Avoid These 7 Common Toilet Buying Mistakes!
Вставка
- Опубліковано 10 чер 2024
- Are you trying to find the best toilet for your home? Shopping for a toilet is complicated! Avoid these 9 mistakes when you're shopping for a new toilet!
DISCLOSURE: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission.
DISCLAIMER:
The information and opinions within this content are for information purposes only. Guidance is based on personal interpretations and in no way, represents legal or financial advice.
0:00 Intro
0:07 Rough-In Size
0:17 Toilet Coatings
0:31 Round vs Elongated Toilet
1:03 Standard vs Chair Height Toilet
1:51 Single vs Dual Flush Toilet
2:12 Name Brand vs Off-Brand Toilet
2:33 One-Piece vs Two-Piece Toilet
2:58 Standard vs Skirted Toilets
3:25 Toilet Seats
Note: As an Amazon Associate and LTK, I earn from qualifying purchases.
My current favorite toilet: bit.ly/3n9B35i
My current favorite toilet: bit.ly/3n9B35i
OK my floor is roughed in at 14 inches and the toilet that I have is designed to be roughed in at 12 inches. Which means there are is 2 inches of empty space between tank and wall but if you bought a 12 inch Rough in toilet and your home was roughed in at 10 inches then you would have a bit of a problem!
@@Hezelcarl1 that's true! It's not the end of the world to have too much space but not enough space is not gonna work. :)
Hey, great buyer's guide; thanks! We are in the market for a new toilet for our main floor and (I lie to you not) we were just at Home Depot last night looking at the American Standard VorMax. Can you tell me; does it have a foam (or other) liner on the tank interior so it doesn't sweat? That is the only feature we found as a standout on the Titan model at Menards but VorMax's box doesn't state anything about that. - Jeffrey
@@jeffreykostecki2659 it does not have a foam insert - I think that's a pretty rare feature to find.
What about the KOHLER MEMOIRS WHITE Elongated chair height 2 PIECE WATER SENCE TOILET?
I LOVE A UA-camR WHO GETS RIGHT INTO THE TOPIC!!! It's much appreciated as opposed to the many YT creators that insist on superfluous commentary for the first minute or so of the video
Glad I could help!
Clear, concise, and no rambling stories about irrelevant, off-topic things. Nice
I don’t know what I searched/looked at to get this in my recommendations, but it made me curious, so now I’m watching a toilet buying guide even though I don’t need a toilet.
I recommend you check inside the tank for a large flapper on the flush valve. Be sure the store stocks repair parts, not “parts are free just call the number inside the tank” unless you want to be without a working toilet until the part arrives. Also look in the bowl for the small hole at the bottom, the larger the hole the better flush.
You are SO right. I’m elderly and disabled and I bought the wrong toilet and now I have to get a new toilet and seat. The toilet I have now is elongated but has a cheap thin plastic seat that sticks to my skin every time I stand up. The bowl is not big enough so it doesn’t put enough water in to cover the poo. Not enough water means the poo won’t flush down properly and with some of the poo in the air and not in the water it smells. I don’t have antimicrobial either so after a few days there is an awful blackish mold type ring in the bowl.
Excellent video with very accurate information. The only thing to add is that the slick finishes on the high-end toilets, although great in keeping it clean and flushing better, are quite fragile compared to regular porcelain and no hard brushes or harsh chemicals (absolutely no bleach) should be used on them, especially inside the bowl. Use a sponge and dish detergent to clean the toilet with those special slick surfaces.
Best on the market is American standard champion 4 I’m a master plumb! This thing will flush a meatloaf! Comes with everything in the box for installation ❤
Flush a meatloaf! lmao!! Is that in the pan or outside the pan?
We installed two of these a few months ago at the recommendation of a friend she said they flush anything.
We love them. They would flush a meatloaf! lol
List price $1,048 sale in price $680! No thanks. I'll just eat the meatloaf and flush it in smaller portions.
