I'm not a plumber, but I am an HVAC technician and I have found I get the most leverage by pushing rather than pulling. (just a little tech tip). Thanks for the info, vids, and entertainment. God bless bro.
When Steve says “ glad the shutoff valve worked” you only know what he means when an old valve fails on you. These older valve specially the ones that don’t get use often get build up and when you close them they fail . I had to change my heater recently and all the valves including the main shut off valve failed and what a mess.
i finally got around to making my 5 gallon jug pan, and it went immediately under the rear axle of my truck so i could change the seal without decorating my driveway like i usually do. that was a great tech tip mama.
I have never put pipe dope on my compression fittings and never had an issue, them again I clean the pipe with sand cloth before installing one so my ferrule doesn’t sit on any grooves
I notice in the US the trap connecting to soil stack always below toilet base in floor. Here in UK we usually connect stack directly to rear of porcelain.
part 2? oh oh. pouring lead maybe? flange looked pretty good. floor wasnt rotted. i sure like those flange bolts. i never saw those before. i dont care for the mansfield tank to bowl rubber coated bolts. They leak after a short time. i have changed a few to flat washers and bolts. i sometimes will cram a little plumbers putty in the holes those old bowl to floor screws make just to keep the floor water tite. nice video
All I have to say is bless plumbers! As a carpenter I've done enough renos to know just how valuable it is having people that are willing to do this sort of stuff. My stomach isn't strong enough to do it myself unless it's my own toilet and pipes. Other people's funk is too much for me.
Случайно наткнулся на ваши видео,теперь смотрю многие из них,сам работаю сантехником. Интересно знать,как там у вас работается))) Удачи вам в работе и побольше хороших заказов!
It has something to do with water flush hitting the funnel and splashing back causing a potential leak over time... I think I saw him explain it a few years ago.
I'm curious about final bill. I'm guessing about 350? I do the same jobs as you. I like your suction tube. Did you make that? I tip mine from side to side in a fire gallon bucket get almost all the water out , then I slide the old toilet out in new toilet box.
Yeah, “from hell” tells me we are probably going to see that lead closet elbow with the right hand inlet from the tub get switched out. What do you think?
I was thinking the same thing , except I was waiting for him to sand the pipe in case there was some copper that became sharp like if a burr formed and mucked up the plumbing.
Yo, I get your point and yes why not but... I just re-did a toilet and what you see is really a wax ring. Even when you install a new one, it looks disgusting but really it is only aged wax.
You have to add shims under the bowl or this will leak in a year. And don't say it didn't need it..... you have to check....very rare do I set a toilet without shims....one of the most important steps in setting a toilet.
@@stevee7774 Pay attention? Shims have to slide in before you bolt it down Einstein...but hey...you go girl. Just watched part 2....lol...Wood for leveling? Wood? ...and in the front of the bowl? nothing to prop up the rear?....where the closet ring is??? Guaranteed to be a total mess in a couple years.....if you can't figure out why...don't be telling me to "pay atten." lol...
@@stevee7774 Hahahahah.....He tightens the closet bolts in part 1.....that's all I needed to see. 35 yrs in the Plumbers Union and 1,000's of brand new toilets (in brand new buildings) later I think I have a clue.... I plumbed complete custom houses by myself (from groundwork to finish) on the weekends before they stopped building houses in 08. Now I do a LOT of remodel. You sure get butt hurt easy for a lady. (end)
I'm born and raised in Queens NY (although i live in Minnesota now) and I can absolutely tell you Steve does NOT have a NY accent.. Not even close.. But I do love his steve'isms give it the ol' Gandhi... Mama.. Nexlevel nexlevel.. Next.. Level
Waiting for part 2. About 15 years ago changed the toilet at my grandma's house. The cast iron line was so rusted that the top ring broke when tightening up the bolt. Sealed it up best I could and to this day the toilet is held on by one bolt. Grandma left us 10 years ago and my cousin now owns the house.
I hate tank to bowl unions. one-piece toilets are cheap enough now even for a crappy rental unit. save yourself an extra step and possible leak point. A 20-minute install. easy
Holy geez that's an old place!! Plumbing was an afterthought!
That old plumbing was put in “when men were men and sheep got nervous” lol
I'm not a plumber, but I am an HVAC technician and I have found I get the most leverage by pushing rather than pulling. (just a little tech tip).
Thanks for the info, vids, and entertainment.
God bless bro.
I can watch this guy all the time. Very interesting!
When the words “from hell” are in the title, you know it’s going to be a good video.
All his video's are good.😢
The Oracle 313 oh god I just realized hell is a real place
And it's a two Pahtah...
When Steve says “ glad the shutoff valve worked” you only know what he means when an old valve fails on you. These older valve specially the ones that don’t get use often get build up and when you close them they fail . I had to change my heater recently and all the valves including the main shut off valve failed and what a mess.
Thanks once again for sharing your superior knowledge. I truly enjoy your videos.
so the walls won't get renewed? mold says hello...
great job, man. i appreciate your work.
