Inside A BROKEN Milwaukee SAWZALL (Mechanical Failure)
Вставка
- Опубліковано 27 сер 2024
- Inside A BROKEN Milwaukee SAWZALL (Mechanical Failure)
We recently had a 10 year old Milwaukee sawzall lock up and start smoking, so we decided to open it up and take a look at the inside. The problem was a big mechanical failure with the internal gearing of the tool. Let us know your thoughts in the comments section below! Thank you for watching! - Навчання та стиль
Pretty cool vid Vince, as I’m the kid growing up that took apart all my mom’s appliances etc....to see how they worked. Hairdryers, toasters, KitchenAid Stand Mixer(wasn’t to happy w/ this one, Oops😂); and so on. Too bad didn’t get it up & running again, it think got your money’s worth; so that awesome👍🏻. Gotta add (I’m sure you know this, but for others who don’t....I’m adding it), the orbital slot cover is what broke, & it’s like $30 to replace, & the rubber insulator you cut off is $7. Appreciate taking the time to show us this, as I haven’t taken apart any of my Milwaukee Tools, or others....as I don’t need to.
Cheers Vince & Nick, thx for your hard work✌🏼
You’re a beast Aepek!!
CraftManGreg That’s Soo bad, but funny😉 👍🏻
Well sometimes you can't know what the failure is until you open it up. I like these types of videos
This is true, thanks!
Should have sent it to AvE! Might have gotten it back fixed LOL
That should have been a collaboration
Whatever ends up on the healing bench stays at the healing bench
More of these please!
Appreciate the autopsy on the M sawsall ! Am relieved to learn it was ten yrs old and much used.Just bought one, and it's nice to know what the innards of this contraption look like. Thank you !
I had same problem on same saw, I welded it back together n just got it going today, hope it lasts!
Hi seen your post that you welded it back together, I'm having same issue and I was thinking same thing. They sell the part for like 3 bucks. But mine was a clean break so I'm going to try to weld it. My question is how do you get it all back together again. All that stuff that is on the inside. Is there access to put the round guides and pin through arm. Is there a certain sequence I have to do to get it all working again. Thanks if you could help
Glad you found the issue! Thx for the inside look!
❤️❤️
Good job Vince. You know those parts probably do not cost a lot, and there is a Milwaukee store not to far from you. That saw is most likely worth fixing. Thanks for the look inside.
I waiting on a cost for the parts!!
I teally like your style because u disassemblied it and made me know what inside is and explain how it work. Thank you so much and look for another clip.
At 5:19 if you see where his fingers are, take that black piece apart and try to spin it with a torque if it’s not spinning, the gears are probably messed up if it starts spinning hard at first and then start spinning. Then there’s probably something in there but you can probably get it out if you just keep spinning.
Well... it lasted 10 years! Not tooo bad for a tool that usually takes a good beating. I am not concerned :)
👍🏻
Congrats on 109k bro! @VCG Construction... You are awesome! 💪
Thanks David we appreciate it!!
lol i was yelling at vince to take the shoe off first
I couldn’t hear you, wish I could have!!
Vinny looks like your sponsored by milwaukee. Workin on the red sawzall with the 2 red led lights lol. Only the best
🤣🤣👍🏻
Milwaukee dissected with a Milwaukee!! Yes!!
Yes, it's obsolete. So is a 1971 Chevy Chevelle SS 454 four-on-the-floor posi traction dual exhaust 2 door coupe! Still awesomely and freakishly COOL!! Thanks Vince. Oh by the way, nice touch with the power tool backing off screws instead of that.... other thing... Oh screwdriver! LOL Seriously, cool stuff and God bless! 😁👍✌
Interesting! Thanks for sharing.
Nice teardown
Thanks! This was a great video. I always enjoy watching your channel.
Thanks Maxb
You da man Vince !! Keep it up
Thanks Cuz!!
Dude- you are great! I'm in Hungary, Europe and I've got a Fuel model CSX made in Germany so not the same system, the lights are blinking and was just fixed ($240 repair), I'm taking it back to the service center this week... cheers1
That one don’t owe you a dime Vince lol......I think it’s worthy of the wall of tools” display😂
👍🏻👍🏻
Thanks Vince! Well done!!!
Thanks Karen we appreciate it
Great video vince
Hey Vince those lubricants aren’t appropriate for the task! Unbelievable! Lol
Lol dude you always make me laugh. Thanks for the good videos
Thanks Martin, we appreciate it!!
My Milwauckee M18 CSX only works for a second or two and shuts itself off. After that, the LED turns on and off 6 times with small pauses?
Also, when I press the switch sometimes the diode just lights up 4 times with a short pause and the saw doesn't work? When it appears, then I have to remove and insert the battery again (to erase the error) and then the saw works again for a short time? As far as I can see, the mechanics are correct.
I found the machine in the trash and saw replacement didn't work. I cleaned and lubricated the clamping head, but there is no metal support and maybe that is the reason for the failure (protection)?
Greetings from Switzerland
Hey Vince Thanks for the video. We should also see teardowns on Milwaukee fuel gen 2 impact for reapplying the lubricants.
lol I agree with the take apart your tools comment haha
Hey Vince ahora me siento identificado contigo tengo una manía jamás puedo tirar algo sin desarmar a ver que hay adentro y cómo funciona a veces los desarmo aunque estén buenos y los vuelvo a armar 😂😂
Vince getting down and dirty inside a recip saw to troubleshoot the deal. The deal appears to be a very broken recip saw. You won though and cheers to that !!!
