Great recone job I love watching you work So much that reconed a car 15 to a 8 ohm coil for home use After watching some of your rebuilds I was successful and it plays fantastic Thank you for the great videos
Pro tip: when rasping the opening in the spider, put a washer loosely between the rasp and the chuck of the drill and keep the washer flush against the spider to help cut away at it evenly.
Awesome content!! Not sure I'd ever take on building a sub... But seems like a fun thing to do, though... Especially knowing the enjoyment you get out of the end result
I recently came acrossed a really good deal on some crossfire xsv4 15s but only have 3 of them and was wanting to do what you did here. Question I have is I wanna make them into 21s. Do you think that the motors would have enough ass for 21s. Will be ran in a 6th order as well. Thanks
I've run into that with those too. Sometimes you have to drill the heads out to get the basket off then put pliers on the shaft and take it out. I hate doing that.
the music at 29: 54 is really cool. it's the traveler of the song I think it's called echoes. just put that on my Spotify playlist. also one thing I notice about your subwoofer builds is that I don't hear any kind of like mechanical noise and I'm not talking about just bad installation but the subs at you build are really clean I mean I don't hear that much Distortion at all even when you're free airing it really cool man good job!
With those skills can you re-work the Rockville K-9 Subs (either revision) and make them durable? A kinda video on what the manufacturer should have done and what you did to correct the issue.
It's simply not worth rebuilding one of those from a cost analysis standpoint. There is one thing I don't do is do other companies R&D work, which is what I'd be doing if I pointed out what's wrong with it in detail and said how to fix it. If they paid me to re-engineer it I would.
looked like that little gap on the surround worked out to be beneficial. turned out perfectly uniform, maybe that could prevent the creasing you see at max excursion on some surrounds?
I reused them so I didn't have to get a bunch of bolts I'd probably never use again. I had shorter and longer and it costs more to buy fewer than more of them. Quite often when they're phillips they're not metric either, so I'd definitely never have a use for them.
you used spacers on this, so before setting up the coil do you add whatever the measurement of the spacer to the top plate measurements for example top plate is 1/2" and spacer 1/2" so now the top of the plate will be 1"?
No loctite or glue over the screws? I just tore down hifonics 400wrms 12. It had its coil broken away and screws loose. Luckly the basket is glued down.
where did you get the coil at what size i need to recone my crossfire 18 its the same model but i neeed the specifics to rebuild mine and im not skilled in finding out all the info to recone mine ould you please help me with the indfo i need for the parts please and maybe where you got them
Same as before. I won't rate something higher than what it was without testing it to ensure it will take it. Anyone who does is blowing smoke up your ass to make a sale.
Man thats fucking dope. Ive always wanted to build my own subs either some bad ass 15s or 18s and i know you told how to find subs to rebuild but I live in Hurst, TX. Have no idea where any sub warehouses are here
Great video. Just have a question regarding the spacing. I know subs have screens in place to ensure debris doesn’t get into the coil area. Should you not have added one?
Do you mean on the basket or on the pole? In the case of the pole that effects cooling, in the case of the basket I'd say a strong number of subs don't have that mesh. Depending on the fluid dynamics of cooling, the mesh could reduce it by up to 50% and even aside from that, it's not a common problem to have something large going there. It doesn't keep dust out, the holes are quite large so it's more than particles coming through. It has to be something bigger than would be in an enclosure.
This might be a stupid question but I only ask as I am rebuilding some subs for my self for first time..what kinda glues and adhesive do you use and or recommend..do you use the same adhesive for the spider landing and for the top or do you use 2 different kinds..I no all builders have there own way of building..again just curious as I am taking any info I can soni don't make a mistake.. Again thank you for any information you can provide..
Why 18's receive the same magnet as a 12" or 15" within the same lineup? More control of the cone area would be needed therefore needing a bigger magnet right? I dont doubt them I simply wonder why. EMF, Sundown, Skar all do this.
A bigger size doesn't mean less control. Control are aspects of electrical (coil and motor interaction) and suspension (spiders and surround compliance). Some might argue that the larger cone has more mass and more mass is harder to control but Sundown 10's for example can have more moving mass than an 18" cone on another brand or series. The simple answer is, there isn't a need for a different motor in most cases. If the motor is barely sufficient for a 10 or 12 then going larger might suck, or if it's ridiculous on an 18" it would be too much for a 10 or 12.
EMF Audio I wish you could study the difference of both the 12" and the 18" running on music and spl. from that motor. Maybeish you could do it? Yes the 18 is the master. Who would not want an 18" sub to run anywhere car or whatnot.