Meatloaf 😂 hell NAW 👋🏾
Don't let this guy lie to you. American standard 4 is the biggest piece of crap there is. It clogs ALL the time and is in unplungable. Stay away if your smart, don't fall for the hipe like I did
This was awesome! We had to buy a toilet quickly, and your advice was incredibly helpful!! Thanks so much I look forward to more videos from you
Glad I could help!
Thanks for the link and saving me from having to put any thought into my toilet purchase! It's going to be great! :)
Hope you enjoy it! 😀
Thank you for this awesome video. Exactly what I was looking for! Well done 🎉
Glad it was helpful!
This was very helpful! Thank you
Great information, thank you. I'm getting to Kohler chair-height toilets this week and I was contemplating getting the dual flush but I got the information I need now. 👍🏿
Glad it was helpful! Good luck with your project!
Nice presentation style. Thank you!
Informative, fast paced information delivery. 👍
Thanks! I'm trying to get better at making videos useful and as fast as possible!
I am totally surprised that this video answers EVERY question I had about getting a replacement toilet. Thanks for an informative video.
Glad it was helpful!
Short video and straight to the point. Thanks
What's funny is getting used to your slow-close seat and then "BAM" when you're at someone's house.
Great video. I've spent a few days researching and reviewing toilets, and you touched on all of the things that I found were important. I didn't know Toto was a top brand. Thanks.
I'm glad you liked the video!
Awesome and very informative video. Good job. I have one question though: When you did the rough in measurement don't you supposed to measure from the wall to the middle mounting screw on the toilet? You measured the bottom wall molding and not starting at the back of the wall. Did I miss something or am I right?
Yes, you should go to the wall but measuring to the molding will get you close enough because it's going to be either 10" or 12". You are correct though!
I just went through this. Measuring including the baseboard measured 10 3/4” and measuring from the wall and being a couple inches above the bolt because where you had to put the measuring tape against the wall, it shows 11 1/4”. Knowing nothing about plumbing, would I consider that a 10” or 12” rough in?
Thanks for sharing this.
Great video. I was about to buy a dual flush, and a plumber warned me that they can be really hard to fix, so scratched that.
I'm glad the video helped!
Plus the buttons are on top of the tank where we usually keep a box of tissues.
Also how do u clean it? It's just gross!
The other issue I recently discovered about a one piece toilet is the curved transition between the seat and tank. The Toto bidet does not fit well because of the rounded space…
And she overlooks the most important point.... size of the toilet trap. efficent flushers have a 3" trap instead of 2" -2.5". Get a Titian By American Standard. The anti-microbial coating seams to only last a few months. Tall toilets might be easier to get up from, but the lower you are the better boast you'll have getting your business done. Finally don't skimp on good thick toilet bolts in brass. A broken toilet bolt can lead to undetected leaks and expensive subfloor rotting. From a remodeler of 26 years experience
@malcolmthompson9848 undetected toilet leak rotted my subfloor and messed up the ceiling below. Smh😢.
With my problem knees, it's a bit painful for me to sit down on, then get up off of a low-height toilet. Comfort height is so much better for my knees. So I guess it's a trade-off. Besides, prune juice is a very good "business" inducer if my "movement" needs a push.
Great info. Thanks
As a plumber, I agree stick with namebrand parts of easier to find, and I dislike installing skirted toilet
We've had two Gerber toilets for over ten years and they have been excellent, very efficient and dependable.
Thanks. Very helpful.
You're welcome!
Superb overview. Thank you.
Glad it was helpful!
I made sure I measured and got the right size for the two toilets we just replaced. They are elongated and ADA-complient because we knew, now that we're getting older, it would be easier to get on and off. The Toto Drake is what we got after a ton of research and it ticks all your boxes, including the slow close seat. These Totos we now have are amazing. Zero regrets.
Thank you for the well informed, common sense video 👍🏻
Great video. It's also worth mentioning that one piece toilets are usually more compact and stand out from the wall less.
Got an American Standard that checked all these boxes, plus with two flappers that cleared up the regular slow draining we used to fight with, and a and a bowl swirl port.
