Arctic Tern Awning Window Installation
Вставка
- Опубліковано 21 лип 2024
- Official Arctic Tern Window Installation Video !
These windows are great DIY projects, or you can have one of our Certified Installers do the work for you!
All Installation Guides, Considerations for Fitment, and Additional Dimensions are available at www.ternoverland.com/resources.
Visit ternoverland.com for more information, or email us at info@ternoverland.com!
0:00 Warning & Considerations for Fitment
0:32 Intro & Guides
0:51 Materials Needed
2:41 Unboxing & What’s Included
4:36 Screws Included - Small vs Large
5:36 Tracing the Template
8:21 Testing the Template
8:52 Window Mock-up & Fitment
9:44 Tracing the Cut Hole
10:38 Cutting the Hole
12:00 Installing the Spacer Frame
14:28 Installing the Window
18:00 Installing the Blind and Screen Assembly
22:50 Important Information - Авто та транспорт
Just installed a 300x700mm Classic pane lost on the west side of Amarillo after forgetting to lock it shut. Marking the key tab location was essential and literally made replacement a snap. Very well designed. Well worth the price.
For what these cost....be cool if it just came with the paper template.
i was thinking the same... bit cheap of them not to just SEND the template......
my thoughts EXACTLY
template is such a pain to make
Great job Ethan!
thank you so much just talked to you guys today with questions about installing the window inside the flare i'm installing
Good video!
Great tutorial!
Great instructional video. Thanks. Just installed my 300mm x 700mm. So happy with the product.
It would have been a bit less brain cycles if you all would have provided the template.
Great Video! Thanks! One suggestion if you ever re-edit this video: include a segment that shows the viewer the 50%-75% compression of the gasket on the outside. Also, I found that going around and tightening all of the screws just to the point of initial compression of the gasket is a good place to start - then go around again in the star pattern tightening each screw the same amount in small increments works well - it took me about three trips around the star to get my gasket compressed equally and to the appropriate degree. I was moving slowly. Gracias again for such an informative video.
Thanks for the suggestion! You can calculate the % of compression with calipers. We did recommend that in the video but it is difficult to show! We also recommend tightening the screws in a cross hatch pattern to make sure that one section of the window isn't tightened too much or too little (avoids over tightening and bottoming out screws) , and gives an even compression all around. Glad the video helped you, let us know if you have any other questions!
What liquid were you applying to wall before placing frame with tape?
WHAT? For the price of their windows they do not supply a template?
What is the outside of your camper made of? Where do you buy that material?
You can see more about this camper at atoverland.com
What is the primer you used with the VHB tape?
Hi Mehran. 3M VHB tape is a quality, readily available primer.
Protects from Backstreet Boys as well
It would be helpful if you write out in the details what the liquid is you used on the screws. Verbal isn't clear. Also answering the other questions in the comments would be helpful.
Hello! Thank you for your feedback. The liquid we used on the screws is written in detail in our installation instructions, which can be found on our website as well as in each package we ship. It is a metal based anti seize. Permatex is a good option.
@@ternoverland thank you!
I just installed my window and forgot about prepping screws. I never used the anti seize on the screws. Should I be unscrewing all the screws to do this? It’s a small 300x500 window in rear barn door of a cargo trailer