Tony's Refinishing, I use a pice of Flat copper as the Touch plate, which is connected to one side of the Input, and the tool to to the other side of the Input, the Thickness of the Touchplate is set in its DRO.
please help me, the generated g code ( file extension is .tap) (SPNDL 1200RPM,FR 2500 MMMIN BROCA 0.25 INCH ) (MACHINE) ( VENDOR AUTODESK) ( DESCRIPTION GENERIC 3-AXIS) (T1 D=19. CR=0. TAPER=90DEG - ZMIN=-10. - COUNTERSINK) (T2 D=4.762 CR=0. - ZMIN=-9. - FLAT END MILL) G90 G94 G91.1 G40 G49 G17 G21 G28 G91 Z0. G90 (2D CONTOUR3) M5 T1 M6 i want to know if the M6 in this g code will work as well as the one in the video if i configure the mach 3 properly as shown?
Hi, this is only a Basic Tool changer, If "M6 T1" is used, the Macro should Change Tool to Number 1. It will not Move anywhere, it will not set any Tool Lengths. If you need anything Additional, that can be achieved by Editing the Macro, by you or me, However if I were to do it, I would need to know a great deal more about your system. Hope this helps.
@@alanrobbo6980 Sorry, if I have a tool change programmed it does fine. When I pause it and change the tool manually or pause for any reason, it doesn't start the next move in the right spot upon resuming.
djangodev, This is a Tool-Change Macro, the Only positions needed to know are Where the Tool-Clips are. Your Machining Position is not needed, this is Controlled by the users G-Code.
Thanks Alan. Now I will watch this video and recover my spindal problem
Thanks Alan. Now I will watch this 6 more times. Blunt force education.
Welcome and Thank You all for Subscribing, I hope you like my channel.
are you using a probe to set the z height on the tool then?
Tony's Refinishing, I use a pice of Flat copper as the Touch plate, which is connected to one side of the Input, and the tool to to the other side of the Input, the Thickness of the Touchplate is set in its DRO.
AlanRobbo 69 thanks very much for the reply Alan been looking for a video like this for a while
Tony's Refinishing, If you think it helps you, then Please Spread the Word.
Onde se encontra arquivo Tool-Changing-Basic.zip.txt para test?
why i dont set value z into Gage bock height.thank you,it not accept
Enter the Number, then hit Enter.
@@alanrobbo6980 thank you very much
Good
please help me, the generated g code ( file extension is .tap)
(SPNDL 1200RPM,FR 2500 MMMIN BROCA 0.25 INCH )
(MACHINE)
( VENDOR AUTODESK)
( DESCRIPTION GENERIC 3-AXIS)
(T1 D=19. CR=0. TAPER=90DEG - ZMIN=-10. - COUNTERSINK)
(T2 D=4.762 CR=0. - ZMIN=-9. - FLAT END MILL)
G90 G94 G91.1 G40 G49 G17
G21
G28 G91 Z0.
G90
(2D CONTOUR3)
M5
T1 M6
i want to know if the M6 in this g code will work as well as the one in the video if i configure the mach 3 properly as shown?
Hi, this is only a Basic Tool changer, If "M6 T1" is used, the Macro should Change Tool to Number 1.
It will not Move anywhere, it will not set any Tool Lengths.
If you need anything Additional, that can be achieved by Editing the Macro, by you or me, However if I were to do it, I would need to know a great deal more about your system.
Hope this helps.
Thanks alan...is this how to modified to auto tool change..waiting your next video?
Thanks Alan! My spindle won't accurately align with previous cuts after a tool change, or even just after stopping. How can I configure it properly?
djangodev, After a Tool-Change Why do you want to go back to where you were, surely you’d want to go to where the Next Tool-path begins.
@@alanrobbo6980 Sorry, if I have a tool change programmed it does fine. When I pause it and change the tool manually or pause for any reason, it doesn't start the next move in the right spot upon resuming.
djangodev, after a Tool Change, The next line in the Gcode should tell it where to go next.
djangodev, This is a Tool-Change Macro, the Only positions needed to know are Where the Tool-Clips are.
Your Machining Position is not needed, this is Controlled by the users G-Code.
I could not find the link
Do you recognise this link?
m.facebook.com/groups/1575539446047424/permalink/2522810051320354/
excellently 👍🏻
NEED YOUR HELP
Followed all instructions and the file looks like garble.
Did you remove the .txt from the Filename ?
Hello
can you send me File "Tool-Changing-Basic.zip.txt"
Look in the Comments, underneath this video and Follow the Link.
ben benameur m.facebook.com/groups/1575539446047424/permalink/2522810051320354/
@@alanrobbo6980 yes, but i cant open it
Have you followed the instructions?
@@alanrobbo6980 yes i mean i rename file
скрипт пожалуйчста под видео надо
English Please 🙏