Best toilet out there.
Super conseils. Merci
The champion is the champion! I bought a heated toilet seat on eBay several years ago and it's still working. Just warm enough to avoid that shock factor of an ice cold seat in the winter.
I’ve done it myself but last time hired a plumber, he recommended Toto which I never thought of, he was right, it is great. It uses very little water but flushes extremely well.
I just bought a toilet based on your advice, thanks!!
Glad could help!
When I reno’d my bathrm my plumber suggested a “comfort height”. Bought it, HATED it. I’m 5’4” and the extra height was very uncomfortable. I ended up giving it away and went back to regular height. If you’re short (5’4” and under) stick with regular height.
Good tip! I'm pretty tall so I didn't think to say that.
I did the same thing, Lenore. After having to squat to, "take care of business" during work hours I realized what a comfortable position that was. Cut to redoing the bathroom and I purchased a toilet that was too tall even when I'm 5'9". I'll be returning to a shorter unit directly.
I just looked at those ❤Thanks
Taller toilets put our anatomy in a less efficient and less healthy position. This results in increased straining. Technically, we're built to poop squatting. So it's not smart to install higher toilets. The lower choice is better for your body. Also, the lower potty keeps your sit muscles in good shape. The tall version may be more "comfort" but that's a false economy. The older u are the more important it is to keep your thigh muscles optimal. Ask any gastroenterologist.
Terrific video and great presentation!
Glad you liked it!
Thank you. I took all the relevant notes. I appreciate this, I was thinking all toilets are pretty much the same.
Glad it was helpful!
You nailed it, I made a few of those mistakes after buying a Glacier Bay 1-piece, double-flush toilet. After experiencing clogging issues on a daily basis, I replaced it with an American Standard Champion toilet and couldn't be happier. I wish I watched this video 6 months ago :)
Aw well, I'm glad you're happy with your new toilet! Who knew it could be such a tough choice!!
I did the same, never will be cheap GB toilets again, terrible
Glacier Bay is made by Kohler. There are only 3 makers of toilets today. American Standard (used to be the best but has slipped to third imo), Kohler (middle of the pack) and Toto. Toto makes the best by far and is the usual pick by professional plumbers for their own home. Everyone has an opinion and this is mine.
Yes, she really did! My new-to-me house has AS Champion toilets as well and they are the best toilets I've ever owned! The master bath is a tall "chair height" and I do prefer that height as well. I also replaced all of the seats/lids with wood soft-close ones. Basically, I came to all of the same conclusions as she did (except for the one about the coatings, I don't know if my toilets have such a coating.)
@@cgirl111 I'm not saying you're off point, but just want to add that many items or especially food products, are produced by major manufacturers but are usually scaled down. The scaling down can be made by either the brand name manufacturer or the distributor. Either to be a cheaper & more profitable for them or by the manufacturer to save their own product line sales. Either way, it's the trade off the buyer has to decide on.
Great points! I've had a short, round toilet for the past 17 years and it's got to go. Mainly because it doesn't flush all that well anymore, but that shape and size has always annoyed me, too.
Best video on toilets on UA-cam other people trying sell you a brand very informative. Remodeling a bathroom in my home
Wow that's quite a compliment, thanks! Best of luck with your remodel!
I just ordered a Toto washlet - so excited. I never thought I'd be able to afford a Toto, but yep they have a few models that are considered "entry level" washlet (bidet). They still cost a lot, but not thousands of dollars. The only downside it will take 4-6 weeks for it to get to the good old USA.
We were fortunate enough to get a Toto add-on seat bidet, also called a Washlet. It’s great! Especially in cold weather, when we don’t keep the bathroom particularly warm, the seat is heated, and so welcome! What a great invention!
On the other side of the coin, our home center replacement toilet has poor (or no) glazing under the waterline! Trying to keep it clean is a nightmare! Next time I buy a toilet, I’ll open the box and examine the bottom of the bowl for a good, shiny, washable glaze!
