Turn little scrap logs into cash.

[@fredgilliver1821]

Very good use of small logs William

[@William_Kenny]

Thank you Fred 👍😊

[@redkite200]

Smashing work William. Won't be long before I have a go at this myself. Cheers!

[@William_Kenny]

Cheers mate appreciate you watching 👍 😊

[@halmartin7668]

GREAT job William, those are nice scoops. I've not seen the technique you used with the chuck before. Nice disc sander and table. Thanks.

[@William_Kenny]

Cheers hal thanks for watching mate 👍 😊

[@eamonkenny3324]

Well done Bill 👍

[@William_Kenny]

Cheers buddy 👍 😊

[@raydriver7300]

Such clever ideas. So interesting. Thank you for sharing your knowledge and expertise 🌞

[@William_Kenny]

You are so welcome Ray thanks for watching hope you're keeping well,
Kind regards From Will 👍

[@MikeHolton]

Nice Scoops Will! Can you do me a favour please? Next time you are in your workshop can you tell me how much room you have between your lathe and the back all where your tools are? Just trying to plan the new workshop lol 😀

[@William_Kenny]

Sure thing Mike 👍

[@darrenoneil2455]

Good project.

[@William_Kenny]

Thank you Darren 👍😊

[@RobertCochrane-tj6kn]

Great work William

[@William_Kenny]

Thanks very much Robert, appreciate you watching 👍

[@MichaelKruger-u6o]

Would like to see how you center the scoop and hold it when you cut it with the bandsaw

[@William_Kenny]

Cheers Michael thanks for popping in for a look, I just cut them freehand down the middle with the bandsaw with a 6tpi blade on, I don't use any jig, now I did mess up one or two at the start 😆 I must make a little jig for a future video,
Kind regards From Will 👍

[@jimborstock6281]

Great overview/explanation. Excellent way to make something from a simple log. Thanks for sharing.

[@William_Kenny]

Thanks ever so much, Jim. I always keep the little bits of wood, as you see, they can be put to good use,
Kind regards From Will 👍

[@duster.]

Great video, great ideas.

[@William_Kenny]

Thanks ever so much. I'm glad you liked it,
Kind regards From Will 👍

[@duster.]

@@William_Kenny Hi Will, I've subscribed and will browse your videos over the next few days. I was really impressed with your ingenuity. I suffer with chronic sciatica and can't stand at my lathe for hours as I used too. Smaller projects mean I can carry on turning.

[@hccdoc]

Thanks, William! Lovely little project. Carefully crafted as always. Thanks!

[@William_Kenny]

Thanks very much glad you liked it, kind regards from will 👍😊

[@roncooney8526]

Great little project for craft shows. Also a good skill builder.

[@William_Kenny]

Thanks very much appreciate you taking the time to watch,
Kind regards From Will 👍

[@JenM-t3x]

Love the scoops, they are a great use of cuttings from your trees! I know I would buy some at the craft fair : ) Thank you for sharing William. Brilliant job!

[@William_Kenny]

Aaah, thanks very much. I appreciate you watching and commenting,
Kind regards From Will 👍 😊

[@chetnash5991]

Quick and easy! I wish we were taught this in school woodshop

[@William_Kenny]

For sure, thanks for watching,
Kind regards From Will 👍🙂

[@BBTurning]

Damn nice little project WIlliam, they look great.
Shay

[@William_Kenny]

Thanks very much shay got the idea from the wonderful Richard Raffan, 😊👍

[@donboche1672]

Now that is my kind of New Year fireworks! Love the bowl and I really appreciate the time you take with us. Thank you!

[@William_Kenny]

Thanks ever so much, I appreciate you taking the time to watch,
Kind regards From Will 👍

[@LindaMcNew-g3s]

very nice job, enjoyed

[@William_Kenny]

Thanks very much linda, appreciate you watching,
Kind regards From Will 👍

[@johnvturner]

Beautiful!

[@William_Kenny]

Thank you 😊

[@leeallison5655]

You are an excellent teacher! Clever creation of the tools you need to do your project. Thanks!

[@William_Kenny]

Thanks ever so much, appreciate you taking the time to watch,
Kind regards From Will 👍

[@curtisjasper8684]

Great little project. I would have liked it if you would shown us how you cut it in half on the band saw.