Also see ppl use accelerator on parts that spray cannot penetrate.. Magnetics..not true either...ik Slower a glue drys in with subject to below optimal temperature the stronger the bond.. I know this for a fact. Not a lier
@@bobdodge3171 yeah, it would take 6 days because without accelerator you'd have to wait 24 hours for every joint to dry. Put a bead down, wait 24 hours, put a bead down, wait 24 hours. Accelerator makes it dry enough to keep working, not 100% strength instantly. It takes 8 hrs to bond 100% strength with accelerator. Now you're putting stipulations on it like below optimal temperature, what about humidity? Nearly everyone is building in a controlled environment or at least not trying to build stuff near freezing. I've built subs and put 30,000 watts on them 12 hrs later without failure so I feel pretty confident strength isn't an issue.
I feel like it would have been more economical to just buy brand new subwoofers. Considering you need to change the basket as well as the voice coil and cone. But I guess if that is what the customer is asking for, then by all means they have the right to do as they wish.
i feel so much pain when i see him cut this nice surround with this sharp knife.i feel like he is cutting through my skin and feel the tip of the knife scratching my bones. very painful to watch
So why did it work then? It's a mechanics trick. Making it swell breaks the chemical bond that's happened on the threads. You also don't heat it up then immediately try to remove it because the material could be weakened. You wait till it cools back down.
@@EMFAudio I'm glad it worked......this time. A mechanic would have gotten an Impact Driver to get it out. They are inexpensive and quick. I hope you have Merry Christmas and a happy New Year! The speaker turned out nice, keep up the awesome work.
Great recone job
I love watching you work
So much that reconed a car 15 to a 8 ohm coil for home use
After watching some of your rebuilds I was successful and it plays fantastic
Thank you for the great videos
Pro tip: when rasping the opening in the spider, put a washer loosely between the rasp and the chuck of the drill and keep the washer flush against the spider to help cut away at it evenly.
What does the washer do? Suppose to watch where it is depth wise on the ridges?
@@greglatta1 it gives you a backstop to rest the spider against to help keep the cut even.
Late to the party but my God this turned out SO well
Awesome content!! Not sure I'd ever take on building a sub... But seems like a fun thing to do, though... Especially knowing the enjoyment you get out of the end result
its must feel awful to have to cut a perfectly good subwoofer lol
It made me cringe watching him 🤣
They was 2 was blown already
It felt awful just watching it
Broke my heart
Nice Merry Christmas to everyone at EMF and everyone watching⛄❄⛄❄
good work like always man been wacthing for a while now man
That cone is perfect no over throw man this is awesome 👏 👌
I recently came acrossed a really good deal on some crossfire xsv4 15s but only have 3 of them and was wanting to do what you did here. Question I have is I wanna make them into 21s. Do you think that the motors would have enough ass for 21s. Will be ran in a 6th order as well. Thanks
Love it I once tryied this but had no luck getting my screws out of my stripped XFL screws.
I've run into that with those too. Sometimes you have to drill the heads out to get the basket off then put pliers on the shaft and take it out. I hate doing that.
@@EMFAudio yeah I ended up selling the 15 XFL because I got my 18 subwoofer.
I like the video, but that 70's car chase/porno sound track you sprinkled in the back round was absolutely awesome 👌
Beautiful work and very high quality 👍
great video ...lots of tips an tricks...
the music at 29: 54 is really cool. it's the traveler of the song I think it's called echoes. just put that on my Spotify playlist. also one thing I notice about your subwoofer builds is that I don't hear any kind of like mechanical noise and I'm not talking about just bad installation but the subs at you build are really clean I mean I don't hear that much Distortion at all even when you're free airing it really cool man good job!
@7:00 im over here thinking someone’s outside honking 🥴
With those skills can you re-work the Rockville K-9 Subs (either revision) and make them durable? A kinda video on what the manufacturer should have done and what you did to correct the issue.
he has
It's simply not worth rebuilding one of those from a cost analysis standpoint. There is one thing I don't do is do other companies R&D work, which is what I'd be doing if I pointed out what's wrong with it in detail and said how to fix it. If they paid me to re-engineer it I would.
looked like that little gap on the surround worked out to be beneficial. turned out perfectly uniform, maybe that could prevent the creasing you see at max excursion on some surrounds?
The spiders max out before the surround does, so no issue either way.
I hate using phillips screws too. I replace them with allen heads. I noticed you stuck phillips screws right back in it though.
I reused them so I didn't have to get a bunch of bolts I'd probably never use again. I had shorter and longer and it costs more to buy fewer than more of them. Quite often when they're phillips they're not metric either, so I'd definitely never have a use for them.
