2022 Subaru Forester How to Hardwire Dashcam Easy Install
Вставка
- Опубліковано 15 лип 2024
- This is an easy, clean and fast install method for hard wiring and hiding the wires to your dashcam. It took me less than 45 minutes to complete this install. This is a 2022 Forester Limited and I am hardwiring a Garmin Dashcam. You would need a hardwire harness to match your dashcam along with the ATM-LP fuse tap shown in this video. Feel free to post a question in the comments section.
Hardwire Dashcam Kit: Check for compatibility with your dashcam. amzn.to/3LDrTca
Mini ATM fuse tap: amzn.to/3ONPqbE
Equipment used in the shooting of this video. Please support my humble channel by using these links. It doesn't cost you anymore but helps support this channel!
DJI Osmo 5 Smartphone Gimbal Stabilizer : amzn.to/3R9u8HR
Samsung S21 Ultra 5g: amzn.to/3PAi4i9
FIFINE Studio Condenser USB Microphone: amzn.to/3sNkZu8
DJI Pocket 2 Creator Combo: amzn.to/3NAU397
Without Creator Bundle: amzn.to/39LR9jd
DJI Extension Rod for Pocket/Selfie Stick: amzn.to/3wLLscC
Mini Tripod: amzn.to/3wKW6QR
Video Editing Software: filmora.wondershare.com/invit...
Music:
Kerosene Creek by Casey Parnell amzn.to/3DYucpJ
Hardwire Dashcam Kit: Check for compatibility with your dashcam. amzn.to/3LDrTca
Mini ATM fuse tap: amzn.to/3ONPqbE
Glad I found you. I have a 2022 OBW and have been trying to find a way to mount a camera without interfering with the Eyesight
@@carlcolvin8320 9 months in and zero problems. Good luck with your install! If nothing else you will probably need the fuse taps above. Appreciate you using my associate link. Doesn't cost you anymore but sends me a very small commission to help support this channel.
Great video. You are talking about the actions use panels, etc. not the blah blah about the camera. Thank you for the video!
You're welcome!
Very helpful, thanks for taking the time to explain the details. It's appreciated!
You're welcome!
This is the best for someone who do not want to even touch the airbag.
Very helpful and detailed video. I appreciate you taking the time to go over little things like where the clips are and where to route the wire into the fuse box.
Glad to help! Please use the associate links below if you need any of the materials listed!
This is the most detailed instructions I’ve seen. I’m installing a dashcam on my 2018 Forester and I’ll use your video as my guide. Thank you for sharing your knowledge with us. A like & subscribe is the least I could do for you sharing it.😊
Thank you. Glad to help! Links in the description for some things you may need for the job.
Fantastic work! Thanks a lot for taking the time to create this video tutorial.
Best install video I’ve found, nice job!
Thank you Straight Shooter! Please don't forget to subscribe. I'm close to that all important 500!
Thanks for the very detail installation instructions. I like that each step is illustrated in detail. This is extremely important for newbie like me as seeing them done slowly helps improving my confidence. I wish your video also shows how to run the wiring for a rear camera too.
Thank you sir! Glad to help. There are links in the description to some of the things you may need for the install
@@californiahikebike I have just finished installing the front and back cameras. Fyi, having a fishing cable will help a lot when installing the back camera, specifically when threading the wire through the hatch weather grommet.
Thank you so much! Your instructions are very detailed and helpful.
You're welcome! Don't forget the link to the hardwire kit in the description if you don't have it already. Helps to support my work on this channel!
Hell…this is great. We have a new Forester on order and I will be taking the dash cam out the outback that it is replacing and putting it in there. I currently just run the cable to the back of the car to the 12v outlet there…on our crosstrek too. Maybe I will do this with the forester…Great DIY. I will put a link to you video in the forester forum.
Awesome, appreciate it Stephen! Hey don't forget to subscribe...really helps me out!
Great video!! Very helpful. I especially appreciated how you showed how to open the panels without breaking the clips.
Glad it helped!
Thank your guidance successfully completed the camera installation on my subaru forster 🙏🏻
Cool! Glad to help!
Finished my dash cam install yesterday. Put a VIOFO A139 2 channel into a 2023 Subaru Forester Touring. The absolute hardest part was getting the fuse tap into the fuse slot. That took 2 hours. I guess it just took the right amount of brut force. I was worried I was going to break the whole fuse panel. I had the exact same P9 panel in your video and used the same empty slot you did. Everything else went very smoothly in large part because of your video. I think the rest took 1 hour. I did a rear cam and a Powercell 8 instead of drawing from the car battery for parking mode. Thanks so much for taking the time and for saving me likely hours of time trying to figure things out. Oh...also did the same A-Pillar tie down you did just to not mess with that airbag.