A 🙃 lil' baby bottle of fantastic 409 can get da lil' bit of dat mold out🤔😎
That was 'ole crusty' toilet . Nice install, Steve
This guy's work is good and his accent is cool. Mobster plumber.
i finally got around to making my 5 gallon jug pan, and it went immediately under the rear axle of my truck so i could change the seal without decorating my driveway like i usually do. that was a great tech tip mama.
Can the flapper like thing and other innards be replaced on these old toilets?
"sometimes you gotta let the baby out with the bath water" wtf hahaha never in my life heard that one before
keep up the good work steven , love watching your working day here in the uk . love them basements .
Taj Mahal has some fancy linoleum!
I love how the intro was a Bacharach combustion analyzer, but steve uses testos ;) easy money!
I have never put pipe dope on my compression fittings and never had an issue, them again I clean the pipe with sand cloth before installing one so my ferrule doesn’t sit on any grooves
Thanks for posting Value Tester Link...
Will check it out, Thanks again..
Hey Stevie, where did you get that water siphon that you got the water out of that tank and bowl with? I think I can use one
If leak was on cistern why not change that or the flanges around the cistern
I absolutely love your videos I do this every day too so I can clearly know what you're talking about and share your pain good job
I notice in the US the trap connecting to soil stack always below toilet base in floor. Here in UK we usually connect stack directly to rear of porcelain.
“I just got to get a shingle for the front because she’s pulling a wheelie...”. Love to watch a journeyman work.
part 2? oh oh. pouring lead maybe? flange looked pretty good. floor wasnt rotted. i sure like those flange bolts. i never saw those before.
i dont care for the mansfield tank to bowl rubber coated bolts. They leak after a short time. i have changed a few to flat washers and bolts.
i sometimes will cram a little plumbers putty in the holes those old bowl to floor screws make just to keep the floor water tite.
nice video
I love these shows they are all in the New Bedford area .
Kudos to the flooring guy!!!😊
You are so correct on not trying to fix it. If shits been left that long it's so much easier to replace with a functional cheap toilet.
At 6:37, how many noticed the nut for the toilet seat bolt was upside down ,😀
So far, so good...LOL. nice work Steve!
Customer when she gets the bill: I don't like how this one flushes put the old one back.
Good work.. can't wait for part 2!
All I have to say is bless plumbers! As a carpenter I've done enough renos to know just how valuable it is having people that are willing to do this sort of stuff. My stomach isn't strong enough to do it myself unless it's my own toilet and pipes. Other people's funk is too much for me.
I could smell that where I'm at, and I'm in Oregon...
Dano C. I think that’s you buddy
Случайно наткнулся на ваши видео,теперь смотрю многие из них,сам работаю сантехником. Интересно знать,как там у вас работается))) Удачи вам в работе и побольше хороших заказов!
why don't you like using the wax rings with the horn/funnel? Just wandering. thanks ! great stuff!
It has something to do with water flush hitting the funnel and splashing back causing a potential leak over time... I think I saw him explain it a few years ago.
Just the sort of job you would want first thing in the morning!
One nasty looking setup!
I'm curious about final bill. I'm guessing about 350? I do the same jobs as you. I like your suction tube. Did you make that? I tip mine from side to side in a fire gallon bucket get almost all the water out , then I slide the old toilet out in new toilet box.
Not more? Toilet is $150 itself.
Nice job
Sometimes you just have to let the baby out with the bath water. 😂😂😂😂
Yeah, “from hell” tells me we are probably going to see that lead closet elbow with the right hand inlet from the tub get switched out. What do you think?
Jeremy deWolfe I was thinking the same thing. The lead joints probably leaking
Jeremy deWolfe 🍟🥩🍣🍣🥩🍤🌭🌭🍜🍝🍱🍣🍙🎂🍦🍰🍭🍿🍩🍪🌰🍯☕️🍵🥛🍕🌮🥪🍔🍔🥓🥓🍖🍖🍖🍖🍖🍖🍖🍟🍟🍟🍟
Thanks for the video steven!
Where'd you get the suction device used to pull water from tank & bowl?
amzn.to/38wRtwT
Jennifer Rae Fuchek I use a shop vac.
This guy sounds like frank rizzo "I'll rap ya fkin head in with a ratchet" lol
Hey what gps system do you use.?
Big ol FLIPPIN Tank!
For about 150.00 you can’t go wrong with a Mansfield.
nice job Steve, do you mark your parts up?
I was wondering...what the heck is he doing with those channel locks??? Is he trying to loosen the pipe?? Nope stripping the paint...LOL. Smart move!!
I was thinking the same thing , except I was waiting for him to sand the pipe in case there was some copper that became sharp like if a burr formed and mucked up the plumbing.
Steve What higher end toilet do you like to install? Do you prefer the ole gravity flush or the newer power flush toilets?? As always,, good gob!
I
usually shower to
Did it smell when you had the toilet off?
I thought you didn't like the 1/4 turn ball shutoff valve. Any particular reason why you decided to use one on this job?
i needed a compression shutoff ,for this job thats all they had at the supply house i went to so i had no choice but to use a 1/4 turn style
14:05 AWSOME copper pipe cutter who makes it?
All hell is about to break loose.......and I think it involves that lead bend!
