4 Hall sensors electromagnetic ENGINE
Вставка
- Опубліковано 16 сер 2021
- 4-stroke motor with Hall sensors
In short: when the magnet approaches the Hall sensor, it triggers and turns on the transistor that turns on the coil. The magnet is attracted, the rotor rotates, it is about 40-60 degrees of rotation, it moves by inertia after closing the Hall and the transistor. After 90 degrees, everything is repeated with the second coil, then with the third, fourth. Each coil has its own electronic control. And so 4 times at 90 degrees, a full rotation of 360 degrees.
In principle, this motor can be made on reed switches, but reed switches are very sensitive to magnets and would have to be located far from each other.
Single phase circuit - ibb.co/YRHk9BN - Навчання та стиль
In short: when the magnet approaches the Hall sensor, it triggers and turns on the transistor that turns on the coil. The magnet is attracted, the rotor rotates, it is about 40-60 degrees of rotation, it moves by inertia after closing the Hall and the transistor. After 90 degrees, everything is repeated with the second coil, then with the third, fourth. Each coil has its own electronic control. And so 4 times at 90 degrees, a full rotation of 360 degrees.
Transistors IRF4905, polarity P. The second transistor is only needed to turn on the LED.
In principle, this motor can be made on reed switches, but reed switches are very sensitive to magnets and would have to be located far from each other.
Single phase circuit - ibb.co/YRHk9BN
Тоже самое с магнитами при одной полярности отталкиваются и диск вращается ротор ,а статор нужно смещаеть вдоль оси ротора на подшипниках относительно ротора т,е делать возвратно поступательное движение,потери 15 процентов от намогниченности магнитов потери на сдвиг, кпд85 это механика
hello grain , i'm making your project so i need little more info can you plss help me with that ..... plss give me something so i can contact you ... !!
I love Hall sensors and this there the best. I also found a different type of Hall sensor (by accident) that has a 4th leg terminal and does not need a transistor to trigger the coil. This Hall sensor must have a built in transistor and cuts out all the complexity in the circuit. The only down side is that it can only run on 5v max and very thin coil wire or the chip get really hot. So really you only need the sensor and the coil.
You're having so much fun 🙏
the black spray makes this awesome motor -> 007.
Great 4 stroke, Pulse motor engine with Hall sensors 👏👍.
அருமை அருமை ...புதிது புதிதாக சிந்தனை செய்கிறீர்கள்...👌👌👌💐💐💐
Videos like this got me to subscribe long ago. Love this stuff. Hope you continue for a long time. : )
Very cool! Thank you for the upload!
Nice design! Very similar design to engine crank pistons :)
Wonderful engine.
Very good!
beautiful machine. Nice minimum friction axel
Awesome! 👏👏👏
That is cool!!
👍🤓
Add some fuero fluid as a pump action with magnets. Perhaps adding to the torque
awesome video. grain, can we get a schematic please, turns of wire, hall sensor number ect? people need inspiration . thanks.
Motion = Power.. Harnessed Motion = Service..
Wooowww... fantastic...
A W E S O M E !!!
Like have to be ^_^
Thanks for sharing 🙏
Bonjour,peux tu me donné,la référence des 2 diodes sur ton schéma ? Beau travail.
Hello sir!
I like yours all Videos, but i have a question for you guys, maybe you can, how did you make that hall sensor Bot? If you want to explain, please make a video of the complete body.
Kind regards.
your youtube subscriber.
Nice! Is there any way of controlling the speed?
No, in this version it is possible only to change with voltage, but without control. To control any engine, a separate sensor with an RPM controller is needed.
Bonjour,peux tu me donner le model des 2 diodes sur ton schéma ? BEAU TRAVAIL.
Hi
Where's your Map please
The specifications
Coil
Number of turns
Circuit?
Thanks a lot
ibb.co/YRHk9BN
👽👍🏻
nice, simple, using less , can run many practical mini devices
.. it's using a lot of volt's for the size of pulsed coils, why ?
, perhaps an enclosed laminate coil (transformer E style) will reclaim more pulsed magnetic field for less volts in the same space..
better use of unused bemf through a diode direct to the next coil or delaying cap (takes x time to charge & release) !
I made 500 turns in the coils, this is a lot, it was necessary to make 200-300 turns.
electric piston car engine?
Я правильно понял, что мы в любом случае используем электричество, что бы запустить вал ?
А таже для поддержания работы. А вы искали вечный двигатель?
@@grain8314 мне почему то кажется, что комбинируя разными полюсами ( отталкивание и притяжение) можно собрать самовращающийся вал без сторонней подпитки энергией
Поставить дополнительные соленоиды, которые будут попеременно заряжать аккумуляторы, с которых заряд будет вращать вал. ?
Sometimes I think 💭that you have too good ideas, but you are not getting too much views and subscribers....... 😟😔🙁🤔💟
Thank you! It is necessary to change the direction of the topic, I am already thinking about it.
@@grain8314 yes you can do it, but remind you have a Mastermind.....
Time to make electric cars.