Woodturning with Melted Crayons!!
Вставка
- Опубліковано 11 вер 2024
- #woodturning #crayons
This week I turned a silver maple bowl and melted crayons around the rim. To secure the crayon wax I used resin over the wax.
My Etsy Shop: www.etsy.com/shop/PFwoodturningCo
Patreon: / 2835716
Micro-mesh pads: amzn.to/2xDBRGP
Larger Micromesh Pads: amzn.to/2HrRN44
Hut High Gloss Pen Polish: amzn.to/2JxxWB1
Woodturning Tools and Equipment:
Laguna Revo 1836 Lathe: amzn.to/2YOreMN
Robert Sorby Turning Tools: amzn.to/2Y0TA74
Carter and Son 5/8 Bowl Gouge: amzn.to/2W5Mn3S
Carter and Son Skew Chisel: amzn.to/32dj8zf
Ron Brown's Universal Setting Jig (for getting proper degrees when sharpening tools)
amzn.to/2W5HVlo
Easy Wood Tools: amzn.to/2Y1bGWE
Face Shield: amzn.to/2Fhoi4j
Center Finder (great tool): amzn.to/2W4wt9J
Bullseye Round Center Finder 10": amzn.to/2FdR19f
Wood Moisture Meter: amzn.to/2OaRqx8
Jet Air Filter for Shop - A MUST have: amzn.to/2TNE1RS
Bowl Sander Kit (I use this all the time, great product): amzn.to/2Y2wA7K
My newest addition - Dewalt Planer - LOVE it!: amzn.to/2FitIMD
Resin and Pigments:
Total Boat Resin: amzn.to/2XVmjKm
Total Boat Resin Quart Kit: amzn.to/2LcKPRO
Black Diamond Mica Powder Pigments: amzn.to/2XVn4Dc
Pearl Ex Powdered Pigment - Micropearl: amzn.to/2Y5BY9Z
Pearl Ex Powdered Pigment - Emerald: amzn.to/2Y0nEQl
Pearl Ex Pigments Metallics (Set of 6): amzn.to/2FdkMa7
Pearl Ex Pigments (Set of 32): amzn.to/2O7r3Ii
Tuck Tape (good for resin work, will not stick): amzn.to/2ubOVRX
Porter Cable Heat Gun (To pop resin bubbles): amzn.to/2UA1GBo
Sandpaper: amzn.to/2Ff4gYc
Milliput: amzn.to/2Y4aHEP
Starbond CA Glue: amzn.to/2O6wszi
Starbond CA Glue Heavy Thin: amzn.to/2HuL1dW
Other:
Sanding Sealer (awesome stuff!): amzn.to/2u97tlY
Dewalt Orbital Sander: amzn.to/2T8TpTz
Workbench Kit (easy build and sturdy): amzn.to/2OhFXMt
Nova Chuck - Super Nova: amzn.to/2FgQa8J
The BEST paper towels for woodturning!: amzn.to/2O9Fb43
Anchorseal 2 - Green Wood Sealer: amzn.to/2HEHeeH
Montana Crackle Spray Paint - Black: amzn.to/2LD2cP6
Montana Metallic Effect Spray Paint - Black: amzn.to/2GYxJ8G
Acks Sanding Paste: www.ackswoodpa...
Milliput - Black: amzn.to/2ucLYAJ
Sandpaper: amzn.to/2Ff4gYc
Milliput: amzn.to/2Y4aHEP
Conway Air Purifier (I use this in my house, in case any allergens come up from basement shop. This thing is great, especially if you or someone you live with has any allergies)
amzn.to/2TdWXUm
Contemporary Woodturning Book (great book): amzn.to/2UFuhp9
Video Equipment:
Canon DSLR for Recording Videos (a great camera too!): amzn.to/2T7eYE5
Joby Grip iPhone Holder for filming: amzn.to/2FiNTdp
Mic Stand (I use for mounting iphone /joby grip when filming--great product and not expensive)
amzn.to/2O8cXXl
Thread adapter for mic stand (to mount iphone): amzn.to/2TeT69M
Light for filming - 18-inch ring light - dimmable: amzn.to/2Y3n4B9
~-~~-~~~-~~-~
Please watch: "Woodturning | Walnut Salad Bowl (cracks filled with resin!!)"