I always put a little bit of silicone on the tank to bowl gasket
Plumbers silicone not caulking. The silicone ensures a good seal when joining the tank to the bowl.
It’s not the Taj Mahal, Mama! Gave her the Gundy, Mama.
8:20 I expected to hear “I can’t for the life of me understand why you would wear gloves”.
Yo, I get your point and yes why not but... I just re-did a toilet and what you see is really a wax ring. Even when you install a new one, it looks disgusting but really it is only aged wax.
9:30
Good grief mama, that ain't no taj mahal!
The Old Rope and Lead Seal 😬
What kind of light blue pipe dope is that ?
JonesHvac megaloc. It’s good stuff.
It’s called tru-blu. It’s the best pipe dope you can buy imo
Why do you wear gloves. Never gets old.
You have to add shims under the bowl or this will leak in a year. And don't say it didn't need it..... you have to check....very rare do I set a toilet without shims....one of the most important steps in setting a toilet.
@@stevee7774 Pay attention? Shims have to slide in before you bolt it down Einstein...but hey...you go girl.
Just watched part 2....lol...Wood for leveling? Wood? ...and in the front of the bowl? nothing to prop up the rear?....where the closet ring is??? Guaranteed to be a total mess in a couple years.....if you can't figure out why...don't be telling me to "pay atten." lol...
@@stevee7774 Hahahahah.....He tightens the closet bolts in part 1.....that's all I needed to see. 35 yrs in the Plumbers Union and 1,000's of brand new toilets (in brand new buildings) later I think I have a clue.... I plumbed complete custom houses by myself (from groundwork to finish) on the weekends before they stopped building houses in 08. Now I do a LOT of remodel.
You sure get butt hurt easy for a lady.
(end)
I swear, every episode, dude is telling the client to replace. Toilets are easily rebuilt from the inside.
It’s all about time and money. I’ve tried to screw with old gaskets and parts and it makes sense sometimes to just go new.
Fun times. Been there done that, it’s even worse when guys can’t pee straight and don’t know how to clean a toilet.
Toilet looks as old as the bathroom. What came first the toilet or the bathroom.
No sheet-metal work steve are going to see your work is nice it's very complete and looks good not slam Bam thank you ma'am
When are u gonna update the sponsor in the intro?
3:27 evidence old lady was doing upper deckers in that toilet
Tommy Maloney what is an upper decker 😂
@@austinvenable7350 when grammy takes the lid off the back of the toilet,climbs up and drops some heat into the water tank.
What's that hand pump Steve is using? Did he make that or buy it?
amzn.to/2jwEGCz
Thanks! Next level for sure :)
Steve what part of NY are you from?
I'm born and raised in Queens NY (although i live in Minnesota now) and I can absolutely tell you Steve does NOT have a NY accent.. Not even close.. But I do love his steve'isms give it the ol' Gandhi... Mama.. Nexlevel nexlevel.. Next.. Level
wtf you talking about?
Like your new intro
Why on EARTH would you ever wear gloves... XD
Watch as I fumble my wrenches backwards. That's how you do it.
I hope you had good ventilation in there.
"Why do you wear gloves?" When you touch the nastiness with your glove, put it back onto your tools and never sanitize the tools after use.
You need to re think your observation.
5:35 - 3 valves are seen in one shot... HL3 confirmed 😜
Exposed plumbing don't see that to much these says
I never saw a toilet with four bolts
I guess all rivers in India are hell to you lol
Awesome video ... thankfully they don't make em like that anymore ...
so far so good...wonder what awaits us in part 2?
What do you mean why does he where gloves it is obveious that toilet is nasty
Why not put the tank on before you set it ?
If you do that, then it adds so much weight, when you go to lift it over the closet bolts, it’s a real bitch to line up the holes.
I want to start using those closet bolts. They look like they’re the shit!
If it's a leaded closet..and the call is for a leak..call your other appointments for the day and push them off.
wxfield you're right it will be a long day on that one
Been there! Lol
why does he wear gloves?
Is that a deviated septum ?
Is that another outlet inside the toilet drain from somewhere else,sink,shower!?
Probably the shower, looks to be a closet bend with a side outlet for the shower.
Edit: Just watched part two and he says it's a vent line
that was a good idea to install a new shut off
i’m going to start pipe doping my fittings sometimes those fuckers are hard to get on
4 bolts.. they should call those heavy duty toilets
What is a "Johnny Ring"?
The old question comes to mind why do you use gloves😊😰😣😷
that cap on the side of the valve is to drain when water shut off
Waiting for part 2. About 15 years ago changed the toilet at my grandma's house. The cast iron line was so rusted that the top ring broke when tightening up the bolt. Sealed it up best I could and to this day the toilet is held on by one bolt. Grandma left us 10 years ago and my cousin now owns the house.
Show us your syphon as that is cool.
No Taj Mahal for sure!
I hate tank to bowl unions. one-piece toilets are cheap enough now even for a crappy rental unit. save yourself an extra step and possible leak point. A 20-minute install. easy
No compression of the wax seal. It might leak but I don't care.
Was thinking the same thing and i too don't care 😎 lol
That didn't seem too bad. I've had a heck of a lot worse.