After a vacation back few months ago, there was no hot water, and the Code Light flashed 4 times. Called emergency plumber, charged me $99.00 to reset it. I asked him how to reset it, he wuold not tell me and the water heater started working. Since then, I searched online for resetting the water heater, and I found your video. Today, the water heater shut off and the light flashes 4 times again so that I reseted it right away, the water heater came back working. Thank you, and I really want to have a beer with you!!!!
I can't tell you how much I appreciate your help on this. We have 5 children and not having hot water is a really big deal in our house. You just saved me from an expensive plumber/electrician visit and more importantly having to listen to 6 people complain about it. THANK YOU!
I spent two days feeling sorry for myself and finally went to the basement. I am so grateful for your instructions and guidance. It worked brilliantly!
No Hot Water. Light was flashing 4 time indicating High Temperature shutdown. So I followed the steps explained in this video and it worked great. Thank you for this.
After 24 hours of frustration, waiting ten minutes…clicking…and still the four flashes with a pause…I found this video. Worked on the first attempt. I had turned the temp up when it got cooler in the morning so I could take a hotter shower. I assume that’s what shut it off. Now I know to keep it on hot…no higher..and I should be ok. Thanks for the video.
Thank you so much special edition I recently lost my father and I was stuck until I found you video man I thank you so much and I wish you the best in life
An outstanding how-to video. In my case, high winds blew out the pilot light. No control lights were showing at all. Got the pilot lit, (three trys) and saw the light four-flashing. I found your video, and got the sensor reset on the second try. Saved me from replacing the sensor or gas valve. Nice work on the video - many thanks!
2:30am… Trying all the basics to figure out why I could get the pilot lit, but not the burner. Finally smartened up and UA-camd it.. You saved my ass.!!! Thank you!!
11/24/2022: Long story of efforts to get it going before the light started showing the overtemp at which time I saw my control, followed the video instructions and YES, talk about saving the day, LOL, Thank You Very Much for your help!
Worked perfectly, very easy, thank you Hopefully everything stays good, less than 5yrs old, keep seeing Honeywell has issues My furnace thermostat is having problems, also Honeywell
Woohoo I’m so thankful for this reset information it worked I had to buy a theropile and it allowed me to light the pilot but the hot temp shutdown wouldn’t allow me to do the burner. Thank you thank you thank you
THANK YOU THANK YOU THANK YOU SO MUCH AND MAY GOD BLESS YOU FOR POSTING THIS VIDEO. This is exactly what happened to me and I fixed it by seeing this video. The odd thing is a plumber came 3 days ago and wanted to charge me $150 to take it all apart and put it back together with old and other parts. I didn't know what to do until I started looking through UA-cam and I saw this video. Thank you so much again You really helped me out and I appreciate this a lot. I owe you a nice cold beer!.
A beer sounds good. So glad the video helped you. I give all the credit to my plumber friend, and I thought I'd move it forward for others as yourself could benefit.
Hey I have this same water heater on one of my properties, just installed it a couple months ago. It is making far too hot of water even on the 1st hot setting, but the light indicator is flashing normal, any ideas why it would be doing that?
I got a new Whirlpool WH back in 2015 and I too have replaced the entire thermopile assembly several times and the control valve twice, once in 2020 (under warranty) and again a few months back, but now I wonder if it even needed the last one. I'm learning this system's ways. I've never gotten the 4 flashes but I believe I have a twitchy shut off switch. I never keep the temp control over HOT, but I still sometimes get no light with pilot off. Now a quick fix for me is to just press the reset button on cutoff switch, then depress PILOT and ignite. Is working every time. NEVER keep your temp setting on these things above HOT.
1.Leave on off for 10 minutes 2.start your pilot light 3. When it starts switch to very hot for 10s 4.then switch to hot for 10s 5.switch to pilot setting for 10s 6.switch it to hot and leave it there. I just saved you 7 minutes.
Thank you sir. I am a plumber but don't do service for work. You made my day.
I am a woman that was looking a for help with my boiler..so thankful for you and your video. God bless!
After a vacation back few months ago, there was no hot water, and the Code Light flashed 4 times. Called emergency plumber, charged me $99.00 to reset it. I asked him how to reset it, he wuold not tell me and the water heater started working. Since then, I searched online for resetting the water heater, and I found your video. Today, the water heater shut off and the light flashes 4 times again so that I reseted it right away, the water heater came back working. Thank you, and I really want to have a beer with you!!!!
Thanks . Clear and quick video and I have hot water for free. Lol. Enjoy
You just saved me 150 dollars. Thank you brother
Thank you for this thorough explanation! It worked for us and we are thankful.
I can't tell you how much I appreciate your help on this. We have 5 children and not having hot water is a really big deal in our house. You just saved me from an expensive plumber/electrician visit and more importantly having to listen to 6 people complain about it. THANK YOU!
Thank you sir 6/22/24 this method worked w out calling plumber to charge for an assessment
I spent two days feeling sorry for myself and finally went to the basement. I am so grateful for your instructions and guidance. It worked brilliantly!
God bless you sir! Worked for me exactly as you discribed
No Hot Water. Light was flashing 4 time indicating High Temperature shutdown. So I followed the steps explained in this video and it worked great. Thank you for this.
After 24 hours of frustration, waiting ten minutes…clicking…and still the four flashes with a pause…I found this video. Worked on the first attempt. I had turned the temp up when it got cooler in the morning so I could take a hotter shower. I assume that’s what shut it off. Now I know to keep it on hot…no higher..and I should be ok. Thanks for the video.
Thank you so much special edition I recently lost my father and I was stuck until I found you video man I thank you so much and I wish you the best in life
Thank you so much! Found my unit in the exact same fault after a vacation. The reset sequence worked like a charm!
