Keep in mind that there is a math involved here! If you weigh over 200 lbs you need to factor wheel softness and hardness as the wheel will deform faster at any speed if too soft and then add to it the very large diameter. You need a much larger hard core and less outer wheel rubber.
My friend once used the wheels from a fuzion scooter, its like a scooter skateboard combined, they were 130mmx30mm were black with a cool looking grey core, i wanna check yhese iut though
will your wheel gears you sell on your site work on my evolve skateboard 36tooth kegel metal ones.i just ordered them now thinking not sure if they go on evolves.thanks
Yeah so larger wheels will always slightly impact torque if you don't change the gearing to compensate. We have such large motors on this board (6374) that it really doesn't make any difference.
Hi there this is one of our personal builds. We have a page on our website with a parts list with links to where you can buy the parts and a video on how to build it ( electric-skateboard-parts.myshopify.com/pages/the-evolve-clone ). And if you want us to build it or need any help you can email us at propulsionboards@gmail.com
I've read from some people previous experiences that these are better. Better contact patch and longevity vs the cloudfoams 120mm. Ride feel is too small and negligible between the two.
My DIY board has 5055 270KV motors on a dual drive and i am actually going to set up the dual drive on caliber trucks. Does anyone know what motor mount I should use with the clamp on the caliber trucks to support the 5055 motors? Thanks
When you said that you lost 3 to 4 miles is that bc u didn't change the gearing too?. I know that they r heavier and softer, but the gearing also has a impact in range.
Yeah we kept the gearing the same. These wheels are truly REALLY BIG so the added weight made an immense difference. It was probably closer to 2-3 miles lost
@@king1ny Evolve sells them listed as "caguamas" for their board but they are actually kegels evolveskateboardsusa.com/products/32t-drive-gear-abec-11-flywheels-and-evolve-gt-wheels?variant=15398451281969 feel free to hit up their CS for questions they are 5-stars imo
Haven't seen 120mm urethanes yet got to be honest? I know there's cloud wheel 120mm but they ain't thane's are they,And there's those 115mm rubber wheels you can get.Thinking about I have seen urethane sleeves that go over hubs that are 130mm I think but they won't feel like proper full Urethane wheels so it's different.
@@mectricaltitan777 probably. But the softness would slow you down faster than 80a wheels. Also you would need big/a lot of risers to prevent wheelbite. So your board would be high af.
I've been using them for about 60 miles.. usually always going full speed @38mph and I've broken two wheels so far. They are not good at maintaining higher speeds. The "core" got loose and the polyurethane spins freely around it. Squeals, burns battery, and you have no brakes when this happens.
JUICY!! Those things look like Jolly Ranchers. =) Next up: Shark Wheels mod. ;)
These are awesome on the direct drive onsra black carve board. I got 26 miles range on these.
I got 30
My set came in just before christmas. Nothing to use them on yet, but they sure are pretty!
I agree, they are nice wheels. I managed to get the 72A (!) wheels.
Can you use these with regular long boarding trucks, Board & some bones bearings? Thanks.
Yes you can!
Keep in mind that there is a math involved here! If you weigh over 200 lbs you need to factor wheel softness and hardness as the wheel will deform faster at any speed if too soft and then add to it the very large diameter. You need a much larger hard core and less outer wheel rubber.
Another advantage is lifting up the belts and pulleys for a bit more ground clearance.
Less chance of them getting hit by rogue rocks.
Very true
Damn. I just got new orangatang wheels 80a and 77a...
If only i saw this sooner
They look really cool.
These are awesome it looks like you guys are doing great boards!!
It would be interesting to compare these wheels with the new 120 in your latest video.
How is the wear on these wheels. As they are so soft.. how long do they last, approximately?
Looks really awesome
Been using them since we uploaded the video, still holding up great, super soft. Literally our favorite wheels
what about for non-electric skateboard do the shockpad fit smae
It is nuts to see a wheel that is 4.3 inches across 😂 I was thinking of putting these on a penny board 😂
How are they on a non e board
Hell yeah the ultimate LDP AND Esk8 ride on😘😘😘
Can you add the LEDlights pleeeeeese ?????
My friend once used the wheels from a fuzion scooter, its like a scooter skateboard combined, they were 130mmx30mm were black with a cool looking grey core, i wanna check yhese iut though
How long did it take to purchase it?
I was wondering where the bearings go, but then I realized how big these wheels really are
Yes, they are huge!
slick revelution 120mm
will your wheel gears you sell on your site work on my evolve skateboard 36tooth kegel metal ones.i just ordered them now thinking not sure if they go on evolves.thanks
These will fit on a metroboard dual stealth if I get kegel pulleys right? Thinking about getting the press fit ones
I believe so
Are they usable on a regular skateboard?
I suppose so
did you notice a drop in torque and range? i have an exway flex and im not sure how bad it will affect the board
Yeah so larger wheels will always slightly impact torque if you don't change the gearing to compensate. We have such large motors on this board (6374) that it really doesn't make any difference.
So one year on which wheels do you prefer: the Torque Boards 110mm, the Winds Wheels, Airless Rubber wheels or something else?
TB 110 are still my favorite, but wind wheels are a close second
Hi, do these fit on a regular longboard? Do you think it will be too hard to push?
I'm sure they would, but it would be quite hard to push
Easy to push just put some on!
Hey DIY, I have a question. If these wheels work on regular longboards, do these wheels accept standard 22mm outer diameter bearings?
Hi there, I was trying to buy these wheels for my Boosted Plus. What kind of Wheel Pulleys do they need for installation?
