Front Wheel Speed Sensor Replacement [Jeep JK]
Вставка
- Опубліковано 5 вер 2024
- How to replace a front wheel speed sensor on a Jeep JK. Symptoms of bad wheel speed sensors are: ABS/ESP dash lights illuminated, no cruise control, throwing codes U1417 or U1418.
Link to sensor replacement: www.morris4x4c...
Follow me on social media!
Instagram:
www.instagram....
Instagram (Jeep page):
www.instagram....
Twitter:
/ cmeacham_1
Be a Patron of my channel!
/ chrismeacham
For Business Inquires Contact:
meacham039@gmail.com
Software/Equipment I use:
Edited On: Adobe Premiere Pro CC
Cameras: iPhone 6S, Sony a5000 (16mm-50mm), SJCAM M10 Wifi, Canon Rebel T6i (18-35mm)
Great video, very helpful. Some words of advice. Take your time working the old speed sensor out. I twisted the top portion too hard and it sheared off the lower portion in the hole. I had to drill some screws into the plastic and it finally came out in a few pieces. Accessing the wiring harness connection area is very challenging, especially if you have large hands.
Andrew Huber this is a great point. I turned the camera off and spent a while getting my hands in there and pulling it out. Gonna pin this comment!
Nicely done! I've reviewed quite a few videos trying to figure out how to replace my Jeep's wheel speed sensor, and yours was the best by far. Thank you!
Your video was perfect in every way. Thank you so much dude!! People like you save us all lots of money by skipping the mechanic and doing some projects at home.
I know this an old video but the stealership charged me 800 bucks to put my wheel hub/speed sensor on...I'm too blew..great video and I'm trying to learn about every component on my 2007 Jeep Wrangler!!!!
The hardest part of the whole job is unclipping the stupid red harness connector. Was really hoping to see that in action. Have no idea how to do it. I'm about to cut the wire and splice it out of frustration.
I use a flathead and just pry it. You can also use a pair of needle nose pliers
First and last video I needed to watch thank you very much. Your video was super high quality. Perfect distance. And sound was perfect. Hope you do more Jeep JK vids. You know what your doing. Not sore why anyone would give a thumbs down but I guess those people are out there. Lol
daleintampa thanks! I'm glad this video was the one-stop-shop for you. Take care
Brother, you made it easy for me. Mechanics would explain to you the science. I just want to get it done.
Great video! I’ve purchased the front and rear wheel sensors and will replace when I do the complete brake service as preventive maintenance.
👍
Thanks for taking the time to film this! Very high quality! I’m going to attempt this myself now.
Great video to the point with out a lot of bla bla bla
Chris you are a godsend!
i made the unwise choice of driving over a styrene foam cooler and I think I snagged the right front sensor...in the morning ill get cracking!
many thanks, man!
Love your video , I am a TJ guy for years and got my fist 2009 JK now
RAD! Thanks man - my jeep has been throwing that ABS traction light for more than a year - I'm fixing this next weekend!
Lol I thought my truck was a lemon...same thing throwing these codes randomly. What a pain in the ass!
very well done, easy to follow. Been watching mine as goes off/on however living on a 2 mile mountain road that can be rough or icy in the winter. A few times it goes off on dry pavement so will get a scan. Thanks again.
Well done. Changed mine out tonight, and your video was super helpful
Great help thank you ur the first most helpful vedeo of any kind I ever watch young man thanks blessed
Javier Requena i appreciate that very much! Thanks!
I'm glad I watched this first! I might go get a torque wrench before I start now, I didn't realize it would be so involved for the $35 parts haha. Stupid lights have been on for 30,000 miles though, I'm looking forward to having cruise control back! Thanks for the video, nice quality, sound, etc. Well done!
Man if I had a jeep you would literally be my biggest help😂
Matthew RK I’ll get a BMW if you get a Jeep ;)
you should probably replace that front axle seal too. that oil leaking was probably what did in the sensor
Nice trick with the extension tapping it in
Thanks for the video... just replaced mine this morning using the info from this video.
