah - That's really bad. Well - I am going to try in a few day's, so let's hope it will go better on my Ender 3 S1.
Until now I am using a Raspberry Pi 400, and used Octoprint. I wanted to give Klipper a run and was reading in, but then saw the Sonic Pad would be a short-cut for that. If it does not work, I can always go back to the original plan. I mean, after a long time tweaking and compiling Marlin firmware it should be not too difficult for me...
Anyway - I hope you are more lucky this time...
@@jclosed2516 I hope it goes well for you. I will say I am happy with the upgraded firmware but I would like to monitor things remotely. Right now I have an old baby monitor camera watching things while I'm home lol.
Do you know if it will work with the Ender 6?
It is compatible with the ender 6
@@studiozombie3d thank you