That's awesome! Glad I could help and you found it to be useful. Yeah, I didn't want to mess with that airbag! Hey don't forget to like and subscribe. Trying to get to 1,000 subscribers!
Took me 7 seconds. The hardest part was extracting those damn small fuses. There's a white plastic fuse puller in the engine compartment fuse panel which made it take about a minute.
Excellent and simple video!
Thank! Glad to help!
Thank you, clear explanation. Very helpful.
You're welcome! Glad to help.....
Thank you for this video!
You're welcome! Thanks for the subscribe!
"Load" is being confused with hot. Fuses themselves don't have electrical polarity, but may have mechanical polarity. Fuse taps have polarity to either daisy chain from or to daisy chain from the existing hot side. If wired incorrectly, the existing fuse will be in series with the addon fuse. When wired correctly, both fuses will share a common hot side. It's also imperative to check the voltage on the hot side to be sure it matches the expected input range of the DC buck converter (to USB usually) supplied in the hardwired kit.
Great Find , I willbe doing it on Subaru F 2022. good taht i dont have to test any thing. THANKS
Hey glad to help! Don't forget the fuse tap: Mini ATM fuse tap: amzn.to/3ONPqbE
great video. planning on doing this exact install on my 22 limited next week.
Nice! Don't forget some of the stuff you may need. If you haven't already ordered, some handy affiliate links are in the comments. Doesn't cost you anymore but helps support the channel!
@@californiahikebike i’d love to support! thanks
@@recgobears Thank you! Merry Christmas!
When you disconnect the negative battery terminal, securely place something non-conductive over it; I modified a beer cozy to do this. Leaving the negative cable loose under the hood as you're moving around inside the car means it's free to move about and touch something metal, thus grounding the DC circuit and defeating the purpose of disconnecting it.
I like that. I propped it securely against the side of the battery booking it against the battery tie down. But you can't be too careful.
The way to do this for parking coverage is to use a fused circuit that's powered with the ignition off, but ideally to also install a toggle switch on the positive side between the fuse and the device. That way, you can choose to de-power the dash cam when it's not needed, such as when you park in your own garage. If possible, install the toggle switch next to your start button so it's easy to just click on or off as needed as you start and stop the engine.
For those that want that functionality good advice. I like to keep it simple. The one time I forget to flip the toggle is the one time Murphy's law kicks in! Lol
@@californiahikebike It can happen, but you quickly find yourself trained. At first, I have revisited my parked car a few times to make sure I left the switch in the right position.
The "load" side is the side with the wire (that goes to your load) the hot/feed side is the one opposite the wire that needs to go to power from the car. Nice video though!
I may have used the wrong terminology but I'll stand by what I meant as far as what side goes where. The hot side coming into the fuse tap needs to be away from the wire as shown in the video but I understand what you are saying as well. Thanks for stopping by and commenting! For those interested I just found this video which explains this subject in depth. ua-cam.com/video/nasuPwpr55I/v-deo.html
@@californiahikebike Yes - the orientation you showed in the video was indeed correct - jus not the terminology used.
Yep thanks!
I think it would be tough, but I may have a go with this using my new dash cam on my 2018 Subaru Impreza
It's actually a pretty easy install. I doubt if much different on the 2018....good luck!
What model Garmin dashcam are you using? Great video, very thorough, thank you very much!
Glad you liked! I use the Dashcam 20 that has GPS. Creates great video: amzn.to/3LIzzvl
Great video! Thanks so much! Question. Can you route the wire above the air bag and then down the molding the rest of the way? Maybe route it under the top of the air bag if you can't get it entirely above the mechanism? It might be easier than removing the whole panel.
Thanks for the subscription! I suppose you could but I didn't want to wrap it over the top and possibly interfere with it's operation.
Definitely not. Nothing should impede the air bag when activated in a crash.
New forester arrived and I’m ready to start this. The fuses in the car are low profile mini fuses but for your tap you used a mini…not low profile? I was not sure on that. I’m using a thinkware camera so I will need two fuse taps.
If I remember correctly it was a mini ATM fuse tap like this: amzn.to/3ONPqbE
One concern not discussed is the effect of disconnecting the battery on the car's electronics. Will the settings all return to the factory default or land somewhere in limbo or not be affected at all?