Great video. My ESP Bas sensor has been on for a while. Wish you were local because i'll gladly hire you to be my go to guy.
1npd haha, to all my friends, i am their mechanic! it’s good business, and fun! i hope you get it all sorted out soon, have a good day bro!
Awesome man, im glad I found this vid. Just had my front left speed sensor go out.
The local Walmart will have a nice pellet gun that will take care of all those birds in the back ground 😅. Good video. Helped me change mine!
Clint mcfarland I’m glad it helped! Have a blessed day
Great video man. I’m going to have to tackle this Tomorrow for the front right sensor. This video helped tremendously with info for what I’m up against.
Good job on the battery isolator. My rotors were pretty tough to get off when I did mine. Had to get a bfh and "persuade" them. Also my Jeep wouldnt give me a code as to which sensor was bad so I just did them all.
I had the same problem but I took my Jeep to a local Firestone dealership. They off a curtesy code scan. Unlike Autozone or Advanced Auto, Firestone's scanner will pull history codes. Drivers front was defective. Bought 1 sensor and swapped it out and problem went away.
Good vid - but its possible that you must fix your left Axle sealing? Looks wet at the C..
Very handy video in case the Jeep starts throwing those codes! Hopefully I don't have to re-watch this video any time soon :)
MakeYourOwnAdventure hopefully! haha. Thanks for watching
Awesome video. Very detailed, but at the right level. Helped explain complexity of some of repair. Thanks!
Brian Gregory no problem, I’m glad this video helped!!
Thanks Chris. Doing my speed sensor today.
Noosanfamily Noosa goodluck! Glad this video helped!
Nice video demonstrating how to fix a poorly designed vehicle we call the Jeep. Planned Obsolescence is why I went to Toyota.
My driver's side wheel speed sensor on my 2014 JKU just started randomly lighting up and throwing a code. Guess I better change it. thanks for the video.
I hope you took that retaining washer you had on the hub and threw that thing away and NEVER put them back on, especially if you are using wheel spacers. The spacers need to sit flush against your hubs.. Those things are just junk they put on at the factory. Most people just toss them as soon as they buy new wheels or tires. Also a good idea to use a torque wrench to bolt them (wheels and spacers) on to the correct torque spec.
I have had to replace two wheel sensors on my '16 Wean with less than 37,000 miles on it. I have never replaced a speed sensor in any other vehicle, ever. I have made a complaint to the NTSB and the process is quick to do so. If enough of us complain about the speed sensor problem, Jeep will be forced to recall them and fix the problem.
super helpful and high quality video. Thanks !
Nice job young man ! Thank you for the video. 😁
Should be simple to tackle then this weekend. appreciate the vid..
Goodluck! You got this.
Good job! Great verbal instruction and video.
I don't know if I need a new sensor or not. I drive the interstate daily and occasionally (1-2 times a month), my traction control light comes on. Nothing changes as far as drivability, but I don't know what would cause this to happen periodically? It is level ground, constant speed (cruise control is on).
Pete Minter i have a video called “how to diagnose the abs light”, that might be helpful. But these stock sensors are notorious for going out, most likely the wheel speed sensors
@@developmentdivision122 Thanks Chris. If it keeps happening I may replace. How do I know which sensor might be bad?
@@appstate1996 that is also outlined in the video I talked about in the previous comment.
Awesome video young man. Please continue making
I live in upstate NY we have a lot of corossion in those wheels from hard snowy winters. doesnt look anything like your wheels when taken apart. OMG well i will have to have it diagnosed and hopefully its back or front sensors and not all 4. looks like back ones are easier front look a little more involved. of course i am worried, just hope the automotive place doesnt take me for a ride when i get there and tell me i need all of them. too bad some of these places like to do that to women.
Great video bud! Very thorough explaing part names and socket sizes. Made me laugh when you said l, "once you crack it loose it should just be hand tight." Lol but very great vid, keep Jeepin
Omg this is a life saver??
Great video on the hi speed sensor. Thanks
Great video
This is very helpful. However, I'm not good at car stuff at all, and this looks like a lot. I also don't want to pay for someone to do it for me. My question is...is it bad to have the sensor broken? What happens if I just leave those two ABS and traction lights on? Will my brakes malfunction? Thanks so much for this great detailed video.