Brilliant video. I think you just saved me from buying a skirted toilet. I'm function-over-form and being able to easily change the seat is a feature worth having.
Glad I could help!
I do hate cleaning all the curves and corners on the sides of a toilet though. And around the flange bolts. The floor always has hair which is magically attracted to the toilet as soon as a rag comes near.
So maybe not so bad?
Skirted toilets are easier to install, at least the Koehler ones are. They have a ReadyLock system where the wax ring goes and it means you can more easily align the toilet with the pipe. The assembly is quick and easy.
I think I love you, talking about toilets like that!
Haha, uhm, thanks. 😂
quick and concise video
Thanx for the tips
You're welcome!
Thanks for valuable video
You're welcome!
Thanks this was helpful
Glad to hear!
great job, learn a lot
Glad to hear that!
You missed the biggest mistake which is not getting a bidet
Why?
@@gtt85 they’re amazing, especially the ones that have a seat warmer. Keeps your butt waaay cleaner than toilet paper alone.
@@AryaStarkyread your comment wrong. Thought you said the mistake was getting a bidet. I love mine.
Was thinking doing my toilet next month, slowly replcing few things in bathroom before major construction and hire someone. save this for later, thanks!
Best of luck on the renovations!
When we did over our washroom, I researched toilets for two weeks. Finally bought an American Standard Optum Vormax, look up some videos, you will see why.
Did you look at the Toto Drake? That's what I'm thinking about getting. Do you think the Optum Vormax is better? I watched a plumber and he was saying AS is the "lowest" of the three (Toto, Kohler, AS). Let me know your .02. Thanks.
what was the price ?
@@terryvlunsford1610 $280.00 +tax (Canadian)
Standard Height and round bowl for me. I'm not tall so this works well for me. I have a KOHLER Wellworth toilet bought in 2015 and has been flawless.
Did a mini bathroom makeover in my condo last month including new vanity, medicine cabinet, lighting/ fan and flooring. I decided to keep the same toilet. Bought on sale at the time for $128 then take 10% off for the military discount.
This model has been made since the 60's.
Awesome! Glad you found a good one!
THANKYOU for all that information.
Just installed the VorMax Esteem, love it.
Awesome!
Great video. I just purchased 3 chair height, elongated American standard toilets yesterday without knowing American standard was a top 3. My feelings have elevated after watching this.
Awesome! Best of luck with the install.
Hi how are they working
Threes are working just fine.... easy install, no issues.
@@BCO216 ok thanks
Rhonda, you're so welcome. I hope I was able to help.
The worst thing is trying to do a BM while almost sitting in a chair posture! it makes it much more difficult and one of the reasons other countries elsewhere use a squat toilet, squatting is THE natural position to do this NOT sitting upright! The squatting position or bent over at least is the one that helps the process a LOT.
It can be hard to get out of a low seating, so may need to have a grab handle on the wall. Or one can have a higher toilet and foot stool to raise the legs. The choice is then which accessory one prefers, foot stool or grab handle.
“Squats potty”
Sorry, “Squatty potty” with chair height is the way to go!
All I see here is someone who needs to eat more fiber. It shouldn't be so challenging to accomplish...
This has been proven to be true. The bowel gets better evacuation in squatted position. However, if the lower position is physically difficult to achieve, as mentioned in comments, a small platform or railing may help.
Thank you 👍.
You are welcome!
I agree with you that one-piece toilets are heavier, but you will never have a leaking joint between the tank and the bowl, it will save you a lot of trouble in the future or the expense of a plumber. I agree with you that skirted toilet are more difficult to install, should leave to a pro. I saw the tricks the pro used when he installed mine, so maybe I could do it in the future. Check special promotions; I bought mine at Home Depot installation included!
I just found your channel. Awesome!!
Welcome!
25 year plumber here - all your points are spot on! Especially regarding the elongated bowl for the men. Any man using an elongated bowl will agree!
Thanks!
