RC-1 VS. Eastwood Dual Voltage Ep.1
Вставка
- Опубліковано 5 лис 2022
- www.royalcoatspowdercoating.com
RC-1 Light Attachment - www.royalcoatspowdercoating.c...
RC-1 Powder Coat System - www.royalcoatspowdercoating.c...
RC-1 Fan Tips - www.royalcoatspowdercoating.c...
___________________________________________
AMAZON LINKS:
Caliper Piston Removal Tool: amzn.to/3Ju0l9n
Blast Nozzle: amzn.to/3LAUYXn
50 Amp Oven Control Box
Diy Kit: amzn.to/3QAY6ny
Pre Wired Kit: amzn.to/3CjvvPj
_________________________________________
Eastwood upgrades including hoppers, attachments, etc can now be purchased at www.royalcoatspowdercoating.com
Eastwood Hopper Upgrade Kit: www.royalcoatspowdercoating.c...
Eastwood Attachment Kit: www.royalcoatspowdercoating.c...
___________________________________________
Royal Coats Powder Coating located in Spring, Tx.
281-985-1442 call/text
royalpowdercoats@gmail.com
Want me to powder coat your parts? Reach out and we can make arrangements!
I started this channel to show my process and help others. When I started coating there was limited content accessible for powder coating so feel free to reach out to my email with any questions concerning powder coat or equipment. For more personal 1 on 1 training/advice we can set up a time and date for calls or video calls from 30 minutes to 2 hours. Click this link for more info.
www.royalcoatspowdercoating.c... - Навчання та стиль
Hey well done mate. That would have to be one of the best Eastwood gun comparisons I’ve watched. 👍🇦🇺
Would have been helpful if you mentioned whether the Eastwood was single or dual voltage and what the differences between the two Also, you kept mentioning something better than Eastwood but you did specify what that might be? Lastly, a demonstration of what it takes to bake pieces like the ones you coated. Not everyone has a shop with a bank safe sized oven to cure larger parts in. One other target audience that could get you a handful of views or subscribers that no one else has done is to do powder coating on cast lead bullets... it's all the craze right now... wink, wink. Love how cool you keep during your presentation, enjoy that there was not a bunch of mumbling during the spraying it helps to hear how well the equipment performs. Really like that you are keeping it real and not sugar coating anything, great job! Keep it up.
Awesome video. Thinking about getting Another RC one
I love watching your videos brother you’ve taught me so much I’m actually on my way to pick up a cheap powder Coating oven as I type this message!
I look forward to learning so much more from you
That’s awesome, glad I could help!
Congrats on the new oven!
Coming from a painter! It seems the eastwood has finer atomization! Not sure if its the tip, speed or what but generally this leads to a better finish! Also on the same note the rc is definitely a beast to get jobes done! Which i prefer personally, the rc
The oem hopper does fluidize heavily helping a lot with faraday area penetration and multi coat applications. The other hoppers and cups I offer do spray thinner for customer that prefer a lighter powder cloud. The ultimate option is the fluidizing kit giving you full control over your powder cloud though
Cadillac Grey FTW just finished up some 5L Ford engine parts in that color with the RC1, great gun works amazing!!🤘
Glad you like it!
cool, ive just bought the rc-1 and waiting to get it 😁😁
Looking to order mine soon..thxs
There is only one thing that you missed, and it's a big one, the price difference!
Just did a racing seat with RC-1 and it turned out great! COuldnt be happier.
Glad to hear!
Absolutely loving my RC-1 thus far! Should have some more parts to shoot this week!
I do have another one in the works. It’s a similar system with enough regulators to control a fluidized hopper.
@@royalcoatspowdercoating very nice! Might have to give it a shot as well!
@@Scott46Lee not sure how this comment got posted under yours, it was supposed to be under another comment. Whoops lol
@@royalcoatspowdercoating hahaha all good!
Hey great video ive been watching alot of your stuff and a few others sites on guns because im not new to powder coating but ive always used a buddys. I was looking at eastwood but seems to me that the RC 1 lays so much easier an pulls the powder to the part alot better looks like it takes half the ammount of powder to cover the areas. Seems to me like the eastwood wastes alot of powder, compared to the RC-1.
