Looking for some inspiration on a dirtbike flat bed trailer I’m building. Those lights look pretty slick. Do you happen to have a link for name of the lights? Thanks -Derek
thanks J JO! I agree totally.... Ive done enough projects fast... only ending up needing to revisit them later for repairs that now I try and make sure its done right the first time :) Joe
Great Job!! Somehow you are doing this not only for your family, but also encouraging everyone who have a DIY project to make it become real. Thanks a lot for your sharing!
Hi,you have to be the neatest cleanest tradesman I think I have seen.looking at your work and looking inside your shed is amazing.Keep up the good work and I look forward to watching your future projects. Cheers, Kevin.
haha thanks Kevin... but that is a compliment that I certainly don't deserve.. you should see the table that i've been keeping all the tools on near the trailer..... its a mess...lol
Thanks for letting me see what you were doing for sealing and trimming the side-to-side and roof-to-side joints. That part has always troubled me as I see it as one of the most difficult and necessary jobs. If you don't get it right, water will find a way in to stain the ceiling and walls , as well as start rot on all the framework and cabinetry.looks like another great video of a great project. Thanks again Joe and I'll be watching for that next rainwater harvesting video.
The slope on the bottom in the back is one of the best features of the trailer. I had a single axle camper that would drag the back with just the slightest dip in a driveway or crossing over a road that was slightly higher. I noticed other people with similar campers actually put a wheel on the bottom of the back bumper to counter this issue.
the camper is coming along great!!! your killing it!!! just put my door on yesterday. what a sense of accomplishment a door makes. decided to go a different route on mine. 2x4 construction, completely rounded ends, 18 feet long. i have a feeling it will be my permanent home. major decision, it'll be my last build. i'm young, sort of, retired, and i have let my life pass me by. i want to see what i missed along the way. except for my welders and plasma cutter, i think my tools are going up for sale. after this one, i really dont want to build anything else. no fun building alone. when i get done, i'll link a video, i want your opinion. cant do a full video like you did, wicked southern accent that would be full of quite colorful language... again, your doing an awesome job.
Mark Cobb thanks mark! Yep the door adds quite a bit! Sound like a cool project...and don’t worry about it colorful language...can’t say I haven’t let a few choice words go during this build 😉😂👍
i had some video going but the camera met an unfortunate accident, followed by several of those choice words. i could have done a what not to do ##*$#^ video. sad thing is, i have a single axle out there and enough steel to build another trailer base. thinking about building a small version of the big camper. since the big camper is shaped like a pill, i may paint them blue and call it the viagara racing team. you will see me going down the interstate with 80 elderly couples following. are you planning to have a shower attached somewhere? and are you going to designate a spot for a port a potty? they are life changing necessities and some campgrounds are restrictive on self contained campers. the port a potty can be set on rollers and hid under a cabinet. cassette style, from 60 to 150. insta heat showers around 140. winter camping has been tough with an outside shower and a major decision in the new build for me.
Fellow Arizonian here, great work! Your videos are structured well, easy to watch, and that trailer is going to be far better than anything you can buy off a lot.
It seems you have forgotten your wiring for a lighted license plate bracket. In the wheel wells, (from inside), I'd spray everything with rubberized undercoating. 2 layers everywhere along the edges. It makes for a great seam sealer and kills any issues with condensation on the inside of the steel fender.
I actually have a tail light that has a license plate light.. that will either go on the bumper (deciding still if I will make one) or the low side. It's powered by the running/tail wire. No specific wire for just a license plate light. I do like the idea of the rubber undercoating spray though.. thanks Steve! :)
I saw another video where the trailer was about the same size as yours. They installed a tiny bathroom in the corner like caddy-corner with an accordion style door. He hung the shower head right over the toilet so that you just have to stand next to the toilet or sit on top of the toilet lid to shower then stand up to clean and rinse your bum lastly. The water drains out through the drain in the floor. Then, a tiny sink next to the toilet just big enough to wash your hands and brush your teeth. A cover over the toilet paper roll that you can pull down to keep it dry while you shower. He also left the top open just below the ceiling for light to penetrate. I hope this gives you some ideas. Although small, it gives you what you need. Great videos, all of them. Teaches me a lot. Thanks for sharing.
thanks Tory! the bathroom and shower will be the last things to go in as I'm not totally sure how to set it up... but it will be pretty basic... no black tank, just a cassette toilet for emegencies...haha... I prefer the great outdoors for me, so its mostly for my daughter... and wife at night if its raining :)
Yo Joe, your travel trailer is lookin incredible buddy!!! 👍👍. You could always put your logo on the side of the trailer. Just a thought.. You ARE a one man construction crew my friend! You're doing a fantastic job. ☆Jay 😀👍👍
Hey Jay! Thanks buddy!! I'm currently trying to decide whether I'll have it on the side or back... or both. I don't want to over do it but I think it would look cool! Just need to find the right logo outfit that can make one that is really UV resistant. From my research most all the decal places 'say' their decals are UV resistant but when I see them on vehicles, some look great and some look sun burnt... defintiely dont want the logo getting all faded or burnt after a year in our weather...lol
Silver Grizzly homesteadonomics well another tidbit for those nomading or just cargo safety, put something on them. People don't trust nondescript vehicles and they garner much curiosity. I personally wonder what's going on and make a point of watching and avoiding any vehicle I can be snatched into. It doesn't matter what it says, people just register some association and feel less threatened resulting in loss of interest. You could write "Grandma eats butt" and they'll assume it's a bakery delivery van or something akin..😏 It's our messed up society but IMPORTANT for many reasons.. God bless
Joe< excellent work! by far the most boss DIY Camper trailer I've seen so far and Ive been looking at thousands literally. You are very professional and meticulous with your craft yet thrifty and frugal as well as Just plain down to earth and No nonsense. Love your video! will definitely be taking notes and referring as I build my own project.