Raychel Ortiz not a big issue. You just won’t have functioning ABS, traction control, or cruise control. It’s not a safety issue or anything. I drove around with the lights on for a while until I fixed it.
I just replaced mine using this video - thanks, but now I still can't get the 3 warning lights off. They now turn off for about 5 seconds after startup and then come back on (before the 3 lights were just on constantly). Any idea? Much appreciated-
I really enjoyed this vedio, this will help me a lot. Thanks
I think this is my problem. One question: how do you know which side it’s on? Is it only “front” and “back”? Or is there a “front driver side” and a “front passenger side”? Thanks!
Raychel Ortiz if you go to autozone, and get them to read the OBD2 reader, it’ll give you a code most likely. From there it’ll tell you exactly which sensor is bad. But there is one sensor per wheel. I figured out by feel, and sort of a lucky guess. But getting the code (should be like U104b or something) and googling it, will help.
Good repair!
Thanks for the detailed lesson. I have the problem of the ABS sensor dash lights illuminating. On my 2015 Jeep Wrangler Rubicon Unlimited. But, when I plug in the FIXD code tool, it shows a U0024 code. Could you please tell me what that code means ? Thank you. Sincerely, Anthony
My traction control light is on a jeep is running sluggish. Reading that it could be these sensors, or camshaft sensor OR and module OR pcm. Lol. Gonna start with these and the camshaft sensor.
Nice explained, could you please also to add parts item numbers,where you bought them and prices ?
Thank you
My Jeep has abs/ebs/4wd/traction control it all came on after my front left wheel bearing started to hum. I’m about to replace the wheel speed sensor. But after I replace the sensor if I wait on the bearing will it get all the lights to shut off?
Joseph French if you replace the sensor, but the bearing is causing the issue, the lights won’t turn off. But the bad wheel bearing won’t ruin a new sensor.. i say just do the job at the same time, you have to take out the sensor to put in a new wheel bearing anyways.. just my .02!
Thanks for the video! How did you know which one was the bad one?
Josh Allwine whenever I would start driving, I could feel the Jeep applying ABS to the drivers side front. Its a really weird feeling. But its super obvious which wheel speed sensor i failing.
Nice dude, I haven't had to do this before. Good to know for when I do. Thanks! =)
Vinny Gullotta no problem! i hope everything is well with you. Have an awesome day
Very helpfull thank you
My Jeep stopped setting the speed at which I'm going, I don't have any ABS lights, do you think that could be that?
ur video describes exactly what is happening to my 2013...checked both sensors and neither had any physical damage so i changed one and drove around the block...mine is triggered by turning left...but when i changed the one, it still showed both warning lights and system still didn't work properly...is there a reset for the warning lights/system or could it b something else causing this system fault???
Neil Crocker you have to reset the computer, just disconnect the negative terminal of the battery for a couple minutes and then reconnect it. There is a sensor on each wheel, so you might’ve replaced the wrong one.
so if there is no physical damage on either how do u know which one it is...also the abs system is still malfunctioning ...ur saying if i changed the right one the computer reset should fix the system warning and work properly?@@developmentdivision122
Thanks for the video!!
Good video. How did you know you needed a new one. What was the jeeps signs and symptoms?
MUDTRAIL abs, esp light would turn on and lock up the drivers side wheel.
@@developmentdivision122 that is exactly what is happening to me right now with my 17 JK
Very good video, very helpful. Thx
This was a great video!
Question? Would Channing the rear speed sensor be the same? Do you have a video changing out the rear speed sensor? I need to change mine, but refuse to pay 900.00 if its an easy fix.
I don’t have a video over it, i didn’t change my rear ones. But it is pretty much the same, however i don’t think you need to take off the rotor, i think you can access it from behind. Google it, there are write ups on how to do it on the forums.
how many speed sensors does the jeep wrangler have? (4 door jeep) And how do we know which one is bad?