[@William_Kenny]

Thank you, I didn't use anything fancy. Just cut it freehand down the middle, now I did mess up one or two 😆
Cheers From Will 👍

[@loriboldt6171]

Hi Will. This project is a great idea and your ways of teaching are really nice! Love your sanding disc's and table!!! Thank you very much!

[@William_Kenny]

Very kind of you to say, thank you very much for watching,
It's much appreciated,
Kind regards From Will 👍

[@brentbeacroft3363]

Great little item well explained . Well done William

[@William_Kenny]

Thanks very much Brent a fun and useful little project 😊👍

[@corymichaels8670]

Finally, a productive use of all my little cutoffs and the “logs” the grandkids bring me :) Just never thought of using the chuck with one jaw removed. I truly hate making jam checks when there are multiple items that all vary in size.

[@William_Kenny]

Appreciate you watching, I try and find a use for all the odds and ends 😊👍

[@dontcare3430]

Nice sanding arrangement.
Ill have to try that
Thanks!

[@William_Kenny]

Thank you, it's simple to make and very effective,
Cheers From Will 👍

[@jrcarl61]

Very nice work. Who doesn’t love a nice wooden scoop?

[@William_Kenny]

Thank you kindly appreciate you taking the time to watch 👍😊

[@tamaraadams7072]

Thanks so much, love the little cherry scoops!

[@William_Kenny]

Thanks ever so much, appreciate you watching,
Kind regards From Will 👍

[@peterreidy603]

Thanks for a great lesson.
Excellent use of waste left overs (waste not, want not).
How long do you dry your garden pruning off cuts before turning?
Cheers

[@William_Kenny]

Thanks very much Peter, it usually takes a few years to dry, but it doesn't have to be completely dry because you're turning it small and fairly thin, so after sanding, it's usually perfect,
Cheers From Will 👍

[@peterreidy603]

@ thanks for the very speedie response, look forward to more of your videos. Thanks

[@William_Kenny]

@@peterreidy603 your very welcome 👍

[@HonorMacDonald]

I was searching some videos for learning wood turning, and this thumbnail caught my attention - so I watched. I've now watched several of your other videos and subscribed, but I thought I'd comment on this one. :)
As someone interested in learning about this (and also just enjoys watching skilled crafting) I quite appreciate your narrative style, and your ability to put words to the skill you're showing.
But, also, as someone who knows more about graphics and video production than I do about wood turning, I also want to say I really like your camera and lighting set up, your production is very clean, and your editing is beautiful, and never gets in the way. I think a lot of people don't appreciate how much effort goes into making production and editing so natural it's invisible during the viewing process.
Thank you, and I'm looking forward to watching more. :)

[@William_Kenny]

Wow thank you so much I'm glad you like my videos, I always strive to improve on them when I can, I appreciate you watching, subscribing, and for the very positive feedback, wishing you all the best with your turning feel free to reach out if you need any help,
Kind regards From Will 👍 😊

[@AndrewR74]

Great little project, thank you for sharing.

[@William_Kenny]

You're very welcome Andrew, appreciate you watching,
Kind regards From Will 👍

[@torekvalheim7207]

Outstanding spoons and craftmanship. Happy New Year from Norway 🙂

[@William_Kenny]

Thanks ever so much. I appreciate you watching,
And happy new year from Ireland 🇮🇪

[@agkwoodworks3136]

Very nicely done William , good idea using the chuck jaws 👍👍

[@William_Kenny]

Thanks very much Andrew 👍 😀

[@copperowlwoodturning5929]

Beautiful spoons William. They match perfectly too. The others look great as well.

[@William_Kenny]

Thanks very much Rob, appreciate you watching and commenting,
Kind regards From Will 👍

[@jimkelly8473]

Nevr thought of turning logs into spoons... Thank you for sharing.. Will difinitely will try your idea, thanks again.

[@William_Kenny]

Thanks very much Jim appreciated, give it a go a fun little project to turn,
Cheers From Will 👍

[@STMwoodturning]

Excellent idea and relatively simple method. Thanks for sharing 😊

[@William_Kenny]

Your very welcome and thanks for watching 😊👍

[@peterrauch6604]

Very creative, William! Thanks for sharing your skill.