I installed a Mansfield flush assembly and it allows you to control the flush. Push the handle down for 1 or 2 seconds and then up for liquid waste or leave it down for solid waste.
Hi from Southern California. I replaced both my toilets in 2016 with dual flush and am perfectly happy. American Standard. In 2022 I discovered some water on the floor in the downstairs bathroom and fou d that the tank had a hairline crack.
I was out of warranty but my plumber suggested I call American Standard to explain and ask them "just to verify the correct replacement tank model". They sent me an entire new toilet, free of charge. So, very pleased.
Oh wow that's great service!
Yes! Yes! Yes! Customer Service is a HUGE selling point when it comes to making [any] purchase! Stuff happens and things break down. Most people just want to know there will be someone from the company there to help if that should happen to them.
Our plumber (35 years experience) has been with us for the last 8 years so we trust him. He told my husband and I he'd gladly put in any toilet we choose, (and he would!) but recommends American Standard. He was up-front to us about the fact that, yes, they are easy to install but more than that, parts are readily available if need be. (Only having one bathroom in our home, that's important!) So we were trying to choose from the A.S. product line...
But for every positive comment we read about - well, ANY given brand of toilet - there's literally ALWAYS a negative one. We subscribe to Consumer Reports and we STILL didn't know which way to go. (lol!)
But your statement about customer service is a GREAT reminder that a product is only as good as the company that stands behind what they manufacture. Thank you for that!
So the search for a new toilet continues, but I'm thinking we will keep American Standard at the top of the list.
Thanks for the video. In 2024 if you were to buy net toilet, which one would you pick?
Another tip, you want to spend a bit more on the new toilets with a tornado type flush if you can (kohler revolution 360, american standard vormax or toto tornado) because they tend to not leave spots in the bowl and they also tend to be more powerful
If you buy a skirted toilet be sure to check your supply line location. Must be 4-5 inches to the right side because skirted toilets fit right up against the wall so no room for the supply line behind the toilet.
Yes! Excellent point! We had one bathroom that would not fit a skirted because of the supply line location.
Depends on the manufacturer of the skirted toilet. American Standard skirted toilets allow the shut-off valve to be located behind the toilet and out of site, but the supply line should exit the wall or the floor 2-1/4" from the drain center.
Who knew there was so much to know before buying a toilet. Good video.
Glad I could help!
Just watched.....You are 110% correct....Great video
My favorite toilet is the Mansfield Summit. They are manufactured in Perrysville, Ohio & offer a strong, vigorous effective flush. Mansfield has been around since 1929, & I love the quality of their fixtures. The Summit is available in round & elongated and is available at Lowes along with 3 other Models from Mansfield that are made in the U.S.A. I had to go with the round version because it is the only size that will fit in my bathroom. There is a video of it on my channel. I totally agree with you about avoiding one-piece & off-brand toilets.
Thanks for the tip!
This sounds strangely like a commercial. The plumbing supply house I work for stopped carrying Mansfield.
Elongated toilets are indeed the best and Toto is our brand of choice. That said, we do have a skirted one piece toilet (actually 3) and wouldn’t trade them for anything. We just moved homes and I tore out the brand new toilets and bought Toto’s to replace them. I’m 73 and did the job by myself - no difficulty at all!
What a great video 😮!!!
In doing some research on the Optum Vormax, I read that it has a problem with the flappers not sealing correctly so the water keeps running. Have you heard this? I loved your video!
Our first Vormax actually had that issue (it was the very first generation of them) and we were able to get a replacement flapper from American Standard that fixed it. We've bought 2 more since then and had zero issues.
I’m a plumber and I approve of everything you mentioned. Especially about dual flush and sticking to quality manufacturers.
Skirted toilets suck and you will pay a premium to have one installed.
I am amazed how old-fashioned the American toilets look, including the one recommended in the link. In Germany, we mostly use wall mounted toilets with concealed in-wall tanks. This has been the predominant toilet for the past 30+ years. Very easy to clean and fairly easy to maintain, if using a good name brand.
