ColourMFA Golf Mk4, GTI, R32 & Bora/Jetta (1J) Detailed Installation Guide. ColorMFA
Вставка
- Опубліковано 14 жов 2024
- A detailed guide showing the end to end installation of ColourMFA into a Golf Mk4 instrument cluster. The donor cluster is a 1/2 FIS cluster so this video mostly applies for both the Bora and R32 MkIV which also usually has the 1/2 red FIS LCD and wiper control buttons.
Regular Mk4 GTI instrument clusters will have a slightly different wiring and you may also need to install the wiper stalk controls if they're already not present in the car.
Wiring diagrams link
colormfa.ru/docs and scroll down to "VW Golf, Bora, Jetta, Passat - Skoda Fabia, Octavia, Superb - Seat Leon ... Installation instructions: _b5_install_v3_2.rar"
Post up any other questions in the comments below and you may contact me on FISClusterCare/
Thank You, now i can buy the cluster 👍
Great job once again bro.
Where can we get the screen and board? Great job!
Hey there. Thanks. You can get them direct form colormfa.ru or I can help if you check out
FIS cluster care page
@@ianpgonzaga thank you. I sent you a message via Instagram
@@ianpgonzaga I don't see anything for sale there. Did they sell out?
@@trey1531 yeah sorry sold out at the moment. Will have stock hoepfully in a few months.
@@ianpgonzagastill no stock
Question:
Can I install colour MFA into the non fis cluster?
Thank you
@@radkohorvath hey. Good question. How many plugs does t have
hello friend, beautiful work how much do you charge to make one like it for my car? and send Brazil
hi probably will be high to ship it. to make the installation is about $900 all up including the kit
You tink I can put on Audi a3 8l 2000 1/2 original fis cluster?
@@mateusguedes9795what is in yours originally?
Well done, can i ask you, where can i find that sticky tape you are using , from where to buy it because it is very thin and i cant find it anywhere. i mean at 53.40 second. Thank you a lot.
Hey Dimitris. We have this double sided tape everywhere in Australian hardware stores 🙂
www.ebay.com.au/itm/184863171035?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=dwoimbqiqmk&sssrc=2349624&ssuid=ZG3E00UETZq&var=&widget_ver=artemis&media=COPY
Does this eBay link help?
@@ianpgonzaga thank you very very much!!!!!!
Hello again,
i just install half din cluster and i wanted to know if the progress is the same if i buy 3d colorMFA.
Also if i install oil level/temp sensor, can i connect the first wire you connect to plus on the colorMFA , to the oil sensor in order to see the prices of oil?
Thank you again. Perfect work.
Could you make it so the dials light up in "OE" Blue LEDs that change all to red when you hit the limiter on a 1.8t?
Nice idea! There's probably a way to do that but i wouldn't have the knowledge.
Good day, where can I buy such an MFA screen?
Try 3dcolormfd in Facebook
How much would it cost for a bora tdi cluster fitted with the screen ? for a tdi and it needs to be immo off and the immo light taped off
Hi Sven please DM me in the FIS cluster care page for prices (btw I'm in Australia)
How to get the screen? I am in Morocco.
Hi. Go to facebook.com/groups/3DcolorMFD/
Is this the same for the mk1 tt looks very similar, also I want to do this modification since my lcd is burnt out in my tt, where do I order this so I can install?
The Audi TT actually has a lot more connections at the board and ColourMFA but yes. The basics are the same :)
There are long waiting lists for me you can also head to ColourMFA.ru
@@ianpgonzaga the link is saying server not found 🥺
@@radonvon3120 ColorMFA.ru
Sorry spellcheck !
Could I add different needles while doing this, do other VAG car ones fit?
Yeah you can change the needles when re installing. Other from the same family should fit.
Brilliant now to find some aha it seems they are hard to buy without buying a full set of clocks
@@JDNSAUDIS yeah it's tricky at the moment. The kits are from Russia
Where i can buy this ColorMFA?
ColorMFA.ru
Check out the forums sections
@@ianpgonzagathx, how much do you paid for yours?
@@ez5959 the kits USED to be $225USD. You will see the price has gone up since then... inflation 👍
@@ianpgonzaga thank you!
Where can you buy the mfd?
They haven't been made in years but check out ColorMFA.ru forums and you might see a nice update.
Is the separating of the dials from the cluster the same for the mk4 r32? Thanks
Hey there. Yes. Same steps.
@@ianpgonzaga thanks pal
@@ianpgonzagahi again buddy. Got the cluster out no problem and clear screen separated but I can’t for the life of me get the needles to come off? Is there a special procedure on the R32 or just a case of pulling upwards very hard? I’m so scared I break one doing that. Please help buddy thanks
@@khsmith6242 yep just need to pull them off. It's a good sign yours are tight. Means they shouldn't slip and self adjust when being reinstalled.
@@ianpgonzaga any tips at all to pry them off as they will not budge. Thanks dude
hello mate, don't even have a half display in my 2005 1.8t Skoda octavia mk1 vrs, but its the same VDO, will it work, any help would be appreciated.
hey VERTEX - yeah it'll work in there. Does your wiper stalk have the control buttons already?
@@ianpgonzaga Yes, control buttons are on wiper stalk.
@@vertex5297 nice. One less thing to install! LOL
@@ianpgonzaga No worries mate, already doing lots of wire soldering/desoldering stuff, will do this also. so where to start, where to order the parts? Thanks for the support.
@@ianpgonzaga No worries mate, if it can be done, just tell me where to start, where to buy parts?
Can i put on 1998 golf 4 tdi ?
Yep it should work as long as you have the controls/buttons on the wiper stalk
Hi where do you can buy it ? Tks
Hello. Sold out at the moment sorry. Will try find another option soon.
@@ianpgonzagaare you still sold out?
@@matk22I can only recommend FIS control or 3d ColorMFD which are available.
facebook.com/groups/3DcolorMFD/
fis-control.de/fis_control_mmi_en.html
Please can you help me with manual how to install it
Please 🙏
Hi :)
Please see following link and choose your car.
wiki.colormfa.ru/installation
hi where can i get the toolkit
Hi Edgar. These are sold out but search online for 3d ColorMFD. You should find an option with those people.
Where can i buy the kit?
Hey there usually I can help with ordering. They're currently not being supplied (they're from Russia)
@@ianpgonzaga When will it be in stock? HELP PLEASE
@@ianpgonzaga OR OTHER OPTION
@@ervin5158 hi. I'm not sure. They're hard to order now. It's like supply is paused. Other options coming soon. Check out my fis cluster care page for more info.
The link isnt working
oops thank you for notifying me! It's now fixed.