Also I would like to do this with my 2 skar vxf 12s, they r in a suburban
I can do it, just gotta ship them to me, or just motors.
Sooo.. u made him a sundown sa18 with a crossfire motor? Lol im kidding good job looked awesome and great work
Nice build video
Great job.
HaHa! Thanku! and merry xmass and a happy new year!
you used spacers on this, so before setting up the coil do you add whatever the measurement of the spacer to the top plate measurements for example top plate is 1/2" and spacer 1/2" so now the top of the plate will be 1"?
The pink stitching on the tinsel leads look a lot like a psi spider pack.
Exactly what I thought as soon as I seen that pink! Lol
Super job nice video.
What glue do you use for the spider to coil joint?
Crazy glue
Excellent work! Very nice sub!
Merry Christmas. Love the video as always .would the surround been pulled down to reach the basket limit the the movement forward slightly ?
What does something like this cost? Labor and parts?
No loctite or glue over the screws? I just tore down hifonics 400wrms 12. It had its coil broken away and screws loose. Luckly the basket is glued down.
If you torque them properly you don't need it. I torque them properly.
where did you get the coil at what size i need to recone my crossfire 18 its the same model but i neeed the specifics to rebuild mine and im not skilled in finding out all the info to recone mine ould you please help me with the indfo i need for the parts please and maybe where you got them
Clean work i miss it what is rated at now
Same as before. I won't rate something higher than what it was without testing it to ensure it will take it. Anyone who does is blowing smoke up your ass to make a sale.
Where do you get all your parts?
Do you sell voice coils,spiders ,cones and or motoers
Hey buddy thanks for the video.
Question. Why use several spider. Why not use one ?
1 spider can only be used in extremely low power applications. Like, under 200 watts.
@@EMFAudio thank you so much for the info. I have a project I'm working on bot I need 6.5 subs can that size be made custom at 200 watts ?
@@hugodiaz163 Any 6.5" sub that will take 200 watts RMS won't play low very well without tooling basically every part of it.
@@EMFAudio thank you sir
Why do you use E 6000 to clue the surround down, instead of the black glue you used on the spiders and former
CA glue can dry out foam, making it brittle and tear free.
Man thats fucking dope. Ive always wanted to build my own subs either some bad ass 15s or 18s and i know you told how to find subs to rebuild but I live in Hurst, TX. Have no idea where any sub warehouses are here
Blown subs to rebuild are going to be a used market thing, from wherever you can find them.
Great video. Just have a question regarding the spacing. I know subs have screens in place to ensure debris doesn’t get into the coil area. Should you not have added one?
Do you mean on the basket or on the pole? In the case of the pole that effects cooling, in the case of the basket I'd say a strong number of subs don't have that mesh. Depending on the fluid dynamics of cooling, the mesh could reduce it by up to 50% and even aside from that, it's not a common problem to have something large going there. It doesn't keep dust out, the holes are quite large so it's more than particles coming through. It has to be something bigger than would be in an enclosure.
Thanks for the prompt reply. You answered my question. I’m glad to have found your channel.
This might be a stupid question but I only ask as I am rebuilding some subs for my self for first time..what kinda glues and adhesive do you use and or recommend..do you use the same adhesive for the spider landing and for the top or do you use 2 different kinds..I no all builders have there own way of building..again just curious as I am taking any info I can soni don't make a mistake..
Again thank you for any information you can provide..
Watch literally any of the sub build videos all the way through and you'll have the answer, in all of them.
@@EMFAudio thank you will do..
Will you share the cost per sub thx.
Can you recone alpine type r 15
its also my first one i want to do
I still have a wolfram 12 laying around...wonder what we could do with that
ua-cam.com/video/RmOrqRcMz7g/v-deo.html
@@EMFAudio thats my sub in that video
Why 18's receive the same magnet as a 12" or 15" within the same lineup? More control of the cone area would be needed therefore needing a bigger magnet right? I dont doubt them I simply wonder why. EMF, Sundown, Skar all do this.
A bigger size doesn't mean less control. Control are aspects of electrical (coil and motor interaction) and suspension (spiders and surround compliance). Some might argue that the larger cone has more mass and more mass is harder to control but Sundown 10's for example can have more moving mass than an 18" cone on another brand or series. The simple answer is, there isn't a need for a different motor in most cases. If the motor is barely sufficient for a 10 or 12 then going larger might suck, or if it's ridiculous on an 18" it would be too much for a 10 or 12.
EMF Audio I wish you could study the difference of both the 12" and the 18" running on music and spl. from that motor. Maybeish you could do it?