Any Kegel pulley that will fit the Boosted. I think that pulleys already on the boosted should work
Hi there, can you please tell me the exact make and model of that board please? Also rough cost? Thank you 👍
Hi there this is one of our personal builds. We have a page on our website with a parts list with links to where you can buy the parts and a video on how to build it ( electric-skateboard-parts.myshopify.com/pages/the-evolve-clone ). And if you want us to build it or need any help you can email us at propulsionboards@gmail.com
Damn super jealous lol.. My wheel's are going bad and looking for some between 100/110mm
These are great!
So these work on normal longboards right, because it doesn’t look like bearings fit in there
Yes they do work on normal longboards, the bearings fit in just like any other wheel
DIY esk8 Builders never mind the wheels are way too expensive
@mike h not 130$ that’s overpriced as fuck, I was expecting 80-90$
hi buddy where do i get the pulleys for those wheels
32t for evolve gtr? thanks👍
The BOA/ KEGEL ones on their website
DIY esk8 Builders thank you👍😎
Go 38t
Do these fit on exway flex or ownboard w2?
P.s. sorry im new to e skating. Lol
Not sure at all. Should fit an KEGEL adapter
Hi, can you compare these to the cloudwheels / slick revolution foamies? That would be interesting!
Yeah we will do this once we can get our hands on some!
Thank you, I am excited :)
I've read from some people previous experiences that these are better. Better contact patch and longevity vs the cloudfoams 120mm. Ride feel is too small and negligible between the two.
Hi, how do these compare to all terrain wheels?
AT tires are much more comfortable, but higher off of the ground. AT will also work off-road.
You should review the boundmotor skateboard
What wheels would you get for long range ?
Usually, the smaller the wheel the better the range. So, for the most range use a smaller wheel
My DIY board has 5055 270KV motors on a dual drive and i am actually going to set up the dual drive on caliber trucks. Does anyone know what motor mount I should use with the clamp on the caliber trucks to support the 5055 motors? Thanks
boardnamics.com
What brand is the helmet you are wearing ?
It is a Ruroc
Wow!👍🛹
When you said that you lost 3 to 4 miles is that bc u didn't change the gearing too?. I know that they r heavier and softer, but the gearing also has a impact in range.
Yeah we kept the gearing the same. These wheels are truly REALLY BIG so the added weight made an immense difference. It was probably closer to 2-3 miles lost
is it ok to use on a non electric board?
Never tried it but I'm sure they would work
Any cuts or chunking?
Not yet, they are amazing - my favorite wheels
Is it good with big cracks
Yes, these are great for that
So these fit on the 32t Bambo gtr with out needing anything else correct ? Noob question tbh
Yes that is correct! Just make sure that you have the KEGEL pulleys
@@DIYesk8Builders helllll yeah ordered em already
Where do you get the 32 t pulleys for these wheels?thanks
@@king1ny Evolve sells them listed as "caguamas" for their board but they are actually kegels evolveskateboardsusa.com/products/32t-drive-gear-abec-11-flywheels-and-evolve-gt-wheels?variant=15398451281969 feel free to hit up their CS for questions they are 5-stars imo
Logmo Thank you bro is that $29 for each pulley or for a set of 2?thank you
What are you running for esc? What's your range?
FOX Boxes, around 20 miles
@@DIYesk8Builders those sexy fox boxes. Having a great time with them now that my build is running.
Does this work for Lyacon Board
Not sure
Liinnnda 👏🤩😍
How is it comfortable to drive on rough roads?
very smooth
Compared to Cloud wheels 105"s?
Never tried cloud 105's, but I like these better than cloud 120's so I think its a fair assumption to say I would like them better than 105's too
97mm 107mm 110mm 120mm we're too spoilt. We'll have 200mm urethane soon enough 🙄
That would be epic
Haven't seen 120mm urethanes yet got to be honest? I know there's cloud wheel 120mm but they ain't thane's are they,And there's those 115mm rubber wheels you can get.Thinking about I have seen urethane sleeves that go over hubs that are 130mm I think but they won't feel like proper full Urethane wheels so it's different.
Where can one purchase these 110mm wheels?
Wow I want that 😔 !!! I have a longboard but with small wheels ( sorry for my bad english I'm french)
No worries, we are French too! ;)
Might get those, concerned about weaker breaking tho
Braking is still plenty good, no need to worry about it. We are using 32t and its fine so if you are concerned 38t will be more than enough
Will these work on non electric longboards
Yes, just more rolling resistance and heavier
expensive for delivery...i luv them as well
Foamies?
Never tried them... yet
Let's see how they look at dirtied up now.
They are not at all the same color anymore haha
@@DIYesk8Builders anyway you can take a pic and show me? I'm thinking about buying a pair tonight. Are you still happy with them?
Yeah do you want me to email you a picture? Yeah they are amazing! Definitely worth it
can it also maintain higher speed 🙂😉
yes these wheels are great at high speed!
do non-electric long boards can be used by this wheel and other equipment used to set up the deck?
@@mectricaltitan777 probably. But the softness would slow you down faster than 80a wheels. Also you would need big/a lot of risers to prevent wheelbite. So your board would be high af.
I've been using them for about 60 miles.. usually always going full speed @38mph and I've broken two wheels so far. They are not good at maintaining higher speeds. The "core" got loose and the polyurethane spins freely around it. Squeals, burns battery, and you have no brakes when this happens.
Do y'all sell boards yet? Lol.
Yes, electric-skateboard-parts.myshopify.com/products/custom-board