There basically is one, get a Lightning Rods Big Block motor (fits in the stock swingarm easily - good for 10kW) then get the 72V kit from High Voltage Kits, they have a kit specifically tuned for the Lightning Rods motors and it comes with the display, BAC2000/4000/8000 controller and harness to plug and play. Just add your battery.
To address the charging, couldn’t you use a Y-harness to have the controller and charge port connected to the battery at the same time? Might be unsafe if you turn on bike while charging, but should work.
Just take the ends of the charge plug and extend them, then add ring terminals and connect them to the batt terminals on the controller. Def not unsafe. That's how it's wires in the stock controller, connects to the same batt (+) and (-) pinouts on the board.
The stock charger wires into the +/- in parallel. That single discharge port coming out of the battery means its a common port BMS and charging/discharging happens through the same place. The probable reason why charging port runs through controller for shutoff safety. Prevents bike from being ridden while charging.
what little dongle? They all run right off the controller without a step down. Just extended the leads. The stock controller doesnt step the voltage down. Ive tested the output voltage to the lights and and tested the lights straight to the batt.
Please compare the Burromax upgraded controllers to the stock 1600R. They have two upgraded controllers now. The one for the TT1000R outperforms the stock 1600R controller.
this is sick. also its xt60-xt90, no 1's lol. been looking into getting a burro for my wife and definitely want to go fardriver aswell. also you can use a y splitter as a charge port
That’s not true at all about charging your battery you can connect it right to the positive terminal on the controller and then negative and go from there
A plug & play 72v kit would be 🔥🔥🔥
Definitely and some super moto wheels
@@boredism1327 yes 👏🏽
@burn1gotbeats I was just at a local bike shop said they had the size next check I might grab a set
@@boredism1327 🔥🔥😎
There basically is one, get a Lightning Rods Big Block motor (fits in the stock swingarm easily - good for 10kW) then get the 72V kit from High Voltage Kits, they have a kit specifically tuned for the Lightning Rods motors and it comes with the display, BAC2000/4000/8000 controller and harness to plug and play. Just add your battery.
Just ordered the black carbon fiber tt1600r from ya'll last night. So excited. ❤️
Right on! We shipped your bike out today 💪
🔥🔥💯 best upgrade for burromax by far
To address the charging, couldn’t you use a Y-harness to have the controller and charge port connected to the battery at the same time? Might be unsafe if you turn on bike while charging, but should work.
Just take the ends of the charge plug and extend them, then add ring terminals and connect them to the batt terminals on the controller. Def not unsafe. That's how it's wires in the stock controller, connects to the same batt (+) and (-) pinouts on the board.
Just ad a splitter on the discharge cable to have an extra xt90 plug or use a XT60 for charger. That's an easy fix
The stock charger wires into the +/- in parallel. That single discharge port coming out of the battery means its a common port BMS and charging/discharging happens through the same place. The probable reason why charging port runs through controller for shutoff safety. Prevents bike from being ridden while charging.
Is it possible to upgrade just the controller and battery? To mostly increase just the battery life or will it burn the stock motor?
where do i get the throttle that you used when wiring the fardriver
Or a kit that allowed charging still. Can you add in Burromax own controller upgrade to it? I believe it's a 50amp
can i have the link of the throttle and the plug kit that can connect with the throttle? thanks would appreciate it
Im the guy that did the FD 72450 and retained the factory handlebar controls and lights and posted iit up on the FB page
It's all the same. On/off switches, momentary switches, etc. All the controller does is stepdown the voltage for the accessories.
@DescartesRenegade best part is, you can wire in the factory lights without a step down!
@@JonnyDuzzit really? the side lights has that little dongle in series tho. The rear light also works on 52v?
what little dongle? They all run right off the controller without a step down. Just extended the leads. The stock controller doesnt step the voltage down. Ive tested the output voltage to the lights and and tested the lights straight to the batt.
@JonnyDuzzit on both of my side lights, there's a small shrink wrapped PCB in series with them.
Please compare the Burromax upgraded controllers to the stock 1600R. They have two upgraded controllers now. The one for the TT1000R outperforms the stock 1600R controller.
Sounds good, send them to us and we will test them and post a video 💪
5:46 Can you show me how to connect this switch? and what options should be configured in fardriver?
I’m interested in doing the far driver controller set up on my 1600 is the plug n play stuff out yet ??
this is sick. also its xt60-xt90, no 1's lol. been looking into getting a burro for my wife and definitely want to go fardriver aswell. also you can use a y splitter as a charge port
Can you do one with the burromax upgrade kit? Is that possible ?
& my bike hits 35 constantly unless 2 bars are gone
Just thrifted a burrowmax tt350r and im looking where to pick up the battery casing that the tt1600 has but i cant find anything
The battery box is on the burromax website, part number 19086
How did u set up the break light?
I have a tt1000 and I want to upgrade the battery is there any options?
Does the Sotion FW11 motor fit this?
How many pole pairs does the burromax 1600?
That’s not true at all about charging your battery you can connect it right to the positive terminal on the controller and then negative and go from there
Do u sell drop in motors for burromax tt1600
Hello do u sell the 72300 harness??? I will buy
hey i see the you guys have upgraded the half throttle to a full throttle how do you do that
They have a full throttle for 30.00 dollars on the Burromax website.
❤❤
and mabye could you make a little vid on how to do it
Where do you buy full throttle?
On the burromax site
wdym buy “full throttle”