• Woodturning | Walnut S...
~-~~-~~~-~~-~
Now that's something I would have never thought of Peggy. It turned out awesome. Great job.
Thank you so much!
No that’s a very unique pretty bowl I like the colored part that you did with the Kranz I thought that was a unique way of doing something different and it looks really good thank you for teaching me something new I appreciate it god bless
Thanks!
The ideas you come up with, and the end result are truly impressive Peggy! Thanks for showing all of us. 🤗🤘👍🏻👊🔥
:-) thanks.
Your beautiful work is so relaxing and peaceful.
Glad you enjoy it!
Again a beautiful job. Nice idea. Also fantastic grain. Most beautiful!
Thanks, Ward.
Glad to see there are female woodturners, for a while I thought it males only. Your work is lovely!
Thanks 😊
Beautiful bowl. Very nice job. Thanks for sharing!!
Thanks!
Great bowl. Love the crayon idea. Beautiful. Size too.
Thanks 😊
Fun video and beautiful bowl.
Thanks!
Love what you did with the melted crayons in the rim. Beautiful.
Thanks so much 😊
A very nice bowl and the use of wax crayons and resin was an eye opener, may have to steal that idea.. thank you
No problem! I'm sure I wasn't the first person to do it! Thanks for watching!
What a cool idea. I love it.
Thank you!!
I love the creativity. Keep it up.
Thank you!
Excellent work
I like it.
Many thanks
Thank you! Cheers!
Good looking bowl Peggy!
Thank you!
Simply amazing!
Thank you! Cheers!
I liked the 2001 Space Odyssey video affect!!
Ha!!! Me too!
Fantastic bowl
Thanks a lot 😊
That looked like it would be fun to make..gotta try this soon...good idea
It is fun! Happy turning!
Gorgeous piece of wood!
Thanks for watching!! Happy Thanksgiving!
That's pretty cool!
Thanks!
Love it!!!!!!!!!!!!!!!
Thanks!
New video every week--don't forget to subscribe! Cheers!
That's great, Peggy. The way you used the crayons is something I've not seen before but gives a super effect. Your new effects are interesting. Keep trying them and I'll let you know what I think as I see more.
Thank you. i appreciate it!
Great job 👍 looks great 👍
Thank you.
I could wax lyrical but I won’t 😂. Good job.
✌
Muito legal os seus vídeos. Estou aprendendo muita coisa com vc. Faça sempre peças lindas e criativas assim!!!
Thanks for watching.
That is so cool. ✌🏻 out!
Thanks 😊
Nice crayon bowl, I like the effects. Good Job as always! Two thumps up.
Thanks!!
Very nice bowl. Greetings from Belgium
Hi Stan! Thanks, from Maine, USA!!!
Very interesting and very creative! Nice work. Gil
Thanks, Gil!
Interesting idea and the end effect was okay, will give this a shot sometime. Really like how you show what you are doing with the turning tool and then explain the cuts. Super helpful. Big thumbs up for me and a new subscribe.
Thanks! Welcome to the channel, I appreciate it!
Very nice bowl looks good I like the grain
Thanks!
@@PFWoodturning you're welcome
Love that bowl Peggy...talking about the Aks sanding paste,I used to use Yorkshire grit until I can out...now I use acks,,,works great,and a lot cheaper...
Thanks! Ack's is awesome!!!
I like it, it came out nice. Gives me an idea though. If black wax was used, with a thinner edged trough, and let the wax melt and drip down the sides, then using the dremel cut away where the wax has dripped, then fill that with the coloured wax, t hen when do the same with resin to fill it up and give a harder surface for wear. Then finish the bowl off. I think it would make it look like the wax is dripping down the outside and inside of the bowl.
Thanks. Cool idea too!
That’s a really cool bowl. I like it a lot. The effects were fun. When I sand metal on my belt sander, I get shocked a lot lol. That lightening effect reminded me of that.
Ha! Thanks for watching! Stay safe!
beautiful bowl... LOVE that wood.
Thank you!!
My family really liked the black and white special effect. Crazy cool.
PS - Nice bowl!