Two ideas, as far as the rear bumper, good idea, you could incorporate a swing out bracket on the door side to hold a grill possibly. As well as have storage for a sewer or water hose. Other idea is to run a piece of aluminum the width of whatever table you build along the door side of the camper spaced out a bit from the wall. The table will then have a similar length metal piece to slide onto the metal on the trailer. The purpose being is to have on end of the table attached to the camper and the ability to have one leg on the other end of the table, this way it will never be wobbly wherever you park it. Think outdoor kitchen.
Ive seen some where folks use like a 'C' track for that to hold one side... I like it a lot! I do plan to make that lower cargo door into a slide out table of some sort but not totally sure of how I'll do it. But I really do like the idea of a bracket supported table. thanks Philip!
no, the diamond plate rock guard, the aluminum cladding, and the insulation are held with industrial strength tape...why do you literally exaggerate like a fool?
Wow...the trailer is looking really good...I especially like the wide accent strip! :) The bumper would be a good idea...you will need a license plate holder for it as well.
Yes, solar for sure! I have seen some really cool outdoor shower setups. I like the air powered setups that folks make with black ABS pipe for heat and some air to pressurize it. And yes, if mommas happy... we all are happy :D
Hello from Scotland, Joe your videos are so in depth and so well explained, I think what you have done is amazing and I have learned a great deal watching your videos, so thank you.
I really enjoy these videos; it kind of reminds me of the way my daddy lived. he built things and drove a truck and gardened and we had chickens. thank you for the good watch, very entertaining.
I don't speak English, I hope the translator helps. It is really incredible and wonderful, what he has achieved. I characterize myself for performing multiple tasks and I admire their incredible dedication and work. Greetings from Uruguay
you should put your logo on the back for sure, trailer looks great, nearly time for a road trip. we've had a heatwave over here, hottest it's been for 40 years, over a month with no rain, your trailer would look sweet going down the wild atlantic way drive.
Yes, i will definitely put the logo on for sure... just got to figure the right spot. And thats crazy about the weather there too. Maybe we will get a extra rain streak in leui of your dry spell ;)
thanks Daniel! I wouldn't say these are expert techniques but just what I'm figuring after researching....lol... so definitely not an expert.. but doing the best I can :)
Excellent! You are amazing and very talented! I can tell you took your time with this project. On top of everything, you showed your subscribers how you completed your work. All I can say is outstanding! If you don't mind me asking but what is your profession? Where did you learn your skills. I see everything you have done on your homestead and I am amazed of your skills.
Thanks John! As for my day job... it's a firefighter. Most of my skills are just from working on projects and learning as I go. I like to delve into things. I learned the 'figure it out' attitude from my dad and I've learned a lot of problem solving from my father in law too. The rest is just grit I guess...lol Oh yes... I acted as an owner/builder for my home and learned a lot from that too. I didn't do everything but acted as the general contractor and was involved in every process of the build. Was a great experience... learned a ton... but found out that building a home isn't as complex as one would think... but jumping through the red tape of permits and county bureaucracy (aka... bureau-crazy) is the real thing that makes building a home challenging....lol
Just perfect!Beautifull and solid . And you show that we can make our things ourselves with less off the mass production.At least thats what i'm convinced off.Grtz Belgium
Very impressive skill set and patience to pull it off. Thanks for posting the video. At 2:39, you mention a sealant tape for corners and ceiling-to-wall applications. Who makes this and what is it called?
I was so happy to get the notification that a new RV vid was up...woohooo. Great work as always. Very interesting tongue jack. I've never seen that type. Man I wish we had an Industrial Metal Supply near here. What a cool store!
Thanks! as for material costs... I will go over it in general in a questions video but it won't be down to the nitty gritty details because I haven't been that good at keeping all the receipts... lol...most of the metal was donated by industrial metal supply but I can easily figure estimates on that since Ive bought so much from them over the years.. But the quick assessement is that it will likley be more than buying a small used one but WAY less than a brand new one:)
Wow, wow, wow... 3 wows. I want to build one, but man... lot of work. I'll just have to gittr done. This video series was great. Thank you for your hard work.
I was waiting. It's an amazing job. I am a man living in South Korea .. I live in an apartment and I am envious of your working environment.What is the total weight and why did not you do the brake system? Oh, and you look handsome.
