How to use the Festool Domino Joiner to make furniture
Вставка
- Опубліковано 22 лип 2024
- Screws and nails many times lead to loose and wobbly furniture. In this video, I will show you how beneficial the Festool Domino Joiner is in making furniture.
Watch the full video here:
• Using the Festool Domi...
Some of the tools and products I used in this video.
Davey Struggle is an Amazon Associate and earns from qualifying purchases.
Festool Domino Joiner
amzn.to/3nmOgsl
Festool Vacuum
amzn.to/3aAVQgv
Titebond Wood Glue
amzn.to/3UzeFT8
Festool Dominos 12mm
amzn.to/3DIUmgl
Let’s not forget the centuries of hand cut joinery too
It’s not “THE” answer it is AN answer. There are lots of ways to build stuff without fasteners
Great point, I agree.
In a situation like that where you can't use a clamp u can use a ratchet strap
Mounting the camera on something you will hammer on is brilliant!
That's very unique.
Turn it over and put weighs on it
to much glue is not a good idea, when clamping you can creat a hydraulic pressure that can actually split the wood, ask me how I know heh heh
I wonder if you could put another flat bit of wood on top then set a few weights on it to hold down all the legs for the glue up.
ugh it's just a festool advert.
Gravity will not work with wood glue my friend, there’s a minimum psi of clamping required for wood glue, please look up bridge clamping; this would be a solution or epoxy 👍🏻
If you turn the table you could clamp it or at least put something heavy on the table to act like a clamp.
Absurd amount of glue here. And you should wait 30-60 mins for the glue to partially dry. That way you can use a dull chisel or knife to scrap it off very cleanly
😎
You could of put something small & heavy on top of the leg
Why are you trying to sell this product? Sponsored?
Not sponsored, purchased with my own hard earned money. Just passionate about a well engineered piece of equipment.
@@DaveyStruggle - Ahhh... so you're trying to get sponsorship like the better channels, huh?
@@johncoops6897 what a jerk
Let’s not forget that costs $2k and the average Joe ain’t forking that out for some wood joinery, this is for carpenters and rich men
The Domino is not 2k, about half in fact.
1330 plus accessories now, excuse me. They were 2k when they came out from festool
Kind of a weak design.
You are putting a lot of faith on those dominoes. Dominoes and glue are typically strong, but ...
Anytime someone's elbows touches that table....
Well, live and learn.
I’m curious myself to see how these stand up to a real world test. Might add support braces if I start seeing any failure.
@@DaveyStruggle
Either minimalistic corner braces between the table and legs or a more obtrusive boxed frame connecting all the legs.
Me... I'd go for the corner braces.
1/3 the table leg distance from the table down, perpendicular to the 2x6 leg should work.
Normally people just do mortise and tennon... spending $1200 to do something wrong isn't the answer
Hahaha, you really know nothing about joinery. Keep moving.
@@andyyrew yes... I don't know anything about joinery. Except what did they do before using a domino jointer? Mortise and tennon? Floating tennons. All cut by hand? I bet you finish everything you make with a random orbital sander too...
Go learn how to use hand tools then come talk to me.
I don’t understand your point here Spizz, first of all you can’t even spell tenon right. Second of all a floating tenon and regular tenon offer the same strength and a domino will cut a tighter fitting mortise than you would my friend
@@timrenaud8673 a mortise and tenon is around 30% stronger than a floating tenon, it has a larger glue area and surface area in the joint. The dominos a handy tool, I own the 500 and 700. The domino massively simplifies joinery but overall produce a more basic and weaker product.
Buy India
I call them biscuits
They aren't biscuits tho
Such a bad design
Extremely weak design.
Sorry but that’s not how wood glue (pva) works it did nothing scientifically proven you might as well have used zero glue it’s literally like 3000 psi that wood glue needs to set correctly look up wood by wright great glue test like please don’t show people how to do poor work you could have done so many things to do it right like literally super glue would have been better but use polyurethane glue you know gorilla glue or epoxy is what I would’ve used like hide glue even best furniture glue in the world as it’s removable come on do better please don’t make videos about how to incorrectly make wood furniture it’s dangerous but it does help me make thousands of dollars a month going behind all of you o customers homes fixing your broken furniture you sold them on Facebook then upgrading them to real fine furniture throughout there house so maybe it’s a win for me but I do not like people getting over on others or misinformation period. Yes I will stand by this yes I can prove it with papers & studies done by professionals even mit did a paper on pva and wood glue in like 2013…..
“Only 15 hundred dollars, and saves me from having to use a chisel for 6 seconds!”
Only 6 seconds? Hmm
japanese unique carpentary