I've seen those and I don't think you can even buy them here (at least they're not readily available). They definitely look easier to clean!
But what if one of the valves goes out of tune? How do you access inside the tank if needed?
Thanks!
You're welcome! And thanks for the gift!
Hmmmm....biggest mistake for me was buying the more common floor-outlet toilet, when in fact I needed a rear-outlet toilet. Should be noted that if you live in a high-rise building, there's a good chance you will need a rear-outlet model. This was a specification I never knew anything about, but is the most important because if the sewage drainage is in the wall rather than the floor, you won't be able to install a floor-outlet model at all, never mind fret about how comfortable it is.
Excellent Job❤❤❤❤❤
Thank you! 😊
I honestly still prefer vintage toilets, but if you want to find a new toilet that's good, a Toto Drake, a Gerber Viper, or a Kohler Class 5 or Class 6 are ideal choices.
I personally don't recommend Glacier Bay, American Standard, or even Delta.
Than the 1 pc? My mum bought 2 pc i wonder if that is a good thing
Toto Drake II is the best.
I prefer vintage plumbing also.
Kohler makes a compact elongated toilet that fits in the same space as a round front toilet. And, it is a good toilet! Shorter toilets are better physiologically and should be the go-to unless you are dealing with older people who may have trouble getting on and off of a shorter toilet.
My husband and I are both much taller than average. We would never settle for a regular height toilet in our home.
@@jesseostone386 Yes, the comfort height makes it a lot easier to get on and off of, but @JesseO Stone is has a valid point, our bodies were designed to be in a squatting position when having a bowel movement. Higher toilets can lead to other physiological problems, such as contributing to constipation and failing to have a full evacuation.
FOr seats, I say go for the ones that have the cams that hold it onto the mounting bolts. With a twist of each, the entire seat comes off so easily to take it over to the tub to give it a full cleaning, in all nooks of the hinges as well.
???????
Can you provide a link to one, or a picture of what you’re talking about?
Mansfield makes very good toilets too. I have the Summit model and love it, good strong flush with 3 inch flapper - most others are just 2 inch so not as strong on the flushing. And mine has a light flush, about 1.18 gal, and the full flush 1.6 gal. Even the light flush works great!
Nice! Thanks for the recommendation.
Great advice. I’m not a plumber--just an “older person with bad knees”, and also recommend spending the extra $50-$100 for the ADA (17-inch height) commode. We’re all gonna be “old” sometime (if we’re lucky).
Good job lady. No wasted time getting to the point like so many other 'blabber' mouths who seem to get off hearing themselves talk as though they're being amusing. Last, your points made are sound advice. I look forward to your other tutorials, even if I don't 'think' I have a need for them.
Thanks. I took heed to everything you said.
Glad it helped!
thanks for this info - I am just upgrading my toilet and have thought I wanted a higher height and potentially something that uses less water.
Glad it was helpful!
I've issued this at Ace Hardware where the Men's had a round Mansfield Alto and an elongated Crane Galaxy Elite.
Great video. I have a family member who broke a hip and hopefully soon will be able to go back to a regular bathroom. But I wanted to get her a new toilet. So looking at Lowes and Home Depot all I see are what are called ADA compliant toilets where the height to the RIM is 16.5 inches. Is this high enough? How high to the rim would be considered like CHAIR height or the right height for her?
Chair height, "right height", and ADA compliant height all mean the same thing. If she needs it to be higher, there are medical devices that can help - there are seats that sit on top and raise the height a lot more for people with disabilities. I helped someone after a hip surgery and that's what we used. Best of luck with the recovery!
I kept my old 15 inches height toilet but bought an 4 inches Toilevator to raise it to 19 inches! It is just the perfect height for me. And it looks good.
My house has a 1957 standard toilet. It works really well and is easy to rebuild with replacement parts from any hardware store. I was considering replacing it with a 1.6 gpf, but may keep it based on posted comments about low volume toilets.
I think you might be surprised how great some of the modern toilets are! And with a toilet that old, you're using a TON of water. You might notice a change in your water bill with a new one (unless you're on well water).
