How To Install DSP5 (SOTF) Switch On LML Duramax
Вставка
- Опубліковано 26 сер 2023
- This is how you would install a DSP5 or SOTF switch on an LML duramax 2011-2016 for EFI Live. Im not sure if the EZ Lynk SOTF switch is the same or not.
TUNER/DELETE KIT HERE shrsl.com/4ke0v
Support the channel with some merch! darkirondiesel.com
Follow the instagram darkirondiesel
Thanks for watching - Авто та транспорт
TUNER/DELETE KIT HERE shrsl.com/4ke0v
MERCH HERE darkirondiesel.com
Thank you. I’ve had the switch for months. You have the best walk through video.
I have already done with to my 16 lml several years ago. But i enjoy your content so here I am 😅.
Thanks I appreciate it!
Another great video! Looking forward to seeing more content on Your Cummins! Keep up the good work and have a great week my friend.👍
Thank you my friend!
Thanks for the video! Helped save me a ton of time and unnecessary codes!
Hey brotha i just barely received the efi live tuner with sotf switch from tuner depot and a 5" straight pipe no muffler ProFlo exhaust from diesel dudes ill be installing in the next few days. Thanks for the video man this was perfectly detailed and super helpful. Ill keep yall posted, Truck is a 2015 lml with 49000 miles on it. Wont get out of re gen or get rid of check engine light. Only had the truck since 40,000 miles. Check engine light has been going on and off and gets put into high idle mode been stuck in that for about 3-4 weeks now. Had no choice but to delete it.
How’s the kit going so far?
great video i appreciate it
On a lml Duramax when you install the soft switch to check to make sure its working. When you switch through the tunes these should be some sort of fuel gauge reading that will change is this something you have heard of or know about? trying to make sure i change the right pins in my ecm for 13 lml. Any knowledge would be appreciated. Thanks and great vid as always man.
how would you get antifreeze and oil mix from a failed head gasket out of the block?
Hey man, I got a ? and wanted to know your thoughts. I'm looking at getting a Nissan Titan with the 5.0 Cummins. Are they good diesel engines?
Hey man, can you show video of replay turbos from Duramax LML?
Thank you man
Great videos as always, I’m from Alberta ,don’t hold that against me haha
Got an 04 and a half dodge,love my truck ,but its giving me greif,Can you help ?
How do you give horse power ? The shop gave me 200hp ? I only drive in first switch. So why 200hp it's a 3500 Ram duel 2020.
Diesel god of Canada love the videos and the content brother I’m not sure if you have any ties to anyone in the states but I need a bed for a 06 f350 SRW Shortbed my bed rails left the chat and no longer exist the 2x8’s that home depot Carries only work for so long until the bed floor breaks each day lol so if you have a contact please let me know I definitely would appreciate it love the channel.
Haha thank you! Unfortunately I do not have any contacts but if I were you I’d put a “wanted” add on Facebook marketplace or something similar. Someone may have one laying around.
@darkirondiesel I'll end up doing that thanks again for the awesome content
Do you have a video of the install of a SOTF switch on a RAM Cummins 6.7? Thanks.
Just posted one on installing an ez lynk sotf switch on a 2019-2021
He moved the TCM because the factory location is on the radiator.. Coincidentally, these TCM’s are failing due to heat. Guys are having a difficult time finding replacements also. Chip shortage or something along those lines. 👍 (the more ya know)
Is the lowest level on the SOTF plain stock or level one tune? So once it's installed your tuned and no option in the switch to have no tune? Thanks
It depends how the tuning company does it where you get the tunes from, but typically a level 1 setting is stock power (since this truck is deleted it’s not a full “stock” tune because it still had emissions off) then the power levels increase as the switch gets turned up.
What software are you using on the laptop?
So I have a quick question. I know you said this truck is a 2011 but the front end bumpers and grill are not 2011. The bumpers are from 7-10. Are we sure it’s a 2011 lml?
That’s what I was thinking and the lml have two alternators
I installed DSP 5 on my LML and its kind of a waste if time unless your towing with the truck IMO.... The +150hp (#4) DSP file feels nothing like a single +150hp file. I felt like the truck made less power & the trans hated my guts when i changed tunes. Single +200hp file with TCM tuning & added pressure is all i run now. Now im bummed i put a hole in my dash...
Hello, I bought a 2015 gmc duramax and the dsp switch has 10 clicks and have no difference between 1-10. Do I have a bad switch, the wiring looks like your video. I have a efi live controller but not sure what to do. It shows no tunes available. Any help would be much appreciated. Thanks
Most likely the first 5 positions will be the tunes, everything after the 5th position will be the same.
Like the 10th position will be the same as the 5th position If that makes sense
There is a washer with a pin that limits the switch to 5. It’s suppose to go on the switch first before installing in the panel.
That lock position washer fell off on me, and now I have more than 5 clicks. What can I do😢
Put it back in, if you lost it then you need to somehow put something in the hole to set it to the number of clicks you want. Or just use it like that and remember that tune 5+ are all the same tune
Put it back in, if you lost it then you need to somehow put something in the hole to set it to the number of clicks you want. Or just use it like that and remember that tune 5+ are all the same tune
Soft is switch on fly tuning.
Correct, gold star for you Colby ⭐️
1