One per wheel, have it tested or replace all 4
Great video too BTW!
"Old Guy Knowledge " for you... tie a kite string to the sensor harness when you pull it out. Then pull it, retie the sensor or harness to the string to feed it through the same path...
First step... look up online what a kite is.
Rodrigo Gonzalez lol i used to fly kites back in the day
Very Helpful
How did you ever get those spacers to lay flat with the factory rotor washers on? Your supposed to remove them .The factory only puts them on so the rotors don`t fall off on the line other than that they have no purpose
The harness plug is such a pain! I've replaced mine tons of times
The Bearded Jeeper eventually im just gonna take out the ABS and ESP system
I haven’t done this yet but I did the rear ones n the plugs broke. So if it’s the same plug you can use the similar plugs from a chargers light plug with an easier locking tab. Both mine in rear have been “upgraded”
nice video. Thanks.
Thank you.
I have a 2012 Jeep Liberty, idk if it’s a whole lot different. But how do you figure out which abs speed sensor is the bad sensor?
How do you reset the light on the Dash panel I changed the (2) front sensor and it still remains on.
I unplugged the Battery Neg terminal trying to reset. I try to obtain the Code but not able to do so, to determine if I need to replace the rear sensor as well. Your help is well appreciated. WHEN I start the vehicle in the morning the light is off as soon I put it in gear and the vehicle moves it comes on.
Carmen Gonzalez just replace the rear sensors. cheap fix. also good preventative maintenance. then from there if you still have problems, then it’s a bigger issue. i would just replace the rear if the lift remains after replacing the front ones.
I just did my front, broke it when doing ball joints. Anyway I didn't even reset the computer, lights went off after about 2 foot forward driving. I had previously had similar issues as you, intermittent lights and the jeep would actually hit the brakes while taking off. Turned out the twisted pair of wires to my left rear sensor was over twisted from the factory where the harness splits to each side above the rear axle. I unwound about an inch, stripped, soldered and used marine grade heat shrink tube to seal it. No problems now for well over a year. '09 Unlimited Rubi. Hope this helps.
very cool I know its my speed sensor but how do I figure out which one the abs and traction light came on when I hit a pot hole and when I had the rear right I could tell and I told the guy at the shop and he said your right but I looked and it might be the left rear I see something like a cord hanging other 3 tires don't see it so how do you tell? I would love to do it myself but I would need someone to help just in case if I were to do right now still under warranty so I better get it done by the shop untl its over lol like your videos
MsLeelee94 alright there’s another video i have named “how to diagnose the ABS light” or something like that. And i show how to figure it out. But if it’s under warranty, have them replace them all. They all usually go bad after a couple of years anyways.
@@developmentdivision122 thank you!
Great video, I'll take all for of mine soon. On a side note, anyone have any issues with their jk not blowing hot air when using heater? Ours only blows luke warm air and takes forever to hear up the cabin.
I had this problem. When I flushed my radiator and went to refill it I noticed air bubbles blowing out of the radiator cap. I didnt recap it until all the air bubbles were out and now it blows scorching hot.
On the speed sensor,what kind of grease do you use,I’ll be doing this exact repair.
I know you said you had a bad sensor for a year, how did you get your Jeep to ignore it? Mine senses the bad sensor and then makes the ABS activate when I take off so it makes a bad grinding noise.
RDZmichael at the time i pulled the fuses for ABS and ESP. (I have a video on how to do that) that way it shuts off abs and you have no problems. You can still brake normally just know that you won’t have active abs.
The "Rotor Holder" Should have been removed before installation of the wheel spacer to properly seat. Also that front axle seal needs some attention
Nice video, thank you
Be nice if someone could give the p0501 code for which wheel that is ? Left or right ?
"Once you crack it loose, it should just be hand-tight.""
I laughed at that too lol, but i wont give the fella a gard time about it bc it was a great video.
So bassically , you had the ESP /ABS light On and it went away after doing the install ? Was that all it took ?
Carlitos Norris yes
Nice job man. I really enjoy seeing whenever you have new videos... keep it up!