Thanks GY Kim! much appreciated :) I just checked out your trailer video.. GREAT job!! As for the weight... I'm looking to have it be in the 2200-2400lb range when finished. As for brakes.. yes, there will be brakes but I won't wire them until I get my tongue box made so that I can locate the wire harness inside that. thanks for watching and great to hear from S Korea!! Joe
thanks Cody! yes, I plan to talk about that a little bit on a questions video. I won't go into real detailed specifics but i will go over general costs I think :)
Thanks Jim! Details aren't always my strong suit but being that this thing will be on the road and subject to all sorts of weather I really want to make sure its right the first time :D
There will likely be an outdoor shower too... actually would be the preferred way so as to keep water out of the trailer. but the little shower room will be more of a place to keep a cassette toilet for emergencies, etc,. :)
Very well done. I am now on my 6th trailer over the years. They keep getting bigger. I use it for my mobile studio because I am a professional Photographer & Videographer. I need more room. I lost my tow pick up diesel Dudley from a semi backing up across my 2 lane road during a snow fall. I could not see him. Now I have to downsize. Your video is Very well done . I like it A+ pal.
Great video, nice trailer. Great tip of the curved insulation. I love the accent stripe. Are you going to add Homesteadonomics logo to the exterior walls?
Hi Raynola! Thanks, and yes I'm really happy with the strip too! As for the Logo... yep, that's the plan. I need to find a place that will make UV resistant logo decals. ... don't want it getting all brown and sun burnt after a year ;)
You are really good at that reverse jump! ;-p Builds always have more details than we guess. I like that you go with the flow and figure things out that fit the circumstance,
Thanks George! the battery storage will likely go in the tongue box when I build it. probably a couple 6v batteries or 1-2 12v batteries.. depending on where I can source the best bang for the buck :)
Looks fantastic! I have a tiny trailer too and you are doing a great job. You know one thing I wanted to mention is that in Europe they are absolute masters of the 'extended experience' so lots of awning/tented spaces that allow everything from rooftop sleeping to showering outside...etc. One small travel trailer in their hands becomes like a 1000 square foot home when they are done tenting up and unfolding everything...I felt ridiculous in my one person tent when I camped there. At any rate...they are absolutely fascinating and well worth looking at/drooling over.
Thanks Christian! I have been looking at some of the European builds.. really cool ideas... I plan to make a functional outdoor set up as that's where we will be spending most of our time :D
Project is going GREAT! Consider using wide strips of velcro for ceiling panels where your electrical will flow through--you'll have easy access to that area if needed. (This is very common on sailboats and motor yachts.) You may want to have the entire ceiling done that way. In any case, thanks for the video!
wow! now that is an interesting idea... I did plan to have the middle panel be able to be removed so I could access the wiring but was planning on just screwing it in... the velcro is something to think about!!! :)
It was just a thought. They use it quite a bit on yachts for aesthetics (i.e., not visible screws) as well as convenience. 1"+ wide pieces of Velcro running the full length of each section are strong enough, too.
definitely thinking about it. we mostly camp in cooler areas during the summer but it would be nice for longer road trips when we stay at places that offer hook ups :)
Nice video Joe! Great tutorial for a great build, especially seeing as you were transparent about areas where you are not an expert. I’m working a new project, and let me tell ya; I have ZERO experience. This shows that, with patience and a slow pace, it can be done. Thanks Joe!
First off let me congratulate you on a job well done. I always would rather see people Make their own rather than buy manufactured. I do have a question regarding your choice of insulation. Did you consider a spray - on type foam ? And if so what we're your thoughts on choosing the foam board instead. I would think foam board would be more expensive and less of an "R" value. Byt it's why I asked I'm sure you gave good reasoning behind your choice. Lastly thanks for sharing your build. It's a great project.
Thanks! I actually debated that very much ... whether to do spray in or foam board. I even had an offer for a free spray in kit. But the quick reasoning was ease and temp resistance. I was concerned about having a mishap with a foam kit and it not mixing properly and having a gooey mess on my hands. the foam board with the foil coating had the highest temp rating which was important to me since the 12v wiring will be incontact with it. Anyways, I think both are fine and the spray in would probably be better for quickness and R value.. but I'm happy with the foam board too :)
@@homesteadonomics how is it performing in regards to thermal bridging in all those areas where the framing is in direct contact with the outer shell and no insulation over it? Thanks for making these videos they are an inspiration and a good way to learn.
EXCELLENT CRAFTSMANSHIP BROTHER! I will be building a tiny home using a cargo trailer. You’ve given me many good insights to the process. 🙏🏼 thank you.
I'm hopefull that won't be the case. There aren't any gaps anywhere, unless they chewed a hole through the plywood floor... fingers crossed that doesn't happen ;)
I would most definitely put a bumper on because it's kind of like riding a Motorcycle .It's not if but when you lay 1 over .So when backing a trailer .It's not if you hit something but when .Great build Sir .
oh man.. I sure hope so Robin! btw... hows the dad life treating you... are you past the first 3 months yet... i think maybe about 1-2 months right now? Anyways, it gets easier once those first few months are past :)
So far so good. We're getting the hang of it, although each day seems to be some new challenge! She's 2 months tomorrow actually, the time's gone so quick
hi, you need a power/outlet on the doorside in the wall. Also a rail for easy mounting an awning(?) or a tent. You can get one just as a sunblock or as a complete living tent. good luck, Rob
Great Job on your Made from Scratch Travel Trailer!!! I just ordered my tee-shirt for your project and I’m excited to get it. I’m doing a build as well, but starting with a pre-made all aluminum trailer 7X14 Vnose and excited to get started on it. Thank you for sharing your adventure and skills.
