Build the Delorean - Issue 91 - Connecting the Frame to the Chassis
Вставка
- Опубліковано 30 вер 2024
- Subscribe to World of Wayne at bit.ly/307c9rj
You can now support the channel and see behind the scenes videos on my Patreon at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media:
www.linktr.ee/w...
My Amazon Store
If you like anything you see in these videos I have an Amazon store here. Check it out
UK: www.bit.ly/worl...
US: www.bit.ly/worl...
Get Amazon Music at
www.getamazonmu...
Hope you enjoy this build.
#Delorean #BacktotheFuture
I just can't believe that it's been 20 years since the world was losing their freaking minds over Y2K!!! LOL
HAPPY NEW YEAR!!!
What a bastard of an issue this was to do. I had to use different screws to the ones provided for the underside of the car. Spent three hours trying to get the two halves together with the provided screws, but they just weren't long enough.
Changed to my own and in about a minute had them all in securely. I think whichever distribution company dishes these out in Australasia possibly added the wrong screws for connecting the shell to the base.
Didn’t enjoy this issue . Struggled to get the body of the car to fit . Wire seem to short . Ended breaking parts it was that much of a struggle
No Seriously can someone tell me which lights are supposed to work at this stage!!!!!
okay all the lights work for me at this stage. The only ones not connected at the moment is front headlights, brakelights. My door lights work and all interior lights. My flux bands do not work however. No idea why. No an issue though as I never planned to use them. I am using EL rope for this.
I"m so nervous about this issue! At first I was glad you found it difficult as well, but then I thought "Oh god, if he thinks it"s difficult, what chance do I have?" Time to find out. Huge thank you Wayne for doing these great videos!
Very poor. No way if the model was quailty you should have had these issues. Poor QA typical when it comes to building eagle moss models. For the price you pay should not run into these issues. Following the model it's a pain in the arse and you saved me money. Not buying this crap. Better off buying one that allready lights up and cheaper at that. I am getting the logic toys floating delorian.
I’m also doing the ecto one build up as well i’m about halfway to where you’re at . Just barely putting the floor in with the carpet kit I got from Mike Lane
Thank God for this video! I'm at this stage right now and it was a pain. Wayne you are the man!
am I the only one who has issues with the cables coming out at the front being mirrored? I have the blue and white cable coming out on the opposite site as displayed and the same with the red and yellow? So basically the position of the cables is mirrored to what I see in the Magazine. Same with the light inside the bonnet. The small gap beside the hinge inside the bonnet to feed through the cable is on the passenger side, not on the driver side
It's to do with the numbering being incorrect in earlier issues. I never went with the numbers and just matched colours.
I can’t understand you because you’re talking too fast
Had real issues with this... Issue the body just won't sit properly on the chassis. I have a gap bit bigger than the one you have.. Also broken the wing mirror.. Rear view mirror.. And one of the front wheels have fallen off.. Nearly threw it at the wall.. This is after 3 hours of trying.. Everything inside the cab is clear so not sure if the problem..... Any help much appreciated... Cheers mat 👍
I was crying by the end of this. Hopefully it will go better asbI am doing it again on the channel now
2:50 "...but if it's shorter than 20 minutes I'll be shocked."
Total video run time: 20 minutes, 50 seconds.
for me the 1/8 scale looks a bit compressed compared to the 1/6 scale from Hot Toys. Might be just the camera angle? awesome model though, love all the light up functions
Don’t paint it there is a panel coming to cover that bottom section
Ahh cool :D
hi Wayne ive come to attach the top and I have wires 20 & 21 not connected to anything. please can you help
Oh wow. Its been an age since I did that. I can't remember. Chloe at Modelmodz is the brains for.this build. She may have an idea.
I ordered the after market power supply which should solve this problem according to Chole. Of course I have the benefit of your videos and have only completed up to issue 1-10. Also ordered and received the carpeting set. Xams tree and Flux is my next order. All shipped to us in U.S.
Did you miss the memo? The batteries get drained even when you've got the lights off on this thing, which is why it's probably better to get Chloe's power mod installed. Also, why didn't you try changing the batteries first??? lol. Happens to the best of us mate. ;)
The quality of this kit is pretty bad. I had to order a new driver side door assembly because the hinges are very fragile. I am currently in issue 91 and the frame appears to be bent. Buyer beware.
Wayne - does the passenger seatbelt fixing sit behind the bulk head? Mine does and I’m sure it’s not right...
It is a little far back innit
hello I've got a big problem I'm on 91 and my main frame will not screw in the screw holes do not match the base problem
It twisted I'm guessing. You are going to need brute strength. This issue bought me to tears
I reckon you won't have to paint the floor black. There will be a panel that goes along that gap like on the real DeLorean.
When the batteries are low. Do you have to replace the batteries or what happens?