An outstanding how-to video. In my case, high winds blew out the pilot light. No control lights were showing at all. Got the pilot lit, (three trys) and saw the light four-flashing. I found your video, and got the sensor reset on the second try. Saved me from replacing the sensor or gas valve. Nice work on the video - many thanks!
2:30am…
Trying all the basics to figure out why I could get the pilot lit, but not the burner.
Finally smartened up and UA-camd it..
You saved my ass.!!! Thank you!!
11/24/2022: Long story of efforts to get it going before the light started showing the overtemp at which time I saw my control, followed the video instructions and YES, talk about saving the day, LOL, Thank You Very Much for your help!
12/6/22 Same here.
Thank you. It helped me as well. Probably saved $200!!
Worked like a charm!
Really helpful. I followed your instructions and it worked. Saved me a lot of money, by not having to call out someone. Thank you!
IT WORKED, you just saved me $250+ THANK YOU!!!
This was great…..Fires right up after I did the steps
Omg it works! Thank you so much! I calle a pro he said i have to change the whole set that cause me 3k$ tha k you sir!....
This trick worked wonders! Thank you very much!
Thank you! This finally worked for me
This process worked for me just as you explained it. Thank you so very much!!!
Worked perfectly, very easy, thank you
Hopefully everything stays good, less than 5yrs old, keep seeing Honeywell has issues
My furnace thermostat is having problems, also Honeywell
Gracias por estos consejos me ayudaron mucho,dios lo cuide gracias!!!!!
I can't believe this worked! Thanks.
Thank you. You just saved me some money!! Bless you.
Woohoo I’m so thankful for this reset information it worked I had to buy a theropile and it allowed me to light the pilot but the hot temp shutdown wouldn’t allow me to do the burner. Thank you thank you thank you
Thanks you video help me
Thanks so much for documenting your experience!!! Mine did the same thing and your video helped me out. You saved the day, thanks again.
Thanks. Worked 💪.
Holy crap this works! I did too much laundry and thought I borked my heated but it after following the steps it booted right up!!
THANK YOU THANK YOU THANK YOU SO MUCH AND MAY GOD BLESS YOU FOR POSTING THIS VIDEO. This is exactly what happened to me and I fixed it by seeing this video. The odd thing is a plumber came 3 days ago and wanted to charge me $150 to take it all apart and put it back together with old and other parts. I didn't know what to do until I started looking through UA-cam and I saw this video. Thank you so much again You really helped me out and I appreciate this a lot. I owe you a nice cold beer!.
A beer sounds good. So glad the video helped you. I give all the credit to my plumber friend, and I thought I'd move it forward for others as yourself could benefit.
thanks for the video
ThankYou Sir !!! Saved my ass !!! 🙏🏼
Thank you! Saved me an expensive plumber visit
May God Bless you good man!
Thank you!
Thank you sir
Thank you!!! It works!
Can you please show me how to count to 10 one more time? Lol just breakin balls but honestly this video helped me a lot
A thousand thanks!
Omg I love you bro you saved me
It worked!!!!!
CODES 3,4,5 Have to do with water temperature , could be a faulty thermister. Helpful video for folks !
Hey I have this same water heater on one of my properties, just installed it a couple months ago. It is making far too hot of water even on the 1st hot setting, but the light indicator is flashing normal, any ideas why it would be doing that?
Whale oil beef hooked!!!! Thank you sir.
THANK YOU!!!!! Did exactly what you said it would do!! THANK YOU! THANK YOU for posting
I got a new Whirlpool WH back in 2015 and I too have replaced the entire thermopile assembly several times and the control valve twice, once in 2020 (under warranty) and again a few months back, but now I wonder if it even needed the last one. I'm learning this system's ways. I've never gotten the 4 flashes but I believe I have a twitchy shut off switch. I never keep the temp control over HOT, but I still sometimes get no light with pilot off. Now a quick fix for me is to just press the reset button on cutoff switch, then depress PILOT and ignite. Is working every time. NEVER keep your temp setting on these things above HOT.
Thanks! Appreciate the video. Worked for me 😊
Thank you it worked. Amazing.
Thank you for the video!
Thank you for this video it was very helpful to me!
Life saver! Thankyou so much!
Thank you!!! It worked perfectly! 🎉
Thanks thanks
Great fi x
thank you
Thank you so much
This worked!
It's a weird process these engineers make. Dang.
Ours was set on "B" and it actually BURNS bad I just put it on setting "A" I hope that ls a happy medium
Good information but video is way to long
How to complete reset process If your gas control valve is also Honeywell but one of the ones that doesn’t have a pilot setting on the knob?
This trick definitely worked like a charm but after 30min the system stopped working.😢 Do I need to repeat the same steps again ?
Can you leave the dial between hot and low? The hot is far too hot.
Mine flashes 4 flashes… haven’t been able to fix it.
Skip to 4:15
🤟🤟🤟❤
Should keep it at Hot
4:05 is where he says what to do ...smh
Could have been a 90 sec video
Could off have but you tube won't pay them for a video shorter than 3 minutes
Thank you very much, very helpful video. I was able to turn it on. You save money and time. God bless you 🙏
THANKS FOR WASTING OUR TIME!!!
Worked for me and alot of other people and stopped us from calling a vendor, wouldn't say he wasted our time lmao
Great Video, very informative. Worked perfectly for me. Thank you…
1.Leave on off for 10 minutes
2.start your pilot light
3. When it starts switch to very hot for 10s
4.then switch to hot for 10s
5.switch to pilot setting for 10s
6.switch it to hot and leave it there.
I just saved you 7 minutes.