Yes the 18 is the master. Who would not want an 18" sub to run anywhere car or whatnot.
All of them were already turned into 18's, but there are a ton of variables between those things in the vehicle alone, aside from sub to sub.
The guy stated the customer wanted bigger ,he got a bigger vehicle. My opinion ,he has more space why not use bigger subs.
I wonder how many ppl r gonna freak out about u slicing up a good sub, cuz they have no clue whats actually going on
Even though I have a clue it hurt me deep down haha. I wouldn't mind having those other spare parts that were ripped off.
I was wondering if your 15 inch rev1 dual 4ohm could handle a kicker zx1500.1 at 2 ohms and what are your warrantees?
Warranty covers using it at a rated spec, outside of that is your own risk.
I know you're making something much better but all I could think when you're cutting that 12 is "NOOO! NO! STOP IT! NO!"
What about the weight of the new cone ??
It weighs more than the 12.
Great Vid! I'd like to contact you about converting a machete Super Sport 15 into an 18! It's a deaf bonce 1300 watt RMS subwoofer.
Shoot me a message from our contact form on our website www.emfcaraudio.com
What size is that motor? It looks pretty close to my u-series
It's a little bigger than a U series I believe, I don't have the exact dimensions.
Yes it moves... but what about t/s parameters it could be useless
No matter the parameters, it has a usage to fit those parameters.
You rebuilt them using philips screw but you hate using them?
I didn't have suitable replacements on hand and ordering more would have delayed it past the promised deadline, so I reused them.
Do you sell parts? I didn't see anything listed on your website.
We've got some stuff listed in the yard sale, which I need to update. A few motors, some baskets, some cones.
Check out Lord of Bass. You name it they probably got it.
Do you build any 8in subs?
We do, our Ghost line is currently only in 8's, actually. www.emfcaraudio.com
Does that sub still take the same power or what
Yes, power handling is a function of the coil, motor, and suspension. It has nothing to do with the cone size.
That's a lot of clamps lol
Ouch it hurts to see you cut out those perfect subs
Late watching..but why use accelerator?? The slower glue dries the stronger the bond..
Not true, and accelerator is used so it doesn't take 6 days to build 1 sub.
@@EMFAudio not true? Slower glue dries stronger the bond.. Fact .
Wouldn't be 6 days regardless
Also see ppl use accelerator on parts that spray cannot penetrate.. Magnetics..not true either...ik
Slower a glue drys in with subject to below optimal temperature the stronger the bond.. I know this for a fact. Not a lier
@@bobdodge3171 yeah, it would take 6 days because without accelerator you'd have to wait 24 hours for every joint to dry. Put a bead down, wait 24 hours, put a bead down, wait 24 hours. Accelerator makes it dry enough to keep working, not 100% strength instantly. It takes 8 hrs to bond 100% strength with accelerator. Now you're putting stipulations on it like below optimal temperature, what about humidity? Nearly everyone is building in a controlled environment or at least not trying to build stuff near freezing. I've built subs and put 30,000 watts on them 12 hrs later without failure so I feel pretty confident strength isn't an issue.
O m God I need you to built me one...
No locktite?
Not necessary, never use it, hundreds and hundreds of subs.
Its just sad to watch you cut it out when its still in working condition
Poor sub! He should just pay for new 18’s. 😞
why poor sub? it was just upgraded, way cheaper...
@@niknovsak3288 Parts and labor add up fast, would be interesting to know the total to compare to new subs.
You couldn't buy used 18's for what it cost to recone them and be brand new in 18's, aside from any quality differences.
Clamps McClamperson called... sorry I got nothing new :(
I feel like it would have been more economical to just buy brand new subwoofers. Considering you need to change the basket as well as the voice coil and cone. But I guess if that is what the customer is asking for, then by all means they have the right to do as they wish.
i feel so much pain when i see him cut this nice surround with this sharp knife.i feel like he is cutting through my skin and feel the tip of the knife scratching my bones. very painful to watch
You couldnt have reused it? I am just saying waste not want not! I am always on a budget myself
When you have to cut parts off, they become not usable.
Motor looks over sized to what the hell is that tiny motor
give this subwoofer to me please
Don't heat the screw.....duh, heat will make it swell.
So why did it work then? It's a mechanics trick. Making it swell breaks the chemical bond that's happened on the threads. You also don't heat it up then immediately try to remove it because the material could be weakened. You wait till it cools back down.
@@EMFAudio I'm glad it worked......this time. A mechanic would have gotten an Impact Driver to get it out. They are inexpensive and quick. I hope you have Merry Christmas and a happy New Year! The speaker turned out nice, keep up the awesome work.
painful to watch