Cool, thanks!
Peggy the crayons gave a cool effect to that rim. The blank had really nice coloring for silver maple as well, they complimented each other well. Thanks for sharing!
Thank you!
I like it! Looks like your wedding ring takes a beating, hope it holds together.
Thanks. Yeah, I should probably take my ring off, but I'm sure I would lose it if I did!
I like it. The wood has more figure than what you usually use. It's very pretty.
Thanks, Deb!
This is the first time I’ve been on your channel I really like your special effects but your wood turning skills are awesome
Thanks. Special effects I'm just trying out.
That's Beautiful Peace out
✌
I like that the color does not overpower the beauty of the wood.
Thanks!
Nice!
✌️
Cool!
tammy finch thanks.
I enjoyed this very much. Thank you for sharing.
Thanks, Dan!
The lightning effect might have been a bit much but I liked how the bowl turned out.
Yeah, I agree. Thanks for watching!
I LOVEE IT
Thanks very much!
Awesome bowl. Looking forward to seeing more. I just got a lathe and picking up a few tools. Have been watch a lot of your videos and picking up several tricks before actually starting. Thanks again!
Thanks, Gary!! Good luck with your new lathe....thanks for watching, I appreciate it~
Nice job peggy! Very creative! And i LIKE the new special effects! Your videos are some of my favorites to watch, listen to, and learn from. Keep up the good work!
Thanks, Dave. Much appreciated!
Very pretty, the crayons are a cool effect. I didn't care for the video lightening, maybe if it had followed the tool. I did like the black & white (pen drawing?) and the length of you used it was good.
Thanks!
Eu sou paraichonado por seu trabalho
Thanks!
Love the grain of this bowl! Good job.
Thank you! Much appreciated!
Cool! Like that negative/white effect towards the end. 🤙🏽🤘🏽🙌🏾
Thanks, Kei!
That grain on the bottom is awesome!
Thanks, I thought it was quite nice grain too.
A great bowl. Thanks for sharing
Thanks! And thanks for watching!!
Never thought of crayons, great idea. The bowl looks great. Camera affects I’m still not too sure about, glad you didn’t overdo it.
Thanks. Yes, new editing takes a bit to learn....
great video Peggy loved the idea of melting crayons, and the special effects were really good.Cheers Del
Thank you, much appreciated!
Beautiful, I really loved the crayon resin rim
Thanks, Justin!
NICE
Donald Redline thanks! 😎
Very cool, I'm going to have to try this! Thanks for the idea!
Thanks!
That’s one really cool bowl there Peggy, it looks the business.
Thank you, Andy!
Sweet
Thanks!
Greetings from Ontario, Canada. Very nicely done. The video effects were interesting. I suppose there are dozens in that software. Please work safe. I noticed you were wearing sandals in the shop.
Ahhh, yes, the sandals. I do need to wear better foot protection! Thanks for watching!
I love that idea and your commentary. I have to be honest though.. I would've liked to have seen the bowl being kept at the stage where the crayons had melted down tue inside. You obviously would've needed to epoxy the inside of the bowl that way, but it looked cool like that.
Thanks. And you have a point about the melted crayons down the side...for another project I guess!!!
i loved the outcome so much!!
Thank you!
Nice job peggy. I loved it
Thank you!
Cool effects. What type of sharpening devices do you use?
CBN wheel.
That’s much safer than how I would’ve melted the crayons…
😎
Awesome Peggy I like that a lot take care my friend god bless
Thanks much!
Умничка👍👍👍
Thanks!
great project, I have the crayons, but, as yet no heat gun.
Thanks, Ron!
Just found your channel of late and am enjoying watching you create. May I offer a little? I liked your idea of the crayons. It has been a year since doing this video, how has the resin crayon embellishment held up? I ask as wax is the best release agent for resin work. May I suggest using colored resin, you may need to thicken the resin a little, pouring the different colored resin into the same sort of recess you placed the crayons. Then continue with your process.
Thanks agin for your work and sharing.
Thanks for the tips!
I just found your channel and I love it. You do beaitiful work. Looking forward to more.
Thanks, Geoff.
Looks awesome. Nice to see someone else from Maine doing this on UA-cam I’m from Franklin Maine my self.