Awesome Les! I'd love to hear what you do to it. Have you heard of tnttt.com? its a teardrop/tiny travel trailer forum and lots of great ideas in there. A lot of folks have done the cargo conversions and there are some really cool ideas for them there :)
homesteadonomics I have heard of the tntt.com and know a few people with some very nice little teardrop trailers. They are very nice and have some very neat ideas implemented in them. Love all the ideas out there and finding them for consideration and my build!! Thank you so much and again I wish you the very best with build and the best for you and your family!!
I would recommend flipping the bathroom and kitchen many times I get in my camper I put stuff down on the kitchen counter by the door. But as long its functional for you go for it.
Here is the link for the T-Shirt campaign for those interested :)
www.bonfire.com/travel-trailer-project-homesteadonomics/
You need to do a water test on all Windows and door
its monsoon season right now so there should be plenty of rain on it in the next few days :D
Looking for some inspiration on a dirtbike flat bed trailer I’m building. Those lights look pretty slick. Do you happen to have a link for name of the lights? Thanks -Derek
Please make me the same trailer I think it is nearly perfect
@@homesteadonomics
You didn't tell us how much money you spent on building this trailer so far.
If I didn't see you build it I would of thought you bought it great job.
haha.. thanks! much appreciated mike
Love the pizza cutter trick for trimming the butyl tape. Prime example fo your clever mind at work. Well done!
Wow, that's a very professional job...well done.
thank you James!
Don´t fool yourself people. Skilled guys like this dude makes everything seem easy. Good job buddy!
Quality work over speed 'anyday!' An enjoyable, informative video. Thanks! : )
thanks J JO! I agree totally.... Ive done enough projects fast... only ending up needing to revisit them later for repairs that now I try and make sure its done right the first time :)
Joe
I enjoy monsoon videos and how water catchment systems are working. It is that time of year and would like to see another, they are fun.
That's what I'm scrambling to get working on with the monsoons here :D
Wow, Amazing work. You outdid yourself.
Thanks Joseph! :D
Great Job!! Somehow you are doing this not only for your family, but also encouraging everyone who have a DIY project to make it become real.
Thanks a lot for your sharing!
It looks like it came from a factory! Really great job. Thanks for sharing this.
Thank you John! My goal was to make something that my wife wouldn't shudder at when I hook it up ;)
Hi,you have to be the neatest cleanest tradesman I think I have seen.looking at your work and looking inside your shed is amazing.Keep up the good work and I look forward to watching your future projects.
Cheers, Kevin.
haha thanks Kevin... but that is a compliment that I certainly don't deserve.. you should see the table that i've been keeping all the tools on near the trailer..... its a mess...lol
Thanks for letting me see what you were doing for sealing and trimming the side-to-side and roof-to-side joints. That part has always troubled me as I see it as one of the most difficult and necessary jobs. If you don't get it right, water will find a way in to stain the ceiling and walls , as well as start rot on all the framework and cabinetry.looks like another great video of a great project. Thanks again Joe and I'll be watching for that next rainwater harvesting video.
Thanks! yes, that was one aspect that kept me up at night making sure it was sealed as best as I could figure :)
homesteadonomics what is the name of the sealant tape that you used
@@homesteadonomics what is the name of the sealant tape that you used?
I liked simply for that intro. Laughing my rear off. That exterior looks slick already. Cant wait to see the rest of these videos.
Great job, Joe. It looks amazing and thanks for taking us along on this build.
Thanks Daniel! I really appreciate you watching... it's been tiring but still a lot of fun :)
certainly the most totally satisfying video serie on youtube. I ca't wait for the next video.
Thanks Vic! That is very kind of you to say! Thank YOU!!!
Joe
Beautiful work Joe!
Thanks Dimitri!
You are a high level craftsman, excellent skills which are only obtained by doing.
Great job, looking forward to the finished product. Looks like you'll have an all season rig.
thanks Bob! I'm hoping we can use it at all times of the year :)
That is by far the best do it yourself job I’ve ever seen, Very professional. Can’t wait to see the finish!
The slope on the bottom in the back is one of the best features of the trailer. I had a single axle camper that would drag the back with just the slightest dip in a driveway or crossing over a road that was slightly higher. I noticed other people with similar campers actually put a wheel on the bottom of the back bumper to counter this issue.
yep, thats what my father in law advised... the clearance issue is a common problem going over uneven ground and entrances
A Lazy Primitive Agreed that was the first thing that jumped out at me I think there’s a lot of experience driving with the trailer by this fabricator
You're definitely raising your craftsmanship to a whole new level! Cool shirts too....
thanks Dave! Much appreciated!
lookin' great! I'm not surprised that it's taken a bit longer ... lots of details in there, man
thanks! yes, waaay longer than I anticipated... lots of little things that need to be done or figured out..lol
the camper is coming along great!!! your killing it!!!
just put my door on yesterday. what a sense of accomplishment a door makes. decided to go a different route on mine. 2x4 construction, completely rounded ends, 18 feet long. i have a feeling it will be my permanent home. major decision, it'll be my last build. i'm young, sort of, retired, and i have let my life pass me by. i want to see what i missed along the way. except for my welders and plasma cutter, i think my tools are going up for sale. after this one, i really dont want to build anything else. no fun building alone. when i get done, i'll link a video, i want your opinion. cant do a full video like you did, wicked southern accent that would be full of quite colorful language...
again, your doing an awesome job.