Parts look to be fairly inexpensive to fix it!!
Knowing + looking good while doing it = full battle
I made this kind of stuff too is cool to see inside the tool and how the evolve over the years
Mine stops during use but then works again everytime. Thoughts?
Hey Vince random question. Have you ever carried a Leatherman? They have helped me in many situations. I know this doesn’t apply to the video but I’m just curious. I wear on on my hip with a sheath from R.A.E. Gear and I also have a knife I carry. I think it could benefit you in many ways. Never know when you need a quick pliers or any of the tools they have!
Vince, why didn't you use that Milwaukee 11 in 1 to tear it down? I went out the next day and bought one after I saw that review! Love that screwdriver lol.
Not thin enough to get in to reach the fasteners!!
Which is the best pressure washer???
So I got the m18 fuel and non fuel model hackzall both burned up the barrings for the end of the shaft the fuel one Iv had for maybe 6 months you can smell burnt grease on both but the shaft on the fuel got so hot it turned colors
Yesterday I repaired the saw (M18 FSX) that I bought for $1. The machine was dead and the diode did not light up when I connected the battery. I didn't believe that the light emitting diode had anything to do with the operation of the machine? The red wire from the LED was broken, and the white one had damaged insulation. I fixed the problem and the saw works like new. Maybe someone else has similar malfunction symptoms and maybe my experience will help someone?
Greetings from Switzerland
Yesterday I repaired saw (M18 FSX) that I bought for $1. The machine was dead and the diode did not light up when I connected the battery. I didn't believe that the light emitting diode had anything to do with the operation of the machine? The red wire from the LED was broken, and the white one had damaged insulation. I fixed the problem and the saw works like new. Maybe someone else has similar malfunction symptoms and maybe my experience will help someone?
Greetings from Switzerland
Defenitly got your money's worth brothers may it rest in peace
Cool vid vince now I know wats inside a sawsaw .
Send that thing to AvE for analysis on the healing bench!!
I want to see an autopsy of a gen 1 fuel impact driver.
Looks like the inside of a fishing reel
Love it my wet/dry vacuum went to shit after 5 months did the same haven’t fixed it
Warranty it online or take it to service center. They gave me a new fuel sds plus after i broke mine.
"I will say this" drinking game
10 years of professional contractor use. Now that is money wisely spent.
What is all the white residue were the battery slides in ? Did the tool get wet or do the battery terminals have corrosion on them as soon as you slid the battery off I can see that through the video ...if the tool is a 18v system can't it be tested without its original battery just like bench testing
I have the brand new super saws all. It locked up and lost power I was able to free the lock but the sauce still has no power however the small LED light does come on
New Channel!!!! VCG TEARDOWNS!
Teardown all the tools that don't make it thru the TTRs
Yo I need that motor out of there!! Hahaha!
Smashed and tapped brah
your getting closer to being AvE disassembling tools and all just need lots of dirty jokes and to hide your face.
🤣🤣🤣
Nah Vince has his own unique style too. It's basically summed up as
"I probably shouldn't be doing this or filming it but I'm going to any way , just for you guys and maybe we'll learn something. I might even fix it which would be cool, but if i don;'t whatever, it's old and been broken for years. What? You think I'm stupid enough to pull apart my good tool? You idiot Also, I don't care what grease you think I should use. Go fuck yourself. To everyone else, much love"
Or something like that... 😂😂
Love ya Vince!. Stay real brother! 👊🏼
Ave is the man!
But we already know what his face looks like
10 years isn't bad at all. If mine lasts that long i'd be happy. It cuts out all the time cutting camstrut and it's not binding up. I think it's some sort of abuse sensor or something, but it shouldn't trip after making a single cut through camstrut should it? I've used m18 fuel sawsalls and they don't cut out like my regular m18 sawsall does. Odd.
This guy reminds me of vince. I wonder how long before he returns
You should have cut it in half with a Dewalt recip saw.😂😂😂
🤣🤣
They just would have killed another dewalt trying to get through it
@@aaronrudd2690 actually you are more than likely right.😂😂😂
Some lube should fix it lmfao
The address to get fix my sawzall
If its broken you can't break it....
Interesting
🤔And here I thought you going to cut this old milwaukee Sawzall like you cut the old Dewalt Sawzall oh well and also play play play gameover old milwaukee 💣💥
Good video Vince! Just work on your Canadian accent and dirty jokes!😉
p.s. You need a healing mat.
🤣🤣🤣👍🏻
No cutting the rubber 😢😢
Yeah, I just got impatient!!
Had same saw the was on as soon as the battery was installed ended up having a broken finger on trigger lock mechanism removed it and back in business
👍🏻
Yesterday I repaired the saw (M18 FSX) that I bought for $1. The machine was dead and the diode did not light up when I connected the battery. I didn't believe that the light emitting diode had anything to do with the operation of the machine? The red wire from the LED was broken, and the white one had damaged insulation. I fixed the problem and the saw works like new. Maybe someone else has similar malfunction symptoms and maybe my experience will help someone?
Greetings from Switzerland