Nothing works. Replace them Or risk them leaking
Just finished Issue 91 and it was definitely the most difficult part of the build. The last screw would not go in and I finally had to clamp the model in order to complete the issue. In the end, it turned out well. I appreciate your videos Wayne; they are a great resource.
14.20 ..Says be careful not to break the wing mirror when turning the car over....and goes ahead and breaks the wing mirror.. You hear the crunch 😂😀😂😀😂
lol. Yep. That's just typical ol' me :D
just like the real deloean car nothing ever works on it lol
Wane I know how you’re frustrated with this issue I felt your pain I went through your pain with the same problem getting a hold of it from Eagle Moss was like pulling teeth I know you finished your DeLorean a while back but this is where I’m at right now I finally got the peace in everything‘s working and today I’m finally putting it together for the last time everything‘s working great but the frustration of taking it all apart it was a nightmare but it’s done and it’s cleaned up very good and then finally moving onto the next issues whenever Eagle Moss decides to send it
When I put the top off onto the bottom of the car, the driver's door will not close properly near the steering wheel any Idea Of what's causing it thanks
To be honest I did this build several years ago and don't remember but I'm doing it again now so will have an answer for you soon
Thanks 👍
Wayne I don't think we will see the floor plate,when the cars complete. We will have silver rods running down each side of the car, conecting the time bands.
I think there are lower running boards like the 2 small pieces in the rear that go under the door sills.
It was watching these videos showing your frustration that persuaded me to get the Blitzway Ecto 1 instead of EM! I have a short temper with inanimate objects.. I could sense the impending frustration..
Absolutely amazing! in mexico we are in issue #13 and the problems nearly beginning! greetings! excellent video as always!
Yeah so this whole episode tells me one simple thing. DO NOT REST the the car on it's sides while flipping over back and forth. Or you will be gluing the mirrors back on. :D
Just a comment for those watching. Eaglemoss just sent out " MANUAL TRANSMISSION " parts issues #16 and #23 here in the U.S. I should have mine in a few days. Lucky for me I am not doing any assembly on mine yet and thus will be able to change assembly order and replace the errant parts as need be.
Thanks for all you do Wayne! Your build is starting to come together and look good!
hello sir.
no idea if you going to read this as its been a long time you posted this vid.
i'm from the netherlands and i reached issue 91 atm...but, i probably do have the same problem like you...can't find any other info on the net....not one light of my delorean works....😔tried new battery 3 times...so do i also have to take it all apart and see where my flaw is?( sorry for my bad english )
kind regards, sil
In my experience the problem is the cables have been put in the wrong way round. Check ribbon cable is securely in and then switch all polarity on the other parts as they go into the control board. They only work in one direction.
owww ok...i will do that first then! thank you very much sir!
hello again!
i solved my problem!! i found another vid, it was my on/off switch...its reversed.....on=off off=on...man....everything works so far!! thanks for the reply sir!happy days
Wayne, the stock batteries and wiring cannot support the updated flux and Christmas tree. Chloe Powell discusses how to wire it up and has a new power mod for steady power. Bad news thought, it needs to come apart again...
Had an email from Eaglemoss after enquiering about missing issues. Told me issues 5 and 8 are back in stock and would be sent to me and i received only issue 8 this morning. Checked the eaglemoss website and Issue 5 is still out of stock. Good video when I get to the electrics of this i will be checking and testing everything during assembly
You might need the power mod from Chloe Powell
Does anybody ever tried to use adressable led (WS2801/WS2811) and arduino board??? Thanks for your informative videos
Sorry to break this to you mate but the same happened to me & it was shorting out when I screwed it all together because it was too tight. I took screws out, loosened it off a bit & lights were fine again. I just need to try & put screws back in again now but from underneath without turning it upside down. Hope you sort it but I don't think it's the electronics.
My only issue with this was I couldn't get 1 of the screws in, passenger side front screw. The gap is too far. I've got a circle metal piece sticking out sitting on the frame which doesn't allow the frame to get any closer. Does anyone else have this problem?
Great work! It looks almost finished! In Mexico we’re on issue 14, we have a long way to wait 😅
Wow, I really don’t want to start this issue I have it but too scared lol great job Wayne must be downhill from now surely!
Wayne I feel your pain. What a nightmare issue that was!. I'm not looking forward doing this issue at all.
Sorry Wayne 🤪
Me too. Arghhh!!!
Wow im not looking forward to this at all im still waiting for my delivery for this month hoping it comes tomorrow
Well done Wayne you got there!....... :) I am now dreading this issue even more now after watching what you just went through!..... :/ Though as I didn't update my electrics from the original I should be okay with the power of the lights etc! Though my wing mirrors will most definitely come apart again as they are already only glued on! Ha Great work mate. Wish me luck. Your batteries were dead in the end.