Mark Cobb thanks mark!
Yep the door adds quite a bit! Sound like a cool project...and don’t worry about it colorful language...can’t say I haven’t let a few choice words go during this build 😉😂👍
i had some video going but the camera met an unfortunate accident, followed by several of those choice words. i could have done a what not to do ##*$#^ video.
sad thing is, i have a single axle out there and enough steel to build another trailer base. thinking about building a small version of the big camper. since the big camper is shaped like a pill, i may paint them blue and call it the viagara racing team. you will see me going down the interstate with 80 elderly couples following.
are you planning to have a shower attached somewhere? and are you going to designate a spot for a port a potty? they are life changing necessities and some campgrounds are restrictive on self contained campers. the port a potty can be set on rollers and hid under a cabinet. cassette style, from 60 to 150. insta heat showers around 140. winter camping has been tough with an outside shower and a major decision in the new build for me.
Looks really good Joe... I am sure you and your family will put it to good use making some wonderful memories... Congrats on a great build... Peace
Thanks Mark! I really appreciate it. Yes, hopefully we'll have many many years of great trips with it :)
Fellow Arizonian here, great work! Your videos are structured well, easy to watch, and that trailer is going to be far better than anything you can buy off a lot.
It seems you have forgotten your wiring for a lighted license plate bracket. In the wheel wells, (from inside), I'd spray everything with rubberized undercoating. 2 layers everywhere along the edges. It makes for a great seam sealer and kills any issues with condensation on the inside of the steel fender.
I actually have a tail light that has a license plate light.. that will either go on the bumper (deciding still if I will make one) or the low side. It's powered by the running/tail wire. No specific wire for just a license plate light. I do like the idea of the rubber undercoating spray though.. thanks Steve! :)
homesteadonomics me too, probably helps with road beat up too, good ole rubber...thanks Steve
I used to work in the fab shop building top end travel trailers, your craftsmanship is far superior to theirs, excellent job!
Dude! Looks awesome! Missed seeing your notifications. Hope to see more soon,
Thanks John! I hope to get more videos up as soon as I can so you can have more notifications ;)
I saw another video where the trailer was about the same size as yours. They installed a tiny bathroom in the corner like caddy-corner with an accordion style door. He hung the shower head right over the toilet so that you just have to stand next to the toilet or sit on top of the toilet lid to shower then stand up to clean and rinse your bum lastly. The water drains out through the drain in the floor. Then, a tiny sink next to the toilet just big enough to wash your hands and brush your teeth. A cover over the toilet paper roll that you can pull down to keep it dry while you shower. He also left the top open just below the ceiling for light to penetrate. I hope this gives you some ideas. Although small, it gives you what you need. Great videos, all of them. Teaches me a lot. Thanks for sharing.
im diggin' it so far, pretty nice for a weekend camper, interested to see this through, a bathroom w/ shower will be tight !
thanks Tory! the bathroom and shower will be the last things to go in as I'm not totally sure how to set it up... but it will be pretty basic... no black tank, just a cassette toilet for emegencies...haha... I prefer the great outdoors for me, so its mostly for my daughter... and wife at night if its raining :)
Nice work, I am amazed at the variety of products and the low prices you pay for them in the US. Even an R9 insulation value is unheard of here.
Yo Joe, your travel trailer is lookin incredible buddy!!! 👍👍. You could always put your logo on the side of the trailer. Just a thought..
You ARE a one man construction crew my friend! You're doing a fantastic job. ☆Jay 😀👍👍
I agree. The logo would look great on there!
Hey Jay! Thanks buddy!! I'm currently trying to decide whether I'll have it on the side or back... or both. I don't want to over do it but I think it would look cool! Just need to find the right logo outfit that can make one that is really UV resistant. From my research most all the decal places 'say' their decals are UV resistant but when I see them on vehicles, some look great and some look sun burnt... defintiely dont want the logo getting all faded or burnt after a year in our weather...lol
homesteadonomics a shop that does wraps in your area should be able to do that.
Silver Grizzly homesteadonomics well another tidbit for those nomading or just cargo safety, put something on them. People don't trust nondescript vehicles and they garner much curiosity. I personally wonder what's going on and make a point of watching and avoiding any vehicle I can be snatched into. It doesn't matter what it says, people just register some association and feel less threatened resulting in loss of interest. You could write "Grandma eats butt" and they'll assume it's a bakery delivery van or something akin..😏 It's our messed up society but IMPORTANT for many reasons.. God bless
Dormitorio ambulante
Best looking homebuilt I've seen. Great job!
thanks RS!!
Joe< excellent work! by far the most boss DIY Camper trailer I've seen so far and Ive been looking at thousands literally. You are very professional and meticulous with your craft yet thrifty and frugal as well as Just plain down to earth and No nonsense. Love your video! will definitely be taking notes and referring as I build my own project.