[@William_Kenny]

Thank you kindly appreciate you taking the time to watch,
Kind regards From Will 👍

[@598101]

Excellent, very well explained. Thank you 😊

[@William_Kenny]

Thank you kindly appreciate you taking the time to watch,
Kind regards From Will 👍

[@markwalsh3561]

William, Greeting from PEI Canada.Thanks for that project. I always learn something in all your videos.
Mark Walsh

[@William_Kenny]

Thanks very much Mark I appreciate you watching mate, I started my woodturning journey watching UA-cam so I glad to be able to give something back,
Kind regards From Will.👍😊

[@Lady_of_Ishpeming]

I've always wondered how those were made. Love ❤it! Thank you for sharing.

[@William_Kenny]

Thanks ever so much appreciated,
Kind regards From Will 👍

[@Lady_of_Ishpeming]

@William_Kenny I will be getting a lathe in the near future. I'm in the process of buying a new home. After everything is moved and settled in, I'll be looking forward to giving turning a try.

[@William_Kenny]

@Lady_of_Ishpeming that's great it's such a wonderful hobby, best of luck with the move,
Cheers From Will 👍😊

[@luvwud]

Nice one William, well explained with options. Always helps . Cheers Geoff

[@William_Kenny]

Thanks very much Geoff appreciate you watching mate 👍

[@William_Kenny]

Thanks very much Geoff appreciate you watching mate 👍 😊

[@cindynavarro9980]

This is the second of your videos that I have watched and they are very nicely done. Nice projects.

[@William_Kenny]

Thank you kindly Cindy appreciate you watching, I try and do a video every week,
Kind regards From Will 👍

[@awwoody]

Smashing work as usual Willy 🙌 great use for small bits of scraps 👌👌

[@William_Kenny]

Cheers buddy thanks for watching it's much appreciated 👍

[@PeterHellak]

Thanks for a new way to use stuff that has little value as firewood and that will provide me with a new spindle challenge, I like the idea of using a chuck to hold the scoops instead of countless jam chucks cheers and thanks from down under

[@William_Kenny]

Thanks very much, Peter. I'm glad you found it useful nice comments like this inspires me to do these little videos,
Kind regards From Will in Ireland 🇮🇪

[@stuartbruton48]

Great demo, lovely little project. Many thanks for sharing 👍

[@William_Kenny]

Thank you kindly Stuart appreciate you watching mate 👍

[@WanderingNature]

So beautiful ❤🎉

[@William_Kenny]

Thank you kindly 😊

[@terryprice2991]

Thanks William great job and will be trying this out from Iowa USA Thank Again !

[@William_Kenny]

Thanks very much terry, happy and safe turning,
Kind regards From Will,
Carlow Ireland 🇮🇪 ...

[@DougMilleratWoodSpunRound]

These scoops are excellent! Well done!

[@William_Kenny]

Thanks very much doug appreciate you taking the time to watch mate 👍

[@RG-ce5hj]

Great video! 👍. How do you keep the jaws from leaving marks on the bowl ?

[@William_Kenny]

Thanks very much. I appreciate you watching, I don't over tighten, and if I use a softer wood, I sometimes place a small leather strip in the jaws, the odd time I do get a little mark but you can sand it away quite easily,
Kind regards From Will 👍

[@anthonygreen9609]

Well done William. That's something I will have a go at when the floor is finished in my workshop.

[@William_Kenny]

Thanks very much Anthony a fun and simple little project and a great little seller also 😀 👍

[@RG-ce5hj]

A little variation makes them unique 👍👍

[@William_Kenny]

Thank you kindly, appreciate you popping in for a look,
Kind regards From Will 👍

[@BryanMapstone]

A really great idea for using up branch wood. Thanks

[@William_Kenny]

Cheers Bryan thanks for watching mate 👍

[@WeeVal]

Their brilliant Willie! And congratulations! 😃

[@William_Kenny]

Aaah cheers val 😊👍

[@mashmade-airth]

They're cracking William. Nice one mate 👍

[@William_Kenny]

Cheers mate thanks for watching 😊👍

[@annlaurie1484]

Nice scoops, good idea for small pieces of wood.

[@William_Kenny]

Thanks very much Ann 👍

[@philhorakjr1652]

Nice. Prolly will make these... In between epoxyresjn bowls.