Hi there!!! Awesome, another Maine-ah! I used to live in Jonesport---so been through Franklin many times!!
I have family in jonesprt. My grandma was born on beals.
I’m related to the Frazier’s I don’t know if u know any of them. Lol
I don't think I do, but it's been a while since I've been back....
Great take on a crayon project, Peggy! I love the special effect at 1:40. I had never thought of doing that, but now I’m going to copy you!
Thanks, Rick! Glad you got your shop up and running, can't wait to see your next project!
Thanks for sharing
Thanks for watching!
Never thought of using crayons to that effect. Excellent finish and beautiful grain on the wood. The effects were a little distracting from the video, otherwise, EXCELLENT!!!
Thanks!!!
Looks really nice. Very creative ✌🏻
Thanks!
Muito linda parabéns
Thanks
Wow look great...thanks
Nice to meet u sis...🤗🤗🤗
I like this part...
#neverskip
#1000%support
Hi there. Thank you! Nice to meet you too! 👍🏻
Hi there. Thank you! Nice to meet you too! 👍🏻
Hi there. Thank you! Nice to meet you too! 👍🏻
Hi there. Thank you! Nice to meet you too! 👍🏻
Hi there. Thank you! Nice to meet you too! 👍🏻
First time viewer of your channel, and new subscriber. Novel idea with the crayons and I plan on 'stealing' that option. Nice grain and beautiful finish as well. Is the inside food safe or is this just a display piece?
Welcome aboard! It's foodsafe!
Crayon wax with epoxy cover is a very nice touch. For better control, I think I would melt each of them, then pour them in the groove. The video effects are interesting, but you may want to save them for the intro and wrap up, instead of interrupting the process part of the video. Glad you are trying new things!
Thanks. I did actually try melting the crayons separately first, this way just worked better for me. But it certainly can be done the other way and pour them in.
Great video, cool effects too. What editing software are you using?
Adobe Premiere Pro.
That’s awesome 👏🏻
Thank you!
Great Video 👍🏿
Thanks!
Did you add the resin while the crayons were still liquid or wait for them to dry first? I'd like to try this out but looking for more pointers since that part of the video is missing. Great piece though!
I waiting until the crayons were hardened.
Respect for women's
And nice work
🇵🇰
Thank you!
Muy bpnito te felicito por ese trabajo tan bonito👍👍
Thanks!
Great job
Thanks!
That blank looked like it was soaking wet when you started - you could see wood mud building up on the edge of your gouge. Did you dry it at all before applying the wax and resin? If not, aren't you worried about it changing shape and popping the resin out? Neither one is going to stick well to wet wood.
David Stranz it was wet, but not soaking. The turning was done slowly over a longer than usual period of time, to let dry out layer by layer.
@@PFWoodturning By the way, while most of the special effects were meh, I did really like the edge-detected B&W one - it let us see exactly the cut you were making inside the bowl.
The spark effect at the beginning had me thinking, oh no, she's getting into Lichtenberg burning and I'd have to unsubscribe.
@@roamingchemist2514 Ha! No lichtenberg burning!! Thanks for the feedback!
Hi love your work only recently discovered your channel. What exactly is the sanding sealer for?
To seal the wood, to protect from the elements/air, etc. Thanks for watching!
How come your bowl doesn't come flying off the lathe like mine do?
Ha! It might have happened to me once or twice on other projects.
Your Lovely Work Is Missing A Dated Seal.
Thanks!
Nice bowl turning! I like it!! Thanks for sharing.
For safety reasons, you might want to remove your ring while turning wood.
Thanks!
Really lovely bowl...the grain and the crayons are awesome! I have a bit of silver maple but haven't turned any of it yet!
Thanks, Carol! I had fun with this one.
Hi Peggy, Very nice effect. When you were turning the outside of the bowl were you using a 1/2" bowl gouge with a fingernail grind? I am still trying to learn! Your narration was excellent! Look forward to your videos.
Thank you! And thanks for watching!!!
Классный у вас токарник👏👍
Thanks!
Very nice.
Thank you!!
I like it! THE melted crayon would also be cool if "painted" over with epoxy and then simply polished. More ideas...
Thanks!!