I noticed you're using a wooden block on top of your jack... is that stable? I have 34's, and of course my jack can't reach the axles. I've been holding out for a long reach jack. That's definitely limited the amount of work I can do on mine though, so I've been looking for a hack that could work temporarily.
paryl thanks! And it is stable for me, it’s an old trick my dad taught me. Just make sure the wood is centered up and you’re using a good jack location, and it adds some reach to your jack. I’ve been holding out on a new jack too, I’ve been wanting a long reach, with a long handle too, the jack i have is cheap and not so great.
Great job man! Thanks!
I ordered the piece just need to install it once it gets here but is it safe to drive like this?
Yes safe to drive. Your abs will not work properly so don’t depend on it when driving.
I see some "how-to's" for replacement of the sensor and they talk about having a torque wrench and setting the torque for those bolts that hold the caliper/brake assembly on. I see you didn't mention anything about it. Do you see the value in going that detailed or just making sure that it's damn tight and move on? ;)
Blue medium strength threadlocker and tighten to manufacture torque spec. 100ft/lbs for front. 77ft/lbs for rear
Did you paint those calibers yourself? What paint / primer did you use?
I was running young and wild, no primer. But the paint is VHT SP731 Caliper Paint (I picked it up from oreileys)
@@developmentdivision122 seem to be holding up well?
Damn I’ll wait til I need to put on brakes to replace mine
How do you tell which speed sensor is bad? If you have a bad one.
How do you like those wheel spacers, any particular reason to run them. Just curious cause I was thinking of trying them.
JK408CJ been about a year or so with them on, no problems at all. Good quality. Good price too.
My abs, brake and traction control came on today out of nowhere, i'm reading it's usually due to a failed speed sensor, I plan to check it out asap, After the light came I drove the vehicle for an addition hour seemed to be fine, except lights staying on, what are your thoughts? also wondering if it's safe to drive until I have it checked
Safe to drive
I have a 2015 Jeep Wrangler sport unlimited I’m driving and all of a sudden my abs light and ebrake light flash on for a split second,my radio loses volume and my speedometer goes to 10mph then goes right back to normal. Turn power off radio it starts playing normal. Any ideas?
Is this the same for a Jeep liberty?
Is it safe to drive with the light on I have to get to work and back?
Hi, how do you know if its front or rear wrong to be replaced?
How did you know which one it was
Use the “live data” option on a scan tool. You can access the ABS data, where it will list the FR, FL, RR, RL speed sensors and their respective data outputs. The problem sensors will show an “error” or an imposible value. Roll the car forwards and back while monitoring the wheel sensor data.
Can i grease wheel bearing through that ABS sensor hole..??
The Money Filters you can try, but that’s not it’s intended purpose and probably won’t work well.
@@developmentdivision122 real issue is there is no way to grease wheel bearing in my 2012 jeep wrangler.. when i pulled out my abs sensor in the back wheels , it looked bone dry inside ..also its making some noise in the morning when i start my trip.. audiable only in slow speeds🤦
The Money Filters you might just need to replace it. One of my wheel bearings dried out too, i ended up just replacing it. I have a video on that too if you are curious or need a how to.
Did this turn off your ESP/BAS light in your dashboard? I am having the same issue. How did you know it was your driver side sensor?
erwin cuevas yes, and i have video going over how to diagnose the light. But whenever my lights would turn on, my drivers side wheel would lock up. So that’s how i knew.
Chris Meacham okay i went over to your other video. I did turn the key three times. However I got the code P-2110. Which says electric throttle control. I did my research but I guess that code comes up with the check engine light. The only light I have that comes up, is the ESP/BAS on my dash board.
Nice vid
vahid tekeste thanks v!!
I replaced my front wheel sensor and solved the problem but the lights came on again after 4 days . Any suggestions?
It could be any of the 3 other wheel speed sensors on your jeep.
all my lights are on and im pretty sure this is the problem...... can you or anyone out there tell how to determine which sensor is out? will a code tell me? LF,LR,RL etc thanks
I have a video on my channel “how to diagnose abs light” and i go over how to figure out which wheel it is