Updating My Worn Out S2000 Steering Wheel!

Another DIY project for my car. Updating my worn-out Honda S2000 steering wheel! I bought this one on Amazon and it turned out fairly well, especially considering the cost of the cover. The one thing I like over the others I've seen is once this one is fully stitched it looks factory. The edges tuck into the center covers perfectly. One thing I will say is the included tape is not enough to help secure the material to the wheel and I would recommend some interior fabric cement/adhesive.
Honda S2000 Steering Wheel Cover Link: amzn.to/3b9xpm2
After the install a couple of key takeaways:
1. Using a heat gun will help stretch the material while stitching.
2. Also using a good fabric/leather adhesive will help a lot!.
Follow Me on:
IG @brandomotion
#diy #S2000 #carmods #cars

[@carguy4life219]

Finally an S2000 car project that my wife can do for me!

[@mioszmarkiewicz2]

Did you removed original leather from your steering wheel?

[@fourdoormafia]

I did this on my crv and the trick is to use leather gloves as the thread digs into your fingers.

[@BrandoMotion]

Thanks for the tip, I may use that on my next wheel.

[@alexmeave6653]

The leather on my Base RSX steering wheel is falling apart. Do you remove the original wrap before putting the new wrap?

[@AlexLopez-kp1wf]

I did it on my rsx wheel that im putting in my tsx and u do not need to remove the old leather

[@freshdc]

Need better lighting and position, i couldn't really see how it came out

[@unkleskruge]

That looks excruciatingly long and annoying

[@unkleskruge]

It looks really good

[@BrandoMotion]

Yeah about 4.5hrs of stitching but well worth it in the end.