It did not affect my settings when I did my install.
Can we connect the Dashcam wires to the wires in the celling panel you opened? Having said that we need to use a extension plug so we dont need to run the wires all the way down to the 12V socket. What do you think?
This kind of set up might work for you: ua-cam.com/users/shortslQIkNQATUzo?si=gcEnsMEpph3TXttT
I have a 2021 forester premium. My console is set up a little different from yours. I’m nervous about messing with the eyesight since mine is all one piece. Do you have any advice for how I should do mine?
So this is what I did later with my Toyota. I'm sure they make the quick connect harness for your Subie. Literally 5 minutes to install! ua-cam.com/video/Rb5cnMr4H0M/v-deo.html
I think it's the A pillar cover, not the rocker panel. The rocker panel is the portion of the body that is below the door sill.
Thanks!
I was going to place my cam in the same position that you did but looking at the owner manual again, Subaru suggests that nothing is placed there due to the EyeSight cameras. Have you found any issues with that placement? Thanks much!
With this model year the eyesight cams are enclosed all the way to the windshield. It didn't make sense to me and I assumed it was leftover from the previous year's manual. I never had any problem at all.
hey mate what fuses do you use if you want the camera on with motor acc off?
Check your manual for one that's always "hot." I traded my Subie because I needed a truck for my property or I'd look it up for you!
I'm installing a dash cam also on a 2022 Forester Limited, is there any interference with the onboard EyeSight cameras
Not at all. The eyesight is flush with the windshield and there is no interference. That said, I had the exact same setup in my 2018 Forester which was not flush with the windshield with the eyesight system and there was zero interference as well.
@@californiahikebike thank you
@@victorvigario4109 Certainly...please throw me a subscription if you haven't already. Would really help out!
Incredible video, thank you. Clear, thorough, and on point. Couple of questions.
If I am just routing wire for 12V instead of hardwiring, is there any issue with wire resting up against airbag area?
Second question is do I need to disconnect the battery terminal just to shove the wire behind the A-pillar using the spatula tool that comes with dashcams?
I'm notca mechanic but always practice safety. I recommend staying clear of the airbag. Why take any chances? Same principal with battery disconnect. Safety first.... good luck!
@@californiahikebike thanks for the advice. I abandoned the whole idea and am returning the camera.
@Dactylonian You might check this setup. My understanding it's available on the Subie's now. ua-cam.com/video/Rb5cnMr4H0M/v-deo.html
How about wiring it so it always stays on?
That would be pretty easy. Just find a fuse in the panel that's always hot. But if you travel by air and leave your car at the airport like me, it could be a dead battery problem depending on how long you are gone.
Just curious as to why you wouldn't simply tap the wires under the light assembly?
Which light assembly? When do you want the camera on?
@@californiahikebike ua-cam.com/video/aHe6gT7dvu4/v-deo.html Pardon the french. I have a 2022 Forester and really learned a lot from your video, but this seems way easier. The power to the mirror is also only on with the car.
@@paulhartzell4587 I prefer not tapping into any other electronic devices that are still under warranty that they can blame on my work. To each his own I suppose. This is a simple job.
California Hike. I'm just a random internet person with a 2020 Forester Sport. I have a super simple request but so far nobody is willing to take 15 seconds of their day to help me. Basically, I just want to see what your engine bay fuse panel looks like. I'm missing some fuses and I'm curious if they're supposed to be empty or I need some fuses. I'm dealing with a parasitic battery draw issue so trying to get as much info as possible. Is it possible for you to take a pic?
My friend I would be glad to but I traded my Subie! Can't do it!
@@californiahikebike Got it, thanks.
Has anybody had any issues with eyesight erroring with this positioning?
On the 2022 the eyesight is flush with the windshield vs previous models that were set back from the windshield. I haven't had any issues at all with the eyesight and I utilize it a lot. I can tell you that on my 2019 Forester, I did the same setup and had no eyesight interference.
@@californiahikebike I can second this. I installed shortly after I asked and this video was a great help! Thanks.
@@tonyb1360 Awesome! Glad to help!
Why not buy a $30 Dongar and use your mirror power? Installs in 5 minutes and don’t have to run cables or hardwire.
Yeah I did that with my Tacoma but didn't want to mess with the electronics on the Subaru eye system. Wasn't sure so went with sure thing and I'm happy I did.
Why the hell do these Subaru's not have a usb port up near the mirror nowadays, come on Subaru, that's pathetic.
Do any makes?