Yep. all that work and I should have checked the battery power first lol. I have now disconnected the flux band lights at the top of the vehcle however as I am going down the EL wire route
Hi Wayne, I have just finished this nightmare of a issue. Thank you so much for your videos, they help a lot and have been watching you on this build from the start. Unfortunately my orange lights on the doors don't work or my flux capacitor or xmas tree don't light up :( I also had a issue with drivers seat belt not going in front of the bk panel? The number 2 switch on the panel doesn't work. this build is a pain at times but the worst thing has got to be getting it from eaglemoss lol.
I had that and had to take the whole thing apart looking for issues
Most of this issue went ok for me, I got the wires all connected fine but the main problem I had was joining the top & bottom of the car. I got about half of the screws in, but some of the centre ones wouldn't go in as the car doesn't seem to push together far enough. It's almost as if it could do with longer screws that reach as I had to push it down with some force and even then it just doesn't seem to fit together right. My mirrors are still on and the car looks ok from the outside, but some of the screw holes are just too far apart for the screw to make any contact
Same issue but as luck would have it I had to longer screws from another build so used them. The skirt we get in issue 95 will hide any gaps
hey Wayne, those "HT Leads" are actually High Pressure Fuel Lines :)
Lol. I'm ganna make the thing go bang
Hahaha like a few EM boards have 😂
Hi all, my daughter and I finished part 91 just yesterday. was a bit of a beast, but all went well. Couple of points: check belts and wires are ALL clear of the joins. we used some masking tape to hold everything out of the way while we joined the two halves. Get a friend to help with this one, it saves a lot of grief. The only problem was also flat batteries. (took a minute to refresh) and then all lights came on except for the boot light. (I can live with that) the other problem was with the wiring at the front of the car. way back in the build we installed the wires on the wrong sides. Damn. the wires which supply the boot light and front time travel lights (the blue LEDs installed this time) are on the wrong sides. After a bit of rerouting, we managed to get them connected, but the wires for the front headlights aren't long enough to make the crossover. so re routed them out under the spare tyre well, and will make up some extensions to make the connection later.The body screws took some squeezing on the upper body and chassis to make the connection, but once started, they pull the two halves together nicely. looks like the holes were already threaded for once). Really enjoing the build and BIG Thanks to Wayne for sharing his build with the interweb!
Yep. That issue was a nightmare for me
Hey Waynes World. I like your channel!
92 we're attaching the rear bumper
I bought the first three issues in the store last year and subscribed for this via their website. They never delivered. Damn shame and bad practice too.
Not good. I ended up getting mine from the newsagents
Hi Wayne cool videos bin watching you from the start . I’m also building the delorean and have just noticed my rear panel from issue 1 the Diecast metal is a completely different colour to all the other panels and has a gloss finish is yours the same
The rear number plate fender does have a gloss. The rear bodywork panels don't, or at least they shouldn't have
hi Wayne, I'm having an absolute nightmare putting the 2 parts together, seems to be catching. Any tips?
Start from Back and tilt to get one side on. Then top and finally lower otherside. That's all I can suggest as I had a nightmare with it too lol
So what ended up being the issue? Em board or switches?
The Switch
@@WorldofWayneUK did you get a replacement from em or did you go with a mod?
@@ptardy1 I modded it myself. TheFlux band lights were not working so I just used EL wire. The other issue I had with no power turned out to be flat batteries lol
@@WorldofWayneUK I'm using the power mod ... the flux bands work , just not the cabin lights and front lights ... this just and awful process tearing it down ... I really felt your pain today
Surely if it dosent work they should replace it or was it your fault lol
Yer. Still I got it working in the end :D
Flat battery syndrome. ;)
I'm afraid in reaching this step.
After the failure of Eaglemoss and having to wait year and a half I've finally got to do this issue for myself ! Big thank you to you as I was able to do everything without a single issue and Lee twice working perfect! Big smile on my face ! Though I got to say I was shaking with nerves and anxiety till it was done !!!!
Again big thank you !!!! You are amazing 👍
Electrics*
Bloody iPad spell correction is so dumb ! 😆😆😆😆😆
I'm so.nervous to be doing it again soon
Yes I did notice you are lucky enough to be doing the build again and the falcon too!! Amazing ! I adored building the falcon ! Such a wonderful build !
@@WorldofWayneUKhi Wayne I am a little confused about something on issue 91 step 23 of build the delorean it shows two wires hanging under the cover of the car at the front and I can't work out how to connect the blue and white wire together. I am a bit stuck.
@@jamestoyn9755 is that the headlight wires
Another great vid can't believe theres still 39 issues to go???!!!!!!!!!!!
I know. It practically looks finished already lol
Feel for you Wayne! Not looking forward to this issue. I have already put the body and interior together temporarily previously and had a power issue with some of the lights which was the EM board, Man did I sweat working out what i did wrong. Works OK now and hopefully will tomorrow when i complete issues 88-91.