Two ideas, as far as the rear bumper, good idea, you could incorporate a swing out bracket on the door side to hold a grill possibly. As well as have storage for a sewer or water hose. Other idea is to run a piece of aluminum the width of whatever table you build along the door side of the camper spaced out a bit from the wall. The table will then have a similar length metal piece to slide onto the metal on the trailer. The purpose being is to have on end of the table attached to the camper and the ability to have one leg on the other end of the table, this way it will never be wobbly wherever you park it. Think outdoor kitchen.
Ive seen some where folks use like a 'C' track for that to hold one side... I like it a lot! I do plan to make that lower cargo door into a slide out table of some sort but not totally sure of how I'll do it. But I really do like the idea of a bracket supported table. thanks Philip!
That project is looking very sharp my friend. Great work.
Thanks Jerry!
omg this guys trailer is literally just held together by tape i hope that's good stuff man it looks good i'm just worried
no, the diamond plate rock guard, the aluminum cladding, and the insulation are held with industrial strength tape...why do you literally exaggerate like a fool?
@@douglasharley2440 how is calling tape tape exaggerating like a fool?
between heat, flex and vibration all adhesives break down
You are a true craftsman. Looks great!
thanks Willie!
Wow...the trailer is looking really good...I especially like the wide accent strip! :)
The bumper would be a good idea...you will need a license plate holder for it as well.
Thanks Greg! I do too!!! and yes, there will be a license plate holder too :)
Really glad you put the lights the way you did your Mr. Build your build is coming a long perfectly fine thumbs up my friend
Looks good, all you need is some solar panels on the roof and a outside shower off the rear end.
Remember, keep momma happy! 😁
Yes, solar for sure! I have seen some really cool outdoor shower setups. I like the air powered setups that folks make with black ABS pipe for heat and some air to pressurize it. And yes, if mommas happy... we all are happy :D
Hello from Scotland, Joe your videos are so in depth and so well explained, I think what you have done is amazing and I have learned a great deal watching your videos, so thank you.
Don’t forget a porch light, and an LED light bar on the back facing rear for backing up and security.
I do plan on adding lights to the porch and surrounding sides :)
I really enjoy these videos; it kind of reminds me of the way my daddy lived. he built things and drove a truck and gardened and we had chickens. thank you for the good watch, very entertaining.
Very good work .
thank you James!
I don't speak English, I hope the translator helps. It is really incredible and wonderful, what he has achieved. I characterize myself for performing multiple tasks and I admire their incredible dedication and work. Greetings from Uruguay
you should put your logo on the back for sure, trailer looks great, nearly time for a road trip. we've had a heatwave over here, hottest it's been for 40 years, over a month with no rain, your trailer would look sweet going down the wild atlantic way drive.
Yes, i will definitely put the logo on for sure... just got to figure the right spot. And thats crazy about the weather there too. Maybe we will get a extra rain streak in leui of your dry spell ;)
Outstanding! Finally someone on youtube, that knows how to build an awesome trailer; And is willing to share detail knowledge. Thanks Joe!
thanks Daniel! I wouldn't say these are expert techniques but just what I'm figuring after researching....lol... so definitely not an expert.. but doing the best I can :)
Excellent! You are amazing and very talented! I can tell you took your time with this project. On top of everything, you showed your subscribers how you completed your work. All I can say is outstanding! If you don't mind me asking but what is your profession? Where did you learn your skills. I see everything you have done on your homestead and I am amazed of your skills.
Thanks John! As for my day job... it's a firefighter. Most of my skills are just from working on projects and learning as I go. I like to delve into things. I learned the 'figure it out' attitude from my dad and I've learned a lot of problem solving from my father in law too. The rest is just grit I guess...lol
Oh yes... I acted as an owner/builder for my home and learned a lot from that too. I didn't do everything but acted as the general contractor and was involved in every process of the build. Was a great experience... learned a ton... but found out that building a home isn't as complex as one would think... but jumping through the red tape of permits and county bureaucracy (aka... bureau-crazy) is the real thing that makes building a home challenging....lol
Just perfect!Beautifull and solid . And you show that we can make our things ourselves with less off the mass production.At least thats what i'm convinced off.Grtz Belgium
The trailer is looking great Joe! Thanks for sharing the video.😎👍JP
thanks JP!
You're very welcome Joe! 😎
A Truely Excellent Tuition How-To video, - not only are you a great RV van maker, you also make superb videos, Thank you very much.
Very impressive skill set and patience to pull it off. Thanks for posting the video.
At 2:39, you mention a sealant tape for corners and ceiling-to-wall applications. Who makes this and what is it called?
I think it might be this:
ua-cam.com/video/7GMI-RSemd8/v-deo.html
MAD RESPECT MAN. that thing came out like the ones you see at the RV dealer
It's finally done nice job
thanks!!! ... but, maybe about half way done ;)
+homesteadonomics I ment with the exterior I'm excited to see your interior work thoe
i'm guessing a Murphy bed?
I was so happy to get the notification that a new RV vid was up...woohooo. Great work as always. Very interesting tongue jack. I've never seen that type. Man I wish we had an Industrial Metal Supply near here. What a cool store!
