Towing a Slammed BMW, and a Broken Toyota!
Вставка
- Опубліковано 10 вер 2024
- @YankumRopes - Get your Yankum Ropes Gear at:
Affiliate Link: yankum.com/?af...
Discount Code: towtruckdustin
@GuardianAngelDevices - Guardian Angel Device Referal Link: guardianangelde...
Coupon Code: 1575CLIP
Free Shipping and a Free Mount!
(Applies to device purchases over $99, when using the code).
- DG Trucking Supply
dgracingtechno...
5% Off Promo Code: DUSTIN5
I kept saying Dustin take over! I understand you are training, but we're sitting here. Watching and saying Dustin, you can get it done faster. You are a patient instructor. 😊
If he takes over the trainee won’t learn …..
Patient is the key when training someone,
@@nicholasquallo6291 At my age patience has left out the door
I agree 💯 percent
It takes time to train people
Good Monday morning! Be safe out there.
Dustin has a wealth of knowledge to pass onto the other new drivers so that is why he is being patient with them. Yes, i am sure he wants to just jump in and do it himself, but iof he did that the other two wouldnt learn just by watching. they need to do it themselves. Great training Dustin👍
Thanks!
The last moments on that mud for the flatbed before returning to the gravel was nail-biter for sure!
That was a tough one and while training the new guy. Great job Dustin!
Thank You!
Great video Dustin. Great job training 2 new guys at once. I hope they were paying attention and not just going through the motions. Maybe suggest to them the importance gloves. That steel cable hurts if it cuts your hands. Stay safe all tow operators.
Low and slow! Check to see if the blinker fluid is low, seems to be a BMW issue!
Now imagine the bmw still had its front bumper. Youd have no way of pulling it without breaking that bumper
Yep NONE WHATSOEVER! These kids are all about ‘stance’
When everyone else fails, Dustin succeeds!👍
Good job on training im starting my 2nd week on learning to drive and operate or heavy rotator.
Great video, great teaching as well,keep up the good work
Thank You!
@@Towtruck_Dustin you’re welcome
Loading lowered vehicles like that, are a pain in the ass! We had a Corvette months ago that was so low we needed more than just race ramps. We had to use small pieces of wood and lay them out in front of the tire as if I would lay in brick on the ground, one in front of the other. I like to use 2 4”X4”X36” with 2 skates flipped upside down for lowered vehicles.
Two major pains in the arse in a row!
Enjoy watching your expertise.
Be careful but you are doing a great job l am glad that you are doing it and not me
Never understood why so low, but that's just me. I lowered my 01 Cobra and speed bumps were a challenge.
As for the Tundra, great job training him, hope he retains the lesson.
Great video with the besf content. You are a very patient person 😊
I love that bmer owner that is the costumers should be
BMW what a fine cruiser it was, i guess, never drove one.
Gotta love that year Toyota huge huge problems with the LBJ
Great video, keep being the person u are
That BMW sounds like it has a diesel in it lol
Ether to start a modern BMW. Yeah that's got major issues.
He’s learning from the best!! 👍👍
Good job Dustin
Thank You!
The one thing I’d think about if I owned a bmw is how to get it towed since it’s going to need it often 😂
Tow truck Dustin you are awesome
Thank You!
Cool thanks 👍😊
It’s very kind of you to train for Donny. You are super knowledgeable. Michael needs to leave shirts that say things at home. Especially about strippers. It is funny, but he’s going to get himself in a situation when a customer doesn’t think so. That car owner has made an unusable car by lowering it so far.
If someone gets that butthurt over a tshirt, then they’ll get what’s coming to them.
Lmfaooo if someone gets offended by a hilarious shirt they need to stay in their basement 😂😂😂
Two great jobs
First time I heard it!
Bmw and honda it s static?
I know the Honda is on bags, the BMW should have been also.
The flatbed tow truck tows a Toyota truck because the right site tire won't turn so they go mechanic or tow yard.
🔥🔥🔥
Great video
Is Dustin the owner of angilton
No Donnie the one who owner towing.
thats a town in Texas
Hey Dustin, how many vehicles do you tow on a regular day?
Depends. On average 5-10 depending on the kind of jobs and the time of year
I have a name for a BMW bring my wallet break my wallet😂🤣😂🤣
New driver with doesn't look like any experience which honestly falls on the company. The way you handled that BMW was rough to watch. Not the correct way to use the boards when loading.
Watched
Thanks for watching!
👍✌️
Why would you take it out of gear and use a snatch block to bring the truck straight on the bed? If the back wheels are blocked and out of gear, the only way that truck can go is to the winch. Why make more work for yourself? The last video with the lowered BMW If you had put the emergency brake on and walked the truck out from under the BMW you wouldn't need the ramps. As a matter of fact gust throw that ramp in the trash, you would do better with two 4x4 6' long and two blocks and you can do almost anything. I carried the small bus and box trucks with just that.
You’re obviously not very familiar with common practices in the towing and recovery industry.
This was the most efficient way to accomplish this without causing any additional damage.
Doing what you said, would have resulted in more undue damage.
@@Towtruck_Dustin "You're obviously not very familiar with common practices in the towing and recovery inustry" All I can say is you must have a pxxs poor student in phisics class. I was in a flat bed for several years, Iwas tained that if the rea wheels if blocke . the only place that car will go to the winch. If the front wheel is dammaged like this the safest way, and easiest way to get the car on the bed you Iode is to get the rear wheels on the bed and block them. then let the truck roll under the car that way you are only pulling the car 4 feet, and the front end damage will be less. I have had a police tow with a car on its side i would have pulled it out to the street an loded it .but they wouldent let me go it so i had to lode it on its top. then unlode it to right it. Dont let any body tell you you cant roll a car or truck with a bed. After the 30 th time mi boss finaly adnited to me that you can. the fist time I was impresse with your abillity, now i think you are like 90 % of the tow rivers that you are as dumb as a rock to put it as delicately as i can. I've been on about 2,000 tows and it pains me when a so called tow truck driver works 45 min to lode a truck like this when it should take 5 min. What a wast of time.
@@alankrenek5366correct! I actually learned that from common sense, he knows what he’s doing… in sone of the videos I watch But def not all 😂
Hi Dustan & Micheal. I don't quite understand why the first car is so close to the ground. That's real low. Is there any benefit for doing that. Wowsers the new driver for your old truck 😮. Your old truck is not looking as good as she was. 😢. Stay safe see you on the next one 😊
people think its cool
Do you not have legal height limits for your vehicles? Minimum height here is 100mm (4 Inches). Any bit sticks lower than that then you have a canary sticker (unroadworthy... the sticker is yellow.... hence the canary) Vehicle can possibly be towed and you may need to get a full roadworthy certificate to again drive your Sh@tbox!. Seems like you guys have more rights than responsibilities. Yeah I'm going to be flamed!!!
I think that tire's aspect ratio is about 25-30%. Better watch out for potholes!
@@ronaldcooper7609 Not to mention round topped road/driveway entrances, and speed bumps.
It’s on bags. It’s not designed to drive around that low.
Ugh, slammed cars are ugly as hell.
I'm interested jump box in the type you use.
Lokithor J3250
@@Towtruck_Dustin thank's bro 🤩