Its all working now but wow. what a pain
After 2 hours of completing issues 88-91 everything is working great. Connecting the 2 parts has solved some gapping and the car looks absolutely brilliant. Thanks for your tutorial Wayne always a must watch.
Strip it back and check the 1-6 switch lead that is plugged into the EM board, maybe requires resoldering or just pushing fully in as it can be a tight connection.
Possibly the EM board is faulty. If you have checked the individual leads and test the power output with a test meter, all you can do is order another EM board.
You know...testing the Electronics was exactly what I was thinking; and what you experienced with it not working . . well the star I live under. Question: For those of use installing the Power Mod, what are your thoughts to have that Powered On as the cables are being connected, just to make sure that each wire works? I'm hoping EM provides what each wire is to operate? If not.. just take note what light(s) go on as each one is connected, and kept on until the body is attached just to make sure nothing happened... ??
Can you remember what wire 21 is for ?? Yellow and orange coming from the board . This was the only left over wire I had when I did a test run
Im not sure. Engine light I think
@@WorldofWayneUK Its for the reactor LED
What happened to the sound, great vid, did all your lights work
If it could go wrong in this video, it did lol :D Yep all the lights work but I have deliberately disconnected the top and front lights as I am going down the EL wire route for those.
Having eventually got my latest issues, everything appears to have gone fine, but what lights am I expected to have? I have flux and SID (Chloes mods), all dashboard time controls etc blue leds on top and front, door leds and roof lights in car....I think that's it until the front and back lights are attached? when does the bonnet light come on?
I know this is too late to mention as so many have already completed their build; but just in case: In terms of the rearview door mirror: I plan on using a small pill box cube and tape it over the mirror to protect it when tossing/turning the car.
Unbelievable mate that the board doesn’t work. luckily I went with Arduino but good luck
It worked fine in the end :D
@@WorldofWayneUK hello, how is the quality of this delorean electronic wise? Im thinking about to buy it. saw complete package from 1-49 for 100 euro. Does the circuits and electronics work flawlessly? or does people tend to have problems? thank you
You are a patient man Wayne. Glad it all worked and it was only flat batteries! Think those mirrors should go on last.
Yep. Silly the amount of times we have it on its side or upside down
@@WorldofWayneUK So silly and awkward! My wing mirrors have come off so much since I fitted them.
In Mexico we are in issue 74, and I need to know, can We Try the electrics now or We need to wait until this issue?
You should be able to try the electrics as soon as you receive the control board.
I'm in issue 91 an tried the electrics...it doesn't work, just break lights and door lights
What's going on
Are we getting wind screen wipers? Surely we should have had them by now?
That's a good question
They come in a much later pack.
looking nice
great show can u tell me when the new roof lights arrive do we have to take the body off
You will do
@@WorldofWayneUK If you are talking about the yellow LEDs which should be blue? Rather than unbuild the whole thing, with risks of disturbing the wiring, I bought an extra issue of the blue LEDs (for the rear bumper) and simply unsoldered the yellows and soldered in the blues. Also take a photo of the yellow LEDs before unsoldering, the longer leg on the LED needs to connect to the same wire. LEDs are polar, like all diodes. solder it the wrong way around and it wont light up. Took 15 minutes tops, without having to open it all up again. OH, don't forget to gently clamp the wires do they don't fall back into the body, or you WILL have to open the whole damn thing up again!
cheers
How do you,turn on the lights?
Press button 1 inside the car on the control panel
Hey Wayne Chris here got told that them to cars don't no if they coming out or not now
Yo whats up any news on lotus bond eaglemoss
No nothing yet
World of Wayne thank u brother hope ur good
With the delorean you need to use high quality batteries not cheap batteries and the deloreans electricals will always work well..from Andrew living in Australia
Better still, get the power mod from www.modelmodz.com and eliminate the batteries altogether.
What happens to your Hand?!?!
lol. Yes I grazed it against a wall.
World of Wayne Gute Besserung! Get well!
Not first. Rats.
Almost lol
Excellent video Wayne and I’m dreading this issue (although it would be nice if Eaglemoss could be bothered to send it to me). My lights went off a few months back but then came back in too. I’ll be gutted if they go back off once it’s connected
First
fours hours for latest 4 issues and it Mine together ok until i switched it on and the replacement Leds for the roof failed so have had to strip it down again and going to source some replacements
Not good. I just cut off the old led and replaced with my own rather then use their replacement
World of Wayne sure ive got some leds or ill go through ebay over waiting six months through eaglemoss so i'm gonna have another go when ive had time to recover ..Still umming and ahhing about using blue el wire for the flux bands
@@davidfenn522 Yep. I was too but now I have done a trial with it I won't be using the LED,s I can I'd the power pack for the EL rope in the trunk
did you wire them with the correct polarity?