Your 1957 toilet uses 5 gallons every time you flush it! Please do your part to care about our natural resources.
@@travelguy1564 I live in a city that is on a river. No shortage of water. We worry about flooding. Also, I pay for every gallon I use.
My outlook as a plumber is that you can save water in other ways but when it comes to a toilet you want as much water as you can get to help it flush all that stuff out. Especially in older houses with cast iron pipes where the inside pipe wall is rough and cruddy over the years. Paper doesn’t want to flush out as well so the more water the better. Don’t want the water to outrun the paper
I hope you didn't change your toilet. Don't listen to the people who say that you are wasting water. The same people need to flush twice or thrice resulting to "wastage" anyway.
What are your thoughts on wall mounted toilets? I’m thinking of getting one because it will be easier to clean for me. Are there any you recommend in particular? Thanks 😊
They have to be tightened periodically.
I Only buy Elongated Standard Toilets. Toto Drake is my go to!
We’ve always had round seats mostly due to space but I get what you are saying lol.
We purchased a Duravit elongated and I HATE it (I bought online) due to the seat. I am not a waif at 130 lbs 5’5” but i seem to “sink” into the toilet due to lack of side support (same width as my rounded one) and my feet tip toe on the floor as a result. Same height as our other toilet with a rounded seat which does not bother me. My legs fall asleep and that’s bad for your back.
Also let’s not forget the intricacies on the underside of the Duravit toilet seat - what on earth were they thinking with the grooves????? The seat is so hard to clean!
It’s a skirted toilet which I love but they went the other direction with the seat. The underside of the seat also stains and I’m a clean freak. It turns to yellowed old plastic (mine is installed 2019) like a kids toy that got water damage and it drives me mad that it looks dirty. I clean my toilets daily!!
We have a holding tank, and I have to disagree about the dual flushing system.
Great video!
well said you hit all the major points
Thanks!
Most toilets are pretty good, but one brand I would absolutely not recommend is glacier bay. Their toilets have horrible bowl rinse and tiny trapway, which means they’re easy to block up. They’re also very prone to breaking due to being made of poor quality porcelain.
Wow, and that was my second choice
I have had good luck with glacier bay except that they are extremely fragile and require extra care when handling them. For the price they are okay as long as you know to be very careful when handling or installing them.
@@terryvlunsford1610 there's 2-3 models that are ok, but most of them are awful.
DISAGREE!
The coating on the American Standard lasted a few years, now it won't flush clean anymore with a brushing.
Thank you so much, you really helped me.
Glad I could help!
I have a Kohler lower toilet and like it because things just come out better in the end. And a 1.3 gal flush over a 1.6 is every fifth flush being free.
You are spot on at 1000 yards, Sister girl!
I think I heard somewhere that off-brand toilets are still made by the big 3. Not sure if that changes the hard-to-find-parts thing or not, but I know for some large appliances like dishwashers where the same kind of thing applies, the parts they use are from the original maker (like I think Whirpool makes Maytag as well, so the parts are all under the Whirpool name) but I could be 100% wrong.
That would make sense!
Kyle, there’s a difference between products by by the big OEM and their sub brands. Sears appliances are made by big companies, but to Sears specs and that means to the dictated price. So a cheap Sears washer can be made by Samsung but is still a lesser washer than an expensive Samsung. Whirlpool owns Maytag, and they share technology, but are made to reflect their specific markets. It’s like Volkswagen owning Audi, but a VW is not an Audi, and VW also owns Lamborghini, but a Lambo isn’t VW or Audi. Back to toilets. It’s unlikely Kohler AS Toto make other brands but Kohler does make an entry line for Home Depot at a cheaper price not available elsewhere. You see that with windows too, like an Anderson entry price window at HD. But the manufacturers will instill it’s a cheaper product at a lower price, and not their more expensive, branded products being sold at a discount.
Mom ,
We have the round type in the bathroom, and we cannot change it to the elongated type.
What do you advise?