[@William_Kenny]

Thanks very much. It's a fun little project to turn and a useful little item at the end,
Cheers From Will 👍

[@davejohnson9495]

Thanks for a very well made spoon and a great tutorial. Will definitely give this a try.

[@William_Kenny]

Your very welcome dave thanks for popping in for a look it's much appreciated,
Kind regards From Will 👍

[@SampaguitaBates]

You are so delightful to watch. :)

[@William_Kenny]

Thanks ever so much, appreciate you taking the time to watch,
Kind regards From Will 😊👍

[@oleksiypokotylo7323]

Nice project William! Thanks for sharing.

[@William_Kenny]

Your very welcome thanks for taking the time to watch,
Kind regards From Will 👍

[@josereines]

Thank you. very good and interesting work.

[@William_Kenny]

Thank you kindly appreciate you watching 👍🙂

[@Dore60]

Nice job William. Thanks for sharing 👍

[@William_Kenny]

Cheers Andy 👍

[@WoodturningWithJohnMarro]

Nice project! Thanks for sharing

[@William_Kenny]

Thanks very much John 👍

[@danslejardindecytrus]

Merci beaucoup pour cette très belle vidéo et très bon dimanche ! 🌟

[@William_Kenny]

thank you very much 👍👍

[@danslejardindecytrus]

@@William_Kenny You're welcome! 🖐🖐🙏🙏

[@brentlarson9451]

Great project and I like the jigs you made. Very creative and useful ideas.

[@William_Kenny]

Thanks very much. I'm glad you liked it,
Cheers From Will 👍

[@pablolynch1152]

Great job

[@William_Kenny]

Thanks very much,
Will 👍

[@stanmalbon2511]

Going to try that.your scoops look great..😊

[@William_Kenny]

Thanks very much, let me know how you get on,
Cheers From Will 👍

[@TheDistur]

Nice scoops!

[@William_Kenny]

Thanks very much 👍😊

[@roystheboy]

They look great William

[@William_Kenny]

Cheers Roy much appreciated mate 👍

[@RichardP1966]

Great wee project William, might have too try a few.

[@William_Kenny]

Give a go a great little seller at a craft fair 👍😊

[@Winterbourne_Workshop]

Nice little spoons. Those little bits are the money when it comes to craft fairs

[@William_Kenny]

They are for sure thanks for watching mate 👍

[@Buttermilk3696]

What a great idea! Thanks!!

[@William_Kenny]

Appreciated thanks for watching 😊👍

[@J.A.Smith2397]

Thanks for the idea

[@William_Kenny]

Your very welcome, appreciate you watching,
Kind regards From Will 👍

[@drgruber57]

Great idea. two for one. If I tackle this sometime, I will want to make gauges that are calibrated to exact measurements.
Now to save up for some spigot jaws. Wishing you a blessed 2025!

[@William_Kenny]

Thanks very much. I appreciate you taking the time to watch,
And wishing you a blessed 2025 also,
Kind regards From Will 👍

[@jayp4083]

Thank you!!

[@William_Kenny]

Thank you, appreciate you watching,
Kind regards From Will 👍😀

[@wouldchuckfishingchannel8681]

Great instructional video. I just wish you had shown the bandsaw work. Do you have a jig to split the sphere in half?

[@William_Kenny]

Thanks very much for watching, I just cut it freehand down the middle, no jigs, any little saw blade marks get sanded away easily,
Kind regards From Will 👍

[@patrickmoran2489]

I enjoy your videos, thanks

[@William_Kenny]

Thank you kindly Patrick appreciate you watching and commenting,
Kind regards From Will 👍

[@alanmonk84]

Beautiful work sir!!!

[@William_Kenny]

Thanks very much appreciate you watching mate,
Kind regards From Will 👍

[@ianthemonkeyhangerturner]

thanks for sharing Willian

[@William_Kenny]

You're very welcome ian thanks for watching mate 👍

[@bradouellette6558]

Love the idea of the sanding disc and the little table for the tool rest , I’ll be making that tomorrow 👌

[@William_Kenny]

Thank you, it's very simple to make and has so many uses,
Kind regards From Will 👍

[@donaldquinn3610]

Well done sir

[@William_Kenny]

Thank you kindly appreciate you popping in for a look,
Kind regards From Will 👍

[@pjbaddict]

Great video William

[@William_Kenny]

Cheers buddy thanks for watching and the sub it's much appreciated 😊👍

[@DavidBird-uu8km]

Very nice. Great information.

