Це відео не доступне.
Перепрошуємо.
Seagull Models Giant Scale Zero, Assembly and Install: EME60 AutoStart, Fuel System, Control, Prop
Вставка
- Опубліковано 19 сер 2024
- In this Section I show you how to Install the EME60 with AutoStart. This build will really carry to any gas engine install. I went with something new in my fuel system build. We set and drill our prop and lock in our control surfaces.
Get yours:
Engine:
gator-rc.com/e...
22x10 Propeller, 3 Blade, WWII, Gas Engine (Falcon)
S53-2210
Zero:
gator-rc.com/s...
Fuel Tubing FluroSilicon:
PLEASE NOTE: The new fuel type project was a failure, (DO NOT USE), back to tygon it is
Paypal Donations always excepted:
paypal.me/bren...
Follow me on:
Facebook Official Page: / officialjustplanecrazy
Facebook Member Page / 2135398913272660
Instagram / _justplanecrazy_
Check out the Merchandise @ teespring.com/...
Sweet! Aftet seeing the instagram post been waiting for the alert of the full video!
Hope you like it
@@JustPlaneCrazy sure do! Gear head and love watching builds and engines!
Nice job as always budski! I'm thinking my Hanger 9 Corsair will be getting one of these engines. That auto start is way too COOL!
Thanks. Can’t wait to get this in the air and see how it does
This was excellent. A 20+ year builder myself, even I learned something. Great content.
Thanks for watching!
EXCELLENT video. After 70years of modeling I learned some new tricks.
Thanks for watching and commenting. 😝😜🤪
I learned so much from watching this. I'm still collecting parts for my Seagull Super Tacano build. Thanks for the great video!
Thanks for watching. Don’t forget to check out the official FB page Instagram and Merch stores. Also share share away
Looking great! Thats a great idea with the heat shrink on the tank. Will have to start doing that.
Number 11 blade is the right thickness in the pinch for sparkplug gap. We all have them in the shop
Great tip
Brendan, good video. You just showed new to gasoline engines the proper setup for installing a trouble free power setup. I might give a heads up to those tanks that are opaque.
It’s easy to install them upside down. And if there round tanks they do like to rotate.
PS, love flying formation with you at Pegasus! Remember next month is PGRC. A few of us will be arriving on Wednesday. NWR ( C/S ) KRAFTY.
Fuel proof the firewall! Exacto blade for the spark plug gap.
Great tips
Thanks for watching 😝😜🤪
The corrosive energy of vaporized fuel is greater than liquid, if you leave the tank completely filled there is less damage done to lines. Even with an absorbant fuel filter on the fill line, to suck up the maximum amount of fuel, fuel and the smell remains it's vapor does the damage. Many clear tanks have a carb line stiffener to prevent line from flexing, Completely agree with clear tanks over opaque. Like the heat shrink, I've used a dab of foam-tac around the cap as well as all connections into receiver, and permanent servo lead connections. Had a friend who put a porous fuel filter on vent line to filtet the air going to tank, hobby has never addressed air debris from the plane, the field and some tank material break down, never seen an carb air filter.
Great video. Love your workshop.
Thanks for the compliment and watching
I just flew my New P-47 with the same engine like yours and it’s fast too. I’m on my way to top gun
Good luck
Great video 👍
Thank you and thanks for watching. Feel free to share share share
Nice job man! Looking great!
Great video.
Thanks for stopping by to check it out
You do not use silicon fuel line with petrol/gas it will almost dissolve it and the silicon will run through the carb and make one big mess.
Yup. Wanted to try something different that said it was fuel safe. It wasn’t. Followed up not to use in the video description
@@JustPlaneCrazy it is fuel safe just not petrol/gas safe.
Most likely were I went wrong in reading the initial description. Either way all corrected and a great flying plane
Use Aspen fuel and your system never gums up.
Rather than doing the vent line loop have you ever used a 1 way value like the ones that come with smoke systems?
No that’s an interesting thought. Have u?
@@JustPlaneCrazy not yet seems like good idea as long as the valve is reliable because if fails in the closed position the motor would die
how did you remove and install a longer fill tube? I've tried it and it's crazy trying to work through the front of the tank with hemostats, etc. Sure would like to know your method.
I use hemostats through the front.
Centre of gravity to be check with full fuel ⛽ or empty tank
Empty
Try to position tank on the CG, so as fuel is consumed it has less affect on the planes balance.
Was that fuel tube worth the money?? :)
It was not. It failed really fast.
@@JustPlaneCrazy oh what a shame, back to tygon?
Yes. Tried and true I guess
Have a filter outside the tank that is easy to frequently check, in addition clean the carb filter too.
With the ceramic in my fuel jug and a ceramic in the tank it’s filtered out in microns. I have never had a restriction in a carb or filter. External filters as you said are awesome an a good choice also
I love your videos, A wealth of information that I wouldn't have that of since I'm in a middle of a Christian Eagle 2 build with a FG-21 Satio gas engine, I'll keep watching and hit that thumbs down twice, 😆, Thanks for the info!!!
Lol. You bet. Thanks for watching
What was the failure of the fuel tubing? I have been using polyurethane tubing for several years now and never have a problem. It doesn't get stiff like tygon and is pretty easy to find. There used to be a vendor at Top Gun every year and I would restock from him. Unfortunately he hasn't been there in years.