Oh man... IMS is the BEST! Love going there...haha.. was just there Monday to check out the diamond plate for the tongue box!
amazing job
you should include all the material cost and compare with buying a new one
Thanks! as for material costs... I will go over it in general in a questions video but it won't be down to the nitty gritty details because I haven't been that good at keeping all the receipts... lol...most of the metal was donated by industrial metal supply but I can easily figure estimates on that since Ive bought so much from them over the years..
But the quick assessement is that it will likley be more than buying a small used one but WAY less than a brand new one:)
Wow, wow, wow... 3 wows. I want to build one, but man... lot of work. I'll just have to gittr done. This video series was great. Thank you for your hard work.
I was waiting. It's an amazing job. I am a man living in South Korea .. I live in an apartment and I am envious of your working environment.What is the total weight and why did not you do the brake system? Oh, and you look handsome.
Thanks GY Kim! much appreciated :) I just checked out your trailer video.. GREAT job!! As for the weight... I'm looking to have it be in the 2200-2400lb range when finished. As for brakes.. yes, there will be brakes but I won't wire them until I get my tongue box made so that I can locate the wire harness inside that.
thanks for watching and great to hear from S Korea!!
Joe
I think you will appreciate the extra insulation, good Idea
Awesome project and channel! Do you plan on adding a cost breakdown at the end of the series?
thanks Cody! yes, I plan to talk about that a little bit on a questions video. I won't go into real detailed specifics but i will go over general costs I think :)
Two thumbs up! I love the attention to detail. Great work Joe!
Thanks Jim! Details aren't always my strong suit but being that this thing will be on the road and subject to all sorts of weather I really want to make sure its right the first time :D
If it were me i would save room inside and do an outdoor shower and some kind of cool curtain solution just my 2 cents
There will likely be an outdoor shower too... actually would be the preferred way so as to keep water out of the trailer. but the little shower room will be more of a place to keep a cassette toilet for emergencies, etc,. :)
Very well done. I am now on my 6th trailer over the years. They keep getting bigger. I use it for my mobile studio because I am a professional Photographer & Videographer. I need more room. I lost my tow pick up diesel Dudley from a semi backing up across my 2 lane road during a snow fall. I could not see him. Now I have to downsize. Your video is Very well done . I like it A+ pal.
Great video, nice trailer. Great tip of the curved insulation. I love the accent stripe. Are you going to add Homesteadonomics logo to the exterior walls?
Hi Raynola! Thanks, and yes I'm really happy with the strip too! As for the Logo... yep, that's the plan. I need to find a place that will make UV resistant logo decals. ... don't want it getting all brown and sun burnt after a year ;)
You are really good at that reverse jump! ;-p Builds always have more details than we guess. I like that you go with the flow and figure things out that fit the circumstance,
Been eagerly awaiting this video. Glad you finally go to it. Love the trailer. What are you going to do for battery storage?
Thanks George! the battery storage will likely go in the tongue box when I build it. probably a couple 6v batteries or 1-2 12v batteries.. depending on where I can source the best bang for the buck :)
Good Job!! Your trailer looks professional! I'm admiring it.
I love ur channel
thank you Carlos!
Looks fantastic! I have a tiny trailer too and you are doing a great job. You know one thing I wanted to mention is that in Europe they are absolute masters of the 'extended experience' so lots of awning/tented spaces that allow everything from rooftop sleeping to showering outside...etc. One small travel trailer in their hands becomes like a 1000 square foot home when they are done tenting up and unfolding everything...I felt ridiculous in my one person tent when I camped there. At any rate...they are absolutely fascinating and well worth looking at/drooling over.
Thanks Christian! I have been looking at some of the European builds.. really cool ideas... I plan to make a functional outdoor set up as that's where we will be spending most of our time :D
Add some wiring for a backup camera, venting for the roof .
got a roof vent.. will be putting it in in the part 4 or 5 video with the 12v wiring :)
WATCHED THIS LAST YEAR. SAVED IT AND JUST FOUND YOU AGAIN. TOTALLY INSPIRING. YOU DID A GREAT JOB ON YOUR BUILD. I WANT TO DO ONE NOW. KEEP IT UP.
Don't forget a spare tire and a license plate light.
go the spares and the license plate light is will one of the extra tail lights that i will add :)
Excellent use of double-sided tape. Thanks for the idea.
Nice Trailer..
where did you buy it?
just kidding
Good Job
LOL
Rover101 from the homesteadonomics general store 😉
wish i had a general store like this in Lachine Québec ;-)
I wish you had a general store! I think I have suggested that more than a few times!
Project is going GREAT! Consider using wide strips of velcro for ceiling panels where your electrical will flow through--you'll have easy access to that area if needed. (This is very common on sailboats and motor yachts.) You may want to have the entire ceiling done that way. In any case, thanks for the video!
wow! now that is an interesting idea... I did plan to have the middle panel be able to be removed so I could access the wiring but was planning on just screwing it in... the velcro is something to think about!!! :)
It was just a thought. They use it quite a bit on yachts for aesthetics (i.e., not visible screws) as well as convenience. 1"+ wide pieces of Velcro running the full length of each section are strong enough, too.
Eu quero fazer o meu 👏🏼👏🏼👏🏼🇧🇷
I want build one for me
Thanks Alessandro! Great to hear from Brasil!
Joe
Keeps turning out better and better! Great work!
