Build the Delorean - Issue 125 - Cables and Fitting the Reactor
Вставка
- Опубліковано 22 тра 2019
- Subscribe to World of Wayne at bit.ly/307c9rj
You can now support the channel and see behind the scenes videos on my Patreon at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media:
www.linktr.ee/worldofwayne
My Amazon Store
If you like anything you see in these videos I have an Amazon store here. Check it out
UK: www.bit.ly/worldofwayne
US: www.bit.ly/worldofwayneus
Get Amazon Music at
www.getamazonmusic.com/worldof...
Hope you enjoy this build.
#Delorean #BacktotheFuture - Навчання та стиль
Thank you Wayne, for all of your DeLorean Build videos. They have helped me immensely and I enjoyed the way you put your tutorials together. Unfortunately, as you may be aware, Eaglemoss seems to have gone the way of the Dodo. I am up to issue 94, but the chances of being able to complete it are bleak. That said, Thank You again for your tutorials, they have saved me lots of time! Cheers!
Those pipes were an absolute nightmare to get in Wayne especially that last one. Typical of this build. Great work. Take care!
Great job Wayne.. I would keep the plutonium chamber if it was mine.. that’s the original 😊👍🏻
5 Laps To Go Wayne. Checkered Flag Is Right Around The Corner
Really looking the part now Wayne - those oil leaks don't look so bad now you've attached the pipes :)
The plutonium chamber is the original car! They just don't sell the stuff at every corner drugstore!!!
lol. Good quote.....although I bet they will in another 50 or so years :D
Hi Wayne just picked my issue 125 up and I got a leaflet in it saying about the extension of the issues that are another 29 issues but I'm stopping at 130 👍👍👍👍👍😁😁😁
it really builds fast when you watch 125 episodes in just over 2 weeks LOL
Great video again.
Another great show Wayne looking fantastic 🥇🥇🥇
It's been a long emotional rollercoaster
Congratulations Wayne you made it 🎆🎇✨🎉🎊🏆
To fit mr fusion you just need to take the 2 flexible pipes out from the back of the reactor & it will then just slot into place. Great video as always.
Those two flexible pipes are supposed to be shorter with Mr Fusion installed and plugged into the base plate. Eaglemoss ballsed up on that one and didn't give us an option to have it either way.
Hello Wayne. I have ordered Issues 120-125 from the Eaglemoss-Shop! Wayne, I had a Flyer in Issue 125, saying that the new Issues will have a Set of Wheels, Train Rails and a LIGHT UP Hood Box!! To thank You for Your loyalty, we will give You the first Issue of this extension for FREE, with Issue 130!
I just send You the Scan of the Flyer. Also, if someone wants the Display Case for the Delorean, Eaglemoss is having a 25% Discount on it now + free shipping!
IT WAS A GOOD VIDEO.I'M HOPING THAT I WILL BE ABLE TO DO THE TERMINATOR.AND EVEN DO FUTURE ITEMS,THAT WOULD INTEREST ME.TO LATE FOR THE DELOREAN. WELL I'LL STILL BE WATCHING YOUR SIGHT, EVEN IF I CAN'T GET THE ITEMS TO BUILD ALONG WHILE WATCHING YOUR VIDEOS.IT'S JUST NEAT TO SEE THE ITEM BEING SLOWLY BUILT IN STAGES.LIKE THE BISMARCK AND THE DELOREAN. WELL THANKS AGAIN. BRUCE. HOPE YOU CAN GET A TERMINATOR FOR ME.THANKS.
Looking amazing! Just waiting on a replacement part with the last bundle of issues to complete issue 123. Can’t believe it’s nearly done. Where did that time go!
These part build seem a feat when you first start them but it is amazing how quick the time goes.
Verry good Job ,Verry good Video
You’d think it would’ve had paint for a no rub off transfer cause those stickers will come off!
Hi Wayne, can I ask does your reactor plate tilt side to side slightly if you press on it? Mine looks straight and cannot see anything being trapped but does do that. Just wondered! Thanks
Yep. Every so slightly
Hi Wayne.
Can I ask?, where did you hide the battery pack for the el wires? It was sat on you engine cover on previous videos, but obviously not now?..
I bought a mini inverter and stashed it under the wheel arch
@@WorldofWayneUK cheers. Is that a model mod or just an ebay purchase?
I must say, the coloured stickers are a bit of a disappointment. I'll make sure I wait until I've got them in place before I fit any of the pipes they're stuck to though.... If I ever get that far. Still waiting on issues 88 to 93 which were paid for at the end of March. Apparently they've been reordered for me so I'll probably get two lots in the space of a few days. Also still waiting on issues 94 to 99 which are due to arrive next week if they've managed to send them out. :/
Did you find the the reactor plate wobbles and doesn't sit flush with the back. On mine it wobbles and I can see some of my orange el wire as it goes through the hole in the back.
Mine wobbles anyways as the EL rope goes down the side of the engine bay compartment lid. It isn't really that noticeable though
I love the ark reactor you have in the background by the car in its case. I was just wondering where you got it. If you don’t mind.
I think it was from Wish. One of my viewers @beanieshobbies made it for me
Hi Wayne I've been thinking and honestly think you should buy some flame stickers for on the ground behind your back tyres they sell decal stickers on ebay but you'll need clear background to look good on the mirror you have it sat on also get them mirror image of each other
That's a good idea. Mike Lane. Are you reading this?
You may need to contact him I don't think he will see your reply and read everything I would like your email please Wayne I found a nice one to use you could just print it out onto sticky film or sellotape on sellotape so you can remove it after it's printed
@@mealex303 will do
Hey what mic do you use?
I use a Blue Yeti for my live streams and just a cheap lapel mic for my main vids
THERE IS A TRAIN VERSION ? I GUESS I'M LATE FOR THAT TOO .LOL BRUCE THANKS
Yep. Issues 131 to 159 will be turning it into the Back to the Future III version
Oh hoot just my luck LOL
Im leaving mine with rhe plutonium chamber on top
Likewise Chris. Far less hassle to do so too.
😉👍👍👍
Will you still be continuing with the train version?
Yep :D
@@WorldofWayneUK I think it will be a waste to be honest with you. The wheel's I bet will be hell to change.
💥🚗
How many issue are there, Wayne?
It was 130 but they have just extended it by 29 issues
Any high IQ minds or scientist watching this just had their brain melted trying to work out what a bent angle is? Hehe when all the most logical answers they came up with just hurt with cranial failure following. while you just continued without a problem. LoL 😂 👌
working on for too long you mean Wayne, lol Eaglemoss and not proof reading
i'm not going to bother with the coloured stickers
Wayne, please PM me on Facebook (bill will green)
I'm not on Facebook. I only have a business page on there.
Ah. Ok. If you want you can email me. I have some roofliners for the delorean with your name on. Speak to Chloe, she'll be able to give you more info.
Billygreen1973@gmail.com.
Thanks