Thanks for watching and asking. The tubing all swelled and split. Even the stuff in the gas can. I assume it’s not as fuel and oil safe as they say. This brand anyway.
I have a F.E.M.A kit on my saito 1.80 on a GP super stearman.
I am confused on one thing.
I have a servo that is actuating two switches. One for the starter motor and one for the glow system.
But as the builder is not around anymore. I am of the understanding that the switch isnt good enough or even capable of making the voltage stepped down to make the glow plug, well glow.
So what would i need?
A separate glow system like i can find at any hobby shop?
What about the motor? Is the switch good enough?
Email me pics brendenmccormick@att.net
Great stuff! Can you tell me where to get the screw cap vent line thingy?
Here are a few option for what is still out there
www.gravesrc.com/sullivan-aluminum-nipple-fitting.html
www.homenhobbyshop.com/Air-VentOutlet_p_1163.html
dreamworksrc.com/product/digitech-maglock-vent-system-8mm-tubing/
dreamworksrc.com/product/fuselage-vent-with-cap/
If you know anyone with this type of gas engine .
Hi there
Im jose i have a evolution gas engine 58GX2 cc trying to remove the crankcase from the blade prop how to remove or you
Unfortunately I have no experience with these engines.
Do you know anybody else that might have this type of engine before
@@JRIVERA1124 I do not. Sorry
I have a question for ya? I just bought an EME 35cc with electric start. Can you explain to me how the controller gets hooked up please? I cant find any diagram or anything and this is my first electric start. Im not sure about the 2 XT-90 plugs or what they go to. Thank you I would appreciate any help or advice.
You bet. The xt90 plugs, one has to be a battery in and the other is out to the starter motor. I believe it’s marked as so. If not let me know and I will take a look at mine for you. The smallest plug goes to an open receiver port. You set up that port as an on off configuration.
Hi, great job.
I’m sorry if you mention it, but what size 3 blade prop are you using? Thanks
No prob. In this will be a 22x10 3 blade
what size tank is it? What sizes do you recommend for various engine sizes?
500 ml for 50-70cc bigger go bigger smaller go smaller but 500 for 50 is a perfect middle of the pack for about 8 minutes of flight time
Just got my Seagull Zero. Where did you get the Kamikaze pilot bust?
It was a pilot series from SlimLine. They sold out and are now owned by DA. Check the Da site
What spinner is the red one
Zy Hobby Chinese shipped
@@JustPlaneCrazy that's the 3" correct
@jjames5928 yeah it’s the biggest one they offer I had to do some trimming on it
Hey Brendon, great stuff! Thanks for sharing. How did you get enough clearance between your front cowling and the Autostart gears for your dummy radial??? My dummy radial touches the gears…I’m having difficulty figuring it out and would really like to fly my big Skyraider with the dummy radial…
Thank for your time in advance,
Chuck
Chuck,
Thanks for watching. I did many test fits and trimmed out the dummy around the gear. It’s blended into the dummy engine and hard to see :-)
Where did you get the spinner from? I need to get a 3 blades prop for my Zero. Only thing different is a Saito radial is going in mines.
Zyhobby.com
Thanks!
As you were putting together zero with your EME starter you never did show how you hooked up your starter to your ignition to your relay to your battery or batteries you said that you were going to use that one battery for your ignition and your starter the question is that continuous power to keep your ignition going or does it hook up as to the power comes on only when you flip your starter switch from your receiver.
The starter…… runs from the starter motor to a relay. The power side of the relay is fed by a 3 cell battery. The relay is controlled by an open channel on the receiver.
The ignition is powered through a kill switch from a redundant set of receiver batteries and controlled through an open port in the receiver.
Hope that helps.
@@JustPlaneCrazy Thanks therefore I will be using two switches.. one for my receiver and the other for my smoke sys. My plane is the Lysander. I’m doing lights, starter on a EME60 IBEC smoke.=4 batteries 1starter 2rec 1smoke
Very cool. Best of luck
@@JustPlaneCrazy 🏆
Did that spinner come with the plane?
Nope. Finding the appropriate spinner for this plane in a 3 blade was a challenge
Nice work!! Can you give me the link of the fuel clunk? Thanks
Thanks for watching. Don’t forget to check out the official FB page Instagram page and Merch store. Share share away. Here’s the link.
Poweka Fuel Filter Fit for Poulan... www.amazon.com/dp/B00GCZF872?ref=ppx_pop_mob_ap_share
@@JustPlaneCrazy thanks, just did💪🏼
please the link for the blue fuel tubing
www.mcmaster.com/#9627T14
ok100per100 regards
Do you have a link for the spinner?
Look here www.zyhobby.com/products/45-inch-spinner-2-blade-prop-cone-for-rc-zero-aircraft-model?VariantsId=12483,12480,12481,12482
How did you pick this up? They seem to be out of stock on everything.
Contact GatorRc. Tell them I sent you. Let them know what your looking for and they will try and source it. At the very least let you know when it will be in. Inventory comes in and leaves fast. Gotta catch it at the right time or preorder. Thanks for watching and asking.
Welcome to the balsa game....this aint no foamy homie! LOL
Do you think you will need to reinforce the firewall box structure to the fuselage bulkhead?
Great question but I do not. They use a lot on triangle stuck inside the fuse.
what is the spinner brand?
Zy hobby