I always use Brenntag over Univar. And they will refer you to someone local if you’re volume isn’t high enough. They’re larger than Univar and much better service & price. 😊
A question I feel never gets discussed is, how many gallon of batch mix do make based off of square footage when using a simple soft wash pump setup? So say I am washing 100sqft vs 1000sqft. I can figure the strength of the mix on quote IQ just fine. But how do I know how many gallons of product it will take? I don't want to overshoot it and waste a ton of product or undershoot it and have to unnecessarily mix more in the middle of the job if I could have mixed it all on the first go around. Would be nice to know if there was a calculator for something like this. Or even a math equation
Hey thanks for the videos and information. Any recommendations on equipment for spraying bleach as I use brass quick connects and it breaks it down very fast
So i have a 26 gallon chem tank with automatic 5.5 psi pumper. Now when i do a roof wash i would normally use around 5% SH as a target. Now when i get to the siding. Do i have to drain the tank completely if i only have one? Because the house siding would only need 2 percent. Or do i not fill up the entire 26 gallon chem tank and then when i move to the next service for the same house i just add more water to dilute it again without draining? Prolly a stupid comment sense answer but still gotta ask haha
Hello @Foreverselfemployed I have a pressure washer what makes a max flow rate of 10L per minute (2.64gal) and the surface cleaner needs minimum flow rate of 11L per minute (2.90gal) what should I do? Note in Australia Thanks
its crazy though every video i watch is someone has spray and spraying that a kid can do to no one shows how they get that bleach to that hose where did you put the bleach is you show the machine 😕
🔥 𝟏-𝐨𝐧-𝟏 𝐓𝐫𝐚𝐢𝐧𝐢𝐧𝐠: fse1.kartra.com/page/1on1
✅ How To Wash Course: bit.ly/HowToWash101
🔥 Full Video: ua-cam.com/video/P-YlI3jXI9E/v-deo.html
🚨 𝐒𝐀𝐕𝐄 𝟓𝟎% on 𝙌𝙪𝙤𝙩𝙚𝙄𝙌 👉 myquoteiq.com
What spray nozzle system is he using to spray the chem? Is it a water driven system?
Nothing beats totally awesome from the dollar store.
So I can just use awesome
@@tristianantwanmann4694make sure you cut it down. It will damage stuff quickly if not used correctly.
I always use Brenntag over Univar. And they will refer you to someone local if you’re volume isn’t high enough. They’re larger than Univar and much better service & price. 😊
A question I feel never gets discussed is, how many gallon of batch mix do make based off of square footage when using a simple soft wash pump setup? So say I am washing 100sqft vs 1000sqft. I can figure the strength of the mix on quote IQ just fine. But how do I know how many gallons of product it will take? I don't want to overshoot it and waste a ton of product or undershoot it and have to unnecessarily mix more in the middle of the job if I could have mixed it all on the first go around. Would be nice to know if there was a calculator for something like this. Or even a math equation
That’s my question too
Hey thanks for the videos and information. Any recommendations on equipment for spraying bleach as I use brass quick connects and it breaks it down very fast
Stainless steel connectors, probably?
Can you put the bleach and water mixture inside of the soap dispenser of the pressure washer? Or will it ruin the pipes/connections?
What kind of sprayer system is he using to spray the chem?? Is it water driven system?
Anybody in California use bleach?
I’m from call
You mean anybody doesn’t?
So i have a 26 gallon chem tank with automatic 5.5 psi pumper. Now when i do a roof wash i would normally use around 5% SH as a target. Now when i get to the siding. Do i have to drain the tank completely if i only have one? Because the house siding would only need 2 percent. Or do i not fill up the entire 26 gallon chem tank and then when i move to the next service for the same house i just add more water to dilute it again without draining? Prolly a stupid comment sense answer but still gotta ask haha
So we’re in copper
I've been seeing horror stories about bleach ruining peoples washers, is there a way to avoid damage or failure to your gear when using bleach?
Just use a spray pump, it may be longer but it’s easy and safe.
Do you have a recommendation for best home owner pressure washer or soft washer to mix bleach with? Just trying to do my house.
Your QuoteIQ link is down.
What spray system is he using to spray the chem?
Hello @Foreverselfemployed
I have a pressure washer what makes a max flow rate of 10L per minute (2.64gal) and the surface cleaner needs minimum flow rate of 11L per minute (2.90gal) what should I do?
Note in Australia
Thanks
Nice video
Thanks for watching
its crazy though every video i watch is someone has spray and spraying that a kid can do to no one shows how they get that bleach to that hose where did you put the bleach is you show the machine 😕
see videos on 'soft wash bleach pump'.
@@Robnord1 thank you sir
I work at a Wastewater plant, we get deliveries of extremely high concentrations.
I bet
hey why did QuoteIQ send 2 of each email
Someone can resume please ?...
Svp les français c'est quoi l'équivalent en France ? Du chlore ? De la javel ? J'y comprend rien :(
Jackson Robert Miller Mark Anderson Anthony