Hey Nice vidéo !
Do you know if there is a way to disable the powder electrostatic charging ? May be by disconnecting some wires ? Thanks for your help !
I just found out about your product today, it's interesting, do you have any other models planned?
I do have another one in the works. It’s a similar system with enough regulators to control a fluidized hopper.
So I seen in a video your running 40psi with the rc 1 what are you running for psi with the Eastwood
Typically spray the Eastwood around 10-15psi
I like your RC-1 alot better than my Eastwood Dual Voltage gun ! Eastwood shocks me alot from time to time. And Eastwood does not powder up under corners at all.. I heard you have a new Powder Cup for your RC-1, Im going to have to find and check it out. But yea the RC-1 sprays powder so even and smooth..
Great to hear! The new cups are available on the website.
I been wanting to get into powder coating and I think I'm going to purchase the RC gun what size compressor would you recommend ? Thanks bro
Something that puts out 3-4cfm would be more than enough to run this system.
Wow big differnce
Is there a way I can get the powder to quit dumping out of the tip of my RC1 when the gun is pointed down? I noticed it did it to you as well on the ladder rack.
Some of that depends on the powder being sprayed (the weight of it) and the air pressure. The cups that come with the gun fluidize heavily which helps with coverage and faraday areas but also can cause build up in the nozzle.
The hopper kits and the new cups I designed help with that. They are available on the website if you are interested in checking them out.
@Royal Coats Powder Coating thanks for the response! I've only used your gun a few times but it's way better than my old one!
@@jshultz229 glad to hear!
?Can the Rc1 pack be profitable for a hobby side hustle? Doing small parts for friends and family word of mouth. I am kind of familiar and have an idea of most of the start-up costs and equipment including compressor and prep equipment.
Absolutely! I have several customers using the RC-1 system to run small businesses and side hustles. I also have several upgrades to be able to expand the system’s capabilities as you grow. Feel free to send me an email with any questions you might have royalpowdercoats@gmail.com
were these both set to the same kv and psi?
No, the Eastwood is not capable of reaching the 45kv I use for for coats on the RC-1. The air pressure were also different. Each system was set to their optimal settings.
Do you add anything to capture moisture?
I have several filters and a refrigerated air dryer in my air system.
@@royalcoatspowdercoating can you do a video on it?
Very modest review but in all reality the rc series blows the EWDV out of the water all day everyday and it ain't even close. 🤷🏽♂️🤘🏼👍🏼👍🏼
Lol, glad to hear! I appreciate it 🤘🏼
I was gonna enter but you said my eastwood had to have attachments that I bought from you and I didn't buy the attachments, I made them from your videos... but you need to have another rc-1 contest now that I have my rc-1
Yes, that was just to give customers that have made purchases a chance to use their purchase to win some money with it.
Maybe I will try again with an RC-1 contest in the future, but so far I’m 0-2 trying to give away money lol
@@royalcoatspowdercoating well I will keep an eye out because I love my rc-1
My Eastwood takes forever to start charging the powder this is my second one. And I can't get them to do dual coats. I like how easy it is to change colors. Is the rc-1 better in your opinion?
The RC-1 is far better in coating capabilities over the Eastwood in my opinion
@@royalcoatspowdercoating thank you so much for your reply. I will be ordering one soon from you
@@trykeadventures anytime! Feel free to email me if you have any other questions. Royalpowdercoats@gmail.com
The was a 150 Eastwood gun
That was a good job. I like your videos. I just bought the PCS 250 dual voltage Eastwood for starters.
This is a dual voltage in the video 👍🏼
Man, I just found your channel, but can't watch. You say "UH" and "UM" way too much! SMH
UM, sorry? lol
The powder is just falling off at 7:54. I'm using the same gun. And sometimes it just need to be above the item. So the powder is just falling to the painted surface and it becomes oversprayed. Have you figured out how to decide this problem? Thanks for your video.