Zero Cool thanks Zc!!!
awesome trailer....now build one for me..please please haha
thanks! but you better get your order in quick as the limited run of one is fast closing ;)
Ady Unixmoment It's easier to build one from a cargo trailer, this guy is a dope.
Campervan Elvis I toof on you haha...I guess I am😂
Damn, that is turning out nice! Looks like a professional trailer shop built it!
thanks Mike!!
Are you going to install ac? I think ull need it.
definitely thinking about it. we mostly camp in cooler areas during the summer but it would be nice for longer road trips when we stay at places that offer hook ups :)
Nice video Joe! Great tutorial for a great build, especially seeing as you were transparent about areas where you are not an expert. I’m working a new project, and let me tell ya; I have ZERO experience. This shows that, with patience and a slow pace, it can be done. Thanks Joe!
First off let me congratulate you on a job well done. I always would rather see people Make their own rather than buy manufactured. I do have a question regarding your choice of insulation. Did you consider a spray - on type foam ? And if so what we're your thoughts on choosing the foam board instead. I would think foam board would be more expensive and less of an "R" value. Byt it's why I asked I'm sure you gave good reasoning behind your choice. Lastly thanks for sharing your build. It's a great project.
Thanks! I actually debated that very much ... whether to do spray in or foam board. I even had an offer for a free spray in kit.
But the quick reasoning was ease and temp resistance. I was concerned about having a mishap with a foam kit and it not mixing properly and having a gooey mess on my hands. the foam board with the foil coating had the highest temp rating which was important to me since the 12v wiring will be incontact with it.
Anyways, I think both are fine and the spray in would probably be better for quickness and R value.. but I'm happy with the foam board too :)
@@homesteadonomics how is it performing in regards to thermal bridging in all those areas where the framing is in direct contact with the outer shell and no insulation over it? Thanks for making these videos they are an inspiration and a good way to learn.
EXCELLENT CRAFTSMANSHIP BROTHER! I will be building a tiny home using a cargo trailer. You’ve given me many good insights to the process. 🙏🏼 thank you.
Excelente👏👏👏👏👏👏👏👏👏
Thanks Javier!
Pretty F'n impressive. Love to see work like this on UA-cam. Love your attention to detail. Beautiful job!
Nice... ok tell the truth which dealership did you buy it from? 😂.. Nice Very Nice. Sharp pre-planning on your wiring.
I got it from the "HCTT Dealership" ... homesteadonomics custom travel trailers.....lol.....Thanks Myles!
Myles Yoshimoto no dealership actually waterproofs that well...if you want it done right...ya’ know.
Burleigh here from the UK …. very well presented No over powering music too. Keep up the good work
Can mice get in the wall and chew up that foam board?
I'm hopefull that won't be the case. There aren't any gaps anywhere, unless they chewed a hole through the plywood floor... fingers crossed that doesn't happen ;)
Sky light would be nice for more natural light. Looks great, love the way you have a need/want and then build it yourself.
I will have a roof vent (will go in during the 12v wiring... so that will provide some natural light...
thanks for checking it out Tony!
Класс молодчина ..... лайк
I would most definitely put a bumper on because it's kind of like riding a Motorcycle .It's not if but when you lay 1 over .So when backing a trailer .It's not if you hit something but when .Great build Sir .
Silicone, weatherproof tape, butyl tape AND aluminium trim...forget weather proof, it's hurricane proof!
oh man.. I sure hope so Robin! btw... hows the dad life treating you... are you past the first 3 months yet... i think maybe about 1-2 months right now? Anyways, it gets easier once those first few months are past :)
So far so good. We're getting the hang of it, although each day seems to be some new challenge! She's 2 months tomorrow actually, the time's gone so quick
Your build looks better than the "professional" builds. WELL DONE!
Thanks Tina! I'm trying to make something my wife won't be embarrases for us to tow around :)
Beautiful tutorial. Thank you. I'm repairing my caravan that has had an accident and these videos are very useful for me
hi, you need a power/outlet on the doorside in the wall. Also a rail for easy mounting an awning(?) or a tent. You can get one just as a sunblock or as a complete living tent. good luck, Rob
thanks.. yes the 12v will be in the next video and the awning is still under consideration too:)
wow! really coming together! Great Job!
Thanks Ryan!
You did EXACTLY what I was researching on trim, sealant issues solved.
Awesome!!!
Great Job on your Made from Scratch Travel Trailer!!! I just ordered my tee-shirt for your project and I’m excited to get it. I’m doing a build as well, but starting with a pre-made all aluminum trailer 7X14 Vnose and excited to get started on it. Thank you for sharing your adventure and skills.
Awesome Les! I'd love to hear what you do to it. Have you heard of tnttt.com? its a teardrop/tiny travel trailer forum and lots of great ideas in there. A lot of folks have done the cargo conversions and there are some really cool ideas for them there :)
homesteadonomics I have heard of the tntt.com and know a few people with some very nice little teardrop trailers. They are very nice and have some very neat ideas implemented in them. Love all the ideas out there and finding them for consideration and my build!! Thank you so much and again I wish you the very best with build and the best for you and your family!!
I would recommend flipping the bathroom and kitchen many times I get in my camper I put stuff down on the kitchen counter by the door. But as long its functional for you go for it.