[@William_Kenny]

Thanks very much David 👍

[@greenhavencreat7178]

Nice work, William.

[@William_Kenny]

Cheers Brian 👍

[@reebertJunkman]

GReat video thanks

[@William_Kenny]

Thank you kindly, glad you liked it,
Kind regards From Will 👍

[@SuzieSwissWoodturner]

They're lovely!

[@William_Kenny]

Thank you suzie 👍😀

[@nigelharvey210]

very nice perfect for all the bits we don't want to throw away

[@William_Kenny]

Even the little bits have a purpose thanks for watching 👍😊

[@clarkgarber5495]

Great scoops. Would have liked to have seen the bandsaw set up.

[@William_Kenny]

Thank you very much appreciate you watching, I basically just cut them down the middle free hand on the bandsaw, no jig used, now I did mess up one or two at the start 🤣
Cheers From Will 👍

[@alfredmollitor671]

Inspirational!

[@William_Kenny]

Thank you kindly appreciate you taking the time to watch 👍😊

[@rogdotcom1]

Brilliant !

[@William_Kenny]

Thank you very much,
Will👍🙂

[@josephinelarosa635]

Nicely done 😊

[@William_Kenny]

Thanks very much appreciate you watching,
Kind regards From Will 👍

[@thomasquinn405]

I don't think there is anything put to waste there beautiful projects William

[@William_Kenny]

Thanks Thomas appreciate you watching,
Kind regards From Will 😊👍

[@thomasquinn405]

@@William_Kenny I wish I had the time to stop by your set up looks great I will defiantly be stopping by next trip I hope you had a enjoyable easter be good William talk to you soon and your projects are truly beautiful and you do a great job with your editing your multi-talented best to the family

[@William_Kenny]

thank you kindly Thomas looking forward to it, say hi to all the family 👍

[@ronwright6870]

You are one clever dude.

[@William_Kenny]

😀👍cheers 👍

[@garryevans3594]

defiantly going to attempt this little project.

[@William_Kenny]

Give it a go a fun little project to turn, cheers from will 👍

[@tamaraadams7072]

Lovely, thank you

[@William_Kenny]

Cheers thanks for watching 😊👍

[@rickwalker5940]

great idea!

[@William_Kenny]

Cheers rick appreciate you watching mate 👍

[@pcc4233]

Wow so cool!

[@William_Kenny]

Aaah thanks very much appreciated 👍😊

[@kathymoser9750]

YES!!! This idea has been in my head for a while now. Thank you for sharing. Have you made a jig to help hold it at the band saw?

[@William_Kenny]

Thanks for watching Kathy, I've a fine tooth blade on the bandsaw and I just freehand it 👍😊

[@joepapalia-xs1ds]

Well done

[@William_Kenny]

Cheers joe appreciate you watching,
Will👍😊

[@glynweir7906]

Great spoons. How wet or dry is the wood before you turn it?

[@William_Kenny]

Thanks very much Glyn the piece of cherry was cut over a year ago so pretty dry,
Kind regards From Will 👍

[@samangeloturns]

William, very nice video on Turning a scoop. I’m also a UA-camr at Wyomingwoodturner. Just curious I noticed you have a switcher for your cameras. Would you mind telling me what you’re using for the switcher and also what kind of cameras?
Thanks I appreciate your help Sam

[@William_Kenny]

Hi sam, Thanks for popping in. It's great to have you. I've been watching your channel for a few years now. The device I use is a streamdeck that controls my cameras, which are logitec brios all controlled by OBS. I hope this helps you out, if a more detailed explanation is needed just message me on messenger and I'd be happy to help,
Kind regards From Will 👍
www.elgato.com/us/en/p/stream-deck-mk2-black
obsproject.com/
www.logitech.com/en-eu/products/webcams/brio-4k-hdr-webcam.html?srsltid=AfmBOoozoXhZZyNFv98Y_rF_StytcfW4lm2kih5YqCmeseeCnMh3g1-6

[@HWCism]

Very clever. How do you prevent the wood from drying out and splitting?

[@William_Kenny]

Thanks very much. Those little logs had been sitting in my log store for a couple of years, just air drying naturally, 👍😊